RESUMEN
Herein we report the construction of an inherently chiral carbon nanoring, cyclo[7]paraphenylene-2,9-rubicene ([7]CPPRu2,9), by combining rubicene with a C-shaped synthon through the Suzuki-Miyaura coupling reaction. The structure was fully confirmed by high-resolution mass spectroscopies (HR-MS) and various NMR techniques. The photophysical properties were investigated by UV-vis absorption and fluorescence spectroscopy as well as the time-resolved fluorescence decay. Moreover, two enantiomers (M)/(P)-[7]CPPRu2,9 were successfully resolved by recyclable HPLC and studied by CD and CPL spectra.
RESUMEN
Herein, we report the synthesis of a novel intramolecular donor-acceptor (D-A) system ([12]CPP-8TPAOMe) based on cycloparaphenylenes (CPPs) grafted with eight di(4-methoxyphenyl)amino groups (TPAOMe) as donors. Compared to [12]CPP, D-A nanohoop exhibited significant changes in physical properties, including a large redshift (>78â nm) in the fluorescence spectrum and novel positive solvatofluorochromic properties with a maximum peak ranging from 484â nm to 546â nm. The potential applications of [12]CPP-8TPAOMe in electron- and hole-transport devices were further investigated, and its bipolar behavior as a charge transport active layer was clearly observed.
RESUMEN
Chirality, a fundamental principle in chemistry, biology, and medicine, is prevalent in nature and in organisms. Chiral molecules, such as DNA, RNA, and proteins, are crucial in biomolecular synthesis, as well as in the development of functional materials. Among these, 1,1'-binaphthyl-2,2'-diol (BINOL) stands out for its stable chiral configuration, versatile functionality, and commercial availability. BINOL is widely employed in asymmetric catalysis and chiral materials. This review mainly focuses on recent research over the past five years concerning the use of BINOL derivatives for constructing chiral macrocycles and cages. Their contributions to chiral luminescence, enantiomeric separation, transmembrane transport, and asymmetric catalysis were examined.
RESUMEN
Phosphorene and fullerene are representative two-dimensional (2D) and zero-dimensional (0D) nanomaterials respectively, constructing their heterodimensional hybrid not only complements their physiochemical properties but also extends their applications via synergistic interactions. This is however challenging because of their diversities in dimension and chemical reactivity, and theoretical studies predicted that it is improbable to directly bond C60 onto the surface of phosphorene due to their strong repulsion. Here, we develop a facile electrosynthesis method to synthesize the first phosphorene-fullerene hybrid featuring fullerene surface bonding via P-C bonds. Few-layer black phosphorus nanosheets (BPNSs) obtained from electrochemical exfoliation react with C60 2- dianion prepared by electroreduction of C60, fulfilling formation of the "improbable" phosphorene-fullerene hybrid (BPNS-s-C60). Theoretical results reveal that the energy barrier for formation of [BPNS-s-C60]2- intermediate is significantly decreased by 1.88â eV, followed by an oxidization reaction to generate neutral BPNS-s-C60 hybrid. Surface bonding of C60 molecules not only improves significantly the ambient stability of BPNSs, but also boosts dramatically the visible light and near-infrared (NIR) photocatalytic hydrogen evolution rates, reaching 1466 and 1039â µmol h-1 g-1 respectively, which are both the highest values among all reported BP-based metal-free photocatalysts.
RESUMEN
A few-layer fullerene network possesses several advantageous characteristics, including a large surface area, abundant active sites, high charge mobility, and an appropriate band gap and band edge for solar water splitting. Herein, we report for the first time that the few-layer fullerene network shows interesting photocatalytic performance in pure water splitting into H2 and H2 O2 in the absence of any sacrificial reagents. Under optimal conditions, the H2 and H2 O2 evolution rates can reach 91 and 116â µmol g-1 h-1 , respectively, with good stability. This work demonstrates the novel application of the few-layer fullerene network in the field of energy conversion.
RESUMEN
ConspectusDesigning and synthesizing topologically unique molecules is a long-term challenge for synthetic chemists. Classical polycyclic aromatic hydrocarbons (PAHs) are a large group of π-conjugated planar organic compounds with rich photophysical and electronic properties, while nonplanar/curved PAHs have different molecular orbital arrangements and demonstrate unique properties. The chemistry of curved aromatic molecules has been of significant interest to explore the relationship between π conjugation and molecular geometry, which offers an attractive combination of fundamental problems, potential applications, and aesthetic appeal. Remarkable advances have been made in the last few decades during the discovery of novel curved aromatic molecules, including corannulenes, fullerenes, and carbon nanotubes (CNTs). Especially, there has been increasing interest in making single-chirality CNTs and their curved molecular components (known as finite segments of CNTs) with a fixed geometry. The most representative examples of such organic molecules are cycloparaphenylenes (CPPs) and related carbon nanorings, which possess cylindrical topologies and nanoscale conjugated segments similar to CNTs. CPPs, as the shortest cross-section and the simplest structure of armchair CNTs, have been synthetically accessible since 2008. Recent years have witnessed breakthroughs and rapid development in the synthesis of CPP-based nanorings as well as their derived molecules. In these molecules, the distortion from aromatic planarity can induce radially oriented π systems and further affect their electronic, optical, self-assembly, and charge-transport characteristics. These unique and interesting carbon nanorings are potentially useful in a variety of optoelectronic and biomedical materials. It is well-known that extension of the π-conjugated system facilitates the delocalization of π electrons and the redistribution of electronic clouds, leading to rich diversification of physical properties in the fields of electronics, optics, and supramolecular chemistry. Therefore, the precise design and controllable synthesis of carbon nanorings with large π conjugation will promote important advances in synthetic chemistry. To date, a number of π-extended carbon nanorings have been reported, and they exhibit novel physicochemical properties resulting from their fascinating topologies and structures. However, challenges still remain in the synthesis of π-extended carbon nanorings and their structural analogues and exploration of their unique properties.In this Account, we give a brief overview of our efforts to synthesize large π-extended carbon nanorings using different strategies and explore their novel applications. In 2013 we started our research on the synthesis of carbon nanorings with large π-conjugated structures. This research project has led to (i) the successful preparation of a series of carbon nanorings with inserted PAHs, especially with various nanographenes inserted, such as hexa-peri-hexabenzocoronene; (ii) the design and synthesis of a series of carbon nanorings consisting solely of PAHs; and (iii) the initial synthesis of π-extended carbon-nanoring-based polymers as the long polymeric segments of CNTs, in which macrocyclic CPPs as the basic repeating blocks were covalently coupled together. Herein we describe in detail how these challenging π-extended carbon nanorings were synthesized, and their interesting physical properties are discussed.
RESUMEN
Distorting linear polyaromatic hydrocarbons (PAHs) out of planarity affects their physical properties and breaks their symmetry to induce inherent chirality. However, the chirality cannot be achieved in large distorted PAHs-based macrocycles due to a low racemization barrier for isomerization. Herein, we report the precise synthesis and tuning size-dependent (chir)optical properties of a new class of chiral PAHs-containing conjugated macrocycles (cyclo[n]paraphenylene-2,6-anthrylene, [n]CPPAn2,6 ; n=6-8). Their inherent chiralities were squeezed out in small anthrylene-based macrocycles. Efficient resolutions for chiral enantiomers with (P)/(M)-helicity of small [6-7]CPPAns were achieved by HPLC. Interestingly, these macrocycles showed enriched size-dependent physical, chiral, and (chir)optical properties. Theoretical calculations indicate that these macrocycles have high strain energy (Estrain =60.8 to 73.4â kcal/mol) and very small Egap (â¼3.0â eV). Notably, these enantiomers showed strong chiroptical properties and dissymmetry factors (|gabs | and |glum |â¼0.01 for an enantiomer of [6]CPPAn2,6 ), which can give them potential applications in optically active materials.
RESUMEN
Herein, we report the synthesis, characterization, and photophysical properties of the crown-like structure of [3]cyclo-1,8-pyrenes (compounds 9 and 10). Planar pyrenyl arylene-ethynylene macrocycles are used as the precursors to synthesize these pyrene-based cycloarenes by [4 + 2] cycloaddition reaction with good yields. These molecules are confirmed by nuclear magnetic resonance spectroscopy and high-resolution mass spectrometry. The structure of 9 was unambiguously determined by single-crystal X-ray diffraction. Their photophysical properties are investigated by steady-state absorption, fluorescence, and time-resolved fluorescence spectroscopies, combined with theoretical calculations.
RESUMEN
Herein, we report the precise synthesis of a 3D highly strained all-phenylene bismacrocycle, termed conjoined (1,4)[10]cycloparaphenylenophane (SCPP[10]). This structure consists of a twisted benzene ring which is bridged twice by phenylene units anchored in two para-positions. The conjoined structure of SCPP[10] was confirmed in real space at the atomic scale by scanning tunneling microscopy. Theoretical calculations indicate that this bismacrocycle has a very high strain energy of 110.59â kcal mol-1 and the largest interphenylene torsion angle of 46.07° caused by multiple repulsive interactions. Furthermore, a 1:2 host-guest complex of SCPP[10] and [6,6]-phenyl-C61 -butyric acid methyl ester was investigated, which represents the first peanut-shaped 1:2 host-guest complex based on bismacrocycles.
RESUMEN
Bottom-up synthesis of π-extended macrocyclic carbon rings is promising for constructing length- and diameter-specific carbon nanotubes (CNTs). However, it is still a great challenge to realize size-controllable giant carbon macrocycles. Herein, a tunable synthesis of curved nanographene-based giant π-extended macrocyclic rings (CHBC[n]s; n=8, 6, 4), as finite models of armchair CNTs, is reported. Among them, CHBC[8] contains 336 all-carbon atoms and is the largest cyclic conjugated molecular CNT segment ever reported. CHBC[n]s were systematically characterized by various spectroscopic methods and applied in photoelectrochemical cells for the first time. This revealed that the proton chemical shifts, fluorescence, and electronic and photoelectrical properties of CHBC[n]s are highly dependent on the macrocycle diameter. The tunable bottom-up synthesis of giant macrocyclic rings could pave the way towards large π-extended diameter- and chirality-specific CNT segments.
RESUMEN
The catalytic decomposition of formic acid to generate syngas (a mixture of H2 and CO) is a highly valuable strategy for energy conversion. Syngas can be used directly in internal combustion engines or can be converted to liquid fuels, meeting future energy challenges in a sustainable manner. Herein, we report the use of homogeneous molecular iron catalysts combined with a CdS nanorods (NRs) semiconductor to construct a highly efficient photocatalytic system for direct conversion of formic acid to syngas at room temperature and atmospheric pressure. Under optimal conditions, the photocatalytic system presents an activity of 150â mmol gcatalyst -1 h-1 towards H2 , and an apparent quantum yield (AQY) of 16.8 %, making it among the most active noble-metal-free photocatalytic systems for H2 evolution from formic acid under visible light. Meanwhile, these iron-based molecular catalysts also demonstrate remarkable enhancement in CO evolution with robust stability. The mechanistic role of the molecular catalyst is further investigated by using cyclic voltammetry, which suggests the formation of FeI species as the key step in the catalytic conversion of formic acid to syngas.
RESUMEN
Carbon nanotubes (CNTs) have unusual physical properties that are valuable for nanotechnology and electronics, but the chemical synthesis of chirality- and diameter-specific CNTs and π-conjugated CNT segments is still a great challenge. Reported here are the selective syntheses, isolations, characterizations, and photophysical properties of two novel chiral conjugated macrocycles ([4]cyclo-2,6-anthracene; [4]CAn2,6 ), as (-)/(+)-(12,4) carbon nanotube segments. These conjugated macrocyclic molecules were obtained using a bottom-up assembly approach and subsequent reductive elimination reaction. The hoop-shaped molecules can be directly viewed by a STM technique. In addition, chiral enantiomers with (-)/(+)â helicity of the [4]CAn2,6 were successfully isolated by HPLC. The new tubular CNT segments exhibit large absorption and photoluminescence redshifts compared to the monomer unit. The carbon enantiomers are also observed to show strong circularly polarized luminescence (glum ≈0.1). The results reported here expand the scope of materials design for bottom-up synthesis of chiral macrocycles and enrich existing knowledge of their optoelectronic properties.
RESUMEN
Conjugated polymers have attracted much attention for many years and have applications in various organic devices. Carbon nanotubes can be considered as all-carbon tube-shaped conjugated polymers containing only sp2-bonded atoms, which play an important role in nanotechnology and nanoelectronics. So far, no study has reported the realization of long π-conjugated polymers as diameter-specified carbon nanotube segments. Herein, we report the first synthesis of a π-conjugated polymeric segment (PS1) of armchair single-walled carbon nanotubes (SWCNTs). PS1 is achieved by a rationally designed synthesis of a bifunctionalized cyclo-para-phenylene monomer, followed by inserting these ring-shaped units into the conjugated poly(para-phenylene) backbone. PS1 was fully characterized by gel permeation chromatography (GPC) combined with NMR, FTIR, and Raman spectra. Possessing unique structural and physical properties, this long π-extended polymer PS1 can provide new insight for the development of bottom-up syntheses of uniform carbon nanotube segments and potential applications in electron- and hole-transport devices.
RESUMEN
On-surface synthesis of high-quality nanoporous graphene (NPG) for application in nanotechnology and nanodevices remains challenging. Rational design of molecular precursors and proper kinetic control over the reaction process are the two key factors to tune the synthesis. Herein, we report a detailed study of the coupling reactions of a planar halogen-substituted nanographene molecular precursor, hexaiodo-peri-hexabenzocoronene (I6 -HBC), on the Au(111) surface in the synthesis of NPG. The influence of three basic kinetic processes - molecular adsorption, migration, and coupling - on the synthesis was investigated. The results show that the HBC molecules deposited at low temperature predominantly desorb from the Au(111) surface during the annealing process, whereas depositing the precursor molecules onto a hot surface (700â K) can lead to the formation of NPG. However, at such a high surface temperature, simultaneous intermolecular dehydrogenative coupling between HBC monomers can hinder the ordered growth of NPG through Ullmann coupling. Moreover, the deposition rate of the precursors greatly influences the growth morphology of the NPG nanostructures.
RESUMEN
This study presents synthesis and characterizations of two novel curved nanographenes that strongly bind with fullerene C60 to form photoconductive heterojunctions. Films of the self-assembled curved nanographene/fullerene complexes, which served as the photoconductive layer, generated a significant photocurrent under light irradiation. Gram-scale quantities of these curved nanographenes (TCR and HCR) as the "crown" sidewalls can be incorporated into a carbon nanoring to form molecular crowns, and the molecular structure of C60 @TCR is determined by single-crystal X-ray diffraction. The UV/Vis absorption and emission spectra, and theoretical studies revealed their unique structural features and photophysical properties. Time-resolved spectroscopic results clearly suggest fast photoinduced electron transfer process in the supramolecular heterojunctions.
RESUMEN
Two-dimensional (2D) black phosphorus (BP) has a unique band structure, but it suffers from low ambient stability owing to its high reactivity to oxygen. Covalent functionalization has been demonstrated to passivate the reactive BP effectively, however the reported covalent functionalization methods are quite limited to aryl diazonium and nucleophilic additions affording P-C and P-O-C single bonds, for which the retaining of one unpaired electron in the Groupâ 15 phosphorus atom hampers the passivation effect. Now, covalent azide functionalization of BP nanosheets (BPNSs) is reported, leading to significant enhancement of the ambient stability of BP as confirmed by UV/Vis spectroscopic studies. The most stable configuration of the azide functionalized BPNSs (f-BPNSs) is predicted by theoretical calculations, featuring the grafting of benzoic acid moiety onto BPNSs via the unprecedented P=N double bonds formed through inâ situ nitrene as a reactive intermediate.
RESUMEN
It has been anticipated that learning from nature photosynthesis is a rational and effective way to develop artificial photosynthesis system, but it is still a great challenge. Here, we assembled a photoelectrocatalytic system by mimicking the functions of photosystem II (PSII) with BiVO4 semiconductor as a light harvester protected by a layered double hydroxide (NiFeLDH) as a hole storage layer, a partially oxidized graphene (pGO) as biomimetic tyrosine for charge transfer, and molecular Co cubane as oxygen evolution complex. The integrated system exhibited an unprecedentedly low onset potential (0.17 V) and a high photocurrent (4.45 mA cm-2), with a 2.0% solar to hydrogen efficiency. Spectroscopic studies revealed that this photoelectrocatalytic system exhibited superiority in charge separation and transfer by benefiting from mimicking the key functions of PSII. The success of the biomimetic strategy opened up new ways for the rational design and assembly of artificial photosynthesis systems for efficient solar-to-fuel conversion.
Asunto(s)
Materiales Biomiméticos/química , Bismuto/química , Complejo de Proteína del Fotosistema II/química , Semiconductores , Vanadatos/química , Agua/química , Biomimética , Catálisis , Grafito/química , Hidrógeno/química , Luz , Oxidación-Reducción , Oxígeno/química , Fotosíntesis , Energía SolarRESUMEN
Exfoliated black phosphorus (BP), as a monolayer or few-layer material, has attracted tremendous attention owing to its unique physical properties for applications ranging from optoelectronics to photocatalytic hydrogen production. Approaching intrinsic properties has been, however, challenged by chemical reactions and structure degradation of BP under ambient conditions. Surface passivation by capping agents has been proposed to extend the processing time window, yet contamination or structure damage rise challenges for BP applications. Here, we report experiments combined with first-principle calculations that address the degradation chemistry of BP. Our results show that BP reacts with oxygen in water even without light illumination. The reaction follows a pseudo-first-order parallel reaction kinetics, produces PO23-, PO33-, and PO43- with reaction rate constants of 0.019, 0.034, and 0.023 per day, respectively, and occurs preferentially from the P atoms locating at BP edges, which yields structural decay from the nanoflake edges in water. In addition, a negligible decay ratio (0.9 ± 0.3 mol %) and preserved photocatalytic activity of BP are observed after storage in deoxygenated water for 15 days without surface passivation under ambient light. Our results reveal the chemistry of BP degradation and provide a practical approach for exfoliation, delivery, and application of BP.
RESUMEN
Herein we report the synthesis and photophysical and supramolecular properties of a novel three-dimensional capsule-like hexa-peri-hexabenzocoronene (HBC)-containing carbon nanocage, tripodal-[2]HBC, which is the first synthetic model of capped zigzag [12,0] carbon nanotubes (CNTs). Tripodal-[2]HBC was synthesized by the palladium-catalyzed coupling of triboryl hexabenzocoronene and L-shaped cyclohexane units, followed by nickel-mediated C-Br/C-Br coupling and subsequent aromatization of the cyclohexane moieties. The physical properties of tripodal-[2]HBC and its supramolecular host-guest interaction with C70 were further studied by UV/Vis and fluorescence spectroscopy. Theoretical calculations revealed that the strain energy of tripodal-[2]HBC was as high as 55.2â kcal mol-1 .
RESUMEN
A new kind of multitetrahedron sheath ternary ZnS-(CdS/Au) hetero-nanorod is prepared, in which one 1D ultrathin ZnS nanorod is integrated with segmented tetrahedron sheaths made of CdS, and more importantly, Au nanoparticles can be decorated in a targeted manner onto the vertexes and edges of CdS tetrahedron sheaths solely, for achieving performance improvement in photoelectric and photochemical conversion applications.