Time delay measurement in the frequency domain.

Pump-probe studies at synchrotrons using X-ray and laser pulses require accurate determination of the time delay between pulses. This becomes especially important when observing ultrafast responses with lifetimes approaching or even less than the X-ray pulse duration (∼100 ps). The standard approach of inspecting the time response of a detector sensitive to both types of pulses can have limitations due to dissimilar pulse profiles and other experimental factors. Here, a simple alternative is presented, where the frequency response of the detector is monitored versus time delay. Measurements readily demonstrate a time resolution of ∼1 ps. Improved precision is possible by simply extending the data acquisition time.

Intermolecular dynamics in crystalline iron octaethylporphyrin (FeOEP).

The new technique of nuclear resonance vibrational spectroscopy (NRVS) has increased the range and quality of dynamical data from Fe-containing molecules that when combined with Raman and infrared spectroscopies impose stricter constraints on normal mode simulations, especially at lower frequencies. Going beyond the usual single molecule approximation, a classical normal-mode analysis that includes intermolecular coupling and the full crystalline symmetry is found to produce a better fit with fewer free parameters for the heme compound iron octaethylporphyrin (FeOEP), using NRVS data from polycrystalline material. Off-diagonal force constants were completely unnecessary, indicating that their role in previous single molecule fits was just to emulate intermolecular coupling. Sound velocities deduced from the calculated phonon dispersion curves are compared to NRVS measurements to further constrain the intermolecular force constants. The NRVS data by themselves are insufficient to rigorously determine all unknown force constants for molecules of this size, but the improved crystal model fit indicates the necessity of including intermolecular interactions for normal-mode analyses.

Enhanced fibronectin adsorption on carbon nanotube/poly(carbonate) urethane: independent role of surface nano-roughness and associated surface energy.

The contribution of nanoscale surface roughness on the adsorption of one key cell adhesive protein, fibronectin, on carbon nanotube/poly(carbonate) urethane composites of different surface energies was evaluated. Systematic control of various surface energies by creating different nanosurface roughness features was performed by mixing two promising biomaterials: multi-wall carbon nanotubes and poly(carbonate) urethane. High ratios of carbon nanotubes coated with poly(carbonate) urethane provided for greater hydrophilic surfaces because of higher nanosurface roughness although pure carbon nanotube surfaces were extremely hydrophobic. Fabrication methods followed in this study generated various homogenous nanosurface roughness values (ranging from 2 to 20nm root mean square (RMS) AFM roughness). With the aid of such nanosurface roughness values in composites, a model was developed that linearly correlated nanosurface roughness and associated nanosurface energy to fibronectin adsorption. Specifically, independent contributions of surface chemistry (70%) and surface nano-roughness (30%) were found to mediate fibronectin adsorption. The results of the present study showed why carbon nanotube/poly(carbonate) urethane composites enhance cellular functions and tissue growth by delineating the importance of their physical nano-roughness on promoting the adsorption of a protein well known to be critical for mediating the adhesion of anchorage-dependent cells.

X-ray and optical pulse interactions in GaAs.

Absorption of hard x-rays in GaAs creates excitations that can dramatically alter the propagation of optical laser pulses with photon energies near the bandgap. Measurements of optical transmission through a thin crystalline wafer of GaAs after absorption of an intense x-ray synchrotron pulse demonstrate how x-ray induced optical transparency depends on the recombination of excited conduction band electrons and valence band holes via Auger, spontaneous emission, and especially stimulated emission processes. The x-ray induced band fluorescence spectrum also reveals amplified spontaneous emission at the high x-ray fluences used, confirming the importance of stimulated emission. For laser pulses with sufficiently high fluence, the interaction of optically excited electrons with x-ray excited electrons can quench the enhanced laser transmission.

Hydration-induced far-infrared absorption increase in myoglobin.

The interaction of proteins with an aqueous environment leads to a thin region of "biological water", the molecules of which have properties that differ from those of bulk water, in particular, reduced absorption of far-infrared radiation caused by protein-induced hindrance of the water rotational and vibrational degrees of freedom. New results at terahertz (THz) frequencies, however, show that absorption per protein molecule is increased by the presence of biological water. Absorption measurements were made of the heme protein myoglobin mixed with water from 3.6 to 98 wt % in the frequency range of 0.1-1.2 THz, using THz time-domain spectroscopy. Analysis shows greater THz absorption when compared to a non-interacting protein-water model. Including the suppressed absorption of biological water leads to a substantial hydration-dependent increase in absorption per protein molecule over a wide range of concentration and frequencies, meaning that water increases the protein's polarizability.

Vibrational spectroscopy and normal-mode analysis of Fe(II) octaethylporphyrin.

The normal-mode spectrum for the four-coordinated heme compound Fe(II) octaethylporphyrin, Fe(OEP), has been determined by refining force constants to the experimental Fe vibrational density of states measured with nuclear resonance vibrational spectroscopy (NRVS). Convergence of the calculated spectrum to the data was achieved by first imposing D4 symmetry on the model structure as well as the force constants, progressively including different internal coordinates of motion, then allowing the true Ci (or S2) point group symmetry of the C(i)1 Fe(OEP) crystal structure. The NRVS-refined normal modes are in good agreement with Raman and IR spectra at high frequencies. Prior density functional theory predictions for a model porphyrin are similar to the core modes computed with the best-fit force field, but significant differences between D4 and Ci modes underline the sensitivity of porphyrin Fe normal modes to structural details. Some differences between the Ci best fit and the NRVS data can be attributed to intermolecular contacts not included in the normal-mode analysis.

Fe vibrational spectroscopy of myoglobin and cytochrome f.

The Fe vibrational density of states (VDOS) has been determined for the heme proteins deoxymyoglobin, metmyoglobin, and cytochrome f in the oxidized and reduced states, using nuclear resonance vibrational spectroscopy (NRVS). For cytochrome f in particular, the NRVS spectrum is compared with multiwavelength resonance Raman spectra to identify those Raman modes with significant Fe displacement. Modes not seen by Raman due to optical selection rules appear in the NRVS spectrum. The mean Fe force constant extracted from the VDOS illustrates how Fe dynamics varies among these four monoheme proteins, and is correlated with oxidation and spin state trends seen in model heme compounds. The protein's contribution to Fe motion is dominant at low frequencies, where coupling to the backbone tightly constrains Fe displacements in cytochrome f, in contrast to enhanced heme flexibility in myoglobin.

Variable Magnification With Kirkpatrick-Baez Optics for Synchrotron X-Ray Microscopy.

We describe the distinction between the operation of a short focal length x-ray microscope forming a real image with a laboratory source (convergent illumination) and with a highly collimated intense beam from a synchrotron light source (Köhler illumination). We demonstrate the distinction with a Kirkpatrick-Baez microscope consisting of short focal length multilayer mirrors operating at an energy of 8 keV. In addition to realizing improvements in the resolution of the optics, the synchrotron radiation microscope is not limited to the usual single magnification at a fixed image plane. Higher magnification images are produced by projection in the limit of geometrical optics with a collimated beam. However, in distinction to the common method of placing the sample behind the optical source of a diverging beam, we describe the situation in which the sample is located in the collimated beam before the optical element. The ultimate limits of this magnification result from diffraction by the specimen and are determined by the sample position relative to the focal point of the optic. We present criteria by which the diffraction is minimized.

Single-atom test of all-atom empirical potentials: Fe in myoglobin.

The measured Fe vibrational density of states in deoxy-myoglobin, obtained from nuclear resonance vibrational spectroscopy, is compared to results from a normal-mode analysis using an all-atom empirical potential. Substantial disagreement reveals that for this one atom, the empirical potential does not accurately describe the actual forces. A Green function technique is developed to calculate the iron vibrational spectrum of deoxy-myoglobin by coupling the independently calculated heme and globin normal modes; nonbonded interactions between the heme molecule and the protein are essential for a good fit to the measurements. A projection of the eigenvectors from this potential onto the displacements induced by binding of CO demonstrates that normal modes over a broad range centered around 50-150 cm(-1) may drive the ligand-induced structural changes.

Nuclear resonance vibrational spectroscopy--NRVS.

The recent, synchrotron-based vibrational technique nuclear resonance vibrational spectroscopy (NRVS) is introduced. The method can be used for a number of Mössbauer active isotopes including 57Fe, which has yielded most of the results to date. The NRVS experiment can be thought of as Mössbauer spectroscopy with vibrational sidebands. Importantly, the NRVS experiment provides the complete set of bands corresponding to modes that involve motion of the iron atom. The method has a selectivity reminiscent of that of resonance Raman spectroscopy, but with the significant advantage that NRVS is not subject to the optical selection rules of Raman or infrared spectroscopy. Indeed, NRVS provides the ultimate limit in selectivity because only the vibrational dynamics of the probe nucleus contribute to the observed signal. All iron-ligand modes will be observed, including many that had not been previously observed. For hemes, these include in-plane iron vibrations that have not yet been reported by resonance Raman studies and the iron-imidazole stretch that has not been identified in six-coordinate porphyrins. Other modes that can be investigated include that of heme doming that is expected to be a low-frequency mode. The experimental setup at a beam line and sample requirements for iron-based derivatives are presented. Both powder and polarized single-crystal measurements can be made. The general features of data extraction and analysis are given. Data for heme and heme proteins are given. Examples of assignment of spectra for nitrosyl and carbonyl derivatives are given. These data demonstrate the importance of peripheral substituents on the vibrational spectrum of heme derivatives. Delocalization of modes appears to be common. Although this technique has only been available for a relatively short time, this early progress report indicates that NRVS has significant potential for probing the dynamics of Fe-containing molecules of biological interest.

Vibrational Dynamics of Biological Molecules: Multi-quantum Contributions.

High-resolution X-ray measurements near a nuclear resonance reveal the complete vibrational spectrum of the probe nucleus. Because of this, nuclear resonance vibrational spectroscopy (NRVS) is a uniquely quantitative probe of the vibrational dynamics of reactive iron sites in proteins and other complex molecules. Our measurements of vibrational fundamentals have revealed both frequencies and amplitudes of (57)Fe vibrations in proteins and model compounds. Information on the direction of Fe motion has also been obtained from measurements on oriented single crystals, and provides an essential test of normal mode predictions. Here, we report the observation of weaker two-quantum vibrational excitations (overtones and combinations) for compounds that mimic the active site of heme proteins. The predicted intensities depend strongly on the direction of Fe motion. We compare the observed features with predictions based on the observed fundamentals, using information on the direction of Fe motion obtained either from DFT predictions or from single crystal measurements. Two-quantum excitations may become a useful tool to identify the directions of the Fe oscillations when single crystals are not available.

Iron normal mode dynamics in a porphyrin-imidazole model for deoxyheme proteins.

Iron vibrational modes of a deoxyheme protein model (2-methylimidazole)(tetraphenylporphinato)iron(II), [Fe(TPP)(2-MeImH)], have been studied by refining normal mode calculations to nuclear resonance vibrational spectroscopy (NRVS) data. The NRVS measurements give quantitative frequencies and iron amplitudes of all modes with significant Fe vibrational motion. Modes with in-plane displacement of iron are distinguished from those involving out-of-plane motion by measurements on oriented single-crystal samples. Normal modes having large overlaps with in-plane nu(42), nu(50), and nu(53) modes of the porphyrin core are identified, as well as several modes with large iron-imidazole stretch components. An out-of-plane mode at 78 cm(-1) shows significant doming of the porphyrin core, but the largest Fe doming motion arises from the coupling of phenyls and imidazole at 25 cm(-1).

Direct determination of the complete set of iron normal modes in a porphyrin-imidazole model for carbonmonoxy-heme proteins: [Fe(TPP)(CO)(1-MeIm)].

Detailed Fe vibrational spectra have been obtained for the heme model complex [Fe(TPP)(CO)(1-MeIm)] using a new, highly selective and quantitative technique, Nuclear Resonance Vibrational Spectroscopy (NRVS). This spectroscopy measures the complete vibrational density of states for iron atoms, from which normal modes can be calculated via refinement of the force constants. These data and mode assignments can reveal previously undetected vibrations and are useful for validating predictions based on optical spectroscopies and density functional theory, for example. Vibrational modes of the iron porphyrin-imidazole compound [Fe(TPP)(CO)(1-MeIm)] have been determined by refining normal mode calculations to NRVS data obtained at an X-ray synchrotron source. Iron dynamics of this compound, which serves as a useful model for the active site in the six-coordinate heme protein, carbonmonoxy-myoglobin, are discussed in relation to recently determined dynamics of a five-coordinate deoxy-myoglobin model, [Fe(TPP)(2-MeHIm)]. For the first time in a six-coordinate heme system, the iron-imidazole stretch mode has been observed, at 226 cm(-)(1). The heme in-plane modes with large contributions from the nu(42), nu(49), nu(50), and nu(53) modes of the core porphyrin are identified. In general, the iron modes can be attributed to coupling with the porphyrin core, the CO ligand, the imidazole ring, and/or the phenyl rings. Other significant findings are the observation that the porphyrin ring peripheral substituents are strongly coupled to the iron doming mode and that the Fe-C-O tilting and bending modes are related by a negative interaction force constant.

Quantitative vibrational dynamics of iron in nitrosyl porphyrins.

We use quantitative experimental and theoretical approaches to characterize the vibrational dynamics of the Fe atom in porphyrins designed to model heme protein active sites. Nuclear resonance vibrational spectroscopy (NRVS) yields frequencies, amplitudes, and directions for 57Fe vibrations in a series of ferrous nitrosyl porphyrins, which provide a benchmark for evaluation of quantum chemical vibrational calculations. Detailed normal mode predictions result from DFT calculations on ferrous nitrosyl tetraphenylporphyrin Fe(TPP)(NO), its cation [Fe(TPP)(NO)]+, and ferrous nitrosyl porphine Fe(P)(NO). Differing functionals lead to significant variability in the predicted Fe-NO bond length and frequency for Fe(TPP)(NO). Otherwise, quantitative comparison of calculated and measured Fe dynamics on an absolute scale reveals good overall agreement, suggesting that DFT calculations provide a reliable guide to the character of observed Fe vibrational modes. These include a series of modes involving Fe motion in the plane of the porphyrin, which are rarely identified using infrared and Raman spectroscopies. The NO binding geometry breaks the four-fold symmetry of the Fe environment, and the resulting frequency splittings of the in-plane modes predicted for Fe(TPP)(NO) agree with observations. In contrast to expectations of a simple three-body model, mode energy remains localized on the FeNO fragment for only two modes, an N-O stretch and a mode with mixed Fe-NO stretch and FeNO bend character. Bending of the FeNO unit also contributes to several of the in-plane modes, but no primary FeNO bending mode is identified for Fe(TPP)(NO). Vibrations associated with hindered rotation of the NO and heme doming are predicted at low frequencies, where Fe motion perpendicular to the heme is identified experimentally at 73 and 128 cm-1. Identification of the latter two modes is a crucial first step toward quantifying the reactive energetics of Fe porphyrins and heme proteins.

Iron normal mode dynamics in (nitrosyl)iron(II)tetraphenylporphyrin from X-ray nuclear resonance data.

The complete iron atom vibrational spectrum has been obtained by refinement of normal mode calculations to nuclear inelastic x-ray absorption data from (nitrosyl)iron(II)tetraphenylporphyrin, FeTPP(NO), a useful model for heme dynamics in myoglobin and other heme proteins. Nuclear resonance vibrational spectroscopy (NRVS) provides a direct measurement of the frequency and iron amplitude for all normal modes involving significant displacement of (57)Fe. The NRVS measurements on isotopically enriched single crystals permit determination of heme in-plane and out-of-plane modes. Excellent agreement between the calculated and experimental values of frequency and iron amplitude for each mode is achieved by a force-field refinement. Significantly, we find that the presence of the phenyl groups and the NO ligand leads to substantial mixing of the porphyrin core modes. This first picture of the entire iron vibrational density of states for a porphyrin compound provides an improved model for the role of iron atom dynamics in the biological functioning of heme proteins.