RESUMEN
For the first time, this study shows the nanoarchitectonic process to obtain an acetogenin-enriched nanosystem (AuNPs-Ac) using an aqueous extract fromAnnona cherimolaMill (ACM) composed of gold nanoparticles embedded in an organic matrix that acts as stabilizing agent and presents anti-inflammatory activity and cytotoxical effect against HepG2 cell line, promoting apoptosis. The synthesis of AuNPs-Ac was confirmed by x-ray diffraction analysis, showing metallic gold as the only phase, and the scanning transmission microscope showed an organic cap covering the AuNPs-Ac. Fourier-transformed infrared suggests that the organic cap comprises a combination of different annonaceous acetogenins, alkaloids, and phenols by the presence of bands corresponding to aromatic rings and hydroxyl groups. High-Performance Liquid Chromatography has demonstrated the presence of annonacin, a potent acetogenin, in the extract of ACM. Anin vitroanti-inflammatory activity of the extract of ACM and the AuNPs-Ac was performed using the albumin denaturation method, showing a nonlinear response, which is better than sodium diclofenac salt in a wide range of concentrations that goes from 200 to 400µg ml-1with both samples. The viability assay was studied using trypan blue, treating IMR90 and HepG2 at different concentrations of AuNPs-Ac. The results defined a median lethal dose of 800µg ml-1against HepG2 through apoptosis according to the ratio of caspase-cleaved 9/alpha-tubulin evaluated. It was also demonstrated that the nanosystem presents a higher cytotoxic effect on the HepG2 cell line than in IMR90, suggesting a targeted mechanism. In addition, the nanosystem performs better than using only the extract of ACM in the anti-inflammatory or antiproliferative test, attributed to their higher surface area.
Asunto(s)
Acetogeninas , Antiinflamatorios , Apoptosis , Oro , Nanopartículas del Metal , Extractos Vegetales , Humanos , Acetogeninas/farmacología , Acetogeninas/química , Células Hep G2 , Apoptosis/efectos de los fármacos , Antiinflamatorios/farmacología , Antiinflamatorios/química , Extractos Vegetales/química , Extractos Vegetales/farmacología , Nanopartículas del Metal/química , Oro/química , Oro/farmacología , Supervivencia Celular/efectos de los fármacosRESUMEN
In this work, the influence of the Sargassum natans I alga extract on the morphological characteristics of synthesized ZnO nanostructures, with potential biological and environmental applications, was evaluated. For this purpose, different ZnO geometries were synthesized by the co-precipitation method, using Sargassum natans I alga extract as stabilizing agent. Four extract volumes (5, 10, 20, and 50 mL) were evaluated to obtain the different nanostructures. Moreover, a sample by chemical synthesis, without the addition of extract, was prepared. The characterization of the ZnO samples was carried out by UV-Vis spectroscopy, FT-IR spectroscopy, X-ray diffraction, and scanning electron microscopy. The results showed that the Sargassum alga extract has a fundamental role in the stabilization process of the ZnO nanoparticles. In addition, it was shown that the increase in the Sargassum alga extract leads to preferential growth and arrangement, obtaining well-defined shaped particles. ZnO nanostructures demonstrated significant anti-inflammatory response by the in vitro egg albumin protein denaturation for biological purposes. Additionally, quantitative antibacterial analysis (AA) showed that the ZnO nanostructures synthesized with 10 and 20 mL of extract demonstrated high AA against Gram (+) S. aureus and moderate AA behavior against Gram (-) P. aeruginosa, depending on the ZnO arrangement induced by the Sargassum natans I alga extract and the nanoparticles' concentration (ca. 3200 µg/mL). Additionally, ZnO samples were evaluated as photocatalytic materials through the degradation of organic dyes. Complete degradation of both methyl violet and malachite green were achieved using the ZnO sample synthesized with 50 mL of extract. In all cases, the well-defined morphology of ZnO induced by the Sargassum natans I alga extract played a key role in the combined biological/environmental performance.
Asunto(s)
Nanopartículas del Metal , Sargassum , Óxido de Zinc , Óxido de Zinc/farmacología , Óxido de Zinc/química , Espectroscopía Infrarroja por Transformada de Fourier , Nanopartículas del Metal/química , Staphylococcus aureus , Antibacterianos/farmacología , Antibacterianos/química , Extractos Vegetales/farmacología , Difracción de Rayos X , Pruebas de Sensibilidad MicrobianaRESUMEN
The present work shows the synthesis of ZnO nanoparticles through a green method, using sargassum extracts, which provide the reducing and stabilizing compounds. The conditions of the medium in which the reaction was carried out was evaluated, that is, magnetic stirring, ultrasound assisted, and resting condition. UV-Vis, FTIR spectroscopy, and X-ray diffraction results confirmed the synthesis of ZnO with nanometric crystal size. The scanning electron microscopy analysis showed that the morphology and size of the particles depends on the synthesis condition used. It obtained particles between 20 and 200 nm in the sample without agitation, while the samples with stirring and ultrasound were 80 nm and 100 nm, respectively. ZnO nanoparticles showed antibacterial activity against Gram-positive S. aureus and Gram-negative P. aeruginosa. A quantitative analysis was performed by varying the concentration of ZnO nanoparticles. In all cases, the antibacterial activity against Gram-positives was greater than against Gram-negatives. Ultrasound-assisted ZnO nanoparticles showed the highest activity, around 99% and 80% for S. aureus and P. aeruginosa, respectively. Similar results were obtained in the study of the anti-inflammatory activity of ZnO nanoparticles; the ultrasound-assisted sample exhibited the highest percentage (93%), even above that shown by diclofenac, which was used as a reference. Therefore, the ZnO nanoparticles synthesized with sargassum extracts have properties that can be used safely and efficiently in the field of biomedicine.
Asunto(s)
Nanopartículas del Metal , Sargassum , Óxido de Zinc , Sargassum/química , Óxido de Zinc/farmacología , Óxido de Zinc/química , Nanopartículas del Metal/química , Staphylococcus aureus , Antibacterianos/química , Espectroscopía Infrarroja por Transformada de Fourier , Difracción de Rayos X , Extractos Vegetales/farmacología , Extractos Vegetales/química , Pruebas de Sensibilidad MicrobianaRESUMEN
Bone Regeneration represents a clinical need, related to bone defects such as congenital anomalies, trauma with bone loss, and/or some pathologies such as cysts or tumors This is why a polymeric biomaterial that mimics the osteogenic composition and structure represents a high potential to face this problem. The method of obtaining these materials was first to prepare a stabilized hydrogel by means of physical bonds and then to make use of the lyophilization technique to obtain the 3D porous scaffolds with temperature conditions of -58 °C and pressure of 1 Pa for 16 h. The physicochemical and bioactive properties of the scaffolds were studied. FTIR and TGA results confirm the presence of the initial components in the 3d matrix of the scaffold. The scaffolds exhibited a morphology with pore size and interconnectivity that promote good cell viability. Together, the cell viability and proliferation test, Alamar BlueTM and the differentiation test: alizarin staining, showed the ability of physically stabilized scaffolds to proliferate and differentiate swine dental pulp stem cell (DPSCs) followed by mineralization. Therefore, the Cs-PCL-PVA-HA scaffold stabilized by physical bonds has characteristics that suggest great utility for future complementary in vitro tests and in vivo studies on bone defects. Likewise, this biomaterial was enhanced with the addition of HA, providing a scaffold with osteoconductive properties necessary for good regeneration of bone tissue. Graphical abstract.
Asunto(s)
Quitosano , Durapatita , Porcinos , Animales , Durapatita/química , Ingeniería de Tejidos/métodos , Quitosano/química , Alcohol Polivinílico , Andamios del Tejido/química , Pulpa Dental , Osteogénesis , Materiales Biocompatibles/química , Diferenciación Celular , Huesos , Células Madre , Proliferación CelularRESUMEN
Detection and quantification of diverse analytes such as molecules, cells receptor and even particles and nanoparticles, play an important role in biomedical research, particularly in electrochemical sensing platform technologies. In this study, gold nanoparticles (AuNPs) prepared by green synthesis from Sargassum sp. were characterized using ultraviolet-visible (UV-Vis) and Fourier transform-infrared (FT-IR) spectroscopies, X-ray diffraction (XRD), scanning electron microscopy (SEM), dynamic light scattering (DLS) and zeta potential (ζ) obtaining organic capped face-centered cubic 80-100 nm AuNPs with an excellent stability in a wide range of pH. The AuNPs were used to modify a carbon nanotubes-screen printed electrode (CNT-SPE), through the drop-casting method, to assemble a novel portable electrochemical sensing platform for glucose, using a novel combination of components, which together have not been employed. The ability to sense and measure glucose was demonstrated, and its electrochemical fundamentals was studied using cyclic voltammetry (CV). The limits of detection (LOD) and quantification (LOQ) to glucose were 50 µM and 98 µM, respectively, and these were compared to those of other sensing platforms.
Asunto(s)
Electrodos , Nanopartículas del Metal , Nanotubos de Carbono , Sargassum/química , Oro , Tecnología Química Verde , Espectroscopía Infrarroja por Transformada de FourierRESUMEN
Anthocyanins are used for food coloring due their low toxicity and health benefits. They are extracted from different sources, but black carrot has higher anthocyanin content compared with common fruits and vegetables. Here, we study alcoholic anthocyanin extracts from black carrot to enhance their stability. The objective of our research is to determine if microencapsulation with tetraethyl orthosilicate (TEOS) is a feasible option for preventing black carrot anthocyanin degradation. Extraction solvents were solutions of (1) ethanol/acetic acid and (2) ethanol/citric acid. Samples were purified through a resin column and microencapsulated using TEOS. Fourier Transformed Infrared Spectroscopy (FTIR) spectra of samples were obtained, and degradation studies were performed under different conditions of UV radiation, pH and temperature. Antioxidant activity was evaluated with radical 2,2-diphenyl-1-picrylhydrazyl (DPPH) scavenging and electrochemical cupric reducing antioxidant capacity (CUPRAC). Color evaluation on food models were performed with CIE Lab at the beginning of experiments and after 25 days of storage. Results indicate that the more stable extracts against pH media changes are samples obtained with ethanol/acetic acid solution as extraction solvent. Extract purification through resin and TEOS microencapsulation had no significant effect on extract stability. In conclusion, although TEOS microencapsulation has proven to be effective for some dried materials from natural extracts in our previous research, we do not recommend its use for black carrot extracts considering our results in this particular case.
Asunto(s)
Antocianinas/química , Daucus carota/química , Extractos Vegetales/química , Cromatografía Líquida de Alta Presión , Daucus carota/efectos de la radiación , Análisis de los Alimentos , Concentración de Iones de Hidrógeno , Fitoquímicos/química , Espectroscopía Infrarroja por Transformada de Fourier , Termodinámica , Rayos UltravioletaRESUMEN
Downstream waste from industry and other industrial processes could increase concentration of heavy metals in water. These pollutants are commonly removed by adsorption because it is an effective and economical method. Previously, we reported adsorption capacity of a chitosan/polyurethane/titanium dioxide (TiO2) composite for three ions in a dynamic wastewater system. There, increasing the chitosan concentration in composite increased the cation removal as well; however, for ratios higher than 50% of chitosan/TiO2, the manufacturing cost increased significantly. In this work, we address the manufacturing cost problem by proposing a new formulation of the composite. Our hypothesis is that inulin could replace chitosan in the composite formulation, either wholly or in part. In this exploratory research, three blends were prepared with a polyurethane matrix using inulin or/and chitosan. Adsorption was evaluated using a colorimetric method and the Langmuir and Freundlich models. Fourier-transform infrared spectroscopy (FTIR) spectra, scanning electron microscopy (SEM) micrographs, differential scanning calorimetry and thermogravimetric analysis curves were obtained to characterize blends. Results indicate that blends are suitable for toxic materials removal (specifically lead II, Pb2+). Material characterization indicates that polysaccharides were distributed in polyurethane's external part, thus improving adsorption. Thermal degradation of materials was found above 200 °C. Comparing the blends data, inulin could replace chitosan in part and thereby improve the cost efficiency and scalability of the production process of the polyurethane based-adsorbent. Further research with different inulin/chitosan ratios in the adsorbent and experiments with a dynamic system are justified.
Asunto(s)
Adsorción , Quitosano/química , Inulina/química , Plomo , Polisacáridos/química , Poliuretanos/química , Cinética , Metales Pesados/química , Espectroscopía Infrarroja por Transformada de Fourier , Termogravimetría , Aguas Residuales/química , Contaminantes Químicos del Agua/química , Purificación del Agua/métodosRESUMEN
A novel, simple and inexpensive modification method using TEOS to increase the UV light, pH and temperature stability of a red-beet-pigment extracted from Beta vulgaris has been proposed. The effects on the molecular structure of betalains were studied by FTIR spectroscopy. The presence of betacyanin was verified by UV-Vis spectroscopy and its degradation in modified red-beet-pigment was evaluated and compared to the unmodified red-beet-pigment; performance improvements of 88.33%, 16.84% and 20.90% for UV light, pH and temperature stability were obtained, respectively,. Measurements of reducing sugars, phenol, and antioxidant contents were performed on unmodified and modified red-beet-pigment and losses of close to 21%, 54% and 36%, respectively, were found to be caused by the addition of TEOS. Polar diagrams of color by unmodified and modified red-beet-pigment in models of a beverage and of a yogurt were obtained and the color is preserved, although here is a small loss in the chromaticity parameter of the modified red-beet-pigment.
Asunto(s)
Beta vulgaris/química , Conservación de Alimentos , Calor , Luz , Pigmentos Biológicos/química , Silanos/químicaRESUMEN
Colorectal cancer (CRC) remains a significant global health concern, being the third most diagnosed cancer in men and the second most diagnosed cancer in women, with alarming mortality rates. Natural phytochemicals have gained prominence among various therapeutic avenues explored due to their diverse biological properties. Curcumin, extracted from turmeric, and resveratrol, a polyphenol found in several plants, have exhibited remarkable anticancer activities. However, their limited solubility and bioavailability hinder their therapeutic efficacy. To enhance the bioavailability of these compounds, nanomaterials work as effective carriers with biogenic silica (BS) attracting major attention owing to their exceptional biocompatibility and high specific surface area. In this study, we developed Curcumin-resveratrol-loaded BS (Cur-Res-BS) and investigated their effects on colorectal cancer cell lines (HCT-116 and Caco-2). Our results demonstrated significant concentration-dependent inhibition of cell viability in HCT-116 cells and revealed a complex interplay of crucial proto-onco or tumor suppressor genes, such as TP53, Bax, Wnt-1, and CTNNB1, which are commonly dysregulated in colorectal cancer. Notably, Cur-Res-BS exhibited a synergistic impact on key signaling pathways related to colorectal carcinogenesis. While these findings are promising, further investigations are essential to comprehensively understand the mechanisms and optimize the therapeutic strategy. Moreover, rigorous safety assessments and in vitro studies mimicking the in vivo environment are imperative before advancing to in vivo experiments, ensuring the potential of Cur-Res-BS as an efficient treatment for CRC.
RESUMEN
Polyurethane-based micro- and nano-hybrid composites were produced with controlled porosity to be used as obturation materials. In addition to hydroxyapatite (HAp) micro-particles in the composites, two different ceramics particle types were also added: alumina micro-particles and silica nano-particles. Particles of different sizes provide the materials with improved mechanical properties: the use of micro- and nano-particles produces a better packing because the nano-particles fill the interstitial space left by the micro-particles, rendering an improvement in the mechanical properties. The silica and alumina particles provide the materials with appropriate abrasion and scratching properties, while the HAp provides the required bio-acceptance. The polymeric matrix was a mono-component solvent-free polyurethane. The porosity was selected by controlling the chemical reaction.
RESUMEN
Dye-Sensitized Solar Cells (DSSCs), based on TiO(2) and assembled using a dye from Beta vulgaris extract (BVE) with Tetraethylorthosilicate (TEOS), are reported. The dye BVE/TEOS increased its UV resistance, rendering an increase in the cell lifetime; the performance of these solar cells was compared to those prepared with BVE without TEOS. The efficiency η for the solar energy conversion was, for BVE and BVE/TEOS, of 0.89% ± 0.006% and 0.68% ± 0.006% with a current density Jsc of 2.71 ± 0.003 mA/cm2 and 2.08 ± 0.003 mA/cm2, respectively, using in both cases an irradiation of 100 mW/cm2 at 25 °C. The efficiency of the BVE solar cell dropped from 0.9 ± 0.006 to 0.85 ± 0.006 after 72 h of operation, whereas for the BVE/TEOS, the efficiency remained practically constant in the same period of time.
RESUMEN
Carbon quantum dots (CQDs) are a new carbon-based nanomaterial that has attracted tremendous attention due to their excellent fluorescent properties, chemical stability, water solubility, and biocompatibility features. Here, fluorescent CQDs synthesized by a green nanoarchitectonic method using Cinchona Pubescens Vahl extract were evaluated as drug nanocarriers for carboplatin (CBP) delivery. The characterization methods showed CQDs with semispherical shapes and sizes around 5 nm, temperature- and pH-dependent functional groups that interact with the CBP molecule adding specificity to the drug-delivery system. Based on the load efficiency results, it seems that the CQDs can carry almost 100 µg of carboplatin for every 1 mg of CQDs. This is possible due to the self-assembly process that takes place through the interaction between the protonation/deprotonation functional groups of CQDs and the hydrolyzed CBP molecule. Through this process, it is created spherical nanoparticles with an average size of 77.44 nm. The CQDs-CBP nanoparticles release the drug through a diffusion-controlled release mechanism where the acidic media is preferred, and the EPR effect also plays a helpful role. Besides, the viability test shows that the CQDs have almost null cytotoxicity suggesting that they could be used as a promising cancer treatment, improving the efficiency of cell internalization and significantly increasing their drug delivery.
Asunto(s)
Cinchona , Neoplasias , Puntos Cuánticos , Nanoestructuras/química , Cinchona/química , Carbono/química , Neoplasias/terapia , Humanos , Animales , Ratones , Línea Celular , Supervivencia CelularRESUMEN
Today, regenerative osteogenesis represents a clinical need, due to the incidence of bone defects that involve groups of pathologies ranging from congenital anomalies to traumatic injuries, as well as problems presented surgically. This is why the design of a polymeric biomaterial (scaffold) of chitosan, carboxymethylcellulose, zinc oxide, and calcium carbonate with similar characteristics in terms of composition and bone structure offers high potential to help address this health problem. The technique for obtaining the scaffolds of this research was to develop a physical hydrogel to have the biofunctionality of the active groups of the polymer chains used, then make use of the lyophilization process to obtain three-dimensional (3D) porous scaffolds. The physicochemical and biological properties of the scaffolds were evaluated. The scaffolds presented morphology with pore size and interconnectivity that favor the need for cell proliferation and viability. The biocompatibility tests confirm that the designed scaffolds do not present cytotoxicity and the analyzes with alizarin red staining show calcium deposits in the materials with CaCO3 and ZnO. Osteoinduction assays to osteogenic lineage using runt-related transcription factor type 2 (RUNX2) and collagen type 1 (COL-1) antibodies allowed expression in differentiated cells. Therefore, the calcium carbonate-containing scaffolds stabilized by physical bonds have characteristics of being non-cytotoxic, bioactive, and osteoinductive, which motivate their use in future tests to evaluate their demeanor with rat models for bone engineering studies.
Asunto(s)
Quitosano , Óxido de Zinc , Ratas , Animales , Ingeniería de Tejidos/métodos , Quitosano/química , Andamios del Tejido/química , Carboximetilcelulosa de Sodio , Carbonato de Calcio , Osteogénesis , Diferenciación Celular , Proliferación CelularRESUMEN
In this study, green chemistry was used as a tool to obtain gold nanoparticles using Amphipterygium adstringens extracts as a synthesis medium. Green ethanolic and aqueous extracts were obtained using ultrasound and shock wave-assisted extraction. Gold nanoparticles with sizes ranging between 100 and 150 nm were obtained with ultrasound aqueous extract. Interestingly, homogeneous quasi-spherical gold nanoparticles with sizes between 50 and 100 nm were achieved with shock wave aqueous-ethanolic extracts. Furthermore, 10 nm gold nanoparticles were obtained by the traditional methanolic macerate extraction method. The physicochemical characteristics, morphology, size, stability, and Z potential of the nanoparticles were determined using microscopic and spectroscopic techniques. The viability assay in leukemia cells (Jurkat) was performed using two different sets of gold nanoparticles, with final IC50 values of 87 µM and 94.7 µM, reaching a maximum cell viability decrease of 80% The results do not indicate a significant difference between the cytotoxic effects produced by the gold nanoparticles synthesized in this study and vincristine on normal lymphoblasts (CRL-1991).
RESUMEN
The relation between current and voltage in the electro-oxidation of ethanol by metal nanoparticles depends on experimental parameters like the applied potential, peak potential, temperature, the electron-transfer coefficient, and the number of molecules adsorbed at active sites on the nanoparticle surface. In this form, the oxidation current depends on the ability of the nanoparticles to adsorb the ethanol molecules. Though the Laviron model well describes this phenomenology, few studies focus on the dependence of the oxidation current on the size and surface properties of the metal nanoparticles. Here, we present an experimental and theoretical study that comprises the synthesis of palladium-based nanoparticles and the generalization of the Laviron model that allows determining the dependence of the oxidation current on the size, surface energy, and adsorption-desorption properties of the nanoparticles for the ethanol oxidation. The determination of the adsorption-desorption equilibrium and the electro-oxidation current dependence with the physicochemical properties of the materials was carried out by electrochemical characterization.
RESUMEN
Significant advancement in the field of nanotechnology has raised the possibility of applying potent engineered biocompatible nanomaterials within biological systems for theranostic purposes. Titanium dioxide (titanium(IV) oxide/titania/TiO2) has garnered considerable attention as one of the most extensively studied metal oxides in clinical applications. Owing to the unique properties of titania, such as photocatalytic activity, excellent biocompatibility, corrosion resistance, and low toxicity, titania nanomaterials have revolutionized therapeutic approaches. Additionally, titania provides an exceptional choice for developing innovative medical devices and the integration of functional moieties that can modulate the biological responses. Thus, the current review aims to present a comprehensive and up-to-date overview of TiO2-based nanotherapeutics and the corresponding future challenges.
RESUMEN
Analgesic consumption increased significantly during the COVID-19 pandemic. A high concentration of this kind of drug is discarded in the urine, reaching the effluents of rivers, lakes, and seas. These medicines have brought serious problems for the flora and, especially, the ecosystems' fauna. This paper presents the results of removing diclofenac, ibuprofen, and paracetamol in an aqueous solution, using Sargassum spp. from the Caribbean coast. The study consisted of mixing each drug in an aqueous solution with functionalized Sargassum spp in a container under constant agitation. Therefore, this work represents an alternative to solve two of the biggest problems in recent years; first, the reduction of the overpopulation of sargassum through its use for the remediation of the environment. Second is the removal of drug waste used excessively during the COVID-19 pandemic. Liquid samples of the solution were taken at intervals of 10 min and analyzed by fluorescence to determine the concentration of the drug. The sorption capacity for diclofenac, ibuprofen, and paracetamol was 2.46, 2.08, and 1.41 µg/g, corresponding to 98 %, 84 %, and 54 % of removal, respectively. The removal of the three drugs was notably favored by increasing the temperature to 30 and 40 °C, reaching efficiencies close to 100 %. Moreover, the system maintains its effectiveness at various pH values. In addition, the Sargassum used can be reused for up to three cycles without reducing its removal capacity. The wide diversity of organic compounds favors the biosorption of drugs, removing them through various kinetic mechanisms. On the other hand, the Sargassum used in the drugs removal was analyzed by X-ray diffraction, FTIR spectroscopy, TGA analysis, and scanning electron microscopy before and after removal. The results showed an evident modification in the structure and morphology of the algae and demonstrated the presence of the biosorbed drugs. Therefore, this system is sustainable, simple, economical, environmentally friendly, highly efficient, and scalable at a domestic and industrial level that can be used for aquatic remediation environments.
RESUMEN
The limitations associated with the clinical use of autographs and allografts are driving efforts to develop relevant and applicable biomaterial substitutes. In this research, 3D porous scaffolds composed of bioactive glass (BG) obtained through the sol-gel technique and polylactic acid (PLA) synthesized via lactic acid (LA) ring-opening polymerization were prepared by the gel-pressing technique. Two different weight compositions were evaluated, namely, BG70-PLA30 and BG30-PLA70. The structure and morphology of the resulting scaffolds were analysed by FTIR, XRD, SEM, and under ASTM F1635 standard characterizations. The results confirmed that BG promotes the formation of a hydroxy-carbonated apatite (HAp) layer on composites when immersed in simulated body fluid (SBF). Biodegradability evaluations were carried out according to the ISO 10993-13:2010 standard. In addition, electrochemical evaluations were performed in both Hank's and SBF solutions at 37 °C in order to analyse the degradation of the material. This evaluation allowed us to observe that both samples showed an activation mechanism in the early stages followed by pseudo-passivation due to physical bioactive glass characteristics, suggesting an improvement in the formation of the HAp nucleation. The described composites showed excellent resistance to degradation and outstanding suitability for bone tissue engineering applications.
RESUMEN
The performance of a new dye-sensitized solar cell (DSSC) based in a natural dye extracted from the Bougainvillea spectabilis' bracts, is reported. The performance of this solar cell was compared with cells prepared using extract of the Bougainvillea glabra and mixture of both extracts; in both cases the pigments were betalains, obtained from Reddish-purple extract. These dyes were purified to different extents and used for the construction of solar cells that were electrically characterized. The materials were characterized using FTIR and UV-Vis. Solar cells were assembled using TiO(2) thin film on indium tin oxide (ITO)-coated glass; a mesoporous film was sensitized with the Bougainvillea extracts. The obtained solar energy conversion efficiency was of 0.48% with a current density J(SC) of 2.29 mA/cm(2) using an irradiation of 100 mW/cm(2) at 25 °C.
Asunto(s)
Betalaínas/química , Colorantes/química , Nyctaginaceae/química , Hojas de la Planta/química , Energía Solar , Betalaínas/aislamiento & purificación , Colorantes/aislamiento & purificación , Técnicas Electroquímicas/métodos , Vidrio/química , Microscopía Electrónica de Rastreo , Tamaño de la Partícula , Extractos Vegetales/química , Extractos Vegetales/aislamiento & purificación , Espectrofotometría , Espectroscopía Infrarroja por Transformada de Fourier , Compuestos de Estaño/químicaRESUMEN
Sargassum species-based extracts were used to carry out the synthesis of homogeneous gold nanoparticles. Various techniques were used to determine the characteristics and composition of the nanoparticles. The UV-Vis results showed that the 50% water/ethanol extract had the most reducing agents and stabilizers. Therefore, this type of extract was used to synthesize nanoparticles and for their subsequent characterization. Crystallinity and crystal size were evaluated using X-ray diffraction. Size and morphology were analyzed using scanning electron microscopy, showing that the gold nanoparticles were mostly spherical, with a size range of 15-30 nm. The catalytic activity of the gold nanoparticles was evaluated through the degradation of organic dyes: methylene blue, methyl orange, and methyl red. The degradation rates were different, depending on the nature of each dye, the simplest to degrade was methylene blue and methyl red was the most difficult to degrade. The results indicated that the use of Sargassum spp. for the synthesis of gold nanoparticles has potential in the remediation of water that is contaminated with organic dyes. Moreover, given the recent serious environmental and economic problems caused by the overpopulation of Sargassum spp. in the Mexican Caribbean, the findings hold promise for their practical and sustainable use in the synthesis of nanomaterials.