Degradation products of resin-based materials detected in saliva in vivo.

OBJECTIVES: Dental composites remain under scrutiny regarding their (long-term) safety. In spite of numerous studies on the release of monomers both in vitro and in vivo, only limited quantitative data exist on the in vivo leaching of degradation products from monomers and additives. The aim of this observational study was for the first time to quantitatively and qualitatively monitor the release of parent compounds and their degradation products in saliva from patients undergoing multiple restorations. MATERIALS AND METHODS: Five patients in need of multiple large composite restorations (minimally 5 up to 28 restorations) due to wear (attrition, abrasion, and erosion) were included in the study, and they received adhesive restorative treatment according to the standard procedures in the university clinic for Restorative Dentistry. Saliva was collected at different time points, starting before the restoration up until 24 h after the treatment with composite restorations. Saliva extracts were analyzed by liquid chromatography-mass spectrometry. RESULTS: Leaching of monomers and degradation products was highest within 30 min after the placement of the restorations. The highest median concentrations of monomers were recorded for UDMA, BisEMA-3, and TEGDMA; yet, besides BisEMA-3 and TEGDMA, no monomers could be detected after 24 h. Mono- and demethacrylated degradation products remained present up to 24 h and concentrations were generally higher than those of monomers. In patients with multiple restorations, degradation products were still present in the sample taken before the next operation, several weeks after the previous operation. CONCLUSIONS: Exposure to residual monomers and degradation products occurs in the first hours after restoration. Monomers are present in saliva shortly after restoration, but degradation products can be detected weeks after the restoration confirming a long-term release. CLINICAL SIGNIFICANCE: Future research should focus more on the release of degradation products from monomers and additives from resin-based materials given their prolonged presence in saliva after restoration.

Revisiting metric sex estimation of burnt human remains via supervised learning using a reference collection of modern identified cremated individuals (Knoxville, USA).

OBJECTIVES: This study aims to increase the rate of correctly sexed calcined individuals from archaeological and forensic contexts. This is achieved by evaluating sexual dimorphism of commonly used and new skeletal elements via uni- and multi-variate metric trait analyses. MATERIALS AND METHODS: Twenty-two skeletal traits were evaluated in 86 individuals from the William M. Bass donated cremated collection of known sex and age-at-death. Four different predictive models, logistic regression, random forest, neural network, and calculation of population specific cut-off points, were used to determine the classification accuracy (CA) of each feature and several combinations thereof. RESULTS: An overall CA of ≥ 80% was obtained for 12 out of 22 features (humerus trochlea max., and lunate length, humerus head vertical diameter, humerus head transverse diameter, radius head max., femur head vertical diameter, patella width, patella thickness, and talus trochlea length) using univariate analysis. Multivariate analysis showed an increase of CA (≥ 95%) for certain combinations and models (e.g., humerus trochlea max. and patella thickness). Our study shows metric sexual dimorphism to be well preserved in calcined human remains, despite the changes that occur during burning. CONCLUSIONS: Our study demonstrated the potential of machine learning approaches, such as neural networks, for multivariate analyses. Using these statistical methods improves the rate of correct sex estimations in calcined human remains and can be applied to highly fragmented unburnt individuals from both archaeological and forensic contexts.

Evaluation of the dioxin-like toxicity in soil samples from Thua Thien Hue province using the AhR-CALUX bioassay - An update of Agent Orange contamination in Vietnam.

In this study, an AhR-responsive reporter-gene cell-based bioassay CALUX was used to assess the biological potency of dioxins and dioxin-like PCBs (dl-PCBs) in top soil samples collected from a former airbase (A-So) and remote regions from urban and agricultural areas in Thua Thien Hue, Vietnam. In top soil collected from A-So airbase, Bioanalytical EQuivalent (BEQ) concentrations of up to 2700 pg 2,3,7,8-tetrachlorodibenzo-p-dioxin (TCDD) per g dry weight (pg BEQ-TCDD g-1 dw) were assessed. Interestingly, while BEQ values for dl-PCBs were found to be up to 13 pg BEQ-TCDD g-1 dw, the dl-PCB activity was not detected in all the hotspot sample extracts. In contrasts, BEQ values for dioxin like compounds from remote regions were much lower and occasionally below the quantification limits of the method. The BEQ activities obtained in this study have a similar trend to the WHO-TEQ results for the samples collected in the A-So airbase. However, BEQ values were higher than those of TEQ, probably reflecting the presence of additional AhR ligands and/or possible non-additive interactions in the sample mixture. This study confirms that after more than 60 years, a strong residual pollution of PCDD/Fs remains on this former air base following the use and storage of Agent Orange during the Vietnam War, raising a health risk for populations exposed in this area because livestock animals graze there.

Estrogenic Activity Measurements in Water Using Diffusive Gradients in Thin-Film Coupled with an Estrogen Bioassay.

A novel type of diffusive gradients in thin-film (DGT) was combined with a chemically activated luciferase gene expression bioassay (CALUX) to measure estrogens in aquatic systems. The performance of this novel method was assessed with 17ß-estradiol (E2) as the model steroid hormone, XAD 18 resin gel as the binding phase in the DGT method and VM7Luc4E2 cells (formerly BG1Luc4E2) for the Estrogen Responsive Element (ERE)-CALUX bioassay. The measured effective diffusion coefficient of E2 in agarose diffusive gel was 4.65 ± 0.37 × 10-6 cm2 s-1 at 25 °C. The detection limit of this combined DGT/ERE-CALUX method for 1 day of sampling (0.026 ± 0.003 ng L-1 of E2) is significantly lower than that obtained by spot sampling combined with GC-MS/MS or LC-MS/MS analysis (0.1-7.0 ng L-1). The method is independent of pH (5-8), ionic strength (0.001-0.5 M), and dissolved organic matter (DOM; concentrations up to 30 mg L-1). Field applications of this novel DGT in effluents of three sewage treatment plants in Beijing city (China) showed comparable results to conventional spot (grab) sampling. This study demonstrates that the combined DGT/ERE-CALUX approach is an effective and sensitive tool for in situ monitoring of estrogenic activity in waters and wastewaters.

Bioaccumulation and public health implications of trace metals in edible tissues of the crustaceans Scylla serrata and Penaeus monodon from the Tanzanian coast.

The coastal population in East Africa is growing rapidly but sewage treatment and recycling facilities in major cities and towns are poorly developed. Since estuarine mangroves are the main hotspots for pollutants, there is a potential for contaminants to accumulate in edible fauna and threaten public health. This study analysed trace metals in muscle tissues of the giant mud crabs (Scylla serrata) and the giant tiger prawns (Penaeus monodon) from the Tanzanian coast, in order to determine the extent of bioaccumulation and public health risks. A total of 180 samples of muscle tissues of S. serrata and 80 of P. monodon were collected from nine sites along the coast. Both species showed high levels of trace metals in the wet season and significant bioaccumulation of As, Cu and Zn. Due to their burrowing and feeding habits, mud crabs were more contaminated compared to tiger prawns sampled from the same sites. Apart from that, the measured levels of Cd, Cr and Pb did not exceed maximum limits for human consumption. Based on the current trend of fish consumption in Tanzania (7.7 kg/person/year), the measured elements (As, Cd, Co, Cu, Mn, Pb and Zn) are not likely to present health risks to shellfish consumers. Nevertheless, potential risks of As and Cu cannot be ruled out if the average per capita consumption is exceeded. This calls for strengthened waste management systems and pollution control measures.

Assessment of estrogenic and androgenic activity in PM10 air samples from an urban, industrial and rural area in Flanders (Belgium) using the CALUX bioassay.

BACKGROUND: Endocrine disrupting chemicals represent a broad class of compounds, are widespread in the environment and can pose severe health effects. OBJECTIVES: The objective of this study was to investigate and compare the overall estrogen and androgen activating potential of PM10 air samples at an urban, rural and industrial location in Flanders, using a human in vitro cell bioassay. METHODS: PM10 samples were collected on glass fiber filters every six days between April 2013 and January 2014 using a high-volume sampler. Extraction was executed with a hexane/acetone mixture before analysis using a recombinant estrogen- or androgen responsive human carcinoma cell line. Results were expressed as bioanalytical equivalents (BEQs) per cubic meter of air. RESULTS: High fluctuations in estrogenic activity were observed during the entire sampling period, with median BEQs of 32.1, 35.9 and 31.1 fg E2-Eq m(-)³ in the industrial, urban and rural background area, respectively. Estrogenic activity was measured in 70% of the samples, while no androgenic activity was observed in any of the samples. The estrogenic activity in the industrial area was positively correlated with the airborne concentration of the sum of the non-carcinogenic PAHs pyrene and fluoranthene (rho=0.48; p<0.01) and the sum of the carcinogenic PAHs (rho=0.36; p=0.05). CONCLUSIONS: This study showed that no androgenic activity was present in PM10 and that although the median estrogenic activity was rather low and comparable in the three locations, high fluctuations in estrogenic response exist over time. While atmospheric PAHs contributed to the observed estrogenic response, especially in the industrial area, the chemicals responsible for the majority of estrogenic activity remain to be identified.

Trace metals in the giant tiger prawn Penaeus monodon and mangrove sediments of the Tanzania coast: Is there a risk to marine fauna and public health?

Mangroves ecosystems support livelihood and economic activities of coastal communities in the tropics and subtropics. Previous reports have documented the inefficiency of waste treatment facilities in Tanzania to contain trace metals. Therefore, the rapidly expanding coastal population and industrial sector is likely to threaten mangrove ecosystems with metal pollution. This study analysed trace metals in 60 sediment samples and 160 giant tiger prawns from the Tanzanian coast in order to document the distribution of trace metals and to establish if measured levels present a threat to mangrove fauna and are of public health importance. High levels of Cr, Co, Cu, Fe, Mn, Ni, and V was observed in mangroves of river Pangani, Wami, and Rufiji. Multivariate analysis showed that they originate mainly from weathering and erosion in the river catchments. Extreme enrichment of Cd was observed in a mangrove affected by municipal sewage. The distribution of Hg, Pb, and Zn was related with urbanisation and industrial activities along the coast. The metal pollution index was high at Pangani, Saadani, and Rufiji, suggesting that these estuarine mangroves are also affected by human activities in the catchment. Moderate to considerable ecological risks were observed in all sampled mangroves, except for Kilwa Masoko. It was revealed that As, Cd, and Hg present moderate risks to fauna. High levels of Cu, Fe and Zn were observed in prawns but the level of the non-essential Cd, Hg, and Pb did not exceed the maximum allowed levels for human consumption. However, based on the trends of fish consumption in the country, weekly intake of Hg is likely to exceed provisional tolerable weekly intake level, especially in fishing communities. This calls for measures to control Hg emissions and to strengthen sewage and waste treatment in coastal cities and urban centres in the basin of major rivers.

Assessment of trace metal pollution in sediments and intertidal fauna at the coast of Cameroon.

Coastal systems act as a boundary between land and sea. Therefore, assessing pollutant concentrations at the coast will provide information on the impact that land-based anthropogenic activities have on marine ecosystems. Sediment and fauna samples from 13 stations along the whole coast of Cameroon were analyzed to assess the level of trace metal pollution in sediments and intertidal fauna. Sediments showed enrichment of As, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V, and Zn. However, pollution of greater concern was observed for Cd, Cr, Cu, Ni, and Zn at the northern stations. Some sites recorded trace metal levels higher than recommended in sediment quality guidelines. Species diversity was low, and high bioaccumulation of trace metals was observed in biological samples. Some edible gastropod species accumulated trace metals above the safety limits of the World Health Organization, European Medicine Agency, and the US Environment Protection Agency. Although industrial pollution is significant along Cameroon's coast, natural pollution from the volcano Mount Cameroon is also of concern.

Assessment of receptor-mediated activity (AhR and ERα), mutagenicity, and teratogenicity of metal shredder wastes in Wallonia, Belgium.

In this study, hazardous wastes including fluff, dust, and scrubbing sludge were sampled in 2019 from two metal shredding facilities located in Wallonia, Belgium. To assess the extent of the contamination, a global approach combining chemical and biological techniques was used, to better reflect the risks to health and the environment. The samples investigated induced significant in vitro aryl hydrocarbon receptor (AhR) agonistic bioactivities and estrogenic receptor (ERα) (ant)agonistic bioactivities in the respective CALUX (chemical activated luciferase gene expression) bioassays. The mutagenicity of the samples was investigated with the bacterial reverse gene mutation test using the Salmonella typhimurium TA98 and TA100 strains. Except for the sludge sample (site 3), all samples induced a mutagenic response in the TA98 strain (± S9 metabolic fraction) whereas in the TA100 strain (+ S9 metabolic fraction), only the sludge sample (site 2) showed a clear mutagenic effect. The in vivo toxicity/teratogenicity of the shredder wastes was further evaluated with zebrafish embryos. Except for the dust sample (site 2), all samples were found to be teratogenic as they returned teratogenic indexes (TIs) > 1. The high levels of contamination, the mutagenicity, and the teratogenicity of these shredder wastes raise significant concerns about their potential negative impacts on both human health and environment.

Level of BPA contamination in resin composites determines BPA release.

OBJECTIVES: Resin composites may release bisphenol A (BPA) due to impurities present in the monomers. However, there is a lack of knowledge regarding the leaching characteristics of BPA from resin composites. Therefore, experimental resin composites were prepared with known amounts of BPA. The objective of this study was (1) to determine which amount of BPA initially present in the material leaches out in the short term and, (2) how this release is influenced by the resin composition. METHODS: BPA (0, 0.001, 0.01, or 0.1 wt%) was added to experimental resin composites containing 60 mol% BisGMA, BisEMA(3), or UDMA, respectively, as base monomer and 40 mol% TEGDMA as diluent monomer. Polymerized samples (n = 5) were immersed at 37 °C for 7 days in 1 mL of water, which was collected and refreshed daily. BPA release was quantified with UPLC-MS/MS after derivatization with pyridine-3-sulfonyl chloride. RESULTS: Between 0.47 to 0.67 mol% of the originally added BPA eluted from the resin composites after 7 days. Similar elution trends were observed irrespective of the base monomer. Two-way ANOVA showed a significant effect of the base monomer on BPA release, but the differences were small and not consistent. SIGNIFICANCE: The released amount of BPA was directly proportional to the quantity of BPA present in the resin composite as an impurity. BPA release was mainly diffusion-based, while polymer composition seemed to play a minor role. Our results underscore the importance for manufacturers only to use monomers of the highest purity in dental resin composites to avoid unnecessary BPA exposure in patients.

Prediction and assessment of xenoestrogens mixture effects using the in vitro ERα-CALUX assay.

Introduction: Many natural or synthetic compounds used in foods, dietary supplements, and food contact materials (FCMs) are suspected endocrine disruptors (EDs). Currently, scientific evidence to predict the impacts on biological systems of ED mixtures is lacking. In this study, three classes of substances were considered: i) phytoestrogens, ii) plant protection products (PPP) and iii) substances related to FCMs. Fourteen compounds were selected based on their potential endocrine activity and their presence in food and FCMs. Methods: These compounds were evaluated using an in vitro gene expression assay, the ERα-CALUX, to characterize their responses on the estrogen receptor alpha. Cells were exposed to fixed ratio mixtures and non-equipotent mixtures of full and partial agonists. The concentration-response curves measured for the three classes of compounds were characterized by variable geometric parameters in terms of maximum response (efficacy), sensitivity (slope) and potency (median effective concentration EC50). To account for these variations, a generic response addition (GRA) model was derived from mass action kinetics. Results: Although GRA does not allow us to clearly separate the concentration addition (CA) and independent action (IA) models, it was possible to determine in a statistically robust way whether the combined action of the chemicals in the mixture acted by interaction (synergy and antagonism) or by additive behavior. This distinction is crucial for assessing the risks associated with exposure to xenoestrogens. A benchmark dose approach was used to compare the response of phytoestrogen blends in the presence and absence of the hormone estradiol (E2). At the same time, 12 mixtures of 2-5 constituents including phytoestrogens, phthalates and PPPs in proportions close to those found in food products were tested. In 95% of cases, the response pattern observed showed a joint and independent effect of the chemicals on ER. Discussion: Overall, these results validate a risk assessment approach based on an additive effects model modulated by intrinsic toxicity factors. Here, the CA and IA approaches cannot be distinguished solely based on the shape of the concentration response curves. However, the optimized GRA model is more robust than CA when the efficacy, potency, and sensitivity of individual chemical agonists show large variations.

Baseline concentrations, spatial distribution and origin of trace elements in marine surface sediments of the northern Antarctic Peninsula.

Increased human activity in the Antarctic Peninsula combined with accelerated melting of its glaciers highlights the importance of monitoring trace element concentrations. Surface sediment samples were collected around King George Island, Hope Bay and in the Bransfield Strait in February 2020 and were analysed by X-ray fluorescence spectroscopy and inductively coupled plasma mass spectrometry. The methods display a good correlation. Our results show clear distinctions between these regions for selected elements with high local heterogeneities. Hope Bay exhibited lower concentrations of Fe, Mn, Co, V, Zn while most stations in the Bransfield Strait and around King George Island showed moderate to significant enrichment in Cu, As and Cd. Twelve stations presented a moderate ecological risk. The consistency of our values supports a natural rather than anthropogenic origin, possibly related to volcanism and the geology of the area. However, our results suggest an increase in Cr that should be further investigated.

Estrogenic activity and ecological risk of steroids, bisphenol A and phthalates after secondary and tertiary sewage treatment processes.

Effluents of sewage treatment plants (STPs) are an important source of estrogenic substances to the receiving water bodies affecting their ecological safety. In this study, steroids, bisphenol A (BPA) and phthalates were assessed in the secondary (SE) and tertiary effluent (TE) of three typical urban STPs in Beijing (China). In addition, the overall estrogenic activity in these effluents was assessed by an in-vitro bioassay (ERE-CALUX). Results showed that the concentrations and activities of estrogenic compounds in TE were lower than those in SE. The residual concentration of 17ß-estradiol (E2) was the highest among the detected steroids, accounting for 51.6 ± 5.1% in SE and 57.5 ± 24.8% in TE. The residual level (25.2-41.6 ng/L) of BPA in effluents was significantly higher than that of steroids (0.2-28.8 ng/L). The residual concentration of diethyl phthalate was the highest among the detected phthalates accounting for 47.1 ± 5.1% in SE and 37.6 ± 11.5% in TE. Steroids and BPA had a higher removal rate (83.5% and 96.7%) in secondary and tertiary treatment than phthalates (68.8% and 83.1%). The hydrophobic characteristics of these estrogenic compounds determined the removal mechanism. The removal of steroids, BPA, dimethyl phthalate and diethyl phthalate (LogKow= 1.61-4.15) mainly occurred through biodegradation in the water phase, while the removal of dibutyl phthalate, butylbenzyl phthalate and di(2-ethylhexyl) phthalate (LogKow= 4.27-7.50) mainly occurred in the solid phase after adsorption on and sedimentation of the suspended particulate matter. According to ERE-CALUX, the estrogenic activity in the final STP effluents was 3.2-45.6 ng E2-equivalents/L, which is higher than reported levels in the effluents of European STPs. Calculation of estrogenic equivalents by using substance specific chemical analysis indicated that the dominant contributor was E2 (56.4-88.4%), followed by 17α-ethinylestradiol (EE2) (4.1-34.8%), both also exerting a moderate risk to the aquatic ecosystem. While the upgrade of treatment processes in STPs has efficiently reduced the emission of estrogenic substances, their ecological risk was not yet phased out.

Identification of chemicals leaching from dental resin-based materials after in vitro chemical and salivary degradation.

OBJECTIVES: Only little is known about degradation of methacrylate monomers. Therefore, using in vitro chemical and saliva degradation this study aimed to identify the degradation products of organic compounds present in resin-based dental materials. METHODS: Ten dental monomers and nine polymerized dental resin-based materials were immersed for 24 h in chemical media (0.1 M HCl, 0.1 M NaOH) and human pooled saliva in order to identify leached monomers and degradation products from chemical and saliva degradation. Samples were analyzed using liquid chromatography coupled to high-resolution mass spectrometry to identify previously unknown degradation products. RESULTS: During in vitro chemical degradation, uncured monomers were rapidly hydrolyzed into mono- and demethacrylated degradation products. During chemical degradation in alkaline conditions of polymerized materials, considered the worst-case scenario, only degradation products could be detected. In acidic conditions, monomers and their degradation products were detected. In addition, different additives such as EDMAB, DMPA and HMBP were present in acidic degradation samples. Degradation in human pooled saliva for 24 h to mimic the in vivo situation, resulted in the identification of both monomers and their degradation products. CLINICAL SIGNIFICANCE: Using state-of-the-art high-resolution mass spectrometry previously unknown degradation products of commonly used monomers were identified for the first time. Results show that patients may be exposed to monomers and their degradation products in the first 24 h after restorative procedures. The results provide a base for further research on the degradation of resin-based dental composites in order to assess their safety using elution and toxicity studies.

Naturally occurring potentially toxic elements in groundwater from the volcanic landscape around Mount Meru, Arusha, Tanzania and their potential health hazard.

The population of the semi-arid areas of the countries in the East African Rift Valley (EARV) is faced with serious problems associated with the availability and the quality of the drinking water. In these areas, the drinking water supply largely relies on groundwater characterised by elevated fluoride concentration (> 1.5 mg/L), resulting from interactions with the surrounding alkaline volcanic rocks. This geochemical anomaly is often associated with the presence of other naturally occurring potentially toxic elements (PTEs), such as As, Mo, U, V, which are known to cause adverse effects on human health. This study reports on the occurrence of such PTEs in the groundwater on the populated flanks of Mt. Meru, an active volcano situated in the EARV. Our results show that the majority of analysed PTEs (Al, As, Ba, Cd, Cr, Cu, Fe, Mn, Ni, Se, Sr, Pb, and Zn) are within the acceptable limits for drinking purpose in samples collected from wells, springs and tap systems, suggesting that there is no immediate health risk associated with these PTEs. However, some of the samples were found to exceed the WHO tolerance limit for U (> 30 µg/L) and Mo (> 70 µg/L). The sample analysis also revealed that in some of the collected samples, the concentrations of total dissolved solids, Na+ and K+ exceed the permissible limits. The concerning levels of major parameters and PTEs were found to be associated with areas covered with debris avalanche deposits on the northeast flank, and volcanic ash and alluvial deposits on the southwest flanks of the volcano. The study highlights the need to extend the range of elements monitored in the regional groundwater and make a more routine measurement of PTEs to ensure drinking water safety and effective water management measures.

Bisphenol A release from short-term degraded resin-based dental materials.

OBJECTIVES: There is still much debate about the release of bisphenol A (BPA) from resin-based dental materials. Therefore, this study aimed to quantify BPA present as an impurity and to evaluate whether their degradation by salivary, bacterial, and chemical challenges could increase its release. METHODS: BPA was determined in three different amounts (300, 400, and 500 µg) of eight unpolymerized resin-based materials (four composites, one fissure sealant, two adhesives and one root canal sealer). Next, polymerized samples (n = 5) of each material were immersed in 1 mL of whole human pooled saliva collected from adults, Streptococcus mutans (2 × 107 CFU/mL), and acidic (0.1 M HCl), alkaline (0.1 M NaOH), and control media, respectively. The amount of BPA was quantified using an UPLC-MS/MS method including derivatization of BPA by pyridine-3-sulfonyl chloride. RESULTS: Only the composites contained trace amounts of BPA above the limit of quantification (ranging from 301±32 pg PBA/mg to 1534±62 pg BPA/mg), most likely as impurity from the synthesis of the monomers. The amounts of BPA released from polymerized materials upon salivary and bacterial degradation were too low for accurate quantification, but in water, quantifiable amounts of BPA were released from all materials. In alkaline media, the BPA release from two composites was significantly decreased, while the release from one adhesive was significantly increased, compared to water. CONCLUSIONS: BPA already present in unpolymerized resin-based materials may account for the release of BPA after polymerization. There was no clear indication that short-term material degradation leads to increased release of BPA.

Assessment of hazards and risks associated with dietary exposure to mineral oil for the Belgian population.

Recently collected dietary exposure data on mineral oil saturated (MOSH) and aromatic (MOAH) hydrocarbons were used to evaluate the risks associated with exposure to mineral oil through food for the Belgian population. For MOSH, the no observed adverse effect level (NOAEL) value of 19 mg kg-1 bw day-1 based on the hepatic inflammation-associated granulomas found in a 90-day oral study in F-344 rats was used as point of departure (PoD). Due to existing toxicological uncertainties, the margin of exposure (MOE) approach was applied. In all investigated scenarios, the MOE values were well above 100, indicating that there is no direct health concern related to MOSH exposure for the Belgian population. Nevertheless, more appropriate risk assessment approaches for MOSH based on adequate PoD are needed. For dietary exposure to MOAH, which are potentially genotoxic and carcinogenic, no MOE values could be calculated due to the lack of adequate dose-response carcinogenicity data. In two investigated worst-case scenarios, a health concern related to MOAH exposure could not be excluded, highlighting that more data are needed to perform an adequate risk assessment. The possibility to use in vitro bioassays to collect such additional toxicological information for MOAH present in food samples was also investigated.

Development of a simulated lung fluid leaching method to assess the release of potentially toxic elements from volcanic ash.

Freshly erupted volcanic ash contains a range of soluble elements, some of which can generate harmful effects in living cells and are considered potentially toxic elements (PTEs). This work investigates the leaching dynamics of ash-associated PTEs in order to optimize a method for volcanic ash respiratory hazard assessment. Using three pristine (unaffected by precipitation) ash samples, we quantify the release of PTEs (Al, Cd, Co, Cr, Cu, Fe, Mn, Ni, Pb, V, Zn) and major cations typical of ash leachates (Mg, Na, Ca, K) in multiple simulated lung fluid (SLF) preparations and under varying experimental parameters (contact time and solid to liquid ratio). Data are compared to a standard water leach (WL) to ascertain whether the WL can be used as a simple proxy for SLF leaching. The main findings are: PTE concentrations reach steady-state dissolution by 24 h, and a relatively short contact time (10 min) approximates maximum dissolution; PTE dissolution is comparatively stable at low solid to liquid ratios (1:100 to 1:1000); inclusion of commonly used macromolecules has element-specific effects, and addition of a lung surfactant has little impact on extraction efficiency. These observations indicate that a WL can be used to approximate lung bioaccessible PTEs in an eruption response situation. This is a useful step towards standardizing in vitro methods to determine the soluble-element hazard from inhaled ash.

Bisphenol A as degradation product of monomers used in resin-based dental materials.

OBJECTIVE: There is still much debate about the release of bisphenol-A (BPA) from dental materials. Therefore, this study aimed to quantify BPA present as an impurity in both BPA-based and non-BPA-based monomers and to evaluate whether these monomers may degrade to BPA upon salivary, bacterial, and chemical challenges. METHODS: BPA was determined in three different amounts (1, 2, and 3 µmol) of each monomer (TEGDMA, UDMA, mUDMA, BisGMA, BisEMA-3, -6, -10, -30, BisPMA, EBPADMA urethane, BADGE, and BisDMA). Next, the monomers (3 µmol) were immersed in whole human pooled saliva collected from adults, Streptococcus mutans (2 × 107 CFU/mL), and acidic (0.1 M HCl), alkaline (0.1 M NaOH), and control media. The amount of BPA was quantified using a specific and highly sensitive UPLC-MS/MS method including derivatization of BPA by pyridine-3-sulfonyl chloride. RESULTS: The monomers BisGMA and BisEMA-3 contained trace amounts (0.0006% and 0.0025%, respectively) of BPA as impurities of their synthesis process. BPA concentrations increased when the monomers BisGMA, BisEMA-3, BisEMA-6, BisEMA-10, BisPMA and BADGE were exposed to saliva and S. mutans, indicating degradation of a small amount of monomer into BPA. In addition, BisPMA and BADGE degraded into BPA under alkaline conditions. The conversion rate of the monomers into BPA ranged between 0.0003% and 0.0025%. SIGNIFICANCE: Impurities and degradation of BPA-based monomers may account for the release of BPA from resin-based dental materials. Even though the detected amounts of BPA due to monomer impurity were small, manufacturers of dental materials can reduce the BPA content by using only monomers of the highest purity. Considering the overall current trend towards BPA-free materials, it may be recommendable to investigate whether non-BPA based monomers can be used in dental resin-based materials.

Long-term elution of bisphenol A from dental composites.

OBJECTIVES: BPA release from composites on the short term has been reported in several in-vitro and in-vivo studies. However, it remains unclear whether these materials also leach BPA on the long term. Even though composites may release various (BPA-based) methacrylate monomers up to one year, quantitative data about BPA have not been reported due to the lack of a sensitive method to accurately quantify low levels of BPA. In this context, the aim of the study was to quantify the one-year release of BPA with an optimized analytical method. METHODS: Composite disks (n = 6, 6 mm diameter and 2 mm height) from four commercial materials (G-ӕnial Posterior, Venus, Ceram.x mono and Filtek Supreme XTE) were immersed in 1 mL of water or ethanol as extraction solvent and stored in the dark at 37 °C. The extraction solvent was renewed weekly for a period of 52 weeks. Samples were derivatized with pyridine-3-sulfonyl chloride before analysis with ultra-pressure liquid chromatography tandem mass spectrometry (UPLC-MS/MS). RESULTS: Derivatizing BPA increased the sensitivity of the analytical method and allowed accurate quantification of very low levels of BPA (i.e. 0.78 pmol BPA). BPA eluted continuously in ethanol from all four tested composites over a period of one year. BPA elution was clearly higher when ethanol was used as extraction solution. In water, BPA eluted could be detected up to one year, but levels could not be accurately quantified anymore after several weeks. SIGNIFICANCE: Composites can be considered as a potential long-term source of BPA, and thus should not be neglected when assessing the overall exposure to endocrine disrupting chemicals.