Paper-Based Analytical Devices for Accurate Assessment of Transferrin Saturation in Diagnosed Clinical Samples from Ischemic Stroke Patients.

For the first time, a paper-based analytical device (PAD) was developed for the assessment of transferrin saturation (TSAT), which is defined as the ratio between iron bound to transferrin (Tf) and the total iron-binding capacity (TIBC) of Tf. Both parameters were simultaneously measured on the same PAD using ferrozine as a chromophore and a smartphone as the color reader. To this end, Tf was first isolated from serum using anti-Tf immunomagnetic beads to ensure that only the Tf-bound iron was measured, improving the selectivity and accuracy of TSAT assessment. To demonstrate the practical utility of the device, it was validated by analyzing a certified reference material, showing excellent accuracy (Er < 4%) and good precision (RSD ≤ 6%). Finally, 18 diagnosed serum samples from ischemic stroke patients were analyzed by this approach, and the results were compared with those obtained by urea-PAGE, showing not only an excellent correlation (r = 0.93, p < 0.05) but that the PAD approach has become statistically identical to the free-interference urea-PAGE. In comparison with the slow, tedious, and non-miniaturized-PAGE, this PAD approach exhibited attractive characteristics such as low cost, disposability, and connectivity, showing great potential for future point-of-care testing, especially in developing countries and/or remote areas, where access to medical or clinical facilities is limited.

Effect of nanocellulose polymorphism on electrochemical analytical performance in hybrid nanocomposites with non-oxidized single-walled carbon nanotubes.

Two cellulose nanocrystals/single-walled carbon nanotube (CNC/SW) hybrids, using two cellulose polymorphs, were evaluated as electrochemical transducers: CNC type I (CNC-I/SW) and CNC type II (CNC-II/SW). They were synthesized and fully characterized, and their analytical performance as electrochemical sensors was carefully studied. In comparison with SWCNT-based and screen-printed carbon electrodes, CNC/SW sensors showed superior electroanalytical performance in terms of sensitivity and selectivity, not only in the detection of small metabolites (uric acid, dopamine, and tyrosine) but also in the detection of complex glycoproteins (alpha-1-acid glycoprotein (AGP)). More importantly, CNC-II/SW exhibited 20 times higher sensitivity than CNC-I/SW for AGP determination, yielding a LOD of 7 mg L-1.These results demonstrate the critical role played by nanocellulose polymorphism in the electrochemical performance of CNC/SW hybrid materials, opening new directions in the electrochemical sensing of these complex molecules. In general, these high-active-surface hybrids smartly exploited the preserved non-oxidized SW conductivity with the high aqueous dispersibility of the CNC, avoiding the use of organic solvents or the incorporation of toxic surfactants during their processing, making the CNC/SW hybrids promising nanomaterials for electrochemical detection following greener approaches.

Disposable carbon nanotube scaffold films for fast and reliable assessment of total α1-acid glycoprotein in human serum using adsorptive transfer stripping square wave voltammetry.

Alpha-1-acid glycoprotein (AGP) is a serum glycoprotein whose levels are increased two or three times during disease or injury. This makes it a potential biomarker for inflammatory bowel diseases and sepsis. Consequently, fast, simple, and cheap analytical methods for prognosis, diagnosis, and follow-up of these diseases are demanded. In this work, we propose a simple electrochemical approach based on carbon nanotubes scaffold films (CNSFs) for total AGP determination in serum samples. Firstly, AGP is labeled with an electrochemical tag (osmium(VI) complex), and then the total amount of AGP is quantified by adsorptive transfer stripping square wave voltammetry (AdTSWV). Multi-walled carbon nanotubes scaffold films (MWSFs) yielded the best analytical performance in terms of sensitivity with a good limit of detection of 0.6 mg L-1 for AGP determination in serum samples, in less than 20 min. A simplified AGP calibration and its sequential serum sample analysis strategy with good accuracy (81%) and excellent reproducibility (RSD < 1%) was additionally proposed to meet the point-of-care/needs requirements. Graphical abstract Multi-walled carbon nanotubes scaffold films for total AGP determination on disposable platforms integrating single-point calibration and sequential sample analysis.

Integrated calibration and serum iron in situ analysis into an array microfluidic paper-based analytical device with smartphone readout.

In this work, a colorimetric microfluidic paper-based analytical device (µPAD) combined with a smartphone readout was proposed for the determination of serum iron (Fe3+), which is linked to transferrin. Firstly, Fe3+ was selectively isolated and preconcentrated from serum by using anti-transferrin immunomagnetic beads (anti-Tf-MBs). Secondly, Fe3+ is reduced to Fe2+ by a hydroxylamine solution (pH 4.8) and then measured in the µPAD, which contains the colorimetric reagent ferrozine. Finally, the intensity of the purple color formed in the µPAD was measured by a smartphone. The approach exhibited an excellent linear correlation (r = 0.996) and good limit of detection (0.3 µg mL-1). Moreover, a certified reference material (human serum) was analyzed by this approach, showing an excellent accuracy (Er < 4%) and inter-device reproducibility (RSD = 1%, n = 3). Interestingly, the µPAD array-design allowed the simultaneous analysis of different samples, improving the sample throughput (up to 5 samples in 130 min, using 100 µL each), and the integration of calibration and analysis into the same device, simplifying the analysis without losing accuracy or sensitivity, and avoiding inter-device variability, which constituted an added value to this approach. These disposable µPADs meet several requirements of point-of-care testing (POCT) because it is cheap, portable, easy-to-use, sensitive, and specific. Therefore, it may be an interesting way for measuring patients' serum iron levels in situ with reliability, especially, in developing countries, where the prevalence of iron deficiency and iron-deficiency anemia is higher and there are lower health resources than in developed countries.

Pyridine-4-thiol as halogen-bond (HaB) acceptor: influence of the noncovalent interaction in its reactivity.

The study of pyridine-4-thiol as a halogen-bond (HaB) acceptor has allowed the isolation of its cocrystal with the HaB donor IC6F4I, namely, 1,2,4,5-tetrafluoro-3,6-diiodobenzene bis(pyridin-1-ium-4-ylsulfanide), C6F4I2·2C5H5NS (1), where the S atom is the HaB acceptor, while the pyridine position is blocked by the proton. Furthermore, the S atom acts a dual acceptor and also establishes an interaction with the pyridinium proton from an adjacent molecule. The presence of these interactions in 1 contributes to the stabilization of the zwitterionic form. This pre-organization seems to have an influence on the reactivity of the compound since when left in dichloromethane solution, an unusual activation of the C-Cl bond is observed that leads to the formation of the bis[(pyridin-1-ium-4-yl)sulfanyl]methane dication, while the Cl atoms are still present as chloride counter-ions, i.e. 4,4'-[methanediyldi(sulfanediyl)]dipyridinium dichloride, C11H12N2S22+·2Cl- (2). In the crystal structure of 2 it is observed that the S atom is now acting as the donor part of a chalcogenide bond with the chloride anions.