Psoriatic arthritis of the temporomandibular joint: A systematic review.

OBJECTIVES: Psoriasis is an inflammatory condition brought on by the immune system. This study aimed to perform a systematic review related to psoriatic arthritis (PsA) of the temporomandibular joint (TMJ). METHODS: The search strategy was developed by a radiologist expert with more than 20 years of experience. The search was performed without time restrictions in five electronic databases: PubMed, Web of Science, Embase, Scopus and Ovid. The search strategy was based on MeSH and Emtree terms. The methodological quality of the studies was rated using the quality assessment tools from the National Heart Lung and Blood Institute (NHLBI). RESULTS: Twenty-three publications were included, 10 being case reports. One hundred-fifty-one patients with TMJ PsA were reported. Psoriasis evolution ranged from 1.5 years to 24 years. Clinical symptoms of TMJ involvement included: TMJ pain and sounds, limited range of jaw movements, preauricular swelling, malocclusion, headache, tinnitus, neck stiffness and altered dietary function. TMJ was evaluated by magnetic resonance imaging (six studies), computed tomography (eight articles) and by ultrasonography findings (two articles). For TMJ treatment, topical and systemic medication was reported in 11 studies. Five studies included patients needing surgical procedures for TMJ ankylosis. CONCLUSIONS: A relationship between TMD and psoriasis has been revealed. TMJ PsA has been investigated and debated, although the radiographic findings or clinical symptoms of PsA are not noticeably different from other forms of TMJ arthritis. Conservative therapy can lead to significant improvement of TMJ function.

Developing New Diagnostic Tools Based on SERS Analysis of Filtered Salivary Samples for Oral Cancer Detection.

Cancer still represents one of the biggest challenges in current medical practice. Among different types of cancer, oral cancer has a huge impact on patients due to its great visibility, which is more likely to create social stigma and increased anxiety. New early diagnose methods are still needed to improve treatment efficiency and patients' life quality. Raman/SERS (Surface Enhanced Raman Spectroscopy) spectroscopy has a unique and powerful potential for detecting specific molecules that can become priceless biomarkers in different pathologies, such as oral cancer. In this study, a batch of saliva samples obtained from a group of 17 patients with oro-maxillofacial pathologies compared with saliva samples from 18 healthy donors using the aforementioned methods were evaluated. At the same time, opiorphin, potassium thiocyanate and uric acid were evaluated as potential specific biomarkers for oro-maxillofacial pathologies using multivariate analysis. A careful examination of SERS spectra collected on saliva samples showed that the spectra are dominated by the vibrational bands of opiorphin, potassium thiocyanate and uric acid. Given the fact that all these small molecules are found in very small amounts, we filtrated all the samples to get rid of large molecules and to improve our analysis. By using solid plasmonic substrates, we were able to gain information about molecular concentration and geometry of interaction. On the other hand, the multivariate analysis of the salivary spectra contributed to developing a new detection method for oral cancer.

Salivary Exosomal MicroRNA-486-5p and MicroRNA-10b-5p in Oral and Oropharyngeal Squamous Cell Carcinoma.

Background and Objectives: The research aimed at evaluating the capacity of salivary exosomal miR-10b-5p and miR-486-5p for oral and oropharyngeal cancer detection. Materials and Methods: The saliva samples were harvested from histopathological diagnosed oral and oropharyngeal squamous cell carcinoma patients and healthy volunteer subjects. The exosomes were isolated by differential ultracentrifugation and quantified by Nano Track Analysis. The microRNAs were extracted and quantified from salivary exosomes by quantitative Real-Time Polymerase Chain Reaction. Results: This research comprised fifty participants. When compared to healthy controls, salivary exosomal miR-486-5p was elevated and miR-10b-5p was reduced in oral and oropharyngeal squamous cell carcinoma. Moreover, miR-486-5p had a high expression level in stage II of cancer in comparison to the other cancer stages. The cancer samples presented an increased exosome dimension compared to the control samples. Conclusions: Salivary exosomal miR-10b-5p and miR-486-5p have an altered expression in oral and oropharyngeal cancer.

Incidence of Malocclusion among Young Patients with Gingival Recessions-A Cross-Sectional Observational Pilot Study.

Background and Objectives: Dental occlusion and gingival recession have been studied over the past years especially because of the increasing incidence of occlusal interferences in young patients. The purpose of this pilot study is to investigate any association between occlusal dysfunctions and gingival recessions. Data on gingival phenotype and previous orthodontic treatment were also collected to assess any correlation with the presence of gingival recession. Materials and Methods: Forty systemically healthy subjects, without signs of periodontitis and with gingival recessions, were included in the study. The following parameters were determined: location and extent of the gingival recession, gingival phenotype and functional occlusion by means of observing and registering the occlusal contacts in maximum intercuspation position, protrusive and lateral guidance. Results: Premolars were mostly affected in cases of working-side interferences during lateral guidance (71.19% of the affected teeth during left and 75% during right mandibular movements). The chi-squared exact test applied for the analysis of contingency tables revealed statistically significant associations between excursive interferences during lateral guidance and anterior guidance and the presence of gingival recession on the involved group of teeth. Conclusions: The results suggest that most gingival recessions might be associated with working-side interferences, the highest number of gingival recessions being associated with active interferences during lateral guidance.

Nano-hydroxyapatite use in dentistry: a systematic review.

Nano-hydroxyapatite (nano-HA) is a material with multiple uses due to its biocompatibility and its resemblance to the nonorganic bone structure. It is used in various dental domains such as implantology, surgery, periodontology, esthetics and prevention. The aim of this study is to provide a wide understanding of nano-HA and to promote treatments based on nanomaterials in dentistry. A search in two data bases, Scopus, and PubMED, was conducted over a 5 years period. We chose a 5 years period because this revealed the most recent published studies with the key words 'nano-HA' and 'dentistry'. A number of 32 studies were included in this systematic review. In implantology the main use of nano-HA was as a coating material for titanium implants and its effect was assessed in the matter of osteointegration and inflammatory response as well as antibacterial activity. In tissue engineering the use of nano-HA was directed to surgery and periodontology and this material was assessed mainly as a grafting material. In esthetics and prevention its use was mainly focused on dentinal hypersensitivity treatment, remineralizing potential and as bleaching co-agent. Nano-HA is a relatively novel material with outstanding physical, chemical, mechanical and biological properties that makes it suitable for multiple interventions. It outperformed most of the classic materials used in implantology and surgery but it should be further investigated for bone engineering and caries prevention therapy.

Understanding the basis of medical use of poly-lactide-based resorbable polymers and composites - a review of the clinical and metabolic impact.

This review intended to comparatively explain and present the most important medical use and biological impact of poly-lactides and lactide-based composites. The utilization and degradation of compounds based on lactic acid and polylactides is described in detail. Understanding the metabolism and degradation phenomenon and the factors that potentially influence it is key to modulating their properties as well as their characteristics driven from the fabrication procedures and the fields of use. All these are commented according to the clinician's criteria. The current debate on the advantages and shortcomings of various resorbable polymeric materials categories is also analyzed, from the perspective of the users of resorbable polylactide-based biomaterials. The scientific literature comprises either distinct chemical and physical or specific animal or medical description of resorbable materials; so that in compensation, the present review covers all topics for the most appropriate comprehensive update of the reader.

Early and long-term changes in the muscles of the mandible following orthognathic surgery.

OBJECTIVES: The aim of the present study is to evaluate the early and long-term postoperative dimensional changes of the muscles of the mandible in patients with orthognathic surgery for class II and class III malocclusions by using ultrasonography (US). MATERIAL AND METHODS: Twenty-six patients who underwent bimaxillary orthognathic surgery for class II or class III malocclusions (14 and 12 patients, respectively) were ultrasonographically examined. The length, width, and cross-sectional area of the masseter and suprahyoid muscles were measured at three different time points: T0 (preoperatively), T1 (early postoperatively at 1 month after the surgery), and T2 (late postoperatively at 9 months). A repeated measures ANOVA was used to calculate statistically significant dimensional changes of the mandibular muscles. RESULTS: Statistically significant dimensional changes were found postoperatively in class II malocclusion patients only. The digastric muscle showed higher values for the length and lower values for the width (p < .05) at T1. The geniohyoid muscles were higher in length at T1 and lower in cross-sectional area (CSA) (p < .05) at T2. A decreased measured length and an increased measured width were found in case of the mylohyoid muscle (p < .05) at T2. The early and long-term postoperative dimensional changes of the masseter muscle were not statistically significant. CONCLUSIONS: The mandibular muscles showed a variable adaptive response to the orthognathic surgery. US should be considered for the long-term follow-up of muscular dimensional changes in class II malocclusion patients. CLINICAL RELEVANCE: From a clinical perspective, US is a reliable, non-invasive, and widely available method, which allows monitoring the postoperative muscular changes occurring in class II malocclusion patients.

Estimation of the radiation dose for pediatric CBCT indications: a prospective study on ProMax3D.

BACKGROUND: An increasing number of CBCT units and a wide variability of radiation doses have been reported in dentistry lately. AIM: To estimate the effective, cumulative, and organ absorbed doses in children exposed to CBCT over 2 years. DESIGN: A prospective study was conducted in children who underwent CBCT diagnostic imaging with the ProMax3D machine. Organ and effective doses were calculated by Monte Carlo simulation using 5- and 8-year-old pediatric voxel phantoms. Extrapolation procedures were applied to estimate doses for other ages and CBCT protocols used in clinical conditions. RESULTS: The median effective dose was 137.9 µSv, and the median cumulative dose was 231.4 µSv. Statistically significant differences in the effective doses and cumulative doses were found for various indications of CBCT in children (P < 0.001). The median absorbed organ dose for brain and thyroid was significantly higher for the clinical condition that required large FOVs (2.5 mGy and 1.05 mGy, respectively) compared to medium (0.19 and 0.51 mGy) and small FOVs (0.07 and 0.24 mGy; P < 0.05). The radiation dose of salivary glands did not vary significantly with FOV. CONCLUSION: The results revealed the variation of CBCT doses and the influence of FOV size in pediatric exposure.

Oral splints in the management of nociceptive pain and migraines: A scoping review.

Temporomandibular disorders (TMDs) are characterized by numerous pain manifestations. Their treatment often involves the use of an oral splint. Recent research has found a relationship between migraines, nociceptive pain and TMDs. The aim of the present study was to perform a scoping review of studies in order to evaluate the effectiveness of the various types of oral splint in the treatment of migraine or nociceptive pain. Publications were retrieved from seven databases (PubMed, Web of Science, EMBASE, Scopus, ProQuest, SpringerLink and Ovid). Out of the 15 included publications, three studies were before and after studies, with no control group, whereas the other twelve studies were clinical trials, among which two publications were crossover studies. A clear, single distinction of pain was difficult to describe. Therefore, numerous publications focused on a combination of various types of pains, including myofascial, temporomandibular joint, headaches and migraine-like symptoms, all of which mimicked TMD pain. Overall, six studies used the stabilization splint (SS), three explored the comparison between the SS and the nociceptive trigeminal inhibition splint (NTIS) and two the NTIS. The majority of publications reported a positive outcome of splint therapy. Regarding the type of oral splint usage, the most commonly used one was the SS, followed by the NTIS. The definition and assessment of pain were heterogenous in the identified articles. The findings of the current study showed that occlusal splints may help with pain management, and that effective treatment of TMD-related pain at an early stage can enhance the quality of life of patients.

Artificial intelligence models for clinical usage in dentistry with a focus on dentomaxillofacial CBCT: a systematic review.

This study aimed at performing a systematic review of the literature on the application of artificial intelligence (AI) in dental and maxillofacial cone beam computed tomography (CBCT) and providing comprehensive descriptions of current technical innovations to assist future researchers and dental professionals. The Preferred Reporting Items for Systematic Reviews and Meta-Analyses Protocols (PRISMA) Statement was followed. The study's protocol was prospectively registered. Following databases were searched, based on MeSH and Emtree terms: PubMed/MEDLINE, Embase and Web of Science. The search strategy enrolled 1473 articles. 59 publications were included, which assessed the use of AI on CBCT images in dentistry. According to the PROBAST guidelines for study design, seven papers reported only external validation and 11 reported both model building and validation on an external dataset. 40 studies focused exclusively on model development. The AI models employed mainly used deep learning models (42 studies), while other 17 papers used conventional approaches, such as statistical-shape and active shape models, and traditional machine learning methods, such as thresholding-based methods, support vector machines, k-nearest neighbors, decision trees, and random forests. Supervised or semi-supervised learning was utilized in the majority (96.62%) of studies, and unsupervised learning was used in two (3.38%). 52 publications included studies had a high risk of bias (ROB), two papers had a low ROB, and four papers had an unclear rating. Applications based on AI have the potential to improve oral healthcare quality, promote personalized, predictive, preventative, and participatory dentistry, and expedite dental procedures.

Improving the Mechanical Properties of Orthodontic Occlusal Splints Using Nanoparticles: Silver and Zinc Oxide.

The goal of the current study was to determine the mechanical proprieties of polymethylmethacrylate (PMMA) and the improved compound, the graphene-based PMMA, with Zn and Ag and to compare the results. Scanning electron microscopy analysis of the samples before and after the mechanical test was conducted. The compression behavior, flexural properties, tensile strength, and shape of the samples were all investigated and compared between the variants of PMMA. Commercially available polymethylmethacrylate was used (Orthocryl®-Dentaurum, Ispringen, Germany) with the salt and pepper technique according to the manufacturer's instructions to produce 20 samples for each mechanical trial with standard cylinders (4 mm diameter × 8 mm length) for compression, parallelepipedal prisms for flexing (2 mm × 2 mm × 25 mm) and flat samples for traction. There was no statistical difference in the mechanical proprieties of the samples evaluated, although there were values that could suggest significance. The graphene-based PMMA demonstrated good mechanical proprieties, like the commercially available PMMA, and appears promising for future clinical use based on its multiple advantages.

The Role of an MRI-Based Radiomic Signature in Predicting Malignancy of Parotid Gland Tumors.

The aim of this study was to assess the ability of MRI radiomic features to differentiate between benign parotid gland tumors (BPGT) and malignant parotid gland tumors (MPGT). This retrospective study included 93 patients who underwent MRI examinations of the head and neck region (78 patients presenting unique PGT, while 15 patients presented double PGT). A total of 108 PGT with histological confirmation were eligible for the radiomic analysis and were assigned to a training group (n = 83; 58 BPGT; 25 MPGT) and a testing group (n = 25; 16 BPGT; 9 MPGT). The radiomic features were extracted from 3D segmentations of the PGT on the T2-weighted and fat-saturated, contrast-enhanced T1-weighted images. Following feature reduction techniques, including LASSO regression analysis, a radiomic signature (RS) was built with five radiomic features. The RS presented a good diagnostic performance in differentiating between PGT, achieving an area under the curve (AUC) of 0.852 (p < 0.001) in the training set and 0.786 (p = 0.017) in the testing set. In both datasets, the RS proved to have lower values in the BPGT group as compared to MPGT group (p < 0.001 and p = 0.023, respectively). The multivariate analysis revealed that RS was independently associated with PGT malignancy, together with the ill-defined margin pattern (p = 0.031, p = 0.001, respectively). The complex model, using clinical data, MRI features and the RS, presented a higher diagnostic performance (AUC of 0.976) in comparison to the RS alone. MRI-based radiomic features could be considered potential additional imaging biomarkers able to discriminate between benign and malignant parotid gland tumors.

Influence of Periodontal Status and Prosthetic Treatment on Survival and Success Rates in Implant Therapy: A 5-Year Retrospective Follow-Up Study.

The objective of the present study was to evaluate the 5-year outcome of dental implant therapy and assess the survival, success, and biological and technical complications. A periodontal and prosthetic-oriented evaluation was conducted on the variables that can influence the long-term predictability of implant therapy. A total of 615 patients and 1427 dental implants from a private clinic (MedArtis Dent, Cluj-Napoca, Romania) were enrolled in the study. The study was a longitudinal cohort with data collected retrospectively from physical/digital dental records in combination with a cross-sectional clinical/radiological examination. Results showed that periodontal diagnosis at baseline had a significant impact on the marginal bone loss prediction. Data showed that the cylindrical implant with an internal 45° medium taper connection experienced a higher rate of bone resorption compared to the tapered implant with the 5° internal connection. Screw-retained restorations and overdentures showed a statistical decrease in the marginal bone level height when compared to the cemented restorations. Data from our study suggest that not only is there a powerful association between recall visits and the rate of complications in dental implant treatment, but a lack of professional maintenance predicts a higher bone level loss during the 5-year interval.

Biocompatibility and histological responses of eggshell membrane for dental implant-guided bone regeneration.

Guided bone regeneration (GBR) utilizing eggshell membrane (ESM) as a potential biomaterial for dental implant therapy augmentation was explored in this study. ESM, an environmentally friendly waste product, possesses collagen-rich characteristics. The biocompatibility and histological responses of ESM were investigated in a rat model. Twelve young adult Wistar rats were used in this study. ESM samples were implanted in subcutaneous and intramuscular pockets, and samples were collected at 48 hours, 4 weeks, and 8 weeks post-implantation. Histological analysis revealed the changes in ESM over time. Results showed that ESM maintained its structural integrity, induced a moderate cellular response, and exhibited slow degradation, indicating potential biocompatibility. However, the lack of organized collagen arrangement in ESM led to the formation of irregular and polymorphic spaces, allowing cell migration. Encapsulation of ESM by newly proliferating collagen fibers and multinucleated giant cells was observed at later time points, indicating a foreign body reaction. Crosslinking might improve its performance as a separation membrane, as it has the potential to resist enzymatic degradation and enhance biomechanical properties. In conclusion, ESM demonstrated biocompatibility, slow degradation, and lack of foreign body reaction. While not suitable as a complete separation membrane due to irregular collagen arrangement, further research involving crosslinking could enhance its properties, making it a viable option for guided bone regeneration applications in dental implant therapy. This study highlights the potential of repurposing waste materials for medical purposes and underscores the importance of controlled collagen structure in biomaterial development.

Characterization of eggshell as a bio-regeneration material.

Objective: The objective of this study was to identify and summarize the characteristic features of eggshell for regeneration purpose in oral surgery procedures. Methods: A review of literature was undertaken based on the PubMed database. A search to reveal the current state of knowledge and the current uses of the eggshell as a biomaterial was performed. The characteristics of the materials, the specific use, the procedure and the outcome were extracted from the articles. Results: The materials have been found to be used in humans, animals, and in vitro studies. There is a wide use regarding oral surgery especially in experimental models. There have also been attempts to enhance certain properties and improve the capabilities of eggshell as a biomaterial. There is yet a commercial product to be developed and approved for human use. Conclusions: Eggshell can be an important biowaste which can be of use in guided bone regeneration procedures, but it has not yet entered the commercial phase and approval through official regulation channels.

Botulinum Toxin Injection into the Digastric Muscle: Current Clinical Use and a Report of Five Cases.

The present research aimed to review the clinical applications of botulinum toxin-A (BTX-A) injection into the anterior belly of the digastric muscle (ABDM) and to highlight the potential role of the BTX-A injection into ABDM in preventing postsurgical relapse. Five Class II malocclusion patients who underwent orthognathic surgery received BTX-A injections into both ABDM for the prevention of postoperative relapse. The relapse was evaluated using lateral cephalometric radiographs by comparing the postoperative cephalometric analyses at two different time points, postoperatively at 2 weeks (T1), and long-term, at 9 months after the surgical intervention (T2). The results demonstrated no significant differences between T2 and T1 for the Selle-Nasion-point A (SNA) angle, Selle-Nasion-point B (SNB) angle, point A-Nasion-point B (ANB) angle, mandibular length, and sagittal mandibular position. The patients exhibited stable occlusion without any signs of relapse after the surgery. A single BTX-A injection into the ABDM can effectively prevent postoperative relapse in Class II malocclusion patients, following orthognathic surgery. From a clinical perspective, in case of optimal dosage and procedure, BTX-A injection could be considered as the primary option for the prevention of postsurgical relapse for Class II malocclusion patients.

The Value of Multiparametric Magnetic Resonance Imaging in the Preoperative Differential Diagnosis of Parotid Gland Tumors.

BACKGROUND: The aim of the present study was to determine the value of multiparametric MRI in the preoperative differential diagnosis of parotid tumors, which is essential for therapeutic strategy selection. METHODS: A three-year prospective study was conducted with 65 patients. Each patient was investigated preoperatively with multiparametric MRI and surgical excision of the tumor was performed. The preoperative imaging diagnosis was compared with the histopathological report. Several MRI parameters were analyzed, including T1 and T2 weighted image (WI), apparent diffusion coefficient (ADC), time to peak (TTP), and the time intensity curve (TIC). RESULTS: In the differential diagnosis of benign from malignant tumors, T2WI and ADC showed statistically significant differences. Multiparametric MRI had a sensitivity, specificity, and accuracy of 81.8%, 88.6% and 92.3%, respectively. All of the studied parameters (T1, T2, TIC, TTP, ADC) were significantly different in the comparison between pleomorphic adenomas and Warthin tumors. With reference to the scope of this study, the conjunction of multiparametric and conventional MRI demonstrated a sensitivity, specificity, and accuracy of 94.1%, 100%, and 97.8%, respectively. CONCLUSIONS: Morphological analysis using conventional MRI combined with diffusion-weighted imaging (DW) and dynamic contrast-enhanced (DCE) multiparametric MRI improved the preoperative differential diagnosis of parotid gland tumors.

Benign Pediatric Jawbone Lesions: A 10-Year Clinical and Radiological Pilot Study.

This study aimed at presenting a retrospective longitudinal analysis of the pediatric jaw lesions treated at the Oral and Maxillofacial Surgery Clinic in Cluj-Napoca, Romania, over a timeframe of ten years (2012 to 2022). The clinical and radiological characteristics of the jawbone lesions, the treatment outcome, and the recurrence incidence were described. All consecutive patients aged below 18 years, with histologically diagnosed odontogenic tumors (OTs), nonodontogenic tumors (non-OTs), or odontogenic cysts (OCs) were included. Age, dentition type, clinical symptoms, preoperative and postoperative radiological tests, histological diagnosis, treatment, and follow-up information one year following the diagnoses were all examined. Eighty-two cases were included. The ratio of men to women was 1.15:1, with the mandible predominating by 64.4%. Inflammatory radicular cysts predominated in 31.7% of cases. A total of 42.68% of the patients were asymptomatic. Enucleation was the most frequent surgical technique (45.1%), followed by cystectomies (28%) and marsupialization (14.6%). The overall recurrence rate was 7.3%; the most recurrent histopathological lesion was the odontogenic keratocyst. This study sheds new light on the clinical and radiological characteristics, treatment outcomes, and recurrence rate of juvenile jawbone lesions in children and adolescents. The diagnosis and treatment of jawbone lesions in children and adolescents can be enhanced with the use of epidemiological, clinical, and imagistic information.

The Role of miRNA-221 and miRNA-34a in Non-Melanoma Skin Cancer of the Head and Neck Region.

Non-melanoma skin cancer (NMSC) is one of the most frequent types of malignancy in the human body with an increasing incidence. Short, non-coding RNA molecules called microRNAs (miRNAs) can control post-transcriptional gene expression and they have a significant role in several physiological cellular processes and pathologies, including cancer. Depending on the functions of the genes, miRNAs may function as oncogenes or tumor suppressors. The aim of this paper was to describe the role of miRNA-34a and miRNA-221 in head and neck NMSC. Thirty-eight NMSC match paired (tumor and adjacent) tissue samples were evaluated by qRT-PCR. Total RNA was extracted and isolated from tissue samples using the phenol-chloroform (Trireagent) method according to the manufacturer's protocol. The concentration of RNA was measured by a NanoDrop-1000 spectrophotometer. The expression level of each miRNA was calculated by threshold cycle. For all statistical tests, the 0.05 significance level was used and two-tailed p values. All analyses were conducted in an R environment for statistical computing and graphics. We found the miRNA-221 being overexpressed in squamous cell carcinoma (SCC) (p < 0.05), basal cell carcinoma (BCC) and basosquamous cell carcinoma (BSC) compared with adjacent normal tissue. Additionally, the levels of miRNA-221 were two times higher (p < 0.05) in cases where the excision of the tumor was done with positive margins (R1), which means that we are the first to highlight the potential role of miRNA-221 in the microscopical local invasion. Mi-RNA-34a expression was altered in the malignant tissue compared with the adjacent normal one both in BCC and SCC but not statistically significantly. In conclusion, NMSC are challenging because of their increasing incidence and rapidly evolving development and discovering their molecular mechanisms of action lead us to understand tumorigenesis and evolution, while also contributing to the implementation of novel therapeutic keys.

Statistical Comparison of the Mechanical Properties of 3D-Printed Resin through Triple-Jetting Technology and Conventional PMMA in Orthodontic Occlusal Splint Manufacturing.

Dental 3D-printing technologies, including stereolithography (SLA), polyjet (triple-jetting technology), and fusion deposition modeling, have revolutionized the field of orthodontic occlusal splint manufacturing. Three-dimensional printing is now currently used in many dental fields, such as restorative dentistry, prosthodontics, implantology, and orthodontics. This study aimed to assess the mechanical properties of 3D-printed materials and compare them with the conventional polymethylmethacrylate (PMMA). Compression, flexural, and tensile properties were evaluated and compared between PMMA samples (n = 20) created using the "salt and pepper" technique and digitally designed 3D-printed samples (n = 20). The samples were subjected to scanning electron microscope analysis. Statistical analysis revealed that the control material (PMMA) exhibited a significantly higher Young's modulus of compression and tensile strength (p < 0.05). In the flexural tests, the control samples demonstrated superior load at break results (p < 0.05). However, the 3D-printed samples exhibited significantly higher maximum bending stress at maximum load (MPa) (p < 0.05). Young's modulus of tensile testing (MPa) was statistically significant higher for the control samples, while the 3D-printed samples demonstrated significantly higher values for elongation at break (p < 0.05). These findings indicate that 3D-printed materials are a promising alternative that can be effectively utilized in clinical practice, potentially replacing traditional heat-cured resin in various applications.