RESUMEN
STUDY DESIGN: Retrospective cohort study. OBJECTIVE: To compare the early radiographic adjacent segment degeneration (R-ASD) and regional lumbar sagittal alignment after midline lumbar interbody fusion (MIDLIF) with cortical bone trajectory (CBT) screw fixation (CBT-MIDLIF) and posterior lumbar interbody fusion (PLIF) with the traditional pedicle screw fixation (PS-PLIF) during long-term follow-up. METHODS: All patients who underwent CBT-MIDLIF or PS-PLIF were identified by a retrospective consecutive case review. Radiographic parameters in cephalad adjacent segment (L3/4), including intervertebral space height (ISH), foraminal height (FH), foraminal width (FW), range of motion were assessed. Lumbar lordosis (LL), sacral slope (SS), L4-L5 Cobb angle, Cobb angle of the intervertebral space at L4-L5, and height of the anterior and posterior edges of the intervertebral space at L4-L5, were measured and compared on preoperative, postoperative, and 3-year follow-up radiographic evaluation. RESULTS: Seventy-four patients underwent CBT-MIDLIF (CBT-MIDLIF group) and 114 patients underwent conventional PS-PLIF (PS-PLIF group). ISH, FH and FW were significantly smaller at 6-month follow-up than before operation with PS-PLIF (p < 0.001) but showed no significant changes with CBT-MIDLIF (p > 0.05). At the last follow-up, the changes in cephalad R-ASD parameters were more remarkable after PS-PLIF than after CBT-MIDLIF (p < 0.01). LL and SS were significant larger at the last follow-up than before operation in both groups (p < 0.001). Regarding long-term outcomes, the symptoms caused by degenerative spinal disorders significantly improved in both groups (p < 0.01). CONCLUSION: CBT-MIDLIF had less radiographic degeneration in the adjacent segment than PS-PLIF at 3-year follow-up. The lumbar sagittal alignment could be improved significantly and the surgical outcomes were satisfactory after either CBT-MIDLIF or PS-PLIF.
Asunto(s)
Degeneración del Disco Intervertebral , Tornillos Pediculares , Fusión Vertebral , Hueso Cortical , Estudios de Seguimiento , Humanos , Degeneración del Disco Intervertebral/cirugía , Vértebras Lumbares/diagnóstico por imagen , Vértebras Lumbares/cirugía , Estudios Retrospectivos , Resultado del TratamientoRESUMEN
OBJECTIVE: To compare the safety and accuracy of cortical bone trajectory screw placement between the robot-assisted and fluoroscopy-assisted approaches. METHODS: This retrospective study was conducted between November 2018 and June 2020, including 81 patients who underwent cortical bone trajectory (CBT) surgery for degenerative lumbar spine disease. CBT was performed by the same team of experienced surgeons. The patients were randomly divided into two groups-the fluoroscopy-assisted group (FA, 44 patients) and the robot-assisted group (RA, 37 patients). Robots for orthopedic surgery were used in the robot-assisted group, whereas conventional fluoroscopy-guided screw placement was used in the fluoroscopy-assisted group. The accuracy of screw placement and rate of superior facet joint violation were assessed using postoperative computed tomography (CT). The time of single screw placement, intraoperative blood loss, and radiation exposure to the surgical team were also recorded. The χ2 test and Student's t-test were used to analyze the significance of the variables (P < 0.05). RESULTS: A total of 376 screws were inserted in 81 patients, including 172 screws in the robot-assisted group and 204 pedicle screws in the fluoroscopy-assisted group. Screw placement accuracy was higher in the RA group (160, 93%) than in the FA group (169, 83%) (P = 0.003). The RA group had a lower violation of the superior facet joint than the FA group. The number of screws reaching grade 0 in the RA group (58, 78%) was more than that in the FA group (56, 64%) (P = 0.041). Screw placement time was longer in the FA group (7.25 ± 0.84 min) than in the RA group (5.58 ± 1.22 min, P < 0.001). The FA group had more intraoperative bleeding (273.41 ± 118.20 ml) than the RA group (248.65 ± 97.53 ml, P = 0.313). The radiation time of the FA group (0.43 ± 0.07 min) was longer than the RA group (0.37 ± 0.10 min, P = 0.001). Furthermore, the overall learning curve tended to decrease. CONCLUSIONS: Robot-assisted screw placement improves screw placement accuracy, shortens screw placement time, effectively improves surgical safety and efficiency, and reduces radiation exposure to the surgical team. In addition, the learning curve of robot-assisted screw placement is smooth and easy to operate.
Asunto(s)
Tornillos Pediculares , Procedimientos Quirúrgicos Robotizados , Robótica , Fusión Vertebral , Cirugía Asistida por Computador , Hueso Cortical , Fluoroscopía/métodos , Humanos , Vértebras Lumbares/diagnóstico por imagen , Vértebras Lumbares/cirugía , Estudios Retrospectivos , Procedimientos Quirúrgicos Robotizados/efectos adversos , Procedimientos Quirúrgicos Robotizados/métodos , Fusión Vertebral/efectos adversos , Fusión Vertebral/métodos , Cirugía Asistida por Computador/efectos adversosRESUMEN
BACKGROUND AND OBJECTIVE: The Cortical Bone Trajectory (CBT) technique provides an alternative method for fixation in the lumbar spine in patients with osteoporosis. An accuracy CBT screw placement could improve mechanical stability and reduce complication rates. PURPOSE: The purpose of this study is to explore the accuracy of cortical screw placement with the application of implanted spinous process clip (SPC) guide. METHODS AND MATERIALS: Four lumbar specimens with T12-S1 were used to access the accuracy of the cortical screw. The SPC-guided planning screws were compared to the actual inserted screws by superimposing the vertebrae and screws preoperative and postoperative CT scans. According to preoperative planning, the SPC guide was adjusted to the appropriate posture to allow the K-wire drilling along the planned trajectory. Pre and postoperative 3D-CT reconstructions was used to evaluate the screw accuracy according to Gertzbein and Robbins classification. Intraclass correlation coefficients (ICCs) and Bland-Altman plots were used to examine SPC-guided agreements for CBT screw placement. RESULTS: A total of 48 screws were documented in the study. Clinically acceptable trajectory (grades A and B) was accessed in 100% of 48 screws in the planning screws group, and 93.8% of 48 screws in the inserted screws group (p = 0.242). The incidence of proximal facet joint violation (FJV) in the planning screws group (2.1%) was comparable to the inserted screws group (6.3%) (p = 0.617). The lateral angle and cranial angle of the planned screws (9.2 ± 1.8° and 22.8 ± 5.6°) were similar to inserted screws (9.1 ± 1.7° and 23.0 ± 5.1°, p = 0.662 and p = 0.760). Reliability evaluated by intraclass correlation coefficients and Bland-Altman showed good consistency in cranial angle and excellent results in lateral angle and distance of screw tip. CONCLUSIONS: Compared with preoperative planning screws and the actually inserted screws, the SPC guide could achieve reliable execution for cortical screw placement.
Asunto(s)
Tornillos Pediculares , Fusión Vertebral , Humanos , Fusión Vertebral/métodos , Reproducibilidad de los Resultados , Vértebras Lumbares/diagnóstico por imagen , Vértebras Lumbares/cirugía , CadáverRESUMEN
Background: Posterior long spinal fusion was the common procedure for adult spinal deformity (ASD). Although the application of sacropelvic fixation (SPF), the incidence of pseudoarthrosis and implant failure is still high in long spinal fusion extending to lumbosacral junction (LSJ). To address these mechanical complications, advanced SPF technique by multiple pelvic screws or multirod construct has been recommended. This was the first study to compare the biomechanical performance of combining multiple pelvic screws and multirod construct to other advanced SPF constructs for the augmentation of LSJ in long spinal fusion surgery through finite element (FE) analysis. Methods: An intact lumbopelvic FE model based on computed tomography images of a healthy adult male volunteer was constructed and validated. The intact model was modified to develop five instrumented models, all of which had bilateral pedicle screw (PS) fixation from L1 to S1 with posterior lumbar interbody fusion and different SPF constructs, including No-SPF, bilateral single S2-alar-iliac (S2AI) screw and single rod (SS-SR), bilateral multiple S2AI screws and single rod (MS-SR), bilateral single S2AI screw and multiple rods (SS-MR), and bilateral multiple S2AI screws and multiple rods (MS-MR). The range of motion (ROM) and stress on instrumentation, cages, sacrum, and S1 superior endplate (SEP) in flexion (FL), extension (EX), lateral bending (LB), and axial rotation (AR) were compared among models. Results: Compared with intact model and No-SPF, the ROM of global lumbopelvis, LSJ, and sacroiliac joint (SIJ) was decreased in SS-SR, MS-SR, SS-MR, and MS-MR in all directions. Compared with SS-SR, the ROM of global lumbopelvis and LSJ of MS-SR, SS-MR, and MS-MR further decreased, while the ROM of SIJ was only decreased in MS-SR and MS-MR. The stress on instrumentation, cages, S1-SEP, and sacrum decreased in SS-SR, compared with no-SPF. Compared with SS-SR, the stress in EX and AR further decreased in SS-MR and MS-SR. The most significantly decreased ROM and stress were observed in MS-MR. Conclusion: Both multiple pelvic screws and multirod construct could increase the mechanical stability of LSJ and reduce stress on instrumentation, cages, S1-SEP, and sacrum. The MS-MR construct was the most adequate to reduce the risk of lumbosacral pseudarthrosis, implant failure, and sacrum fracture. This study may provide surgeons with important evidence for the application of MS-MR construct in the clinical settings.
RESUMEN
(1) Background: The three-dimensional printing (3DP) technique has been reported to be of great utility in spine surgery. The purpose of this study is to report the clinical application of personalized preoperative digital planning and a 3DP guidance template in the treatment of severe and complex adult spinal deformity. (2) Methods: eight adult patients with severe rigid kyphoscoliosis were given personalized surgical simulation based on the preoperative radiological data. Guidance templates for screw insertion and osteotomy were designed and manufactured according to the planning protocol and used during the correction surgery. The perioperative, and radiological parameters and complications, including surgery duration, estimated blood loss, pre- and post-operative cobb angle, trunk balance, and precision of osteotomy operation with screw implantation were collected retrospectively and analyzed to evaluate the clinical efficacy and safety of this technique. (3) Results: Of the eight patients, the primary pathology of scoliosis included two adult idiopathic scoliosis (ADIS), four congenital scoliosis (CS), one ankylosing spondylitis (AS), and one tuberculosis (TB). Two patients had a previous history of spinal surgery. Three pedicle subtraction osteotomies (PSOs) and five vertebral column resection (VCR) osteotomies were successfully performed with the application of the guide templates. The main cobb angle was corrected from 99.33° to 34.17°, and the kyphosis was corrected from 110.00° to 42.00°. The ratio of osteotomy execution and simulation was 97.02%. In the cohort, the average screw accuracy was 93.04%. (4) Conclusions: The clinical application of personalized digital surgical planning and precise execution via 3D printing guidance templates in the treatment of severe adult rigid deformity is feasible, effective, and easily generalizable. The preoperative osteotomy simulation was executed with high precision, utilizing personalized designed guidance templates. This technique can be used to reduce the surgical risk and difficulty of screw placement and high-level osteotomy.
RESUMEN
STUDY DESIGN: Retrospective case-control study. OBJECTIVE: We aimed to evaluate the value of 3-dimensional printing (3DP) spine model in the surgical treatment of severe spinal deformity since the prosperous development of 3DP technology. METHODS: Severe scoliosis or hyper-kyphosis patients underwent posterior fixation and fusion surgery using the 3DP spine models were reviewed (3DP group). Spinal deformity surgeries operated by free-hand screw implantation during the same period were selected as the control group after propensity score matching (PSM). The correction rate, pedicle screw accuracy, and complications were analyzed. Class A and B screws were defined as accurate according to Gertzbein and Robbins criteria. RESULTS: 35 patients were enrolled in the 3DP group and 35 matched cases were included in the control group. The perioperative baseline data and deformity correction rate were similar between both groups (P > .05). However, the operation time and blood loss were significantly less in the 3DP group (296.14 ± 66.18 min vs. 329.43 ± 67.16 min, 711.43 ± 552.28 mL vs. 1322.29 ± 828.23 mL, P < .05). More three-column osteotomies (Grade 3-6) were performed in the 3DP group (30/35, 85.7% vs. 21/35, 60.0%. P = .016). The screw placement accuracy was significantly higher in the 3DP group (422/582, 72.51% vs. 397/575, 69.04%. P = .024). The screw misplacement related complication rate was significantly higher in the free-hand group (6/35 vs. 1/35, P = .046). CONCLUSIONS: The study provided solid evidence that 3DP spine models can enhance surgeons' confidence in performing higher grade osteotomies and improve the safety and efficiency in severe spine deformity correction surgery. 3D printing technology has a good prospect in spinal deformity surgery.
RESUMEN
A healthy cervical spine with normal movement is the basis of many daily activities and is essential for maintaining a good quality of life. However, the alignment, fusion, and structure of the cervical spine can change for various reasons, leading to cervical deformity, mainly kyphosis. Approximately 5%â20% of spinal infections in the cervical spine cause cervical deformity. The deformity can recover early; however, the disease's long-term existence or the continuous action of abnormal stress may lead to intervertebral fusion and abnormal osteophytes. Many gaps and controversies exist regarding infectious cervical deformities, including a lack of clear definitions and an acceptable classification system thereby requiring further research. Moreover, there is no consensus on the indications for postinfectious cervical deformity associated with Mycobacterium tuberculosis, Staphylococcus aureus, and Brucellosis. Therefore, we reviewed and discussed the incidence, clinical manifestations, changes, and treatment of infectious and inflammatory secondary cervical deformities from common to rare to provide a theoretical basis for clinical decision-making.
RESUMEN
OBJECTIVE: Achieving solid fusion of the lumbosacral junction continues to be a challenge in long-segment instrumentation to the sacrum. The purpose of this study was to test the condition of adding sacral anchors through an S1 alar screw (S1AS) and multirod construct relative to using S1 pedicle screws (S1PSs) alone with sacroiliac fixation in lumbosacral junction augmentation. METHODS: Seven fresh-frozen human lumbar-pelvic spine cadaveric specimens were tested under nondestructive moments (7.5 Nm). The ranges of motion (ROMs) in extension, flexion, left and right lateral bending (LB), and axial rotation (AR) of instrumented segments (L3-S1); the lumbosacral region (L5-S1); and the adjacent segment (L2-3) were measured, and the axial construct stiffness (ACS) was recorded. The testing conditions were 1) intact; 2) bilateral pedicle screw (BPS) fixation at L3-S1 (S1PS alone); 3) BPS and unilateral S2 alar iliac screw (U-S2AIS) fixation; 4) BPS and unilateral S1AS (U-S1AS) fixation; 5) BPS and bilateral S2AIS (B-S2AIS) fixation; and 6) BPS and bilateral S1AS (B-S1AS) fixation. Accessory rods were used in testing conditions 3-6. RESULTS: In all directions, the ROMs of L5-S1 and L3-S1 were significantly reduced in B-S1AS and B-S2AIS conditions, compared with intact and S1PS alone. There was no significant difference in reduction of the ROMs of L5-S1 between B-S1ASs and B-S2AISs. Greater decreased ROMs of L3-S1 in extension and AR were detected with B-S2AISs than with B-S1ASs. Both B-S1ASs and B-S2AISs significantly increased the ACS compared with S1PSs alone. The ACS of B-S2AISs was significantly greater than that of B-S1ASs, but with greater increased ROMs of L2-3 in extension. CONCLUSIONS: Adding sacral anchors through S1ASs and a multirod construct was as effective as sacropelvic fixation in lumbosacral junction augmentation. The ACS was less than the sacropelvic fixation but with lower ROMs of the adjacent segment. The biomechanical effects of using S1ASs in the control of long-instrumented segments were moderate (better than S1PSs alone but worse than sacropelvic fixation). This strategy is appropriate for patients requiring advanced lumbosacral fixation, and the risk of sacroiliac joint violation can be avoided.
Asunto(s)
Tornillos Pediculares , Fusión Vertebral , Humanos , Sacro/cirugía , Vértebras Lumbares/cirugía , Ilion/cirugía , Rango del Movimiento Articular , Rotación , Fenómenos Biomecánicos , CadáverRESUMEN
This study aimed to assess the accuracy of cortical bone trajectory (CBT) screws placement guided by a spinous process clamp (SPC) guide. A total of 32 patients who received single-level midline lumbar fusion (MIDLF) surgery between June 2019 and January 2020 were retrospectively analyzed and divided into free-hand (FH) and SPC-guided groups according to the surgical approach. In the FH group, CBT screws was implanted with the assistance of fluoroscopy, while in the SPC group, CBT screws was implanted using the SPC navigator hardwire. A total of 128 screws were assessed in this study, with higher rates of clinically acceptable screw placement (grades A and B) and grade A screws in the SPC group than in the FH guide group (92.2% vs. 79.7%, P = 0.042 and 54.7% vs. 35.9%, P = 0.033, respectively). Misplacement screws (grades C, D, and E) occurred more often in the FH group than in the SPC guide group (20.3% vs. 7.8%, P = 0.042). The incidence of proximal facet joint violation (FJV) was higher in the FH group than in the SPC group (15.6% vs. 3.1%, P = 0.030). The radiation dose and time in the SPC guide group were comparable to those in the FH group (P = 0.063 and P = 0.078). The average operative time was significantly longer in the SPC guide group than in the FH group (267.8 ± 45.5 min vs. 210.9 ± 44.5 min, P = 0.001). Other clinical parameters, such as the average bone mineral density (BMD), intraoperative blood loss, and postoperative hospital stay, were not significantly different. Oswestry disability index (ODI) and back pain visual analogue scale (VAS) scores were significantly improved in both groups compared with preoperatively. SPC guided screw placement was more accurate than the fluoroscopy-assisted FH technique for single-level MIDLF at L4/5. Patients undergoing SPC-guided screw placement can achieve similar clinical outcomes as the fluoroscopy-assisted FH technique.
Asunto(s)
Tornillos Pediculares , Procedimientos Quirúrgicos Robotizados , Fusión Vertebral , Cirugía Asistida por Computador , Humanos , Procedimientos Quirúrgicos Robotizados/métodos , Estudios Retrospectivos , Cirugía Asistida por Computador/métodos , Hueso Cortical/diagnóstico por imagen , Hueso Cortical/cirugía , Vértebras Lumbares/diagnóstico por imagen , Vértebras Lumbares/cirugía , Fusión Vertebral/métodosRESUMEN
STUDY DESIGN: Modified Delphi study. OBJECTIVE: The objective of this study was to establish expert consensus on the application of lateral lumbar interbody fusion (LLIF) by using the modified Delphi study. METHODS: From June 2019 to March 2020, Members of the Chinese Study Group for Lateral Lumbar Spine Surgery were selected to collect expert feedback using the modified Delphi method where 65 spine surgeons from all over China agreed to participate. Four rounds were performed: 1 face-to-face meeting and 3 subsequent survey rounds. The consensus was achieved with ≥a 70.0% agreement for each question. The recommendation of grade A was defined as ≥90.0% of the agreement for each question. The recommendation of grade B was defined as 80.0-89.9% of the agreement for each question. The recommendation of grade C was defined as 70.0-79.9% of the agreement for each question. RESULTS: A total of 65 experts formed a panelist group, and the number of questionnaires collected was 63, 59, and 62 in the 3 rounds. In total, 5 sections, 71 questions, and 382 items achieved consensus after the Delphi rounds including summary; preoperative evaluation; application at the lumbar spinal stenosis, lumbar disc herniation, lumbar spondylolisthesis, adult degenerative scoliosis, postoperative adjacent segmental degeneration, and revision surgery; complications; and postoperative follow-up evaluation of LLIF. CONCLUSION: The modified Delphi method was utilized to ascertain an expert consensus from the Chinese Study Group for Lateral Lumbar Spine Surgery to inform clinical decision-making in the application of LLIF. The salient grade A recommendations of the survey are enumerated.
RESUMEN
BACKGROUND: The purpose of this study was to access the accuracy of cortical bone trajectory screw placement guided by spinous process clamp (SPC). METHODS: Eight formalin-treated cadaveric lumbar specimens with T12-S1 were used. A total of 96 screws were implanted in eight lumbar specimens. RESULTS: In the freehand (FH) group, clinically acceptable placement (grade A and B) was 40 screws (83.3%), meanwhile 44 screws (91.7%) in the SPC guide group (p = 0.217). The grade A screws in the SPC guide group were much more than that in the FH group (n = 40 vs. n = 31, p = 0.036). The misplacement screws (grade C, D, and E) and proximal facet joint violation (FJV) in the SPC group was comparable to the FH group. CONCLUSIONS: This cadaveric study demonstrate that implanting CBT screws guided by SPC guide was more accuracy and reduces severe deviations in important directions.
Asunto(s)
Procedimientos Ortopédicos , Tornillos Pediculares , Fusión Vertebral , Humanos , Vértebras Lumbares/cirugía , Hueso Cortical/cirugía , CadáverRESUMEN
Objectives: The optimized enhanced recovery after surgery (ERAS) pathway for adolescent idiopathic scoliosis (AIS) patients has not been comprehensively described. The purpose of the study was to explore the feasibility and efficacy of an integral process of ERAS protocol in posterior spinal fusion (PSF) surgery for AIS patients without three-column osteotomy. Methods: Based on the inclusion and exclusion criteria, a total of 90 AIS patients who underwent PSF were enrolled in the study. Forty-five patients followed a traditional pathway (TP) perioperative care and 45 were treated with an ERAS protocol designed and implemented by a multidisciplinary team. Patient demographic, clinical information, surgical data, and radiographic parameters were collected and analyzed retrospectively. Results: There is no significant difference in age, gender, body mass index, preoperative hemoglobin level, Cobb angle, curve type, average correction rate, fusion segments, and screw number between ERAS group and TP group. Regarding the estimated blood loss (EBL), surgical duration, pain intensity, drainage duration, drainage volume, first ambulation time, postoperative length of stay (LOS), and the incidence of blood transfusion, they were significantly less in ERAS group than those of TP group. Conclusions: Based on our findings, we found that the implementation of a standard ERAS protocol in AIS correction surgery could result in less EBL, lower pain intensity, early ambulation, shorter LOS, and rapid rehabilitation. We recommend the widespread adoption of ERAS protocols in AIS surgery.
RESUMEN
Objectives: To analyze the stress distribution in the proximal vertebral body and soft tissue of dual growing-rod (GR) with different upper instrumented vertebra (UIV) to determine the optimal UIV. Methods: A ten-year-old male EOS case treated with GR was selected. Based on spiral computed tomography (CT) scanning performed in 0.6 mm thick slices, a finite element model (FEM) of the preoperative state (M0, the original spine state) of the patient was created. Subsequently, four models with different UIV fixations were numerically analyzed by FEM, including M1 (UIV = T1, i.e., the upper-end vertebrae (UEV) of the upper thoracic curve), M2 (UIV = T2), M3 (UIV = T3) and M4 (UIV = T4, i.e., the lower end vertebrae (LEV) of the upper thoracic curve). Displacement and maximum stress in the proximal vertebral body and soft tissue were measured and compared among the five models. Results: The spine model was fixed with the sacrum, and the gravity conditions were imposed on each vertebral body according to the research of Clin and Pearsall. The results are as follows:M4 model has the largest overall displacement, while M1 has the least displacement among the four models. Except M2, the maximum normalized stress of UIV increases with the downward movement of UIV. M1 has the lowerest annulus fibrosus stress and highest joint capsule stress, which is characterized by the vertebrae backward leaning, while M4 is the opposite. The supraspinous ligament stress of M3 and M4 is significantly higher than that of M1 and M2. This suggests that UIV downshift increases the tendency of the proximal vertebral bodies to bend forward, thereby increasing the tension of the posterior ligaments (PL). Conclusion: The UIV of the GR is recommended to be close to the UEV of the upper thoracic curve, which can reduce the stress of the proximal PL, thereby reducing the occurrence of proximal junctional kyphosis (PJK).
RESUMEN
The incidence of distraction spinal cord injury (DSCI), which results from spinal cord ischemia due to vascular compromise and spinal cord tract disturbances, remains high. Furthermore, because no ideal animal model that mimics DSCI in clinical settings is available thus far, the related molecular mechanisms underlying DSCI remain unclear. Thus, this study aimed to establish a porcine model of DSCI and investigate the neuroinflammation and apoptosis mechanisms in these pigs. Before surgery, all pigs were randomly divided into three groups: sham group, osteotomy surgery only; the incomplete distraction spinal cord injury (IDSCI) and complete distraction spinal cord injury (CDSCI) group, osteotomy plus DSCI surgery with a motor-evoked potential (MEP) amplitude decreased by approximately 75% and 100%, respectively. After surgery, modified Tarlov scoring and MRC muscle strength scoring were used to evaluate neurologic function in each group. We observed the distracted spinal cord using MRI, and then all pigs were sacrificed. Inflammatory cytokine levels in the spinal cord and cerebrospinal fluid (CSF) were also analyzed. We used immunofluorescence staining to assess the neuronal and microglial structure and function and astrocyte hyperplasia in the central DSCI lesions (T15). Western blotting was used to determine the expression of apoptosis-related proteins. Results showed that the modified Tarlov scoring and muscle strength decreased significantly in the two DSCI groups. T2-MRI showed a relative enhancement at the center of the DSCI lesions. H&E and Lxol fast blue staining revealed that spinal cord distraction destroyed the normal structure of spinal cord tissues and nerve fiber tracts, exacerbating inflammatory cell infiltration, hyperemia, and edema. The IL-1ß, IL-6, and TNF-α levels increased in the spinal cord and CSF following DSCI. Immunofluorescence staining results indicated the GFAP, Iba-1 expression increased following DSCI, whereas the NeuN expression reduced. Moreover, DSCI promoted the protein expression of P53, Bcl-2-associated X protein (Bax), and Caspase-3 in the spinal cord tissues, whereas it reduced the Bcl-2 expression. This study successfully established a porcine DSCI model that closely mimics DSCI in clinical settings, and clarified the mechanisms underlying DSCI-associated neuroinflammation and apoptosis; thus, our findings highlight potential DSCI-treatment strategies for further establishing suitable drug therapies.
RESUMEN
BACKGROUND: We sought to assess the elasticity change of the paravertebral fascia and muscle in adolescent idiopathic scoliosis patients with Lenke Type 1, 2, or 3 curves after posterior selective fusion surgery. METHODS: The shear wave elasticity imaging system was used to assess the elasticity of the thoracic paravertebral muscles and fascia both on the concave and convex sides. Three regions of interest, including the apex, upper end, and lower end of the main curve, were tested. FINDINGS: Ten female patients, with an average age of 16.6 ± 2.7 years old, were included. The average post-operation follow-up period was 9.0 ± 2.4 months. The Cobb angle was significantly corrected from 63.6 ± 12.0° to 10.7 ± 5.4° (p < 0.05). The length of the trunk increased from 40.4 ± 2.5 cm to 46.0 ± 2.8 cm (p < 0.05). The elasticity of deep fascia didn't show a significant change post-operation (p > 0.05). The elasticity of the paravertebral muscle on the concave side had a significant increase at the final follow-up (p < 0.05). The elasticity of the paravertebral muscle on the convex side also increased at the upper end (p < 0.05). The elasticity asymmetry of the deep fascia decreased, but the elasticity asymmetry of the paravertebral muscle increased at the upper end of the curve (p < 0.05). INTERPRETATION: The paravertebral muscle on the concave side is stiffer after surgery. Elastic asymmetry of paravertebral muscle increased and elastic asymmetry of the deep fascia decreased at the upper end of the curvature. Further study is needed to elucidate the mechanism by which the paravertebral soft tissue responds after surgery.
Asunto(s)
Cifosis , Escoliosis , Fusión Vertebral , Adolescente , Adulto , Elasticidad , Fascia/diagnóstico por imagen , Femenino , Humanos , Músculo Esquelético/diagnóstico por imagen , Estudios Retrospectivos , Escoliosis/diagnóstico por imagen , Escoliosis/cirugía , Vértebras Torácicas/cirugía , Adulto JovenRESUMEN
STUDY DESIGN: This was a prospective randomized controlled trial study. OBJECTIVE: To elucidate clinical and radiographic outcomes and complications of cortical bone trajectory (CBT)-screw fixation in patients with osteoporosis at 24-month follow-up and to compare the results with those after transforaminal lumbar interbody fusion (TLIF) using traditional pedicle screw (PS) fixation. METHODS: We enrolled 124 patients and randomly assigned them to two groups (each group had 62 participants). The primary outcome was fusion rate. Secondary outcomes were VAS, Oswestry Disability Index (ODI), and Japanese Orthopaedic Association (JOA) scores, operation duration, incision length, estimated blood loss, drainage volume, radiological outcomes, and complications. RESULTS: At the 6- and 12-month follow-up points, similar fusion rates were observed based on CT scans in both groups (P=0.583 and 0.583). CBT provided significantly better short-term functional status at 3 months postoperation on ODI and JOA scores (P=0.012 and 0) and similar improvements in pain intensity and functional status at other follow-up points. In addition, CBT resulted in significantly better surgical characteristics. Notably, CBT fixation led to lower incidence of screw loosening (P=0.006). CONCLUSION: CBT-screw fixation for single-level lumbar fusion in patients with osteoporosis provided improvement in clinical symptoms comparable to that of TLIF using PS fixation. Significantly better lumbar stability was found in the CBT group. We suggest that CBT-screw fixation is a reasonable and superior alternative to PS in TLIF in osteoporosis. TRIAL REGISTRATION NUMBER: ChiCTR1900022658. DATE OF REGISTRATION: April 20, 2019.
Asunto(s)
Degeneración del Disco Intervertebral , Osteoporosis , Tornillos Pediculares , Fusión Vertebral , Humanos , Degeneración del Disco Intervertebral/complicaciones , Degeneración del Disco Intervertebral/diagnóstico por imagen , Degeneración del Disco Intervertebral/cirugía , Vértebras Lumbares/diagnóstico por imagen , Vértebras Lumbares/cirugía , Osteoporosis/complicaciones , Osteoporosis/cirugía , Tornillos Pediculares/efectos adversos , Estudios Prospectivos , Fusión Vertebral/efectos adversos , Resultado del TratamientoRESUMEN
STUDY DESIGN: This was a retrospective observational study. OBJECTIVE: We aimed to characterize the feasibility of assessing the accuracy of cortical bone trajectory (CBT) screw placement in midline lumbar interbody fusion using a traditional pedicle screw insertion accuracy evaluation system based on computed tomography (CT). SUMMARY OF BACKGROUND DATA: Since Santoni and colleagues proposed CBT as an alternative approach for the treatment of lumbar degenerative disease, CBT has been biomechanically and clinically investigated in detail. The reported misplacement rate was 0%-12.5%. Therefore, these cortical screws may result in severe complications, such as nerve root, vascular, and spinal cord injuries. However, to the best of our knowledge, the accuracy of the current assessment system of cortical bone screw placement has not been described clearly. MATERIALS AND METHODS: Overall, 342 cortical screws of 69 consecutive patients with lumbar degenerative disease who underwent midline lumbar interbody fusion surgery in one surgeon's initial phase were examined retrospectively. A comprehensive and detailed pedicle screw accuracy classification and grading system was introduced in our study, including 5 types of misplacement: (1) medial and (2) lateral cortical bone perforation (MCP and LCP) of the corresponding pedicle, (3) anterior cortical bone perforation of the vertebral body, (4) endplate perforation, and (5) foraminal perforation (FP). The degree of interobserver and intraobserver agreement with regard to the screw positions based on CT were used as indicators of the reliability of the modified classification system. All patients were retrospectively assessed for screw placement-related complications throughout the entire treatment course to evaluate the relationship between the procedure adequacy and neurological symptoms. RESULTS: The interobserver and intraobserver agreements were substantial-to-almost perfect (κ=0.78 and 0.88, respectively) in distinguishing the acceptable-placed pedicle screws from those with partial or complete cortical perforation. In the MCP and LCP-the most common types of misplacement-the interobserver agreement was substantial (κ=0.70 and 0.76, respectively), and the intraobserver agreement was almost perfect (κ=0.85 and 0.89, respectively). In total, there are 7 (2.05%) MCP and 65 (19.01%) LCP screws. The screw placement-related complication rate is significantly higher in the MCP and FP groups than that in the LCP group. CONCLUSIONS: Our study demonstrated that using a pedicle screw classification and grading system based on CT to assess the accuracy of CBT screw placement is feasible and practical. MCP and FP screws are more likely to cause neurological deficits with statistical significance, especially grade 2 MCP. We recommend inexperienced surgeons choose a lateral trajectory rather than a medial one if they cannot ensure accurate screw insertion. LEVEL OF EVIDENCE: Level III.
Asunto(s)
Tornillos Pediculares , Fusión Vertebral , Hueso Cortical/diagnóstico por imagen , Hueso Cortical/cirugía , Estudios de Factibilidad , Humanos , Vértebras Lumbares/diagnóstico por imagen , Vértebras Lumbares/cirugía , Reproducibilidad de los Resultados , Estudios RetrospectivosRESUMEN
Surface wettability plays an important role in heterogeneous electrocatalysis. Here we report a facile laser ablation strategy to directly modify the wettability of the silver catalyst surface and investigate its effect on oxygen reduction reaction (ORR). A broad range tuning of 2e-/4e- ORR pathways was achieved, with hydrophilic silver surfaces (contact angle (θw) 31.1°± 0.6°) showing high activity and selectivity towards 4e- reduction of oxygen to water.
RESUMEN
Enabling capillary wicking on bulk metal alloys is challenging due to processing complexity at different size scales. This work presents a laser-chemical surface treatment to fabricate superwicking patterns guided by a superhydrophobic region over a large-area metal alloy surface. The laser-chemical surface treatment generates surface micro/nanostructures and desirable surface chemistry simultaneously. The superhydrophobic surface was first fabricated over the whole surface by laser treatment under water confinement and fluorosilane treatment; subsequently, superwicking stripes were processed by a second laser treatment in air and cyanosilane treatment. The resultant surface shows superwicking regions surrounded by superhydrophobic regions. During the process, superwicking regions possess dual-scale structures and polar nitrile surface chemistry. In contrast, random nanoscale structures and fluorocarbon chemistry are generated on the superhydrophobic region of the aluminum alloy 6061 substrates. The resultant superwicking region demonstrates self-propelling anti-gravity liquid transport for methanol and water. The combination of the capillary effect of the dual-scale surface microgrooves and the water affinitive nitrile group contributes toward the self-propelling movement of water and methanol at the superwicking region. The initial phase of wicking followed Washburn dynamics, whereas it entered a non-linear regime in the later phase. The wicking height and rate are regulated by microgroove geometry and spacing.
RESUMEN
Extreme wetting activities of laser-textured metal alloys have received significant interest due to their superior performance in a wide range of commercial applications and fundamental research studies. Fundamentally, extreme wettability of structured metal alloys depends on both the surface structure and surface chemistry. However, compared with the generation of physical topology on the surface, the role of surface chemistry is less explored for the laser texturing processes of metal alloys to tune the wettability. This work introduces a systematic design approach to modify the surface chemistry of laser textured metal alloys to achieve various extreme wettabilities, including superhydrophobicity/superoleophobicity, superhydrophilicity/superoleophilicity, and coexistence of superoleophobicity and superhydrophilicity. Microscale trenches are first created on the aluminum alloy 6061 surfaces by nanosecond pulse laser surface texturing. Subsequently, the textured surface is immersion-treated in several chemical solutions to attach target functional groups on the surface to achieve the final extreme wettability. Anchoring fluorinated groups (-CF2- and -CF3) with very low dispersive and nondispersive surface energy leads to superoleophobicity and superhydrophobicity, resulting in repelling both water and diiodomethane. Attachment of the polar nitrile (-C≡N) group with very high nondispersive and high dispersive surface energy achieves superhydrophilicity and superoleophilicity by drawing water and diiodomethane molecules in the laser-textured capillaries. At last, anchoring fluorinated groups (-CF2- and -CF3) and polar sodium carboxylate (-COONa) together leads to very low dispersive and very high nondispersive surface energy components. It results in the coexistence of superoleophobicity and superhydrophilicity, where the treated surface attracts water but repels diiodomethane.