Reference Standards to Support Quality of Synthetic Peptide Therapeutics.

PURPOSE: Peptides are an important class of therapeutics. Their quality is evaluated using a series of analytical tests, many of which depend on well-characterized reference standards to determine identity, purity, and strength. OBJECTIVE: Discuss approaches to producing peptide reference standards, including vialing, lyophilization, analytical testing and stability studies. METHODS: Case studies are used to illustrate analytical approaches to characterize reference standards, including methods for value assignment, content uniformity, and identity testing. Methods described include NMR, mass spectrometry, and chromatography techniques for identity testing and HPLC and GC methods for assessing peptide content and impurities. RESULTS: This report describes the analytical strategy used to establish peptide reference standard and illustrates how results from multiple labs are integrated to assign a value to the final lyophilized vial. A two-step process for value assignment is described, which uses a mass balance approach to assign a quantitative value to a bulk peptide material. The bulk material is then used as a standard to assign a final value to the vialed material. Testing to confirm peptide identity and to ensure consistency of the vialed material is also described. Considerations for addressing variability, identifying outliers, and implementing stability studies are also presented. CONCLUSION: The methods and case studies described provide a benchmark for best practices in establishing the preparation, analytical testing, handling, and storage of peptide reference standards for the pharmaceutical industry. Some peptide features, such as chiral or isobaric amino acids, may require additional techniques to ensure a full characterization of the peptide reference standard.

Development of a stable chemically cross-linked erythropoietin dimer for use in the quality control of erythropoietin therapeutic products.

Erythropoietin (EPO) is a glycoprotein hormone which promotes red cell replenishment and is also a global biotherapeutic medicine widely used to treat anaemia resulting, for example, from chemotherapy. Requirements of the European Pharmacopoeia stipulate that the level of dimer must be quantified in clinical EPO products (with a limit of 2%). Quantification is hampered by the lack of reference preparations containing stable measurable levels of EPO dimer, but the reproducible generation of a stable dimerised EPO preparation is challenging. We describe here the development of a lyophilised, chemically cross-linked EPO preparation, which has good stability and may be used for calibration and system suitability assurance for the size exclusion chromatographic separation of EPO preparations. Graphical abstract.

Towards international standardization of immunoassays for Müllerian inhibiting substance/anti-Müllerian hormone.

RESEARCH QUESTION: Is formulated and lyophilized, recombinant human Müllerian inhibiting substance, also known as anti-Müllerian hormone (AMH), suitable for the preparation of a WHO international standard to calibrate AMH immunoassays? DESIGN: The AMH content of a trial preparation, coded SS-581, was determined by five laboratories using seven immunoassay methods. Participants were requested to report the content of the preparation in terms of their method calibrators through the measurement of a minimum of five concentrations in the linear part of the dose-response curve. Participants were also asked to measure, concomitantly, a panel of six serum samples containing AMH at concentrations of 0.1-13.0 ng/ml. RESULTS: Across all assays, including two automated assays in development, the geometric mean content was 361.76 ng/ampoule with a geometric coefficient of variation (GCV%) of 39.95%. When measured by immunoassays that were commercially available at the time of the study, the mean content was 423.08 ng/ampoule, with a GCV% of 26.67%. The inter-method geometric means of five serum samples with an AMH concentration >0.3 ng/ml and measured concomitantly with dilutions of SS-581 varied with a range of GCV% of 14.90-22.35%, which may reflect the use of serum sample value transfer to calibrate current immunoassays, some of which use non-human AMH calibrators. The AMH in trial preparation SS-581 was shown to be biologically active in the Müllerian duct regression assay. CONCLUSIONS: A reference material prepared using human recombinant AMH is a promising candidate for the preparation of an international standard for AMH for immunoassays calibrated to recombinant human AMH.

The importance of formulation in the successful lyophilization of influenza reference materials.

Lyophilized Influenza antigen reference reagents are a critical resource in the quality control of influenza vaccines. A standard formulation has been used successfully at NIBSC for many years however, following the unexpected occurrence of a collapsed appearance in a particular batch a study was carried out to establish the impact of the sugar concentration in the formulation using modulated differential scanning calorimetry (mDSC) and nuclear magnetic resonance spectroscopy (NMR). There was a correlation between the presence and size of the mDSC eutectic temperature events and the freeze dried appearance of the cakes, which became progressively worse with increasing amounts of sugar. NMR spectroscopy could be used to positively identify and quantify the sugars in the formulations. MDSC can rapidly predict if the freeze dried appearance will be acceptable so as to assure the successful lyophilization of influenza reference preparations.

Predicting the Stability of Lyophilized Human Serum Albumin Formulations Containing Sucrose and Trehalose Using Solid-State NMR Spectroscopy: Effect of Storage Temperature on 1H T1 Relaxation Times.

In a lyophilized protein/disaccharide system, the ability of the disaccharide to form a homogeneous mixture with the protein and to slow the protein mobility dictates the stabilization potential of the formulation. Human serum albumin was lyophilized with sucrose or trehalose in histidine, phosphate, or citrate buffer. 1H T1 relaxation times were measured by solid-state NMR spectroscopy and were used to assess the homogeneity and mobility of the samples after zero, six, and twelve months at different temperatures. The mobility of the samples decreased after 6 and 12 months storage at elevated temperatures, consistent with structural relaxation of the amorphous disaccharide matrix. Formulations with sucrose had lower mobility and greater stability than formulations with trehalose.

Convalescent human plasma candidate reference materials protect against Crimean-Congo haemorrhagic fever virus (CCHFV) challenge in an A129 mouse model.

Crimean-Congo Haemorrhagic Fever Virus (CCHFV) is spread by infected ticks or direct contact with blood, tissues and fluids from infected patients or livestock. Infection with CCHFV causes severe haemorrhagic fever in humans which is fatal in up to 83 % of cases. CCHFV is listed as a priority pathogen by the World Health Organization (WHO) and there are currently no widely-approved vaccines. Defining a serological correlate of protection against CCHFV infection would support the development of vaccines by providing a 'target threshold' for pre-clinical and clinical immunogenicity studies to achieve in subjects and potentially obviate the need for in vivo protection studies. We therefore sought to establish titratable protection against CCHFV using pooled human convalescent plasma, in a mouse model. Convalescent plasma collected from seven individuals with a known previous CCHFV virus infection were characterised using binding antibody and neutralisation assays. All plasma recognised nucleoprotein and the Gc glycoprotein, but some had a lower Gn glycoprotein response by ELISA. Pooled plasma and two individual donations from convalescent donors were administered intraperitoneally to A129 mice 24 h prior to intradermal challenge with CCHFV (strain IbAr10200). A partial protective effect was observed with all three convalescent plasmas characterised by longer survival post-challenge and reduced clinical score. These protective responses were titratable. Further characterisation of the serological reactivities within these samples will establish their value as reference materials to support assay harmonisation and accelerate vaccine development for CCHFV.

Investigating Alternative Container Formats for Lyophilization of Biological Materials Using Diphtheria Antitoxin Monoclonal Antibody as a Model Molecule.

When preparing biological reference materials, the stability of the lyophilized product is critical for long-term storage, particularly in order to meet WHO International Standards, which are not assigned expiry dates but are expected to be in use for several decades. Glass ampoules are typically used by the National Institute for Biological Standards and Control (NIBSC) for the lyophilization of biological materials. More recently, a clear need has arisen for the filling of smaller volumes, for which ampoules may not be optimal. We investigated the use of plastic microtubes as an alternative container for small volume fills. In this study, a recombinant diphtheria antitoxin monoclonal antibody (DATMAB) was used as a model molecule to investigate the suitability of plastic microtubes for filling small volumes. The stability and quality of the dried material was assessed after an accelerated degradation study using a toxin neutralization test and size exclusion HPLC. While microtubes have shown some promise in the past for use in the lyophilization of some biological materials, issues with stability may arise when more labile materials are freeze-dried. We demonstrate here that the microtube format is unsuitable for ensuring the stability of this monoclonal antibody.

Vacuum-Induced Surface Freezing for the Freeze-Drying of the Human Growth Hormone: How Does Nucleation Control Affect Protein Stability?

In the present work, the effect of controlled nucleation on the stability of human growth hormone (hGH) during freeze-drying has been investigated. More specifically, the vacuum-induced surface freezing technique has been compared to conventional freezing, both with and without an annealing step. Size exclusion chromatography and cell-based potency assays have been used to characterize the formation of soluble aggregates and the biological activity of hGH, respectively. The results obtained indicate that controlled nucleation has a positive effect on both cycle performance and product homogeneity because of the formation of bigger ice crystals, and characterized by a narrower dimensional distribution. From the point of view of hGH stability, we observed that vacuum-induced surface freezing is not detrimental to the biological activity of the protein, or aggregate formation. In addition, the effect of 2 different formulations, including trehalose or cellobiose, on protein preservation was also considered for this study.

Freeze-drying cycle optimization for the rapid preservation of protein-loaded liposomal formulations.

Technology such as the use of microfluidics to generate liposomes has been well researched, yet the stabilisation of liposomal formulations is a major challenge to their greater implementation. To the best of our knowledge, this is the first study investigating the use of 96 well plates to freeze-dry ovalbumin (OVA) loaded neutral (DMPC:Chol and DSPC:Chol), anionic (DSPC:Chol:PS) and cationic (DSPC:Chol:DOTAP) liposomes. Through the use of high throughput screening, a freeze drying cycle was optimised; ramp freezing from from 4 °C to -45 °C, followed by primary drying at -30 °C and secondary drying at 30 °C under a vacuum of 0.1 mBar. These parameters maintained liposome physicochemical properties, with the liposomes remaining below 100 nm and were homogenous (polydispersity index of less than 0.2 post rehydration). Minimal leakage of the OVA protein was observed, with almost 100% OVA remaining encapsulated post rehydration of the formulations. Here we have identified a simple method that allows for the rapid screening and freeze-drying of a range of liposomal formulations.