Application of 2D NMR Spectroscopy in Combination with Chemometric Tools for Classification of Natural Lignins.

Lignin is considered a promising renewable source of valuable chemical compounds and a feedstock for the production of various materials. Its suitability for certain directions of processing is determined by the chemical structure of its macromolecules. Its formation depends on botanical origin, isolation procedure and other factors. Due to the complexity of the chemical composition, revealing the structural differences between lignins of various origins is a challenging task and requires the use of the most informative methods for obtaining and processing data. In the present study, a combination of two-dimensional nuclear magnetic resonance (2D NMR) spectroscopy and multivariate analysis of heteronuclear single quantum coherence (HSQC) spectra is proposed. Principal component analysis and hierarchical cluster analysis techniques demonstrated the possibility to effectively classify lignins at the level of belonging to classes and families of plants, and in some cases individual species, with an error rate for data classification of 2.3%. The reverse transformation of loading plots into the corresponding HSQC loading spectra allowed for structural information to be obtained about the latent components of lignins and their structural fragments (biomarkers) responsible for certain differences. As a result of the analysis of 34 coniferous, deciduous, and herbaceous lignins, 10 groups of key substructures were established. In addition to syringyl, guaiacyl, and p-hydroxyphenyl monomeric units, they include various terminal substructures: dihydroconiferyl alcohol, balanopholin, cinnamic acids, and tricin. It was shown that, in some cases, the substructures formed during the partial destruction of biopolymer macromolecules also have a significant effect on the classification of lignins of various origins.

Determination of Pentacyclic Triterpenoids in Plant Biomass by Porous Graphitic Carbon Liquid Chromatography-Tandem Mass Spectrometry.

Pentacyclic triterpenoids (PCTs), which possess a number of bioactive properties, are considered one of the most important classes of secondary plant metabolites. Their chromatographic determination in plant biomass is complicated by the need to separate a large number of structurally similar compounds belonging to several classes that differ greatly in polarity (monools, diols, and triterpenic acids). This study proposes a rapid, sensitive, and low-cost method for the simultaneous quantification of ten PCTs (3ß-taraxerol, lupeol, ß-amyrin, α-amyrin, betulin, erythrodiol, uvaol, betulinic, oleanolic, and ursolic acids) by high-performance liquid chromatography-tandem mass spectrometry (HPLC-MS/MS) using porous graphitic carbon (Hypercarb) as a stationary phase capable of hydrophobic retention and specific interactions with analytes. Revealing the effects of the mobile phase composition, pH, ionic strength, and column temperature on retention and selection of chromatographic conditions on this basis allowed for the effective separation of all target analytes within 8 min in gradient elution mode and attaining limits of detection in the range of 4-104 µg L-1. The developed method was fully validated and successfully tested in the determination of PCTs in common haircap (Polytrichum commune) and prairie sphagnum (Sphagnum palustre) mosses, and fireweed (Chamaenerion angustifolium) stems and leaves.

Analysis of Softwood Lignans by Comprehensive Two-Dimensional Liquid Chromatography.

Lignans constitute a large group of phenolic plant secondary metabolites possessing high bioactivity. Their accurate determination in plant extracts with a complex chemical composition is challenging and requires advanced separation techniques. In the present study, a new approach to the determination of lignans in coniferous knotwood extracts as the promising industrial-scale source of such compounds based on comprehensive two-dimensional liquid chromatography separation and UV spectrophotometric detection is proposed. First and second-dimension column screening showed that the best results can be obtained using a combination of non-polar and polar hydroxy group embedded octadecyl stationary phases with moderate (~40%) "orthogonality". The optimization of LC × LC separation conditions allowed for the development of a new method for the quantification of the five lignans (secoisolariciresinol, matairesinol, pinoresinol, 7-hydroxymatairesinol, and nortrachelogenin) in knotwood extracts with limits of quantification in the range of 0.27-0.95 mg L-1 and a linear concentration range covering at least two orders of magnitude. Testing the developed method on coniferous (larch, fir, spruce, and pine) knotwood extracts demonstrated the high selectivity of the analysis and the advantages of LC × LC in the separation and accurate quantification of the compounds co-eluting in one-dimensional HPLC.

Fractionation of Arctic Brown Algae (Fucus vesiculosus) Biomass Using 1-Butyl-3-methylimidazolium-Based Ionic Liquids.

Arctic brown algae are considered a promising industrial-scale source of bioactive sub-stances as polysaccharides, polyphenols, and low-molecular secondary metabolites. Conventional technologies for their processing are focused mainly on the isolation of polysaccharides and involve the use of hazardous solvents. In the present study a "green" approach to the fractionation of brown algae biomass based on the dissolution in ionic liquids (ILs) with 1-butil-3-methylimidazolium (bmim) cation with further sequential precipitation of polysaccharides and polyphenols with acetone and water, respectively, is proposed. The effects of IL cation nature, temperature, and treatment duration on the dissolution of bladderwrack (Fucus vesiculosus), yields of the fractions, and their chemical composition were studied involving FTIR and NMR spectroscopy, as well as size-exclusion chromatography and monosaccharide analysis. It was shown that the use of bmim acetate ensures almost complete dissolution of plant material after 24 h treatment at 150 °C and separate isolation of the polysaccharide mixture (alginates, cellulose, and fucoidan) and polyphenols (phlorotannins) with the yields of ~40 and ~10%, respectively. The near-quantitative extraction of polyphenolic fraction with the weight-average molecular mass of 10-20 kDa can be achieved even under mild conditions (80-100 °C). Efficient isolation of polysaccharides requires harsh conditions. Higher temperatures contribute to an increase in fucoidan content in the polysaccharide fraction.

New Insights into the Thermal Stability of 1-Butyl-3-methylimidazolium-Based Ionic Liquids.

One of the most promising applications of ionic liquids (ILs) with 1-butyl-3-methylimidazolium (bmim) cation is based on their unique ability to dissolve and fractionate lignocellulosic biomass, allowing for the development of green biorefining technologies. A complete dissolution of lignocellulose requires prolonged treatment at elevated temperatures, which can cause the partial degradation of ILs. In the present study, a combination of various analytical techniques (GC-MS, HPLC-HRMS, 2D-NMR, synchronous thermal analysis) was used for the comprehensive characterization of bmim acetate, chloride, and methyl sulfate degradation products formed at 150 °C during 6- and 24-h thermal treatment. A number of volatile and non-volatile products, including monomeric and dimeric alkyl substituted imidazoles, alcohols, alkyl amines, methyl and butyl acetates, and N-alkylamides, was identified. By thermal lability, ILs can be arranged in the following sequence, coinciding with the decrease in basicity of the anion: [bmim]OAc > [bmim]Cl > [bmim]MeSO4. The accumulation of thermal degradation products in ILs, in turn, affects their physico-chemical properties and thermal stability, and leads to a decrease in the decomposition temperature, a change in the shape of the thermogravimetric curves, and the formation of carbon residue during pyrolysis.

Screening and semi-quantitative determination of pentacyclic triterpenoids in plants by liquid chromatography-tandem mass spectrometry in precursor ion scan mode.

INTRODUCTION: Pentacyclic triterpenoids (PCTs) are secondary plant metabolites. They are of exceptional interest as biologically active substances and raw materials for a wide range of medications. Thus, the development of a methodology for rapid screening of PCTs in plant biomass is an important task. OBJECTIVE: The goal of this work was to develop an approach for simultaneous screening and semi-quantitative determination of PCTs in plant tissues by liquid chromatography-tandem mass spectrometry with a precursor ion scan (PrecIS). MATERIALS AND METHODS: Pressurised liquid extraction (PLE) with methanol was used for the isolation of PCTs from plant biomass. Screening and semi-quantitative determination of PCTs in the obtained extracts were carried out by reversed phase high-performance liquid chromatography-tandem mass spectrometry in a PrecIS mode. RESULTS: The product ion at m/z 95 with collision energy of 40 V was used as a diagnostic ion to identify PCTs by the PrecIS mode. In plant materials, 26 PCTs and their derivatives, such as PCTs esters and glycosides, were detected and identified. Calculation of the relative response factor for nine available PCTs showed that using a betulin calibration curve allows us to estimate the semi-quantitative content of PCTs and their derivatives in plant PLE extracts. CONCLUSION: The developed approach can be applied for simultaneous untargeted screening and semi-quantitative determination of PCTs and their derivatives in various plants at sub-parts per million levels.

Characterization of Ionic Liquid Lignins Isolated from Spruce Wood with 1-Butyl-3-methylimidazolium Acetate and Methyl Sulfate and Their Binary Mixtures with DMSO.

Ionic liquids (ILs) based on 1-butyl-3-methylimidazolium (bmim) cation have proved to be promising solvents for the fractionation of plant biomass with the production of cellulose and lignin. This study deals with the characterization of lignins isolated from coniferous (spruce) wood using [bmim]OAc and [bmim]MeSO4 ionic liquids and their binary mixtures with DMSO (80:20). Molecular weight distributions, functional composition, and structural features of IL lignins were studied by size-exclusion chromatography, NMR spectroscopy (1D and 2D) and atmospheric pressure photoionization high-resolution mass spectrometry. It was shown that the interaction of ILs with lignin leads to significant chemical changes in the biopolymer; a decrease in the degree of polymerization and in the content of free phenolic hydroxyl groups due to alkylation, the disappearance (in the case of [bmim]OAc) of carbonyl groups and a significant destruction of ß-O-4 bonds. The chemical reactions between lignin and 1-butyl-3-methylidazolium cation with covalent binding of ionic liquids or products of their decomposition is evidenced by the presence of a large number of nitrogen-containing oligomers in IL lignins.

Polycommunin A, a dihydrocinnamoyl bibenzyl isolated from the moss Polýtrichum commúne, and its antioxidant activity.

A novel polyphenolic compound named Polycommunin A (1) was discovered in the aerial part of the common haircap moss (Polýtrichum commune) widely spread in boreal and temperate climate zones. Aqueous ethanol and extraction of the plant material with further isolation of polyphenolic fraction and preparative HPLC separation allowed obtaining individual compound and identifying it as dimeric dihydrocinnamoyl bibenzyl by NMR spectroscopy and high-resolution tandem mass spectrometry. Polycommunin A demonstrated high in vitro antioxidant activity determined by FRAP and PCL assays and comparable to that of Trolox and Quercetin.

Comprehensive Characterization of Secondary Metabolites in Fruits and Leaves of Cloudberry (Rubus chamaemorus L.).

Cloudberry (Rubus chamaemorus L.) is a circumpolar boreal plant rich in bioactive compounds and is widely used in food and in folk medicine. In this study, a combination of two-dimensional NMR spectroscopy and liquid chromatography-high-resolution mass spectrometry was used for the comprehensive characterization of secondary metabolites in cloudberry lipophilic and hydrophilic extracts. Special attention was paid to the leaf extractives, which are highly enriched in polyphenolic compounds, the content of which reaches 19% in the extract (in gallic acid equivalent). The chemical composition of the polyphenolic fraction is represented mainly by the glycosylated derivatives of flavonoids, hydroxycinnamic (primarily caffeic), gallic (including the structure of galloyl ascorbate) and ellagic acids, catechin, and procyanidins. The contents of aglycones in the polyphenolic fraction were 64 and 100 mg g-1 for flavonoids and hydroxycinnamic acids, respectively, while the content of free caffeic acid was 1.2 mg g-1. This determines the exceptionally high antioxidant activity of this fraction (750 mg g-1 in gallic acid equivalent) and the ability to scavenge superoxide anion radicals, which is 60% higher than that of Trolox. The lower polar fractions consist mainly of glycolipids, which include polyunsaturated linolenic acid (18:3), pentacyclic triterpenic acids, carotenoid lutein, and chlorophyll derivatives, among which pheophytin a dominates. Along with the availability, the high antioxidant and biological activities of cloudberry leaf extracts make them a promising source of food additives, cosmetics, and pharmaceuticals.

Comment on Kraft Process─Formation of Secoisolariciresinol Structures and Incorporation of Fatty Acids in Kraft Lignin.

This paper presents comments on the recently published article by Lahtinen et al., showing results about study the chemical structure of insoluble residual lignin, the presence of fatty acids in kraft lignin, and the origin of the secoisolariciresinol fragment. The analytical procedures used in the study seem to be reliable. However, in my opinion, the authors made mistakes when interpreting the heteronuclear single-quantum correlation (HSQC) nuclear magnetic resonance data; therefore, their conclusions require discussion. Here, an alternative interpretation of some of the results is proposed. In my opinion, the identification of lignin structural fragments from the literature data is a critical step for many studies. Therefore, the introduction of criteria for evaluating the accuracy of identification of lignin structural fragments according to HSQC spectra will significantly affect the scientific context of the structural correctness of subsequent studies of the lignin structure.

Features of the Chemical Composition and Structure of Birch Phloem Dioxane Lignin: A Comprehensive Study.

Understanding the chemical structure of lignin in the plant phloem contributes to the systematics of lignins of various biological origins, as well as the development of plant biomass valorization. In this study, the structure of the lignin from birch phloem has been characterized using the combination of three analytical techniques, including 2D NMR, Py-GC/MS, and APPI-Orbitrap-HRMS. Due to the specifics of the phloem chemical composition, two lignin preparations were analyzed: a sample obtained as dioxane lignin (DL) by the Pepper's method and DL obtained after preliminary alkaline hydrolysis of the phloem. The obtained results demonstrated that birch phloem lignin possesses a guaiacyl-syringyl (G-S) nature with a unit ratio of (S/G) 0.7-0.9 and a higher degree of condensation compared to xylem lignin. It was indicated that its macromolecules are constructed from ß-aryl ethers followed by phenylcoumaran and resinol structures as well as terminal groups in the form of cinnamic aldehyde and dihydroconiferyl alcohol. The presence of fatty acids and flavonoids removed during alkaline treatment was established. Tandem mass spectrometry made it possible to demonstrate that the polyphenolic components are impurities and are not incorporated into the structure of lignin macromolecules. An important component of phloem lignin is lignin-carbohydrate complexes incorporating xylopyranose moieties.

Comparative study of four Yucca species by 2D-NMR and LC-MS.

The present study was conducted to compare leaf extracts of Y. gloriosa, Y. treculeana, Y. filamentosa and Y. aloifolia. Plant extracts were obtained by sequential extraction with 50% and 100% methanol using the pressurized liquid extraction method. General comparative analysis of Yucca extracts was performed by 2 D-NMR. The presence of various biologically active components in the extracts was shown, among which steroid saponins predominate. The use of LC-MS and LC-HRMS methods with electrospray ionization made it possible to conduct a comparative analysis of Yucca steroidal saponins. The 33 steroidal saponins of various structures were found. The presence of three characteristic saponins in all Yucca species was shown: yuccaloeside C, yuccaloeside E and yuccaloeside B. The results obtained can be used to control the quality of plant materials and products.

Comprehensive Characterization of Chemical Composition and Antioxidant Activity of Lignan-Rich Coniferous Knotwood Extractives.

A knotwood of coniferous trees containing large amounts of polyphenolic extractives is considered a promising industrial-scale source of lignans possessing antioxidant properties and other bioactivities. The present study is aimed at a detailed characterization of the chemical composition and antioxidant activity of lignan-rich extractives obtained from the knotwood of the Norway spruce, Scotch pine, Siberian fir, and Siberian larch growing in the European North of Russia as a region with a highly developed forest industry. To achieve this, a comprehensive approach based on a combination of two-dimensional NMR spectroscopy with high-performance liquid chromatography-high-resolution Orbitrap mass spectrometry, and the determination of antioxidant activity by the three complementary methods were proposed. The studied knotwood samples contained from 3.9 to 17% of extractive substances and were comparable to Trolox's antioxidant activity in the single-electron transfer processes and superoxide radical scavenging, which is associated with the predominance of polyphenolic compounds. The latter was represented by 12 tentatively identified monolignans and 27 oligolignans containing 3-5 phenylpropane units in their structure. The extracts were characterized by an identical set of lignans and differed only in the ratios of their individual compounds. Other components of the knotwood were flavonoids taxifolin, quercetin (Siberian larch), and three stilbenes (pinosylvin, its methyl ester, and pterostilbene), which were identified in the Scotch pine extractives. Sesquiterpene juvabione and its derivatives were found in extracts of Siberian larch knotwood.

Supercritical Fluid Chromatography-Tandem Mass Spectrometry for Rapid Quantification of Pentacyclic Triterpenoids in Plant Extracts.

Pentacyclic triterpenoids (PCTs) are a widely distributed class of plant secondary metabolites. These compounds have high bioactive properties, primarily antitumor and antioxidant activity. In this study, a method was developed for the quantitative analysis of pentacyclic triterpenoids in plants using supercritical fluid chromatography-tandem mass spectrometry (SFC-MS/MS). Separation of ten major PCTs (friedelin, lupeol, ß-amyrin, α-amyrin, betulin, erythrodiol, uvaol, betulinic, oleanolic and ursolic acids) was studied on six silica-based reversed stationary phases. The best results (7 min analysis time in isocratic elution mode) were achieved on an HSS C18 SB stationary phase using carbon dioxide-isopropanol (8%) mobile phase providing decisive contribution of polar interactions to the retention of analytes. It was shown that the use of atmospheric pressure chemical ionization (APCI) is preferred over atmospheric pressure photoionization (APPI). The combination of SFC with APCI-MS/MS mass spectrometry made it possible to achieve the limits of quantification in plant extracts in the range of 2.3-20 µg·L-1. The developed method was validated and tested in the analyses of birch outer layer (Betula pendula) bark, and licorice (Glycyrrhiza glabra) root, as well as lingonberry (Vaccinium vitis-idaea), cranberry (Vaccinium oxycoccos), apple (Malus domestica "Golden Delicious" and Malus domestica "Red Delicious") peels.

New Oligomeric Dihydrochalcones in the Moss Polytrichum commune: Identification, Isolation, and Antioxidant Activity.

One of the most widespread representatives of mosses in the temperate and boreal latitudes of the Northern Hemisphere is common haircap (Polytrichum commune), which is known as the largest moss in the world and widely used in traditional herbal medicine. Polyphenolic compounds constitute one of the most important groups of biologically active secondary metabolites of P. commune, however, the available information on their chemical composition is still incomplete and contradictory. In the present study, a group of dihydrochalcone polyphenolic derivatives that were not previously found in mosses was isolated from P. commune biomass using pressurized liquid extraction with aqueous acetone. The combination of two-dimensional NMR spectroscopy and high-performance liquid chromatography-high-resolution mass spectrometry allowed for identifying them as 3-hydroxyphloretin oligomers formed through a carbon-carbon bond between phloroglucinol and pyrocatechol moieties ("head-to-tail" coupling), with a polymerization degree of 2-5. The individual compounds isolated by preparative reverse-phase HPLC had a purity of 71 to 97% and demonstrated high radical scavenging activity (17.5-42.5% with respect to Trolox) determined by the photochemiluminescence method. Along with the low toxicity predicted by QSAR/QSTR algorithms, this makes 3-hydroxyphloretin oligomers a promising source for the production of biologically active food additives and pharmaceuticals.

Analysis of the functional group composition of the spruce and birch phloem lignin.

In this article, the functional group composition of the spruce (Pícea ábies) and birch (Bétula péndula) phloem lignin is described. The features of the chemical structure were studied by analyzing dioxane lignin using the elemental analysis, UV-Vis, FT-IR, and 1D NMR spectroscopy. For comparison, samples of xylem dioxane lignin isolated from the corresponding wood species were also analyzed. FT-IR spectroscopy data suggest that the lignins of birch phloem and xylem are similar in chemical structure. However, there are differences in absorption bands in the spectra of spruce dioxane lignin, which indicate the opposite. Quantitative analysis of the functional group composition was performed using 13C and 31P NMR data. It was found that free phenolic hydroxyl groups of catechol and p-hydroxyphenyl types are dominated in the composition of spruce phloem lignin. Birch phloem lignin has a qualitative and quantitative composition of functional groups characteristic of hardwood lignins. However, the content of G-units is greater than S-units, in contrast to the birch xylem lignin, where S-units predominate. The revealed differences are relevant from the point of view of plant physiology. The practical significance of the study is connected with understanding the reactivity of lignins when considering the chemical processing of tree bark.

Structural characterization of the lignin from Saxifraga (Saxifraga oppositifolia L.) stems.

As a renewable source of unique aromatic compounds, lignin attracts the attention of many researchers. However, for its successful application, it is necessary to have a clear and accurate idea of its chemical structure. Therefore, it is necessary to expand knowledge about the structure of lignins of various nature using the informative analytical methods. The aim of this study was to characterize the dioxane lignin of the Saxifraga oppositifolia L. - the northernmost angiosperm. The lignin of plants growing in the Arctic zone may differ significantly from other plants, both due to species differences and peculiarities of growing conditions. Studies were conducted on an isolated lignin preparation obtained by the Pepper's method. Analysis of Py-GC/MS data and NMR spectroscopy showed that saxifrage lignin belongs to GH-type. This is evidenced by a significant proportion of p-hydroxyphenyl units (40%), while the content of syringyl units is about 14%. The major substructures of the studied lignin were ß-aryl ether, phenylcoumaran, and resinol. It was found that the γ­carbon of the lignin side chains are partly acetylated, and forms ester bonds with the p-hydroxybenzoate structure. In addition, the NMR spectrum showed a signal of the phenylglycoside evidenced the presence of the lignin-carbohydrate complex.