Full dynamic range proteome analysis of S. cerevisiae by targeted proteomics.

The rise of systems biology implied a growing demand for highly sensitive techniques for the fast and consistent detection and quantification of target sets of proteins across multiple samples. This is only partly achieved by classical mass spectrometry or affinity-based methods. We applied a targeted proteomics approach based on selected reaction monitoring (SRM) to detect and quantify proteins expressed to a concentration below 50 copies/cell in total S. cerevisiae digests. The detection range can be extended to single-digit copies/cell and to proteins undetected by classical methods. We illustrate the power of the technique by the consistent and fast measurement of a network of proteins spanning the entire abundance range over a growth time course of S. cerevisiae transiting through a series of metabolic phases. We therefore demonstrate the potential of SRM-based proteomics to provide assays for the measurement of any set of proteins of interest in yeast at high-throughput and quantitative accuracy.

Targeted Proteomics to Assess the Response to Anti-Angiogenic Treatment in Human Glioblastoma (GBM).

Glioblastoma (GBM) is a highly aggressive primary brain tumor with dismal outcome for affected patients. Because of the significant neo-angiogenesis exhibited by GBMs, anti-angiogenic therapies have been intensively evaluated during the past years. Recent clinical studies were however disappointing, although a subpopulation of patients may benefit from such treatment. We have previously shown that anti-angiogenic targeting in GBM increases hypoxia and leads to a metabolic adaptation toward glycolysis, suggesting that combination treatments also targeting the glycolytic phenotype may be effective in GBM patients. The aim of this study was to identify marker proteins that are altered by treatment and may serve as a short term readout of anti-angiogenic therapy. Ultimately such proteins could be tested as markers of efficacy able to identify patient subpopulations responsive to the treatment. We applied a proteomics approach based on selected reaction monitoring (SRM) to precisely quantify targeted protein candidates, selected from pathways related to metabolism, apoptosis and angiogenesis. The workflow was developed in the context of patient-derived intracranial GBM xenografts developed in rodents and ensured the specific identification of human tumor versus rodent stroma-derived proteins. Quality control experiments were applied to assess sample heterogeneity and reproducibility of SRM assays at different levels. The data demonstrate that tumor specific proteins can be precisely quantified within complex biological samples, reliably identifying small concentration differences induced by the treatment. In line with previous work, we identified decreased levels of TCA cycle enzymes, including isocitrate dehydrogenase, whereas malectin, calnexin, and lactate dehydrogenase A were augmented after treatment. We propose the most responsive proteins of our subset as potential novel biomarkers to assess treatment response after anti-angiogenic therapy that warrant future analysis in clinical GBM samples.

Large-Scale SRM Screen of Urothelial Bladder Cancer Candidate Biomarkers in Urine.

Urothelial bladder cancer is a condition associated with high recurrence and substantial morbidity and mortality. Noninvasive urinary tests that would detect bladder cancer and tumor recurrence are required to significantly improve patient care. Over the past decade, numerous bladder cancer candidate biomarkers have been identified in the context of extensive proteomics or transcriptomics studies. To translate these findings in clinically useful biomarkers, the systematic evaluation of these candidates remains the bottleneck. Such evaluation involves large-scale quantitative LC-SRM (liquid chromatography-selected reaction monitoring) measurements, targeting hundreds of signature peptides by monitoring thousands of transitions in a single analysis. The design of highly multiplexed SRM analyses is driven by several factors: throughput, robustness, selectivity and sensitivity. Because of the complexity of the samples to be analyzed, some measurements (transitions) can be interfered by coeluting isobaric species resulting in biased or inconsistent estimated peptide/protein levels. Thus the assessment of the quality of SRM data is critical to allow flagging these inconsistent data. We describe an efficient and robust method to process large SRM data sets, including the processing of the raw data, the detection of low-quality measurements, the normalization of the signals for each protein, and the estimation of protein levels. Using this methodology, a variety of proteins previously associated with bladder cancer have been assessed through the analysis of urine samples from a large cohort of cancer patients and corresponding controls in an effort to establish a priority list of most promising candidates to guide subsequent clinical validation studies.

Large-Scale Targeted Proteomics Using Internal Standard Triggered-Parallel Reaction Monitoring (IS-PRM).

Targeted high-resolution and accurate mass analyses performed on fast sequencing mass spectrometers have opened new avenues for quantitative proteomics. More specifically, parallel reaction monitoring (PRM) implemented on quadrupole-orbitrap instruments exhibits exquisite selectivity to discriminate interferences from analytes. Furthermore, the instrument trapping capability enhances the sensitivity of the measurements. The PRM technique, applied to the analysis of limited peptide sets (typically 50 peptides or less) in a complex matrix, resulted in an improved detection and quantification performance as compared with the reference method of selected reaction monitoring performed on triple quadrupole instruments. However, the implementation of PRM for the analysis of large peptide numbers requires the adjustment of mass spectrometry acquisition parameters, which affects dramatically the quality of the generated data, and thus the overall output of an experiment. A newly designed data acquisition scheme enabled the analysis of moderate-to-large peptide numbers while retaining a high performance level. This new method, called internal standard triggered-parallel reaction monitoring (IS-PRM), relies on added internal standards and the on-the-fly adjustment of acquisition parameters to drive in real-time measurement of endogenous peptides. The acquisition time management was designed to maximize the effective time devoted to measure the analytes in a time-scheduled targeted experiment. The data acquisition scheme alternates between two PRM modes: a fast low-resolution "watch mode" and a "quantitative mode" using optimized parameters ensuring data quality. The IS-PRM method exhibited a highly effective use of the instrument time. Applied to the analysis of large peptide sets (up to 600) in complex samples, the method showed an unprecedented combination of scale and analytical performance, with limits of quantification in the low amol range. The successful analysis of various types of biological samples augurs a broad applicability of the method, which is likely to benefit a wide range of proteomics experiments.

Parallel reaction monitoring using quadrupole-Orbitrap mass spectrometer: Principle and applications.

Targeted mass spectrometry-based approaches are nowadays widely used for quantitative proteomics studies and more recently have been implemented on high resolution/accurate mass (HRAM) instruments resulting in a considerable performance improvement. More specifically, the parallel reaction monitoring technique (PRM) performed on quadrupole-Orbitrap mass spectrometers, leveraging the high resolution and trapping capabilities of the instrument, offers a clear advantage over the conventional selected reaction monitoring (SRM) measurements executed on triple quadrupole instruments. Analyses performed in HRAM mode allow for an improved discrimination between signals derived from analytes and those resulting from matrix interferences translating in the reliable quantification of low abundance components. The purpose of the study defines various implementation schemes of PRM, namely: (i) exploratory experiments assessing the detectability of very large sets of peptides (100-1000), (ii) wide-screen analyses using (crude) internal standards to obtain statistically meaningful (relative) quantitative analyses, and (iii) precise/accurate quantification of a limited number of analytes using calibrated internal standards. Each of the three implementation schemes requires specific acquisition methods with defined parameters to appropriately control the acquisition during the actual peptide elution. This tutorial describes the different PRM approaches and discusses their benefits and limitations in terms of quantification performance and confidence in analyte identification.

The use of proteases complementary to trypsin to probe isoforms and modifications.

The wide diversity of proteins expressed in a cell or a tissue as a result of gene variants, RNA editing or PTMs results in several hundred thousand distinct functional proteins called proteoforms. The large-scale analysis of proteomes has been driven by bottom-up MS approaches. This allowed to identify and quantify large numbers of gene products and perform PTM profiling which yielded a significant number of biological discoveries. Trypsin is the gold standard enzyme for the production of peptides in bottom-up approaches. Several investigators argued recently that the near exclusive use of trypsin provided only a partial view of the proteome and hampered the discovery of new isoforms. The use of multiple proteases in a complementary fashion can increase sequence coverage providing more extensive PTM and sequence variant profiling. Here the various approaches to characterize proteoforms are discussed, including the use of alternative enzymes to trypsin in shotgun approaches to expand the observable sequence space by LC-MS/MS. The technical considerations associated with the use of alternative enzymes are discussed.

Longitudinal Urinary Protein Variability in Participants of the Space Flight Simulation Program.

Urine is a valuable material for the diagnosis of renal pathologies and to investigate the effects of their treatment. However, the variability in protein abundance in the context of normal homeostasis remains a major challenge in urinary proteomics. In this study, the analysis of urine samples collected from healthy individuals, rigorously selected to take part in the MARS-500 spaceflight simulation program, provided a unique opportunity to estimate normal concentration ranges for an extended set of urinary proteins. In order to systematically identify and reliably quantify peptides/proteins across a large sample cohort, a targeted mass spectrometry method was developed. The performance of parallel reaction monitoring (PRM) analyses was improved by implementing tight control of the monitoring windows during LC-MS/MS runs, using an on-the-fly correction routine. Matching the experimentally obtained MS/MS spectra with reference fragmentation patterns allowed dependable peptide identifications to be made. Following optimization and evaluation, the targeted method was applied to investigate protein abundance variability in 56 urine samples, collected from six volunteers participating in the MARS-500 program. The intrapersonal protein concentration ranges were determined for each individual and showed unexpectedly high abundance variation, with an average difference of 1 order of magnitude.

Structural characterization and biological implications of sulfated N-glycans in a serine protease from the neotropical moth Hylesia metabus (Cramer [1775]) (Lepidoptera: Saturniidae).

Contact with the urticating setae from the abdomen of adult females of the neo-tropical moth Hylesia metabus gives rise to an urticating dermatitis, characterized by intense pruritus, generalized malaise and occasionally ocular lesions (lepidopterism). The setae contain a pro-inflammatory glycosylated protease homologous to other S1A serine proteases of insects. Deglycosylation with PNGase F in the presence of a buffer prepared with 40% H2 (18)O allowed the assignment of an N-glycosylation site. Five main paucimannosidic N-glycans were identified, three of which were exclusively α(1-6)-fucosylated at the proximal GlcNAc. A considerable portion of these N-glycans are anionic species sulfated on either the 4- or the 6-position of the α(1-6)-mannose residue of the core. The application of chemically and enzymatically modified variants of the toxin in an animal model in guinea pigs showed that the pro-inflammatory and immunological reactions, e.g. disseminated fibrin deposition and activation of neutrophils, are due to the presence of sulfate-linked groups and not on disulfide bonds, as demonstrated by the reduction and S-alkylation of the toxin. On the other hand, the hemorrhagic vascular lesions observed are attributed to the proteolytic activity of the toxin. Thus, N-glycan sulfation may constitute a defense mechanism against predators.

Detection and quantification of proteins in clinical samples using high resolution mass spectrometry.

Quantitative proteomics has benefited from the recent development of mass spectrometers capable of high-resolution and accurate-mass (HR/AM) measurements. While targeted experiments are routinely performed on triple quadrupole instruments in selected reaction monitoring (SRM; often referred as multiple reaction monitoring, MRM) mode, the quadrupole-orbitrap mass spectrometers allow quantification in MS/MS mode, also known as parallel reaction monitoring (PRM). This technique is characterized by higher selectivity and better confidence in the assignment of the precursor and fragment ions, and thus translates into an improved analytical performance. More fundamentally, PRM introduces a change of the overall paradigm of targeted experiments, by the decoupling of the acquisition and data processing. They rely on two distinct steps, with a simplified acquisition method in conjunction with a flexible, iterative, post-acquisition data processing. This account describes in detail the different steps of a PRM experiment, which include the design of the acquisition method, the confirmation of the identity of the analytes founded upon a full MS/MS fragmentation pattern, and the quantification based on the extraction of specific fragment ions (selected post-acquisition) using tight mass tolerance. The different types of PRM experiments, defined as large-scale screening or precise targeted quantification using calibrated internal standards, together with the considerations on the selection of experimental parameters are discussed.

Targeted peptide measurements in biology and medicine: best practices for mass spectrometry-based assay development using a fit-for-purpose approach.

Adoption of targeted mass spectrometry (MS) approaches such as multiple reaction monitoring (MRM) to study biological and biomedical questions is well underway in the proteomics community. Successful application depends on the ability to generate reliable assays that uniquely and confidently identify target peptides in a sample. Unfortunately, there is a wide range of criteria being applied to say that an assay has been successfully developed. There is no consensus on what criteria are acceptable and little understanding of the impact of variable criteria on the quality of the results generated. Publications describing targeted MS assays for peptides frequently do not contain sufficient information for readers to establish confidence that the tests work as intended or to be able to apply the tests described in their own labs. Guidance must be developed so that targeted MS assays with established performance can be made widely distributed and applied by many labs worldwide. To begin to address the problems and their solutions, a workshop was held at the National Institutes of Health with representatives from the multiple communities developing and employing targeted MS assays. Participants discussed the analytical goals of their experiments and the experimental evidence needed to establish that the assays they develop work as intended and are achieving the required levels of performance. Using this "fit-for-purpose" approach, the group defined three tiers of assays distinguished by their performance and extent of analytical characterization. Computational and statistical tools useful for the analysis of targeted MS results were described. Participants also detailed the information that authors need to provide in their manuscripts to enable reviewers and readers to clearly understand what procedures were performed and to evaluate the reliability of the peptide or protein quantification measurements reported. This paper presents a summary of the meeting and recommendations.

Advances in high-resolution accurate mass spectrometry application to targeted proteomics.

Targeted quantitative proteomic analyses aim at systematically measuring the abundance of proteins in large sets of samples, without biases or missing values. One typical implementation is the verification of biomarker candidates in bodily fluids, which measures extended lists of validated transitions using triple quadrupole instruments in selected reaction monitoring (SRM) mode. However, the selectivity of this mass spectrometer is limited by the resolving power of its mass analyzers, and interferences may require the reanalysis of the samples. Despite the efforts undertaken in the development of software, and resources to design SRM studies, and to analyze and validate the data, the process remains tedious and time consuming. The development of fast scanning high-resolution and accurate mass (HRAM) spectrometers, such as the quadrupole TOF and the quadrupole orbitrap instruments, offers alternatives for targeted analyses. The selectivity of HRAM measurements in complex samples is greatly improved by effectively separating co-eluting interferences. The fragment ion chromatograms are extracted from the high-resolution MS/MS data using a narrow mass tolerance. The entire process is straightforward as the selection of fragment ions is performed postacquisition. This account describes the different HRAM techniques and discusses their advantages and limitations in the context of targeted proteomic analyses.

Quantification of SAA1 and SAA2 in lung cancer plasma using the isotype-specific PRM assays.

The quantification of plasma proteins using the high resolution and accurate mass (HR/AM)-based parallel reaction monitoring (PRM) method provides an immediate benefit over the conventional SRM-based method in terms of selectivity. In this study, multiplexed PRM assays were developed to analyze isotypes of serum amyloid A (SAA) proteins in human plasma with a focus on SAA1 and SAA2. Elevated plasma levels of these proteins in patients diagnosed with lung cancer have been reported in previous studies. Since SAA1 and SAA2 are highly homologous, the available immunoassays tend to overestimate their concentrations due to cross-reactivity. On the other hand, when mass spectrometry (MS)-based assays are used, the presence of the several allelic variants may result in a problem of underestimation. In the present study, eight peptides that represent the target proteins at three different levels: isotype-specific (SAA1α,  SAA 1ß,  SAA1γ,  SAA2α,  SAA2ß), protein-specific (SAA1 or SAA2), and pan SAA (SAA1 and SAA2) were chosen to differentiate SAAs in lung cancer plasma samples using a panel of PRM assays. The measurement of specific isotypes, leveraging the analytical performance of PRM, allowed to quantify the allelic variants of both target proteins. The isotypes detected were corroborated with the genetic information obtained from the same samples. The combination of SAA2α and SAA2ß assays representing the total SAA2 concentration demonstrated a superior analytical outcome than the previously used assay on the common peptide when applied to the detection of lung cancer.

Protein quantification using a cleavable reporter peptide.

Peptide and protein quantification based on isotope dilution and mass spectrometry analysis are widely employed for the measurement of biomarkers and in system biology applications. The accuracy and reliability of such quantitative assays depend on the quality of the stable-isotope labeled standards. Although the quantification using stable-isotope labeled peptides is precise, the accuracy of the results can be severely biased by the purity of the internal standards, their stability and formulation, and the determination of their concentration. Here we describe a rapid and cost-efficient method to recalibrate stable isotope labeled peptides in a single LC-MS analysis. The method is based on the equimolar release of a protein reference peptide (used as surrogate for the protein of interest) and a universal reporter peptide during the trypsinization of a concatenated polypeptide standard. The quality and accuracy of data generated with such concatenated polypeptide standards are highlighted by the quantification of two clinically important proteins in urine samples and compared with results obtained with conventional stable isotope labeled reference peptides. Furthermore, the application of the UCRP standards in complex samples is described.

Verification of the biomarker candidates for non-small-cell lung cancer using a targeted proteomics approach.

Lung cancer, with its high metastatic potential and high mortality rate, is the worldwide leading cause of cancer-related deaths. High-throughput "omics"-based platforms have accelerated the discovery of biomarkers for lung cancer, and the resulting candidates are to be evaluated for their diagnostic potential as noninvasive biomarkers. The evaluation of the biomarker candidates involves the quantitative measurement of large numbers of proteins in bodily fluids using advanced mass spectrometric techniques. In this study, a robust pipeline based on targeted proteomics was developed for biomarker verification in plasma samples and applied to verifying lung cancer biomarker candidates. Highly multiplexed liquid chromatrography-selected reaction monitoring (LC-SRM) assays for 95 potential tumor markers for non-small-cell lung cancer (NSCLC) were generated to screen plasma samples obtained from 72, early to late stage, patients. A total of 17 proteins were verified as potent tumor markers detectable in plasma and, where available, verified by enzyme-linked immunosorbent assays (ELISAs). A novel plasma-based biomarker, zyxin, fulfilled the criteria for a potential early diagnostic marker for NSCLC.

Advances in high-resolution quantitative proteomics: implications for clinical applications.

The advances in high-resolution mass spectrometry instrumentation, capable of accurate mass measurement and fast acquisition, have enabled new approaches for targeted quantitative proteomics. More specifically, analyses performed on quadrupole-orbitrap mass spectrometers operated in parallel reaction monitoring (PRM) mode leverage the intrinsic high resolving power and trapping capabilities. The PRM technique offers unmatched degrees of selectivity and analytical sensitivity, typically required to analyze peptides in complex samples, such as those encountered in biomedical research or clinical studies. The features of PRM have provoked a paradigm change in targeted experiments, by decoupling acquisition and data processing. It has resulted in a new analytical workflow comprising distinct methods for each step, thus enabling much larger flexibility. The PRM technique was further enhanced by a new data acquisition scheme, allowing dynamic parameter settings. The potential of the technique may radically impact future quantitative proteomics studies.

Improvement of the performance of targeted LC-MS assays through enrichment of histidine-containing peptides.

Mass spectrometric-based quantification using targeted methods has matured during the past decade and is now commonly used in proteomics. However, the reliability of protein quantification in complex matrixes using selected reaction monitoring is often impaired by interfering signals arising from coelution of nontargeted components. Sample preparation methods resulting in the reduction of the number of peptides present in the mixture minimizes this effect. One solution consists in the selective capture of peptides containing infrequent amino acids. The enrichment of histidine-containing peptides via immobilized metal-ion affinity chromatography loaded with Cu(2+) ions (IMAC-Cu) was applied in a quantitative workflow and found to be a simple and cost effective method for the reduction of sample complexity with high recovery and selectivity. When applied to a series of depleted human plasma digests, the method decreased nonspecific signals, resulting in a more precise and robust protein quantification. The method was also shown to be an alternative to HSA/IgG depletion during plasma protein analysis. This method, used in conjunction with recent improvements in the instrument's peak capacity, addresses a bottleneck generally encountered in quantitative proteomics studies by providing the robustness and throughput required for the analysis of large sample series without compromising the number of proteins monitored.

A simple protocol to routinely assess the uniformity of proteomics analyses.

Mass-spectrometry-based proteomic approaches are increasingly applied to biological and clinical studies. Initially used by specialized laboratories, the technology has matured and gained acceptance by the community, using various analytical processes and platforms. To facilitate data comparison and integration across laboratories, there is a need to harmonize analytical processes to ensure the generation of reliable proteomic data sets. This is especially critical in the context of large initiatives, such as the Human Proteome Project promoted by the Human Proteome Organization (HUPO). Quality control is a first step toward the harmonization of proteomics data sets. We have developed a procedure to routinely assess the uniformity of proteomics analyses. It relies on a simple protocol based on three proteins and two sets of isotopically labeled peptides, one being added prior to tryptic digestion and the second one prior to liquid chromatography-mass spectrometry (LC-MS) analysis. The proposed method evaluates in a single step both the sample preparation, by measuring the relative amounts of endogenous peptides and their isotopically labeled counterparts, and the LC-MS platform performance, by monitoring the main LC-MS attributes for reference peptides. The procedure is simple and easy to implement into routine workflows typically employed by the proteomics community.

Targeted proteomic quantification on quadrupole-orbitrap mass spectrometer.

There is an immediate need for improved methods to systematically and precisely quantify large sets of peptides in complex biological samples. To date protein quantification in biological samples has been routinely performed on triple quadrupole instruments operated in selected reaction monitoring mode (SRM), and two major challenges remain. Firstly, the number of peptides to be included in one survey experiment needs to be increased to routinely reach several hundreds, and secondly, the degree of selectivity should be improved so as to reliably discriminate the targeted analytes from background interferences. High resolution and accurate mass (HR/AM) analysis on the recently developed Q-Exactive mass spectrometer can potentially address these issues. This instrument presents a unique configuration: it is constituted of an orbitrap mass analyzer equipped with a quadrupole mass filter as the front-end for precursor ion mass selection. This configuration enables new quantitative methods based on HR/AM measurements, including targeted analysis in MS mode (single ion monitoring) and in MS/MS mode (parallel reaction monitoring). The ability of the quadrupole to select a restricted m/z range allows one to overcome the dynamic range limitations associated with trapping devices, and the MS/MS mode provides an additional stage of selectivity. When applied to targeted protein quantification in urine samples and benchmarked with the reference SRM technique, the quadrupole-orbitrap instrument exhibits similar or better performance in terms of selectivity, dynamic range, and sensitivity. This high performance is further enhanced by leveraging the multiplexing capability of the instrument to design novel acquisition methods and apply them to large targeted proteomic studies for the first time, as demonstrated on 770 tryptic yeast peptides analyzed in one 60-min experiment. The increased quality of quadrupole-orbitrap data has the potential to improve existing protein quantification methods in complex samples and address the pressing demand of systems biology or biomarker evaluation studies.

High-throughput generation of selected reaction-monitoring assays for proteins and proteomes.

Selected reaction monitoring (SRM) uses sensitive and specific mass spectrometric assays to measure target analytes across multiple samples, but it has not been broadly applied in proteomics owing to the tedious assay development process for each protein. We describe a method based on crude synthetic peptide libraries for the high-throughput development of SRM assays. We illustrate the power of the approach by generating and applying validated SRM assays for all Saccharomyces cerevisiae kinases and phosphatases.