Reinforcing 2D Single-Crystal Bi2O2CO3 with Additional Interlayer Carbonates by CO2-Assisted Solid-to-Solid Phase Transition.

A facile gaseous CO2 mediated solid-to-solid transformation principle is adopted to insert additional CO3 2- anions into the thin single-crystal nanosheets of Bi2O2CO3, which is built of periodic arrays of intrinsic CO3 2- anions and (Bi2O2)2+ layers. The additional CO3 2- anions create abundant defects. The Bi2O2CO3 nanosheets with rich interlayer CO3 2- exhibit superior electronic properties and charge transfer kinetics than the pristine single-crystal 2D Bi2O2CO3 and display enhanced catalytic activity in photocatalytic CO2 reduction reaction and the photocatalytic oxidative degradation of organic pollutants. This work thus illustrates interlayer engineering as a flexible means to build layered 2D materials with excellent properties.

Low energy consumption vortex wave flow membrane bioreactor.

In order to reduce the energy consumption and membrane fouling of the conventional membrane bioreactor (MBR), a kind of low energy consumption vortex wave flow MBR was exploited based on the combination of biofilm process and membrane filtration process, as well as the vortex wave flow technique. The experimental results showed that the vortex wave flow state in the membrane module could be formed when the Reynolds number (Re) of liquid was adjusted between 450 and 1,050, and the membrane flux declined more slowly in the vortex wave flow state than those in the laminar flow state and turbulent flow state. The MBR system was used to treat domestic wastewater under the condition of vortex wave flow state for 30 days. The results showed that the removal efficiency for CODcr and NH3-N was 82% and 98% respectively, and the permeate quality met the requirement of 'Water quality standard for urban miscellaneous water consumption (GB/T 18920-2002)'. Analysis of the energy consumption of the MBR showed that the average energy consumption was 1.90 ± 0.55 kWh/m3 (permeate), which was only two thirds of conventional MBR energy consumption.

Fabrication of europium-doped silica optical fiber with high Verdet constant.

A europium-doped (Eu-doped) silica optical fiber is fabricated using modified chemical vapor deposition (MCVD) technology. Europium fluoride (EuF3) material is introduced into the fiber core with a high temperature vaporizing technique. Its concentration is approximately 0.11 at %. The outer and core diameters of doped fiber are approximately 122 and 9 µm, respectively. Refractive index difference (RID) between core and cladding is approximately 2%. A magneto-optical effect measurement system, which is based on the Stokes polarization parameters method, is set up to analyze its magneto-optical properties. The Verdet constant of the Eu-doped optical fiber is -4.563 rad T-1m-1, which is approximately double than that of single mode fiber (SMF) at 660 nm.

Fabrication of bilayer tetrathiafulvalene integrated surface covalent organic frameworks.

A bilayer covalent organic framework (COF) of TTF-based building blocks was obtained by imine reaction between tetrathiafulvalene tetraaldehyde (4ATTF) and p-phenylenediamine (PPDA). Direct evidence for the eclipsed stacking of bilayer structure via π-π interaction between TTF units is provided by high resolution scanning tunneling microscopy.

Substrate Orientation Effect in the On-Surface Synthesis of Tetrathiafulvalene-Integrated Single-Layer Covalent Organic Frameworks.

The on-surface reactions of tetrathiafulvalene equipped with four benzaldehyde groups (4ATTF) and ditopic diamine molecules are investigated. 4ATTF tends to form large-scale-ordered rhombus structures when reacted with p-phenylenediamine (PPDA). A longer ditopic diamine molecule, 1,1'-biphenyl-4,4'-diamine dihydrochloride (BPDA), causes the domain size of the regular rhombus structure to decrease and triangular and irregular rhombus structures to appear upon reaction with 4ATTF. However, in the rhombus structures formed by different-length ditopic diamine molecules, the single-layer covalent organic frameworks on the graphite surface preferentially orient in alignment with the underlying HOPG substrate lattice.

Electrostatic-interaction-induced molecular deposition of a hybrid bilayer on Au(111): a scanning tunneling microscopy study.

Hybrid bilayers consisting of 8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt (HPTS) and meso-tetra(4-pyridyl)porphine (TPyP) have been successfully constructed on Au(111) and investigated by electrochemical scanning tunneling microscopy (ECSTM). Under the guidance of the electrostatic interaction between negatively charged sulfonate groups and positively charged pyridyl groups, the underlying HPTS arrays act as templates for the deposition of cationic TPyPs, forming two types of TPyP/HPTS complex bilayers. The present work provides a feasible way to fabricate hybrid multilayers on the electrode surface via electrostatic interaction, which has great significance for the design of molecular nanodevices.

One-step preparation of single-layered graphene quantum dots for the detection of Fe3.

Single-layer graphene quantum dots are highly desirable while their facile and controllable preparations remain challenging. Herein, single-layered graphene quantum dots (sl-GQDs) were developed via a facile one-step hydrothermal synthesis, with citric acid and ß-cyclodextrin (CD) as starting materials. The sl-GQDs decorated with CD molecules emit green fluorescence with a quantum yield of 5.34%, and exhibit a good response exclusively to ferric ions for their structural oxygenous groups. The linear range of the proposed sensor for ferric ions was found in a wide concentration range of 0-85 µM. The detection limit is about 0.26 µM. The sl-GQDs based sensing platform also demonstrates its feasibility in real water sample analysis with recoveries of 93.8%-101.5%.

Visible to near-infrared photodetector with novel optoelectronic performance based on graphene/S-doped InSe heterostructure on h-BN substrate.

van der Waals heterostructures of two-dimensional (2D) materials have attracted considerable attention due to their flexibility in the design of new functional devices. Despite numerous studies on graphene/2D semiconductor heterostructures, their optoelectronic applications are significantly hindered because of several disadvantages, such as large band gaps and chemical instability. In this work, we demonstrate the fabrication of graphene/S-doped InSe heterostructure photodetectors with excellent photoresponse performance, and this is attributed to the moderate band gap and band gap engineering by element doping of InSe as well as the high carrier mobility of graphene. In particular, the graphene/InSe0.9S0.1 device achieves an ultrahigh photoresponsivity of ∼4.9 × 106 A W-1 at 700 nm and an EQE of 8.7 × 108%, and it exhibits broadband photodetection (visible to near-infrared). More importantly, by virtue of the interaction between n-type graphene arising from the influence of h-BN as a dielectric layer and S-doped InSe with a high work-function, our devices always exhibited positive photocurrent when the polarity of the gate voltage is adjusted, and is different from that the previously reported graphene/2D semiconductor photodetectors. This work not only provides a promising platform for highly efficient broadband photodetectors but also sheds light on tuning the optoelectronic performance through band gap engineering and designing novel heterostructures-based various 2D materials.

Directed assembly of fullerene on modified Au(111) electrodes.

Here we show a conceptual approach to realize the scanning tunneling microscopy based induced-assembly of fullerene (C60) molecules on top of a buffer organic adlayer at room temperature in a solution environment. The realization of spatially-defined C60 assembly is attributed to the modulation of substrate-molecular interactions with the assistance of a buffer layer.

Simultaneous construction of two linkages for the on-surface synthesis of imine-boroxine hybrid covalent organic frameworks.

The orthogonality between the Schiff base reaction and the boronic acid dehydration reaction is explored during the on-surface synthesis process. By activating the above two reactions in one-step and employing asymmetrical substituted monomers and the 3-fold symmetric monomer 1,3,5-tris(4-aminophenyl)benzene (TAPB), highly ordered imine-boroxine hybrid single-layered covalent organic frameworks (sCOFs) have been successfully constructed on HOPG by a gas-solid interface reaction method and characterized by scanning tunnelling microscopy (STM). In particular, the reaction between the meta-substituted monomer and TAPB generates sCOFB with a windmill structure, which is the first sCOF with surface chirality so far reported. The demonstration of the one-step synthesis of multiple linkages to form sCOFs can further enlarge the sCOF family and expand the design routes for functional 2D organic nanomaterials.