Inflammatory profile of apical periodontitis associated with liver fibrosis in rats: histological and immunohistochemical analysis.

AIM: To investigate the effects of liver fibrosis (LF) on the pro-inflammatory mediators and periapical bone resorption of apical periodontitis (AP) in rats. METHODOLOGY: Forty male Wistar rats were distributed into four groups: C - control, AP - rats with AP, LF - rats with LF, AP + LF - rats with AP and LF. LF was induced by carbon tetrachloride administration for 8 weeks and surgical bile duct ligation for 4 weeks; AP was induced in the teeth of rats by dental pulp exposure to the oral environment for 30 days. Jaws and livers were removed after euthanasia. Haematoxylin and Eosin (H&E) and Picrosirius Red (PSR) staining were used to confirm fibrosis in the livers. The jaws were analysed using H&E staining, immunohistochemical assays of interleukin (IL)-1ß, IL-6 and tumour necrosis factor-alpha (TNF-α). Student's t-test and Mann-Whitney's U-test were used for statistical analysis (P < 0.05). RESULTS: Inflammatory infiltrate was moderate in the AP group and severe in the AP + LF group (P < 0.05). Periapical bone resorption was significantly larger in the AP + LF group compared with the AP group (P < 0.05). IL-1ß, IL-6 and TNF-α levels were significantly higher in AP + LF group when compared to the AP group (P < 0.05). CONCLUSION: More intense inflammatory infiltrate, greater amounts of pro-inflammatory cytokines and increased periapical bone resorption were observed in the presence of liver fibrosis in rats with exposed pulps.

Pre-clinical endodontic education outcomes between artificial versus extracted natural teeth: a systematic review.

AIM: To compare the educational outcomes using artificial teeth versus extracted teeth for pre-clinical endodontic training. DATA SOURCES: Literature searches of PubMed, Scopus, Cochrane Library, Trip Database, Web of Science and Open Grey databases were conducted from their inception until November 2018 with no language restriction. Hand searching of most likely relevant journals was performed. The review followed the PRISMA guidelines. STUDY ELIGIBILITY CRITERIA, PARTICIPANTS AND INTERVENTIONS: Studies that compared pre-clinical endodontic training using extracted teeth and artificial teeth were included. STUDY APPRAISAL AND SYNTHESIS METHODS: The quality of included studies was appraised by Joanna Briggs Institute Critical Appraisal tools. The findings were tabulated and summarized according to their outcomes with distinct narrative syntheses. RESULTS: Five studies were included. The component studies included 359 operators in total, mainly consisting of undergraduate students (97%, n = 349) and 10 endodontists (3%). Forty-seven per cent (n = 170) operated on artificial teeth only, whilst 19% (n = 67) worked primarily on extracted teeth, with the final treatment outcome being evaluated by independent observers using objective criteria. Operators in two studies (34%, n = 122) used both artificial teeth and ET and compared their experiences in surveys. Regarding technical outcomes, no significant differences between training with artificial teeth and extracted teeth were found, but the performance tended to be better in artificial teeth than extracted teeth. Operators trained solely on artificial teeth appeared to be adequately educated for subsequent root canal treatment (RCT) in the clinical setting. LIMITATIONS: Due to the scarcity of research on the topic overall, and the methodological variation between the studies, it was not possible to perform a quantitative analysis (meta-analysis). CONCLUSIONS AND IMPLICATIONS OF KEY FINDINGS: Based on the available evidence, the use of artificial teeth for pre-clinical endodontic training achieved similar educational outcomes compared to extracted teeth. However, the experiences reported by the operators diverged. Further studies assessing other artificial teeth available in the market testing other RCT procedures are necessary.

Effect of ultrasonic and sonic activation of root canal sealers on the push-out bond strength and interfacial adaptation to root canal dentine.

AIM: To evaluate the effect of ultrasonic and sonic activation of two root canal sealers on interfacial adaptation and push-out bond strength (BS) to root canal dentine. METHODOLOGY: The root canals of seventy-eight roots of maxillary canines were prepared with NiTi rotary instruments under irrigation with 2.5% NaOCl and 17% EDTA. Canals were filled by lateral condensation of gutta-percha and AH Plus (n = 39) or MTA Fillapex (n = 39). Three subgroups (n = 13) were formed according to sealer activation: no activation (NA), sonic activation (SA, 20 s) and ultrasonic activation (US, 20 s). In three specimens of each subgroup, 0.1% rhodamine B was added to the sealer. Three 1-mm-thick slices were obtained from each root third. The first and second were used for push-out BS test and the third for a qualitative analysis of interfacial adaptation (gaps) and voids by confocal laser scanning microscopy (CLSM). Intratubular penetration of rhodamine B-labelled sealer was also assessed by CLSM. Data were analysed by two-way anova and Tukey's test (α = 0.05). RESULTS: AH Plus (2.58 ± 1.21) had higher push-out BS than MTA Fillapex (1.45 ± 0.71) (P = 0.000). UA (2.64 ± 1.44) had higher BS (P = 0.000) than NA (1.58 ± 0.73) and SA (1.83 ± 0.85), which did not differ significantly from each other (P = 0.3303). The coronal third had higher BS (2.48 ± 1.49) than the middle (2.08 ± 0.94) (P = 0.0003) and apical (1.48 ± 0.58) (P = 0.00) thirds. For both sealers, UA was associated with a more homogeneous filling material with better interfacial adaptation and greater quantity, density and length of tags in dentinal tubules. When UA was used, the tags had similar quantity, density and length to those formed without activation, but interfacial gaps and voids were observed. CONCLUSION: Ultrasonic activation was associated with higher BS values, deeper intratubular penetration and greater interfacial adaptation to root dentine than sonic activation and no activation techniques, AH Plus had higher BS values than MTA Fillapex irrespective of the type of activation.

Evaluation of bond strength in single-cone fillings of canals with different cross-sections.

AIM: To evaluate the effect of root canal cross-sectional shape on single-cone root filling bond strength, as well as to determine the percentage of gutta-percha-filled areas (PGFA) and sealer-filled areas (PSFA), establishing a relationship between these variables. METHODOLOGY: Distal roots of mandibular molars were selected using microcomputed tomography imaging and allocated into three groups (n = 10) according to canal shape: round, oval and long oval. The canals were prepared with an R40 reciprocating instrument and filled with matching single-cone gutta-percha and AH Plus sealer. Two 1-mm-thick dentine slices were obtained from each third of each root. PGFA and PSFA were calculated in digital images (x25 magnification) of each slice. Next, the slices were subjected to a push-out test and the failure modes (adhesive, cohesive or mixed) were assessed. Data were analysed using parametric tests (P < 0.05). RESULTS: In the coronal (2.17 ± 0.56MPa) and middle thirds (1.78 ± 0.45MPa), the round canals were associated with higher bond strength values (P < 0.01), with no difference between the groups for the apical third (P > 0.05). Adhesive and mixed failures predominated in round canals, whilst cohesive failures were more frequent in oval and long oval canals. Round canals had significantly higher PGFA and lower PSFA than all other groups (P = 0.000). The PGFA and PSFA had a positive (r = 0.521, P = 0.000) and a negative (r = -0.523, P = 0.000) correlation with bond strength, respectively. CONCLUSION: Bond strength values of gutta-percha and sealer were affected by canal shape. Higher percentage of gutta-percha-filled area resulted in higher bond strength to dentine.

Effect of calcium hydroxide and endodontic irrigants on fibre post bond strength to root canal dentine.

AIM: To analyse the effect of calcium hydroxide paste, endodontic irrigants and time of application on the bond strength of fibre posts to root canal dentine. METHODOLOGY: Seventy bovine incisors were divided into 7 groups according to removal of calcium hydroxide and distilled water (CHW) (immediate - I; 21 days - 21 days; 6 months - 6 months) and endodontic irrigant (1% sodium hypochlorite - SH; 1% sodium hypochlorite + 17% EDTA - SHE). Fibre posts were cemented (RelyX U100), after which the roots were serially sectioned and submitted to a micro-push-out test. Data were analysed using two-way anova followed by the Tukey's and the Dunnett's tests (α = 0.05). RESULTS: The CHW groups were not significantly different from the control group in 13 of the 18 associated factors (P > 0.05). There were significant reductions in bond strength in the cervical (P = 0.0216) and middle (P = 0.0017) thirds of the root at 6 months in groups irrigated with SH. Irrigation with SHE reduced the bond strength significantly in the middle (P = 0.0488) and apical (P = 0.0252) thirds of the roots in the immediate groups and in the middle third (P = 0.0287) in the 21-day group. Bond strength was greater in the cervical than in the apical thirds of all immediate and 21-day groups (P < 0.05). CONCLUSIONS: Bond strength of groups that received CH paste was similar to that found in the control group in 13 of the 18 associated factors. EDTA and SH reduced bond strength in specimens in the immediate (middle and apical thirds) and 21-day (middle third) groups. There was a significant reduction in bond strength in the groups irrigated with SH and tested at 6 months (cervical and middle thirds). There was a predominance of adhesive failures between resin cement and dentine in all groups.

Influence of post system and remaining coronal tooth tissue on biomechanical behaviour of root filled molar teeth.

AIM: To investigate ex vivo the influence of post system and amount of remaining coronal tooth tissue on the fracture resistance, fracture mode and strain of root filled molar teeth. METHODOLOGY: Seventy mandibular human molar teeth were divided into seven groups (n = 10), one control (sound teeth) and six experimental groups resulting from the interaction between the two study factors: post system (Pa, post absence; Gfp, glass fibre post; Cmp, cast Ni-Cr alloy post and core) and amount of remaining coronal tooth tissue (Fe, 2 mm of ferrule; NFe, no ferrule). Teeth in the experimental groups were restored with metal crowns. For the strain gauge test, two strain gauges per sample were attached on the buccal and proximal root surfaces, and the samples of each group (n = 5) were submitted to a load of 0-100N. Fracture resistance (N) was assessed in a mechanical testing device (n = 10). Strain gauge and fracture resistance data were analysed by two-way anova (3 × 2) followed by the Tukey's HSD and Duncan's test (α = 0.05). The failure mode was evaluated using an optical stereomicroscope and classified according to the location of the failure. RESULTS: The absence of ferrule was associated with lower fracture resistance regardless of the post system. Groups restored with glass fibre post and cast Ni-Cr alloy post and core had similar fracture resistance and higher values than groups without posts, regardless of the remaining coronal tooth tissue. Teeth with no ferrule and cast Ni-Cr alloy post and core resulted in catastrophic fractures and those with no ferrule and glass fibre post or no ferrule and post absence resulted in restorable failures. Buccal strain was higher in sound teeth and lower in teeth without posts. Glass fibre post insertion decreased the buccal strain compared to the teeth with ferrule and absence of post. CONCLUSIONS: Two millimetre of ferrule had a significant influence on cusp strain, fracture resistance and failure mode. The glass fibre post was as effective as the cast Ni-Cr alloy post and core in the restoration of root filled molars regardless of the remaining tooth tissue. Absence of a post decreased the fracture resistance and increased the cusp strain.

Effect of ozone application on the resin-dentin microtensile bond strength.

When ozone is used during caries treatment, bond strength can be compromised by the release of oxygen. The use of antioxidant agents neutralizes the free oxygen. The aim of this study was to evaluate the effects of ozone and sodium ascorbate on resin-dentin microtensile bond strength (µTBS). Forty human third molars were divided into four groups: Group 1, not treated with ozone; Group 2, ozone application followed by acid etching; Group 3, acid etching followed by ozone application; and Group 4, ozone and application of sodium ascorbate. Bonded beams (1.0 mm(2)) were tested under tension (0.5 mm min(-1)). The µTBS values were analyzed using one-way analysis of variance (ANOVA) and the Tukey test (p=0.05). All beams that fractured were analyzed under stereomicroscopy (40×). Group 1 had significantly higher µTBS values than Group 2 or 3. The µTBS values of Groups 1 and 4 were similar and higher than those of Group 2. The use of ozone in Group 2 resulted in lower values of µTBS in all conditions evaluated. The predominant failure mode was adhesive. The application of ozone decreased the µTBS of the dentin-composite resin interface. These values were reversed when compared with Groups 1 and 2 when sodium ascorbate was used.

Characterization of inflammatory cell infiltrate in human dental pulpitis.

INTRODUCTION: To evaluate the microscopic characteristics and densities (per mm(2) ) of tryptase(+) mast cells, CD4(+) T helper lymphocytes, CD45RO(+) memory T lymphocytes, foxp3(+) T regulatory lymphocytes, CD20(+) B lymphocytes, CD68(+) macrophages, and CD31(+) blood vessels in human dental pulpitis (n=38) and healthy pulpal tissue (n=6). METHODOLOGY: The pulps of 38 human teeth with a clinical diagnosis of irreversible pulpitis were removed by pulpectomy. The pulp tissue was immersed in 10% buffered formalin for evaluation using light microscopy. Tryptase, CD4, CD45RO, foxp3, CD20, CD68, and CD31 expressions were analysed using immunohistochemistry; other microscopic features, such as intensity of inflammatory infiltrate and collagen deposition, were evaluated using haematoxylin and eosin stain. Wilcoxon and Mann-Whitney tests were used for statistical analysis. The significance level was set at α=5%. RESULTS: Two microscopic patterns of pulpitis were found: group 1 (G1) (n=15) had an intense inflammatory infiltrate and mild collagen deposition; conversely, group 2 (G2) (n=23) had a scarce inflammatory infiltrate and intense collagen deposition. The numbers of CD68(+) macrophages (P=0.004) and CD20(+) B (P=0.068) lymphocytes and the density of blood vessels (P=0.002) were higher in G1 than in G2. However, a similar number of CD4(+) and CD45RO(+) T lymphocytes was found in both groups (P>0.05). When present, tryptase(+) mast cells were equally distributed in G1 and G2, whereas foxp3(+) T regulatory lymphocytes were detected in 59% and 14% of the samples of G1 and G2. Controls exhibited lower numbers of foxp3, tryptase, CD4, CD45RO, CD68 and CD20 positive cells than G1 and G2. CONCLUSIONS: Irreversible pulpitis had distinct microscopic features with important quantitative and qualitative differences in inflammatory cell infiltration.

Reliability and validity of two software systems used to measure the pharyngeal airway space in three-dimensional analysis.

The aim of this study was to test the reliability and validity of two software systems used to measure the pharyngeal airway space three-dimensionally. A sample of 40 cone beam computed tomography images from adult patients was taken from a database. The cone beam computed tomography images were analysed by InVivoDental and Dolphin 3D software systems by two calibrated examiners. Three nasopharynx and oropharynx prototypes were used as a reference standard to validate the software systems. The volume, minimum area and minimum area localization were the measurements tested. Measurements were compared using a paired t-test; correlated using Pearson's correlation and linear regression. Bland-Altman analysis was also used. We found significant differences in the oropharynx volume (P=0.002) and nasopharynx minimum area localization (P=0.009). The Dolphin 3D software presented higher-volume values than the ones found in the prototype, while the InVivoDental software presented lower values. Strong (r>0.7; P>0.001) or very strong (r>0.9; P>0.001) correlations were observed between the software systems. Bland-Altman analysis found good agreement between prototypes and the software systems. The measurements obtained from the Dolphin 3D and InVivoDental software systems are both reliable, strongly correlated, but should not be assumed as equal. Dolphin 3D software overestimates the nasopharynx and oropharynx volumes, while the InVivoDental software underestimates them.

Persistent apical periodontitis associated with a calcifying odontogenic cyst.

AIM: To report a case of calcifying odontogenic cyst (COC) that was suggestive of apical periodontitis adjacent to the roots of the maxillary incisor teeth. SUMMARY: Tooth 21 presented with clinical and radiographic signs of secondary infection, a post within the root canal and substantial internal tooth destruction; it was scheduled for endodontic surgery. Teeth 12 and 22 were root filled following the placement of a calcium hydroxide intracanal dressing for 21 days. Three attempts at root canal disinfection in tooth 11 were unsuccessful, and a persistent purulent drainage precluded completion of root canal treatment. Surgical enucleation of the periapical lesion was undertaken and the tissues submitted for histopathological examination. A diagnosis of COC was established based on the microscopic analysis. COC is an unusual benign lesion that represents 2% of all odontogenic lesions. Depending on the stage of development, it can mimic a large lesion associated with apical periodontitis and should therefore be considered in the differential diagnosis. In the case of COC, the definitive diagnosis can only be made with histopathological analysis. KEY LEARNING POINTS: Persistent apical periodontitis may be of nonendodontic origin. * Histological examination is essential to establish the cause of persistent apical periodontitis. * Calcifying odontogenic cyst can mimic apical periodontitis.

Two methods to evaluate the antimicrobial action of calcium hydroxide paste.

The objective of this study was to analyze two methods for determining the antimicrobial effectiveness of (i) calcium hydroxide plus saline, (ii) calcium hydroxide plus polyethylene glycol, and (iii) calcium hydroxide plus camphorated paramonochlorophenol. Four microorganisms (Staphylococcus aureus (ATCC 6538), Enterococcus faecalis (ATCC 29212), Pseudomonas aeruginosa (ATCC 27853), and Bacillus subtilis (ATCC 6633)), one yeast (Candida albicans (ICB/USP-562)), and one mixture of these organisms were used. The strains were inoculated in Brain Heart Infusion (BHI) and incubated at 37 degrees C for 24 h. Two methods, the direct exposure test and the agar diffusion test were used to evaluate antimicrobial effects. For the direct exposure test (DET) 288 paper points were contaminated with the standard microbial suspensions and exposed to the intracanal dressings for 1, 24, 48, and 72 h. The points were immersed in Letheen Broth, followed by incubation at 37 degrees C for 48 h. An inoculum of 0.1 ml obtained from Letheen Broth was then transferred to 7 ml of BHI under identical incubation conditions, and microbial growth was evaluated. Pastes showed activity between 1 and 72 h, depending on the microorganism/mixture tested. For the agar diffusion test 36 Petri plates with 20 ml of BHI agar were inoculated with 0.1 ml of the same microbial suspension used for the DET, using sterile swabs that were spread on the medium. Five cavities were made in each of two agar plates (total = 10) and completely filled with one of the calcium hydroxide pastes. The plates were preincubated for 1 h at environmental temperature and then incubated at 37 degrees C for 24 to 48 h. The inhibition zone around each well was recorded in millimeters, and the results were submitted to ANOVA and Tukey test (alpha = 0.05). All intracanal dressings induced inhibition zones (range 5.0-10.0 mm). Data obtained showed that both the DET and agar diffusion test are useful in establishing the calcium hydroxide antimicrobial spectrum, thus improving infection control protocols. The direct exposure method is independent of other variables and is a practical laboratory procedure. A complete antimicrobial effect was observed after 48 h on indicator microorganisms, in both tests, irrespective of the calcium hydroxide paste vehicle.

In vitro determination of direct antimicrobial effect of calcium hydroxide.

The objective of this study was to determine in vitro the time required for calcium hydroxide in direct contact with microorganisms to express its antimicrobial effect. The microorganisms used were: Micrococcus luteus (ATCC-9341), Staphylococcus aureus (ATCC-6538), Fusobacterium nucleatum (ATCC-25586), Pseudomonas aeruginosa (ATCC-27853), Escherichia coli, and Streptococcus sp. The strains were cultivated in Brain Heart Infusion (BHI), with the exception of F. nucleatum (BHI-PRAS). Pure and mixed suspensions of the microorganisms were prepared. Paper cones immersed in these substances were covered with calcium hydroxide paste, and after 0, 1, 2, 6, 12, 24, 48, and 72 h and 7 days they were transferred to an appropriate medium to observe the growth and multiplication of the microorganisms. Incubation was conducted at 37 degrees C for 48 h, according to the requirements of oxygen of each microorganism. The antimicrobial effect of calcium hydroxide was shown to occur after 12 h on M. luteus and F. nucleatum, 24 h on Streptococcus sp, 48 h on E. coli, and 72 h on S. aureus and P. aeruginosa. Mixture II (M. luteus + Streptococcus sp + S. aureus) was sensitive to calcium hydroxide antimicrobial potential after 48 h, whereas mixture I (M. luteus + E. coli + P. aeruginosa), mixture III (E. coli + P. aeruginosa), and mixture IV (S. aureus + P. aeruginosa) were inactivated after 72 h of exposure.

Antimicrobial evaluation of calcium hydroxide in infected dentinal tubules.

The objective of this study was to evaluate the antimicrobial activity of calcium hydroxide in infected dentinal tubules. Four microorganisms, strains of ATCC (Streptococcus faecalis (ATCC-29212), Staphylococcus aureus (ATCC-6538), Bacillus subtilis (ATCC-6633), and Pseudomonas aeruginosa (ATCC-27853)) and one mixture of these were used. These strains were inoculated in brain heart infusion (BHI) and incubated at 37 degrees C for 24 h. Sixty-three human maxillary central incisors were prepared and sterilized by autoclaving. Five groups of 12 teeth each were contaminated for 28 days using new 24-h cultures every 72 h, prepared and adjusted to tube 2 of the MacFarland scale (6 x 10(8) cells/ml). Root canals were then irrigated with 5 ml of saline, dried, and completely filled with calcium hydroxide paste. At intervals of 0, 48, and 72 h, and 7 days, dressings were removed and teeth were immersed in 5 ml of BHI and incubated at 37 degrees C for 48 h to observe the growth and multiplication of the microorganisms. Three uninoculated teeth were maintained in a humid environment as an aseptic control. These teeth were immersed in BHI and maintained at 37 degrees C for 7 days to determine microbial growth. Bacterial growth was shown by turbidity of the culture medium and confirmed by seeding these broths on BHI agar at 37 degrees C for 24 h. The positive BHI tubes were selected, and inoculum was spread on the surface of BHI agar, followed by the same incubation conditions. Gram stain was conducted from BHI growth and from colonies growing on solid medium. Calcium hydroxide in infected dentinal tubules showed no antimicrobial effect on S. faecalis, S. aureus, B. subtilis, P. aeruginosa, or on the bacterial mixture used throughout the experiment.

Treatment of middle-apical level root fracture in necrotic teeth.

The purpose of this paper is to present two case reports of dental trauma with middle-apical level root fractures and pulp necrosis. The treatment consisted of programmed applications of calcium hydroxide until a calcified barrier was formed at the fracture level. The technique presented here proved efficient in treating horizontal fractures at the middle and apical thirds of the root.

Chemical analysis of the formation of calcium carbonate and its influence on calcium hydroxide pastes in connective tissue of the dog--Part II.

The objective of this research was to chemically analyze calcium hydroxide pastes added to three hydrosoluble vehicles having different acid-base characteristics by implanting polyethylene tubes in subcutaneous connective tissue in dogs, evaluating the formation of calcium carbonate over a period of 7, 30, 45, and 60 days. The three vehicles were saline, anesthetic, and polyethylene glycol 400. Determination of the formation of calcium carbonate was evaluated by volumetry of neutralization using hydrochloric acid for titration.

Chemical analysis of the liberation of calcium and hydroxyl ions from calcium hydroxide pastes in connective tissue in the dog--Part I.

The objective of this research is to chemically analyze calcium hydroxide pastes added to three hydrosoluble vehicles having different acid-base characteristics using polyethylene tubes implanted in subcutaneous connective tissue in a dog, evaluating the liberation of calcium and hydroxyl ions over a period of 7, 30, 45 and 60 days. The three vehicles were saline, anesthetic, and polyethylene glycol 400. Chemical analysis of the liberated calcium ions was done by means of conductimetry using EDTA for titration. Liberation of hydroxyl ions was determined by analogy of calcium ions liberated, which are in direct proportion to the molecular weight of calcium hydroxide.

Antimicrobial and chemical study of MTA, Portland cement, calcium hydroxide paste, Sealapex and Dycal.

The objective of this study was to investigate the antimicrobial action of mineral trioxide aggregate (MTA), Portland cement, calcium hydroxide paste (CHP), Sealapex and Dycal. The chemical elements of MTA and two Portland cements were also analyzed. Four standard bacterial strains: Staphylococcus aureus (ATCC 6538), Enterococcus faecalis (ATCC 29212), Pseudomonas aeruginosa (ATCC 27853), Bacillus subtilis (ATCC 6633), one wild fungus, Candida albicans (ICB/USP-562), and one mixture of these were used. Thirty Petri plates with 20 ml of BHI agar were inoculated with 0.1 ml of the experimental suspensions. Three cavities, each one measuring 4 mm in depth and 4 mm in diameter, were made in each agar plate using a copper coil and then completely filled with the product to be tested. The plates were pre-incubated for 1 h at environmental temperature followed by incubation at 37 degrees C for 48 h. The diameters of the zones of microbial inhibition were then measured. Samples from diffusion and inhibition halos were extracted from each plate and immersed in 7 ml BHI broth and incubated at 37 degrees C for 48 h. Analyses of chemical elements present in MTA and in two samples of Portland cement were performed with a fluorescence spectrometer Rx. The results showed that the antimicrobial activity of CHP was superior to those of MTA, Portland cement, Sealapex and Dycal, for all microorganisms tested, presenting inhibition zones of 6-9.5 mm and diffusion zones of 10-18 mm. MTA, Portland cement, and Sealapex presented only diffusion zones and among these, Sealapex produced the largest zone. Dycal did not show inhibition or diffusion zones. Portland cements contain the same chemical elements as MTA except that MTA also contains bismuth.

Effect of vehicle on antimicrobial properties of calcium hydroxide pastes.

The current discussion about the importance of intracanal dressings and the effect of vehicles on calcium hydroxide pastes is justified by controversy concerning the achievement of complete disinfection after preparation of infected root canals and the real antimicrobial effect of these vehicles. The aim of this study is to investigate the role of vehicles in the antimicrobial effect of calcium hydroxide pastes. Well-conducted research about the characteristics of calcium hydroxide, such as antimicrobial potential, physico-chemical aspects and histocompatibility, gives credibility to the choice of this medication in several clinical situations. Different vehicles have been added to calcium hydroxide in an attempt to enhance its properties. Scientific reasoning indicates the use of hydrosoluble vehicles (distilled water, saline) associated with calcium hydroxide because of their chemical characteristics of dissociation, diffusibility and filling capability which are decisive for the biological behavior, i.e., antimicrobial qualities and induction of tissue repair.

Radicular grooves in maxillary lateral incisor: case report.

The authors present a case report of a radicular groove in a maxillary lateral incisor in a 58-year old male patient. Endodontic and periodontal treatment was not carried out and therefore, avulsion of the tooth was indicated. The radicular grooves were very deep with pulp chamber communication.

Assessment of the apical transportation of root canals using the method of the curvature radius.

The purpose of this investigation was to evaluate the occurrence of apical transportation after root canal instrumentation using only K-Flexofiles or K-Flexofiles intercalated with K-Flexofile Golden Mediums. For this purpose, the degree (Schneider's method) and the radius of the curvature was recorded before and after instrumentation. The results showed that there was no statistically significant difference between the techniques. The correlation between the degree and the radius of curvature of the root canal was not consistent, nor was there a relationship between the original radius of curvature and the apical transportation. However, determination of curvature by use of its radius has proved to be an effective method.