Effect of Multilayer versus Monolayer Dodecanethiol on Selectivity and Pattern Integrity in Area-Selective Atomic Layer Deposition.

Monolayer and multilayer dodecanethiols (DDT) can be assembled onto a copper surface from the vapor phase depending on the initial oxidation state of the copper. The ability of the copper-bound dodecanethiolates to block atomic layer deposition (ALD) and the resulting behavior at the interfaces of Cu/SiO2 patterns during area-selective ALD (AS-ALD) are compared between mono- and multilayers. We show that multilayer DDT is ∼7 times more effective at blocking ZnO ALD from diethylzinc and water than is monolayer DDT. Conversely, monolayer DDT exhibits better performance than does multilayer DDT in blocking of Al2O3 ALD from trimethylaluminum and water. Investigation into interfacial effects at the interface between Cu and SiO2 on Cu/SiO2 patterns reveals both a gap at the SiO2 edges and a pitch size-dependent nucleation delay of ZnO ALD on SiO2 regions of multilayer DDT-coated patterns. In contrast, no impact on ZnO ALD is observed on the SiO2 regions of monolayer DDT-coated patterns. We also show that these interfacial effects depend on the ALD chemistry. Whereas an Al2O3 film grows on the TaN diffusion barrier of a DDT-treated Cu/SiO2 pattern, the ZnO film does not. These results indicate that the structure of the DDT layer and the ALD precursor chemistry both play an important role in achieving AS-ALD.

CMOS-Compatible Catalyst for MacEtch: Titanium Nitride-Assisted Chemical Etching in Vapor phase for High Aspect Ratio Silicon Nanostructures.

Metal-assisted chemical etching (MacEtch) is an emerging anisotropic chemical etching technique that has been used to fabricate high aspect ratio semiconductor micro- and nanostructures. Despite its advantages in unparalleled anisotropy, simplicity, versatility, and damage-free nature, the adaptation of MacEtch for silicon (Si)-based electronic device fabrication process is hindered by the use of a gold (Au)-based metal catalyst, as Au is a detrimental deep-level impurity in Si. In this report, for the first time, we demonstrate CMOS-compatible titanium nitride (TiN)-based MacEtch of Si by establishing a true vapor-phase (VP) MacEtch approach in order to overcome TiN-MacEtch-specific challenges. Whereas inverse-MacEtch is observed using conventional liquid phase MacEtch because of the limited mass transport from the strong adhesion between TiN and Si, the true VP etch leads to forward MacEtch and produces Si nanowire arrays by engraving the TiN mesh pattern in Si. The etch rate as a function of etch temperature, solution concentration, TiN dimension, and thickness is systematically characterized to uncover the underlying nature of MacEtching using this new catalyst. VP MacEtch represents a significant step toward scalability of this disruptive technology because of the high controllability of gas phase reaction dynamics. TiN-MacEtch may also have direct implications in embedded TiN-based plasmonic semiconductor structures for photonic applications.