Hydrogen Evolving Activity of Dithiolene-Based Metal-Organic Frameworks with Mixed Cobalt and Iron Centers.

Electrocatalytic systems based on metal-organic frameworks (MOFs) have attracted great attention due to their potential application in commercially viable renewable energy-converting devices. We have recently shown that the cobalt 2,3,6,7,10,11-triphenylenehexathiolate (CoTHT) framework can catalyze the hydrogen evolution reaction (HER) in fully aqueous media with Tafel slopes as low as 71 mV/dec and near-unity Faradaic efficiency (FE). Taking advantage of the high synthetic tunability of MOFs, here, we synthesize a series of iron and mixed iron/cobalt THT-based MOFs. The incorporation of the iron and cobalt dithiolene moieties is verified by various spectroscopic techniques, and the integrity of the crystalline structure is maintained regardless of the stoichiometries of the two metals. The hydrogen evolving activity of the materials was explored in pH 1.3 aqueous electrolyte solutions. Unlike CoTHT, the FeTHT framework exhibits minimal activity due to a late catalytic onset [-0.440 V versus reversible hydrogen electrode (RHE)] and a large Tafel slope (210 mV/dec). The performance of the mixed-metal MOFs is adversely affected by the incorporation of Fe, where increasing Fe content results in MOFs with lower HER activity and diminished long-term stability and FE for H2 production. It is proposed that the FeTHT domains undergo alternative Faradaic processes under catalytic conditions, which alter its local structure and electrochemical behavior, eventually resulting in a material with diminished HER performance.

Room Temperature Metallic Conductivity in a Metal-Organic Framework Induced by Oxidation.

Metal-organic frameworks (MOFs) containing redox active linkers have led to hybrid compounds exhibiting high electrical conductivity, which enables their use in applications in electronics and electrocatalysis. While many computational studies predict two-dimensional (2D) MOFs to be metallic, the majority of experiments show decreasing conductivity on cooling, indicative of a gap in the electronic band structure. To date, only a handful of MOFs have been reported that exhibit increased electrical conductivity upon cooling indicative of a metallic character, which highlights the need for a better understanding of the origin of the conductivity. A 2D MOF containing iron bis(dithiolene) motifs was recently reported to exhibit semiconducting behavior with record carrier mobility. Herein, we report that high crystallinity and the elimination of guest species results in an iron 2,3,6,7,10,11-tripheylenehexathiolate (THT) MOF, FeTHT, exhibiting a complex transition from semiconducting to metallic upon cooling, similar to what was shown for the analogous CoTHT. Remarkably, exposing the FeTHT to air significantly influences the semiconducting-to-metallic transition temperature (100 to 300 K) and ultimately results in a material showing metallic-like character at, and above, room temperature. This study indicates these materials can tolerate a substantial degree of doping that ultimately results in charge delocalization and metallic-like conductivity, an important step toward enabling their use in chemiresistive sensing and optoelectronics.

Metallic Conductivity in a Two-Dimensional Cobalt Dithiolene Metal-Organic Framework.

Two-dimensional (2D) metal-organic frameworks (MOFs) have received a great deal of attention due to their relatively high charge carrier mobility and low resistivity. Here we report on the temperature-dependent charge transport properties of a 2D cobalt 2,3,6,7,10,11-triphenylenehexathiolate framework. Variable temperature resistivity studies reveal a transition from a semiconducting to a metallic phase with decreasing temperature, which is unprecedented in MOFs. We find this transition to be highly dependent on the film thickness and the amount of solvent trapped in the pores, with density functional theory calculations of the electronic-structure supporting the complex metallic conductivity of the material. These results identify the first experimentally observed MOF that exhibits band-like metallic conductivity.

Room Temperature Dissolution of Bulk Elemental Ni and Se for Solution Deposition of a NiSe2 HER Electrocatalyst.

With hydrogen fuel becoming a more viable alternative to fossil fuels comes the need for inexpensive, low-energy hydrogen production. Here, a low-temperature direct solution-processing method is presented for the deposition of earth-abundant pyrite-type NiSe2 as an efficient hydrogen evolution reaction (HER) catalyst. Thin films of phase-pure NiSe2 are deposited from a precursor ink prepared by room-temperature dissolution of bulk elemental Ni and Se in a binary thiolamine solvent mixture. The nanostructured NiSe2 thin films demonstrate high HER catalytic activity with 100% Faradaic efficiency.

Efficient Electrochemical and Photoelectrochemical H2 Production from Water by a Cobalt Dithiolene One-Dimensional Metal-Organic Surface.

Solar-driven hydrogen evolution from water has emerged as an important methodology for the storage of renewable energy in chemical bonds. Efficient and practical clean-energy devices for electrochemical or photoelectrochemical splitting of water require the immobilization of stable and active hydrogen-evolving catalysts onto electrode or photocathode materials, which remains a significant challenge. Here we show that cobalt(II) reacts with benzene-1,2,4,5-tetrathiol in the presence of base to form a cobalt dithiolene polymer 1. The generated polymer is immobilized onto glassy carbon electrodes (GCE) to generate a metal-organic surface (MOS 1|GCE), which displays efficient H2-evolving activity and stability in acidic aqueous solutions. Moreover, the generated polymer is integrated with planar p-type Si to generate very efficient photocathode materials (MOS 1|Si) for solar-driven hydrogen production from water. Photocurrents up to 3.8 mA/cm(2) at 0 V vs RHE were achieved under simulated 1 Sun illumination. MOS 1|Si photocathodes operate at potentials 550 mV more positive than MOS 1|GCE cathodes to reach the same activity for H2 evolution from water (1 mA/cm(2)).

Improving and Understanding the Hydrogen Evolving Activity of a Cobalt Dithiolene Metal-Organic Framework.

Despite the promising previous reports on the development of electrocatalytic dithiolene-based metal-organic frameworks (MOFs) for the hydrogen evolution reaction (HER), these materials often display poor reproducibility of the HER performance because of their poor bulk properties upon integration with electrode materials. We demonstrate here an in-depth investigation of the electrocatalytic HER activity of a cobalt 2,3,6,7,10,11-triphenylenehexathiolate (CoTHT) MOF. To enhance the durability and charge transport properties of the constructed CoTHT/electrode architecture, CoTHT is deposited as an ink composite (1) composed of Nafion and carbon black. We leverage here the well-established use of catalyst inks in the literature to increase adhesion of the catalyst to the electrode surface and to improve the overall electrical conductivity of the integrated catalyst/electrode. The utilization of the composite 1 leads to a significant improvement in the overpotential (η) to reach a current density of 10 mA/cm2 (η = 143 mV) compared to prior reports, resulting in the most active MOF-based electrocatalyst for the HER that contains only earth-abundant elements. Extensive density functional theory (DFT) calculations were applied to understand the structure of CoTHT and the mechanistic pathways of the HER. The computational results suggest that an AB stacking geometry is energetically favorable, where one layer is slipped by 1.6 Šrelative to the neighboring one along the a and b vectors. Additionally, the DFT calculations indicate that the catalytic cycle likely involves a Volmer discharge step to generate a cobalt hydride, followed by a Heyrovsky step to form a cobalt-H2 intermediate, and finally the dissociation of H2.

Electrocatalytic CO2 Reduction over Cu3P Nanoparticles Generated via a Molecular Precursor Route.

The design of nanoparticles (NPs) with tailored morphologies and finely tuned electronic and physical properties has become a key strategy for controlling selectivity and improving conversion efficiency in a variety of important electrocatalytic transformations. Transition metal phosphide NPs, in particular, have emerged as a versatile class of catalytic materials due to their multifunctional active sites and composition- and phase-dependent properties. Access to targeted transition metal phosphide NPs with controlled features is necessary to tune the catalytic activity. To this end, we have established a solution-synthesis route utilizing a molecular precursor containing M-P bonds to generate solid metal phosphide NPs with controlled stoichiometry and morphology. We expand here the application of molecular precursors in metal phosphide NP synthesis to include the preparation of phase-pure Cu3P NPs from the thermal decomposition of [Cu(H)(PPh3)]6. The mechanism of [Cu(H)(PPh3)]6 decomposition and subsequent formation of Cu3P was investigated through modification of the reaction parameters. Identification and optimization of the critical reaction parameters (i.e., time, temperature, and oleylamine concentration) enabled the synthesis of phase-pure 9-11 nm Cu3P NPs. To probe the multifunctionality of this materials system, Cu3P NPs were investigated as an electrocatalyst for CO2 reduction. At low overpotential (-0.30 V versus RHE) in 0.1 M KHCO3 electrolyte, Cu3P-modified carbon paper electrodes produced formate (HCOO-) at a maximum Faradaic efficiency of 8%.

A 2,2'-bipyridine-containing covalent organic framework bearing rhenium(i) tricarbonyl moieties for CO2 reduction.

The reduction of CO2 into higher energy products such as carbon-based fuels and feedstocks is an attractive strategy for mitigating the continuous rise in CO2 emissions associated with the growing global energy demand. Rhenium tricarbonyl complexes bearing 2,2'-bipyridine (2,2'-bpy) ligands are well-established molecular electrocatalysts for the selective reduction of CO2 to CO. Construction of efficient devices for this electrochemical process requires the immobilization of electrocatalysts to electrode surfaces. To integrate Re(2,2'-bpy)(CO)3 fragments into a covalent organic framework (COF), Re(5,5'-diamine-2,2'-bpy)(CO)3Cl (1) was synthesized and electrochemically investigated. Complex 1 is an active and selective electrocatalyst for the reduction of CO2 to CO with excellent faradaic efficiency (99%). The presence of the amine substituents leads to a destabilization of the π* orbital of the 5,5'-diamine-2,2'-bpy ligand with respect to the metal center. Therefore, 1 requires more negative potentials (-2.47 V vs. Fc+/0) to reach the doubly reduced catalytically active species. DFT studies were conducted to understand the electronic structure of 1, and support the destabilizing effect of the amine substituents. The Re-2,2'-bpy fragments were successfully integrated into a COF containing 2,2'-bpy moieties (COF-2,2'-bpy) via a post-metallation synthetic route to generate COF-2,2'-bpy-Re. A composite of COF-2,2'-bpy-Re, carbon black, and polyvinylidene fluoride (PVDF) was readily immobilized onto glassy carbon electrodes and electrocatalytic CO2 reduction to CO was observed at -2.8 V vs. Fc0/+, with a faradaic efficiency of 81% for CO production.

Evaluation of the H2 Evolving Activity of Benzenehexathiolate Coordination Frameworks and the Effect of Film Thickness on H2 Production.

The design of earth-abundant catalysts for the electrochemical production of H2 from water is important for the realization of a sustainable energy future. Incorporation of molecular catalysts into extended frameworks has emerged as a viable strategy for improving catalytic performance and durability while maintaining a high degree of control over the structure and properties of the catalytic active site. Here, we investigate benzenehexathiolate (BHT) coordination frameworks as electrocatalysts for the hydrogen evolution reaction (HER) in pH 1.3 aqueous solutions. The electrocatalytic HER activity of BHT-based coordination frameworks follows the order of CoBHT > NiBHT > FeBHT. CoBHT operates at an overpotential of 185 mV, the lowest observed overpotential of the reported metal dithiolene-based metal organic frameworks and coordination polymers to date. To further understand the properties that dictate electrocatalytic activity, the effect of film thickness on the HER performance of CoBHT, a parameter that has not been extensively explored for electrocatalytic coordination frameworks, was examined. As the thickness was increased to ∼1 µm, charge and proton transfer through CoBHT was hindered, the number of electrochemically accessible active sites decreased, and the mechanical robustness of the modified electrode was diminished. The observed thickness-dependent HER activity of CoBHT highlights the importance of practical electrode construction and offers insight into how to optimize proton and electron transfer properties and active site densities within coordination frameworks without reducing the mechanical robustness of the immobilized catalysts.

Electrocatalytic Metal-Organic Frameworks for Energy Applications.

With the global energy demand expected to increase drastically over the next several decades, the development of a sustainable energy system to meet this increase is paramount. Renewable energy sources can be coupled with electrochemical conversion processes to store energy in chemical bonds. To promote these difficult transformations, electrocatalysts that operate at high conversion rates and efficiency are required. Metal-organic frameworks (MOFs) have emerged as a promising class of materials; however, the insulating nature of MOFs has limited their application as electrocatalysts. The recent development of conductive MOFs has led to several electrocatalytic MOFs that display activity comparable to that of the best-performing heterogeneous catalysts. Although many electrocatalytic MOFs exhibit low activity and stability, the few successful examples highlight the possibility of MOF electrocatalysts as replacements for noble-metal-based catalysts in commercial energy-converting devices. We review herein the use of pristine MOFs as electrocatalysts to facilitate important energy-related reactions.

H2 evolution by a cobalt selenolate electrocatalyst and related mechanistic studies.

[Co(bds)2][nBu4N] (where bds = 1,2-benzenediselenolate) was identified as an electrocatalyst for the hydrogen evolution reaction. Mechanistic studies indicated that a black precipitate, which formed upon treating [Co(bds)2]- with acid, as well as the one-electron reduced species, [Co(bds)2]2-, were viable catalytic intermediates. We propose two kinetically-competent pathways for H2 evolution: EC and CE (E = electrochemical, C = chemical step).

One dimensional metal dithiolene (M = Ni, Fe, Zn) coordination polymers for the hydrogen evolution reaction.

Immobilization of metal complexes to electrode surfaces has emerged as an attractive strategy to combine homogeneous and heterogeneous catalysis. We recently reported the immobilization of cobalt dithiolene catalytic units via incorporation into extended one and two dimensional (1D and 2D) frameworks. We extend here this methodology to the formation of 1D nickel, iron, and zinc dithiolene coordination polymers based on benzene-1,2,4,5-tetrathiolate (BTT) frameworks and investigate their catalytic H2-evolving activities under fully aqueous conditions. The nickel dithiolene coordination polymer is an active electrocatalyst for the hydrogen evolution reaction (HER). An overpotential of 470 mV was required to reach a current density of 10 mA cm-2 at pH 1.3, making this system one of the best performing heterogenized molecular catalysts for HER. This overpotential is 90 mV lower than that of the cobalt analogue, suggesting that the nickel coordination polymer is a more efficient H2-evolving catalyst. Additionally, no decrease in activity is observed for the nickel polymer during the first hour of electrolysis, indicating that it is stable under prolonged electrolysis.