Asymmetric by Design: Heteroleptic Coordination Compounds with Redox-Active Dithiolene and 1,2,4,5-Tetrakis(isopropylthio)benzene Ligands.

The 1,2,4,5-tetrakis(alkylthio)benzenes are redox-active organosulfur molecules that support oxidation to a stable radical cation. Their utility as ligands for the assembly of multimetal complexes with tailored functionality/property is unexamined. Here, 1,2,4,5-tetrakis(isopropylthio)benzene (tptbz, 1) is shown to bind PdCl2 at either one end, leaving the other open, or at both ends to form centrosymmetric [Cl2Pd(tptbz)PdCl2], 4. Ligand metathesis between Na2[(N≡C)2C2S2] (Na2mnt) and [Cl2M(tptbz)] (M = Pd, 2; M = Pt, 3) yields [(mnt)M(tptbz)] (M = Pd, 5; M = Pt, 6), but an alternative route involving transmetalation with [(mnt)SnMe2] delivers substantially greater yield. The mixed dithiolene-dithioether compound [(Ph2C2S2)Pt(tptbz)] (8) is formed by a similar transmetalation protocol using [(Ph2C2S2)SnnBu2]. Compounds 5, 6, and 8 are the first such heteroleptic complexes prepared by deliberate synthesis. The cyclic voltammetry of 8 reveals anodic waves at +0.14 and +0.97 V vs Fc+/Fc, which are attributed to successive dithiolene oxidation processes. While oxidized at +0.73 V as a free ligand, the redox-active MO of tptbz is pushed to a higher potential upon coordination to Pt2+ and is inaccessible. Calculations of the structures of [8]+ and of [((Cl2-3,5-C6H3)2C2S2)Pt(tptbz)]+ show that, in the latter, the dithiolene MOs are drawn down in energy into proximity with the tptbz MOs.

Fully Reduced and Mixed-Valent Multi-Copper Aggregates Supported by Tetradentate Diamino Bis(thiolate) Ligands.

Tetradentate diamino bis(thiolate) ligands (l-N2S2(2-)) with saturated linkages between heteroatoms support fully reduced [(Cu(l-N2S2))2Cu2] complexes that bear relevance as an entry point toward molecules featuring the Cu2ICu2II(µ4-S) core composition of nitrous oxide reductase (N2OR). Tetracopper [(Cu(l-N2(SMe2)2))2Cu2] (l-N2(SMe2H)2 = N1,N2-bis(2-methyl-2-mercaptopropane)-N1,N2-dimethylethane-1,2-diamine) does not support clean S atom oxidative addition but undergoes Cl atom transfer from PhICl2 or Ph3CCl to afford [(Cu(l-N2(SMe2)2))3(CuCl)5], 14. When introduced to Cu(I) sources, the l-N2(SArH)2 ligand (l-N2(SArH)2 = N1,N2-bis(2-mercaptophenyl)-N1,N2-dimethylethane-1,2-diamine), made by a newly devised route from N1,N2-bis(2-fluorophenyl)-N1,N2-dimethylethane-1,2-diamine, ultimately yields the mixed-valent pentacopper [(Cu(l-N2SAr2))3Cu2] (19), which has 3-fold rotational symmetry (D3) around a Cu2 axis. The single CuII ion of 19 is ensconced within an equatorial l-N2(SAr)2(2-) ligand, as shown by 14N coupling in its EPR spectrum. Formation of 19 proceeds from an initial, fully reduced product, [(Cu(l-N2SAr2))3Cu2(Cu(MeCN))] (17), which is C2 symmetric and exceedingly air-sensitive. While unreactive toward chalcogen donors, 19 supports reversible reduction to the all-cuprous state; generation of [19]1- and treatment with S atom donors only return 19 because structural adjustments necessary for oxidative addition are noncompetitive with outer-sphere electron transfer. Oxidation of 19 is marked by intense darkening, consistent with greater mixed valency, and by dimerization in the crystalline state to a decacopper species ([20]2+) of S4 symmetry.

Heterotrimetallic Assemblies with 1,2,4,5-Tetrakis(diphenylphosphino)benzene Bridges: Constructs for Controlling the Separation and Spatial Orientation of Redox-Active Metallodithiolene Groups.

Metallodithiolene complexes of the type [(R2C2S2)M(η2-tpbz)] [R = CN, Ph, or p-anisyl; M = Ni2+, Pd2+, or Pt2+; tpbz = 1,2,4,5-tetrakis(diphenylphosphino)benzene] chelate transition metals ions to form trimetallic arrays [[(R2C2S2)M(tpbz)]2M']n+, where M' is square planar Pt2+, tetrahedral Cu+, Ag+, or Au+, or octahedral {ReBr(CO)}/{Re(CO)2}+. Forcing conditions (190 °C reflux in decalin, 72 h) are demanded for the Re+ compounds. With third-row metals at the nexus, the compounds are stable to air. Twelve members of the set have been characterized by X-ray diffraction and reveal dithiolene centroid-centroid distances ranging from 22.4 to 24.0 Å. Folding around each tpbz intrachelate P···P axis such that the MP2/M'P2 planes meet the tpbz P2C6P2 mean plane at non-zero values gives rise to core topologies that appear "S-like" or herringbone-like for M' = Pt2+ or {ReBr(CO)}/{Re(CO)2}+. Calculations reveal that departure from idealized D2h/D2d/C2v symmetries is induced by steric crowding between Ph groups and that dynamic, fluxional behavior is pertinent to the solution phase because multiple, lower-symmetry minima of comparable energy exist. Spectroscopically, the formation of the trimetallic arrays is marked by a shift of the open end 31P nuclear magnetic resonance signal from approximately -14.5 ppm to approximately +41, approximately +20.5, and approximately +28.5 ppm for M' = Pt2+, Au+, and {ReBr(CO)}/{Re(CO)2}+, respectively. Electrochemically, dithiolene-based oxidations are observed for the R = Ph and M' = Pt2+ or Au+ compounds but at potentials that are anodically shifted relative to charge-neutral [[(R2C2S2)M]2(µ-tpbz)]. The compounds reported clarify the possibilities for the synthesis of assemblies in which weakly coupled spins may be created in their modular (R2C2S2)M and M' parts.

Open-Ended Metallodithiolene Complexes with the 1,2,4,5-Tetrakis(diphenylphosphino)benzene Ligand: Modular Building Elements for the Synthesis of Multimetal Complexes.

Open-ended, singly metalated dithiolene complexes with 1,2,4,5-tetrakis(diphenylphosphino)benzene (tpbz) are prepared either by ligand transfer to [Cl2M(tpbz)] from (R2C2S2)SnR'2 (R = CN, R' = Me; R = Me, R' = nBu) or by a direct reaction between tpbz and [M(S2C2R2)2] (M = Ni, Pd, Pt; R = Ph, p-anisyl) in a 1:1 ratio. The formation of dimetallic [(R2C2S2)M(tpbz)M(S2C2R2)] attends these syntheses in modest amounts, but the open-ended compounds are readily separated by silica chromatography. As affirmed by X-ray crystallographic characterization of numerous members of the set, the [(R2C2S2)M(tpbz)] compounds show dithiolene ligands in their fully reduced ene-1,2-dithiolate form conjoined with divalent Group 10 ions. Minor amounts of octahedral [(Ph2C2S2)2PtIV(tpbz)], a presumed intermediate, are isolated from the preparation of [(Ph2C2S2)PtII(tpbz)]. Heterodimetallic [(Ph2C2S2)Pt(tpbz)Ni(S2C2Me2)] is prepared from [(Ph2C2S2)PtII(tpbz)]; its cyclic voltammogram, upon anodic scanning, shows two pairs of closely spaced, but resolved, 1e- oxidations corresponding first to [R2C2S22-] - 1e- → [R2C2S•S-] and then to [R2C2S•S-] - 1e- → [R2(C═S)2]. The open diphosphine of [(R2C2S2)M(tpbz)] can be oxidized to afford open-ended [(R2C2S2)M(tpbzE2)] (E = O, S). Synthesis of the octahedral [(dppbO2)3Ni][I3]2 [dppbO2 = 1,2-bis(diphenylphosphoryl)benzene] suggests that the steric profile of [(R2C2S2)M(tpbzE2)] is moderated enough that three could be accommodated as ligands around a metal ion.

Synthesis and Structures of Polyphenylphenanthrenes.

1,2,3,4,5,6,7,8-Octaphenylphenanthrene (4) and decaphenylphenanthrene (5) were prepared by very short syntheses (two or three steps) from tetraphenylfuran and polybrominated benzene derivatives. The X-ray structures of compounds 4 and 5 show them to be quite crowded, with the phenanthrene cores twisted by about 40° due to the clash of the C4 and C5 phenyl groups. Compound 4 was resolved by chromatography on a chiral support, and its free energy of activation for racemization was determined to be 24.6 kcal mol-1 at 40 °C. Computational studies indicate that compound 5 has a racemization barrier approximately 6 kcal mol-1 lower than 4, and thus 5 would not be configurationally stable at room temperature.

Photocatalytic H2-Evolution by Homogeneous Molybdenum Sulfide Clusters Supported by Dithiocarbamate Ligands.

Irradiation at 460 nm of [Mo3(µ3-S)(µ2-S2)3(S2CNR2)3]I ([2a]I, R = Me; [2b]I, R = Et; [2c]I, R = iBu; [2d]I, R = CH2C6H5) in a mixed aqueous-polar organic medium with [Ru(bipy)3]2+ as photosensitizer and Et3N as electron donor leads to H2 evolution. Maximum activity (300 turnovers, 3 h) is found with R = iBu in 1:9 H2O:MeCN; diminished activity is attributed to deterioration of [Ru(bipy)3]2+. Monitoring of the photolysis mixture by mass spectrometry suggests transformation of [Mo3(µ3-S)(µ2-S2)3(S2CNR2)3]+ to [Mo3(µ3-S)(µ2-S)3(S2CNR2)3]+ via extrusion of sulfur on a time scale of minutes without accumulation of the intermediate [Mo3S6(S2CNR2)3]+ or [Mo3S5(S2CNR2)3]+ species. Deliberate preparation of [Mo3S4(S2CNEt2)3]+ ([3]+) and treatment with Et2NCS21- yields [Mo3S4(S2CNEt2)4] (4), where the fourth dithiocarbamate ligand bridges one edge of the Mo3 triangle. Photolysis of 4 leads to H2 evolution but at ∼25% the level observed for [Mo3S7(S2CNEt2)3]+. Early time monitoring of the photolyses shows that [Mo3S4(S2CNEt2)4] evolves H2 immediately and at constant rate, while [Mo3S7(S2CNEt2)3]+ shows a distinctive incubation prior to a more rapid H2 evolution rate. This observation implies the operation of catalysts of different identity in the two cases. Photolysis solutions of [Mo3S7(S2CNiBu2)3]+ left undisturbed over 24 h deposit the asymmetric Mo6 cluster [(iBu2NCS2)3(µ2-S2)2(µ3-S)Mo3](µ3-S)(µ3-η2,η1-S',η1-S″-S2)[Mo3(µ2-S)3(µ3-S)(S2CNiBu2)2(µ2-S2CNiBu2)] in crystalline form, suggesting that species with this hexametallic composition and core topology are the probable H2-evolving catalysts in photolyses beginning with [Mo3S7(S2CNR2)3]+. When used as solvent, N,N-dimethylformamide (DMF) suppresses H2-evolution but to a greater degree for [Mo3S4(S2CNEt2)4] than for [Mo3S7(S2CNEt2)3]+. Recrystallization of [Mo3S4(S2CNEt2)4] from DMF affords [Mo3S4(S2CNEt2)4(η1,κO-DMF)] (5), implying that inhibition by DMF arises from competition for a Mo coordination site that is requisite for H2 evolution. Computational assessment of [Mo3S4(S2CNMe2)3]+ following addition of 2H+ and 2e- suggests a Mo(H)-µ2(SH) intermediate as the lowest energy species for H2 elimination. An analogous pathway may be available to the Mo6 cluster via dissociation of one end of the µ2-S2CNR2 ligand, a known hemilabile ligand type, in the [Mo3S4]4+ fragment.

Ligand Radicals as Modular Organic Electron Spin Qubits.

The intrinsic redox activity of the dithiolene ligand is presented here as the novel spin host in the design of a prototype molecular electron spin qubit, where the traditional roles of the metal and ligand components in coordination complexes are inverted. A series of paramagnetic bis(dithiolene) complexes with group 10 metals-nickel, palladium, platinum-provides a backdrop to investigate the spin dynamics of the organic ligand radical using pulsed EPR spectroscopy. The temperature dependence of the phase memory time (TM ) is shown to be dependent on the identity of the diamagnetic metal ion, with the short times recorded for platinum a consequence of a diminishing spin-lattice (T1 ) relaxation time driven by spin-orbit coupling. The utility of the radical ligand spin center is confirmed when it delivers one of the longest phase memory times ever recorded for a molecular two-qubit prototype.

Redox-Active Metallodithiolene Groups Separated by Insulating Tetraphosphinobenzene Spacers.

Compounds of the type [(S2C2R2)M(µ-tpbz)M(S2C2R2)] (R = CN, Me, Ph, p-anisyl; M = Ni, Pd, Pt; tpbz = 1,2,4,5-tetrakis(diphenylphosphino)benzene) have been prepared by transmetalation with [(S2C2R2)SnR'2] reagents, by direct displacement of dithiolene ligand from [M(S2C2R2)2] with 0.5 equiv of tpbz, or by salt metathesis using Na2[S2C2(CN)2] in conjunction with X2M(µ-tpbz)MX2 (X = halide). X-ray crystallography reveals a range of topologies (undulating, chair, bowed) for the (S2C2)M(P2C6P2)M(S2C2) core. The [(S2C2R2)M(µ-tpbz)M(S2C2R2)] (R = Me, Ph, p-anisyl) compounds support reversible or quasireversible oxidations corresponding to concurrent oxidation of the dithiolene terminal ligands from ene-1,2-dithiolates to radical monoanions, forming [(-S•SC2R2)M(µ-tpbz)M(-S•SC2R2)]2+. The R = Ph and p-anisyl compounds support a second, reversible oxidation of the dithiolene ligands to their α-dithione form. In contrast, [(S2C2(CN)2)Ni(tpbz)Ni(S2C2(CN)2)] sustains only reversible, metal-centered reductions. Spectroscopic examination of [(-S•SC2( p-anisyl)2)Ni(µ-tpbz)Ni(-S•SC2( p-anisyl)2)]2+ by EPR reveals a near degenerate singlet-triplet ground state, with spectral simulation revealing a remarkably small dipolar coupling constant of 18 × 10-4 cm-1 that is representative of an interspin distance of 11.3 Å. This weak interaction is mediated by the rigid tpbz ligand, whose capacity to electronically insulate is an essential quality in the development of molecular-based spintronic devices.

Expanding the Scope of Ligand Substitution from [M(S2C2Ph2] (M = Ni2+, Pd2+, Pt2+) To Afford New Heteroleptic Dithiolene Complexes.

The scope of direct substitution of the dithiolene ligand from [M(S2C2Ph2)2] [M = Ni2+ (1), Pd2+ (2), Pt2+ (3)] to produce heteroleptic species [M(S2C2Ph2)2Ln] (n = 1, 2) has been broadened to include isonitriles and dithiooxamides in addition to phosphines and diimines. Collective observations regarding ligands that cleanly produce [M(S2C2Ph2)Ln], do not react at all, or lead to ill-defined decomposition identify soft σ donors as the ligand type capable of dithiolene substitution. Substitution of MeNC from [Ni(S2C2Ph2)(CNMe)2] by L provides access to a variety of heteroleptic dithiolene complexes not accessible from 1. Substitution of a dithiolene ligand from 1 involves net redox disproportionation of the ligands from radical monoanions, -S•SC2Ph2, to enedithiolate and dithione, the latter of which is an enhanced leaving group that is subject to further irreversible reactions.

Binding of carboxylate and trimethylammonium salts to octa-acid and TEMOA deep-cavity cavitands.

In participation of the fifth statistical assessment of modeling of proteins and ligands (SAMPL5), the strength of association of six guests (3-8) to two hosts (1 and 2) were measured by 1H NMR and ITC. Each host possessed a unique and well-defined binding pocket, whilst the wide array of amphiphilic guests possessed binding moieties that included: a terminal alkyne, nitro-arene, alkyl halide and cyano-arene groups. Solubilizing head groups for the guests included both positively charged trimethylammonium and negatively charged carboxylate functionality. Measured association constants (K a ) covered five orders of magnitude, ranging from 56 M-1 for guest 6 binding with host 2 up to 7.43 × 106 M-1 for guest 6 binding to host 1.

Hairpin Furans and Giant Biaryls.

The thermal reaction of two cyclopentadienones with 5,5'-binaphthoquinone or 6,6'-dimethoxy-5,5'-binaphthoquinone in refluxing nitrobenzene (210 °C) gives, in a single synthetic step that includes two Diels-Alder additions, two decarbonylations, and two dehydrogenations, giant biaryl bisquinones (compounds 13, 14, 15, 18, and 21). However, when two cyclopentadienones react with 6,6'-dimethoxy-5,5'-binaphthoquinone in nitrobenzene at higher temperatures (250-260 °C), the resulting products are molecular ribbons composed of two twisted aromatic systems fused to a heteropentahelicene (19, 20, and 22). These molecules are representatives of a new class of chiral polycyclic aromatic compounds, the "hairpin furans". Interestingly, reheating a dimethoxy-substituted giant biaryl (e.g., 21) in nitrobenzene at 260 °C does not yield the corresponding hairpin furan (22), and mechanistic studies indicate that some intermediate or byproduct of the synthesis of the giant biaryls is a reagent or catalyst necessary for the conversion of the dimethoxybiaryl to the furan.

Synthesis and Structures of [LCu(I)(SSi(i)Pr3)] (L = triphos, carbene) and Related Compounds.

The mononuclear Cu(I) complexes [LCu(I)(SSi(i)Pr3)] (L = 1,1,1-tris(diphenylphosphinomethyl)ethane (triphos), 1,3-bis(2,4,6-trimethylphenyl)imidazol-2-ylidene (IMes)) have been prepared by ligand displacement from [LCu(I)Cl] with (i)Pr3SiS(-). Both compounds are colorless, diamagnetic species and have been characterized structurally by X-ray crystallography. The compounds [(IMes)Cu(η(1)κ(S)-SC(O)CH3)] and [(triphos)Cu(η(1)κ(S)-SC(S)OCH3)] have been prepared in the context of synthesis aimed at [LCu(η(1)κ(S)-SCOS)] and [LCu(η(1)κ(S)-SCS2)] complexes, which are intended as synthons toward an analogue of the Mo(µ-OSCO)Cu intermediate proposed as occurring in the catalytic cycle of carbon monoxide dehydrogenase (CODH).

The Hairpin Furans: Easily Prepared Hybrids of Helicenes and Twisted Acenes.

The thermal reaction of a cyclopentadienone with 6,6'-dimethoxy-5,5'-binaphthoquinone gives, in a single step, a molecular ribbon consisting of two twisted aromatic systems fused to a heteropentahelicene. Such molecules constitute a new class of chiral polycyclic aromatic compounds, the "hairpin furans".

Element misidentification in X-ray crystallography: a reassessment of the [MCl2(diazadiene)] (M = Cr, Mo, W) series.

A series of reports describing the syntheses and structures of [MCl2(diazadiene)] (M = Cr, Mo, W) complexes is reassessed in the context of known chemistry of low-valent Group VI metal complexes, crystallographic trends such as M-Cl bond lengths and unit cell volumes, and calculated metal-ligand bond lengths. Crystallographic data and computational results are inconsistent with any of these species being second or third row transition metal complexes. A review of the crystallographic information files accompanying the [MCl2(diazadiene)] (M = Mo, W) published structures reveals that the metal atoms were inappropriately treated with partial site occupancy factors (0.775 for Mo; 0.4005 and 0.417 for W), the effect of which was to manifest lighter-element behavior and better refinement in accord with the metal atoms' correct identity. A deliberate synthesis and characterization by X-ray diffraction of [ZnCl2((Mes)dad(Me))] ((Mes)dad(Me) = 1,4-bis(2,4,6-trimethylphenyl)-2,3-dimethyl-1,4-diaza-1,3-butadiene) are reported. Refinement of this structure with the same combination of second or third row metal and offsetting partial site occupancy is shown to provide final refinement statistics essentially the same as with the correct model employing M = Zn at site occupancy 1.00. Use of the published method for synthesis of [WCl2(diazadiene)] with (Mes)dad(Me) and [WBr4(MeCN)2] in lieu of [WCl4(MeCN)2] is shown to produce [ZnBr2((Mes)dad(Me))], which has also been characterized by X-ray diffraction. It is concluded that the unusual putative 12-electron [MCl2(diazadiene)] (M = Cr, Mo, W) complexes are in all cases the corresponding [ZnCl2(diazadiene)] complexes, Zn having been commonly employed as reducing agent in their synthesis.

A structural and spectroscopic investigation of octahedral platinum bis(dithiolene)phosphine complexes: platinum dithiolene internal redox chemistry induced by phosphine association.

The complexes [Pt(mdt)2] (4; mdt = methyldithiolene, [Me2C2S2](n-)), [Pt(adt)2] (5; adt = p-anisyldithiolene, [(MeO-p-C6H4)2C2S2](n-)), and [Pd(adt)2] (10) have been prepared in yields of ≥90% via transmetalation reactions with the corresponding [R2Sn(S2C2R'2)] complexes (R = (n)Bu, R' = Me; R = Me, R' = -C6H4-p-OMe, 3). Intraligand C-S and C-Cchelate bond lengths (~1.71 and ~1.40 Å, respectively) obtained by X-ray crystallography show these compounds to be comprised of radical monoanions mdt(•-) and adt(•-). The six-coordinate octahedral adducts [Pt(adt)2(dppe)] [6; dppe = 1,2-bis(diphenylphosphino)ethane], trans-[Pt(adt)2(PMe3)2] (8), and trans-[Pt(mdt)2(PMe3)2] (9) have also been prepared, and crystal structures reveal dithiolene ligands that are fully reduced ene-1,2-dithiolates (C-S and C-C(chelate) = ~1.77 and 1.35 Å, respectively). Reduction of the dithiolene ligand thus occurs to accommodate the +IV oxidation state typical of octahedral six-coordinate platinum. The cyclic voltammogram of 5 shows two fully reversible reductions at -0.11 and -0.84 V in CH2Cl2 (vs Ag/AgCl), attributed to successive (adt(•-) + e(-) → adt(2-)) processes, and a reversible oxidation at +1.01 V. The cyclic voltammogram of 9 shows two reversible oxidations at +0.38 and +0.86 V, which are assigned as successive (adt(2-) → adt(•-) + e(-)) oxidations. Consistent with their formulation as having fully reduced dithiolene ligands, the UV-vis spectra for 6, 8, and 9 show no low-energy absorptions below 700 nm, and the S K-edge XAS spectra of 6 and 8 show dithiolene sulfur that is reduced relative to that in 5. The introduction of PMe3 to 10 did not produce the palladium analogue of 8 but rather [Pd(adt)(PMe3)2] (11). The reaction of [PdCl2(PPh3)2] with Li2(mdt) produced a mixture of [Pd(mdt)(PPh3)2] (12, 20%) and [(Ph3P)Pd(µ-1,2-mdt-S,S':S)2Pd(PPh3)] (13, 28%), with the latter having C2 symmetry with a Pd2S2 core structure folded along the S···S axis.

X-ray absorption spectroscopy systematics at the tungsten L-edge.

A series of mononuclear six-coordinate tungsten compounds spanning formal oxidation states from 0 to +VI, largely in a ligand environment of inert chloride and/or phosphine, was interrogated by tungsten L-edge X-ray absorption spectroscopy. The L-edge spectra of this compound set, comprised of [W(0)(PMe3)6], [W(II)Cl2(PMePh2)4], [W(III)Cl2(dppe)2][PF6] (dppe = 1,2-bis(diphenylphosphino)ethane), [W(IV)Cl4(PMePh2)2], [W(V)(NPh)Cl3(PMe3)2], and [W(VI)Cl6], correlate with formal oxidation state and have usefulness as references for the interpretation of the L-edge spectra of tungsten compounds with redox-active ligands and ambiguous electronic structure descriptions. The utility of these spectra arises from the combined correlation of the estimated branching ratio of the L3,2-edges and the L1 rising-edge energy with metal Zeff, thereby permitting an assessment of effective metal oxidation state. An application of these reference spectra is illustrated by their use as backdrop for the L-edge X-ray absorption spectra of [W(IV)(mdt)2(CO)2] and [W(IV)(mdt)2(CN)2](2-) (mdt(2-) = 1,2-dimethylethene-1,2-dithiolate), which shows that both compounds are effectively W(IV) species even though the mdt ligands exist at different redox levels in the two compounds. Use of metal L-edge XAS to assess a compound of uncertain formulation requires: (1) Placement of that data within the context of spectra offered by unambiguous calibrant compounds, preferably with the same coordination number and similar metal ligand distances. Such spectra assist in defining upper and/or lower limits for metal Zeff in the species of interest. (2) Evaluation of that data in conjunction with information from other physical methods, especially ligand K-edge XAS. (3) Increased care in interpretation if strong π-acceptor ligands, particularly CO, or π-donor ligands are present. The electron-withdrawing/donating nature of these ligand types, combined with relatively short metal-ligand distances, exaggerate the difference between formal oxidation state and metal Zeff or, as in the case of [W(IV)(mdt)2(CO)2], exert the subtle effect of modulating the redox level of other ligands in the coordination sphere.

The single-atom R1: a new optimization method to solve crystal structures.

A crystal structure with N atoms in its unit cell can be solved starting from a model with atoms 1 to j - 1 being located. To locate the next atom j, the method uses a modified definition of the traditional R1 factor where its dependencies on the locations of atoms j + 1 to N are removed. This modified R1 is called the single-atom R1 (sR1), because the locations of atoms 1 to j - 1 in sR1 are the known parameters, and only the location of atom j is unknown. Finding the correct position of atom j translates thus into the optimization of the sR1 function, with respect to its fractional coordinates, xj, yj, zj. Using experimental data, it has been verified that an sR1 has a hole near each missing atom. Further, it has been verified that an algorithm based on sR1, hereby called the sR1 method, can solve crystal structures (with up to 156 non-hydrogen atoms in the unit cell). The strategy to carry out this calculation has also been optimized. The main feature of the sR1 method is that, starting from a single arbitrarily positioned atom, the structure is gradually revealed. With the user's help to delete poorly determined parts of the structure, the sR1 method can build the model to a high final quality. Thus, sR1 is a viable and useful tool for solving crystal structures.

Bis[tris-(diiso-butyl-dithio-carbamato)-µ3-sulfido-tri-µ2-di-sulfido-trimolybdenum(IV)] sulfide tetra-hydro-furan monosolvate.

The title compound, [Mo3(C9H18NS2)3(S2)3S]2S, crystallizes on a general position in the monoclinic space group P21/n (No. 14). The cationic [Mo3S7(S2CNiBu2)3]+ fragments are joined by a mono-sulfide dianion that forms close S⋯S contacts to each of the di-sulfide ligands on the side of the Mo3 plane opposite the µ3 2- ligand. The two Mo3 planes are inclined at an angle of 40.637 (15)°, which gives the assembly an open clamshell-like appearance. One µ6-S2-⋯S2 2- contact, at 2.4849 (14) Å, is appreciably shorter than the remaining five, which are in the range 2.7252 (13)-2.8077 (14) Å.

Ethyl 2-[(2-oxo-2H-chromen-6-yl)-oxy]acetate.

Ethyl 2-[(2-oxo-2H-chromen-6-yl)-oxy]acetate, C13H12O5, a member of the pharmacologically important class of coumarins, crystallizes in the monoclinic C2/c space group in the form of sheets, within which mol-ecules are related by inversion centers and 21 axes. Multiple C-H⋯O weak hydrogen-bonding inter-actions reinforce this pattern. The planes of these sheets are oriented in the approximate direction of the ac face diagonal. Inter-sheet inter-actions are a combination of coumarin system π-π stacking and additional C-H⋯O weak hydrogen bonds between ethyl acet-oxy groups.

Ancillary ligand effects upon dithiolene redox noninnocence in tungsten bis(dithiolene) complexes.

An expanded set of compounds of the type [W(S2C2Me2)2L1L2](n) (n = 0: L1 = L2 = CO, 1; L1 = L2 = CN(t)Bu, 2; L1 = CO, L2 = carbene, 3; L1 = CO, L2 = phosphine, 4; L1 = L2 = phosphine, 5. n = 2-: L1 = L2 = CN(-), [6](2-)) has been synthesized and characterized. Despite isoelectronic formulations, the compound set reveals gradations in the dithiolene ligand redox level as revealed by intraligand bond lengths, υ(CCchelate), and rising edge energies in the sulfur K-edge X-ray absorption spectra (XAS). Differences among the terminal series members, 1 and [6](2-), are comparable to differences seen in homoleptic dithiolene complexes related by full electron transfer to/from a dithiolene-based MO. The key feature governing these differences is the favorable energy of the CO π* orbitals, which are suitably positioned to overlap with tungsten d orbitals and exert an oxidizing effect on both metal and dithiolene ligand via π-backbonding. The CN(-) π* orbitals are too high in energy to mix effectively with tungsten and thus leave the filled dithiolene π* orbitals unperturbed. This work shows how, and the degree to which, the redox level of a noninnocent ligand can be modulated by the choice of ancillary ligands(s).