RESUMEN
Oxidation self-charging batteries have emerged with the demand for powering electronic devices around the clock. The low efficiency of self-charging has been the key challenge at present. Here, a more efficient autoxidation self-charging mechanism is realized by introducing hemoglobin (Hb) as a positive electrode additive in the polyaniline (PANI)-zinc battery system. The heme acts as a catalyst that reduces the energy barrier of the autoxidation reaction by regulating the charge and spin state of O2. To realize self-charging, the adsorbed O2 molecules capture electrons of the reduced (discharged state) PANI, leading to the desorption of zinc ions and the oxidation of PANI to complete self-charging. The battery can discharge for 12 min (0.5 C) after 50 self-charging/discharge cycles, while there is nearly no discharge capacity in the absence of Hb. This biology-inspired electronic regulation strategy may inspire new ideas to boost the performance of self-charging batteries.
RESUMEN
A reliable solid electrolyte interphase (SEI) on the metallic Zn anode is imperative for stable Zn-based aqueous batteries. However, the incompatible Zn-ion reduction processes, scilicet simultaneous adsorption (capture) and desolvation (repulsion) of Zn2+(H2O)6, raise kinetics and stability challenges for the design of SEI. Here, we demonstrate a tandem chemistry strategy to decouple and accelerate the concurrent adsorption and desolvation processes of the Zn2+ cluster at the inner Helmholtz layer. An electrochemically assembled perforative mesopore SiO2 interphase with tandem hydrophilic -OH and hydrophobic -F groups serves as a Janus mesopores accelerator to boost a fast and stable Zn2+ reduction reaction. Combining in situ electrochemical digital holography, molecular dynamics simulations, and spectroscopic characterizations reveals that -OH groups capture Zn2+ clusters from the bulk electrolyte and then -F groups repulse coordinated H2O molecules in the solvation shell to achieve the tandem ion reduction process. The resultant symmetric batteries exhibit reversible cycles over 8000 and 2000 h under high current densities of 4 and 10 mA cm-2, respectively. The feasibility of the tandem chemistry is further evidenced in both Zn//VO2 and Zn//I2 batteries, and it might be universal to other aqueous metal-ion batteries.
RESUMEN
Single-atom catalysts (SACs) with high atom utilization and outstanding catalytic selectivity are useful for improving battery performance. Herein, atomically dispersed Ni-N4 and Fe-N4 dual sites coanchored on porous hollow carbon nanocages (Ni-Fe-NC) are fabricated and deployed as the sulfur host for Li-S battery. The hollow and conductive carbon matrix promotes electron transfer and also accommodates volume fluctuation during cycling. Notably, the high d band center of Fe in Fe-N4 site demonstrates strong polysulfide affinity, leading to an accelerated sulfur reduction reaction. Meanwhile, Li2S on the Ni-N4 site delivers a metallic property with high S 2p electron density of states around the Femi energy level, enabling a low sulfur evolution reaction barrier. The dual catalytic effect on Ni-Fe-NC endows sulfur cathode high energy density, prolonged lifespan, and low polarization.
RESUMEN
The practical implementation of aqueous zinc-iodine batteries (ZIBs) is hindered by the rampant Zn dendrites growth, parasite corrosion, and polyiodide shuttling. In this work, ionic liquid EMIM[OAc] is employed as an all-round solution to mitigate challenges on both the Zn anode and the iodine cathode side. First, the EMIM+ embedded lean-water inner Helmholtz plane (IHP) and inert solvation sheath modulated by OAc- effectively repels H2 O molecules away from the Zn anode surface. The preferential adsorption of EMIM+ on Zn metal facilitates uniform Zn nucleation via a steric hindrance effect. Second, EMIM+ can reduce the polyiodide shuttling by hindering the iodine dissolution and forming an EMIM+ -I3 - dominated phase. These effects holistically enhance the cycle life, which is manifested by both Zn || Zn symmetric cells and Zn-I2 full cells. ZIBs with EAc deliver a capacity decay rate of merely 0.01 per cycle after over 18,000 cycles at 4â A g-1 , and lower self-discharge and better calendar life than the ZIBs without ionic liquid EAc additive.
RESUMEN
Hydrogels hold great promise as electrolytes for emerging aqueous batteries, for which establishing a robust electrode-hydrogel interface is crucial for mitigating side reactions. Conventional hydrogel electrolytes fabricated by ex situ polymerization through either thermal stimulation or photo exposure cannot ensure complete interfacial contact with electrodes. Herein, we introduce an in situ electropolymerization approach for constructing hydrogel electrolytes. The hydrogel is spontaneously generated during the initial cycling of the battery, eliminating the need of additional initiators for polymerization. The involvement of electrodes during the hydrogel synthesis yields well-bonded and deep infiltrated electrode-electrolyte interfaces. As a case study, we attest that, the in situ-formed polyanionic hydrogel in Zn-MnO2 battery substantially improves the stability and kinetics of both Zn anode and porous MnO2 cathode owing to the robust interfaces. This research provides insight to the function of hydrogel electrolyte interfaces and constitutes a critical advancement in designing highly durable aqueous batteries.
RESUMEN
A highly densified electrode material is desirable to achieve large volumetric capacity. However, pores acting as ion transport channels are critical for high utilization of active material. Achieving a balance between high volume density and pore utilization remains a challenge particularly for hollow materials. Herein, capillary force is employed to convert hollow fibers to a bamboo-weaving-like flexible electrode (BWFE), in which the shrinkage of hollow space results in high compactness of the electrode. The volume of the electrode can be decreased by 96% without sacrificing the gravimetric capacity. Importantly, the conductivity of BWFE after thermal treatment can reach up to 50,500 S/m which exceeds that for most other carbon materials. Detailed mechanical analysis reveals that, due to the strong interaction between nanoribbons, Young's modulus of the electrode increases by 105 times. After SnO2 active materials is impregnated, the BWFE/SnO2 electrode exhibits an exceptionally ultrahigh volumetric capacity of 2000 mAh/cm3.
RESUMEN
Unstable cathode-electrolyte and/or anode-electrolyte interface in polymer-based sodium-ion batteries (SIBs) will deteriorate their cycle performance. Herein, a unique solvated double-layer quasi-solid polymer electrolyte (SDL-QSPE) with high Na+ ion conductivity is designed to simultaneously improve stability on both cathode and anode sides. Different functional fillers are solvated with plasticizers to improve Na+ conductivity and thermal stability. The SDL-QSPE is laminated by cathode- and anode-facing polymer electrolyte to meet the independent interfacial requirements of the two electrodes. The interfacial evolution is elucidated by theoretical calculations and 3D X-ray microtomography analysis. The Na0.67 Mn2/3 Ni1/3 O2 |SDL-QSPE|Na batteries exhibit 80.4â mAh g-1 after 400â cycles at 1â C with the Coulombic efficiency close to 100 %, which significantly outperforms those batteries using the monolayer-structured QSPE.
RESUMEN
Poor stability of nanostructured electrocatalysts at rigorous industrial conditions significantly inhibits their performances in practical electrolyzers. Although many substrate-supported nanostructured electrocatalysts present attractive performance at small currents, they cannot sustain industry-level high current densities for long-term operation. Herein, by chemically organizing nanoscale electrocatalysts into a macroscopic substrate-free metallic alloy aerogel, this NiFe-based nano-catalyst achieves 1000-h durability at industrial-level current densities, with exceptionally high activities of 500 mA at the overpotential of only 281 mV. This NiFe alloy aerogel is constructed by a magnetic-field assisted growth and assembly of ferromagnetic NiFe nanoparticles, in which nanowires are loosely crosslinked by metallic joints. This alloy aerogel shows a high electric conductivity of 500 S m-1 , structural stability for more than 1.5 years in alkaline electrolyte, and almost complete recovery after compression exceeding 50% strain for 1000 cycles. The excellent mechanical stability of this metallic aerogel behaves as the key contributor to the superior electrocatalytic stability under industrially relevant conditions. This work offers a paradigm for electrode design for the practical application of nano-catalysts in industrial alkaline water electrolysis.
RESUMEN
Materials that can produce large controllable strains are widely used in shape memory devices, actuators and sensors1,2, and great efforts have been made to improve the strain output3-6. Among them, ferroelastic transitions underpin giant reversible strains in electrically driven ferroelectrics or piezoelectrics and thermally or magnetically driven shape memory alloys7,8. However, large-strain ferroelastic switching in conventional ferroelectrics is very challenging, while magnetic and thermal controls are not desirable for practical applications. Here we demonstrate a large shear strain of up to 21.5% in a hybrid ferroelectric, C6H5N(CH3)3CdCl3, which is two orders of magnitude greater than that in conventional ferroelectric polymers and oxides. It is achieved by inorganic bond switching and facilitated by structural confinement of the large organic moieties, which prevents undesired 180° polarization switching. Furthermore, Br substitution can soften the bonds, allowing a sizable shear piezoelectric coefficient (d35 ≈ 4,830 pm V-1) at the Br-rich end of the solid solution, C6H5N(CH3)3CdBr3xCl3(1-x). The electromechanical properties of these compounds suggest their potential in lightweight and high-energy-density devices, and the strategy described here could inspire the development of next-generation piezoelectrics and electroactive materials based on hybrid ferroelectrics.
RESUMEN
In recent years, the increasing demand for high-capacity and safe energy storage has focused attention on zinc batteries featuring high voltage, high capacity, or both. Despite extensive research progress, achieving high-energy-density zinc batteries remains challenging and requires the synergistic regulation of multiple factors including reaction mechanisms, electrodes, and electrolytes. In this Review, we comprehensively summarize the rational design strategies of high-energy-density zinc batteries and critically analyze the positive effects and potential issues of these strategies in optimizing the electrochemistry, cathode materials, electrolytes, and device architecture. Finally, the challenges and perspectives for the further development of high-energy-density zinc batteries are outlined to guide research towards new-generation batteries for household appliances, low-speed electric vehicles, and large-scale energy storage systems.
RESUMEN
Work function strongly impacts the surficial charge distribution, especially for metal-support electrocatalysts when a built-in electric field (BEF) is constructed. Therefore, studying the correlation between work function and BEF is crucial for understanding the intrinsic reaction mechanism. Herein, we present a Pt@CoOx electrocatalyst with a large work function difference (ΔΦ) and strong BEF, which shows outstanding hydrogen evolution activity in a neutral medium with a 4.5-fold mass activity higher than 20 % Pt/C. Both experimental and theoretical results confirm the interfacial charge redistribution induced by the strong BEF, thus subtly optimizing hydrogen and hydroxide adsorption energy. This work not only provides fresh insights into the neutral hydrogen evolution mechanism but also proposes new design principles toward efficient electrocatalysts for hydrogen production in a neutral medium.
RESUMEN
Various carbon nanomaterials are being widely studied for applications in supercapacitors and Li-ion batteries as well as hybrid energy storage devices. Dual-carbon batteries (DCBs), in which both electrodes are composed of functionalized carbon materials, are capable of delivering high energy/power and stable cycles when they are rationally designed. This Review focuses on the electrochemical reaction mechanisms and energy storage properties of various carbon electrode materials in DCBs, including graphite, graphene, hard and soft carbon, activated carbon, and their derivatives. The interfacial chemistry between carbon electrodes and electrolyte is also discussed. The perspective for further development of DCBs is presented at the end.
RESUMEN
Hollow micro-/nanostructures are widely explored for energy applications due to their unique structural advantages. The synthesis of hollow structures generally involves a "top-down" casting process based on hard or soft templates. Herein, a new and generic confinement strategy is developed to fabricate composite hollow fibers. A thin and homogeneous atomic-layer-deposition (ALD) Al2 O3 layer is employed to confine the pyrolysis of precursor fibers, which transform into metal (or metal oxide)-carbon composite hollow fibers after removal of Al2 O3 . Because of the uniform coating by ALD, the resultant composite hollow fibers exhibit a hollow interior from heads to ends even if they are millimeter long. V, Fe, Co, and Ni-based hollow nanofibers, demonstrating the versatility of this synthesis method, are successfully synthesized. Because of the carbon constituent, these composite fibers are particularly useful for energy applications. Herein, the as-obtained hollow V2 O3 -C fiber membrane is employed as a freestanding and flexible electrode for lithium-ion capacitor. The device shows an impressive energy density and a high power density.
RESUMEN
Organic-inorganic hybrid perovskites have been considered as promising gain materials for lasing. Despite previous reports of lasing from nanocrystals, thin films and single crystals, the stability of perovskite lasers has been a challenge for its practical applications. Herein, a scalable strategy to prepare ultrastable perovskite@polymer hybrid fibers by employing a facile emulsion electrospinning approach is demonstrated. During the electrospinning process, polymethyl methacrylate (PMMA) first solidifies into an outer shell layer. Meanwhile, emulsion drops containing poly(vinylidene fluoride) (PVDF) and perovskite precursor are pushed inward and evolve into perovskite nanocrystals covered by PVDF. The PMMA with smooth surface benefits the light transport and the water-resistant PVDF blocks the moisture. The methylammonium lead bromide perovskite-embedded fibers can emit intensive light after storage in humid ambient environment (relative humidity >60%) or even in water. Amplified spontaneous emissions from the fibers network and waveguide lasing from chopped single fiber is demonstrated.
RESUMEN
In photocatalysis, the Schottky barrier in metal-semiconductor hybrids is known to promote charge separation, but a core-shell structure always leads to a charge build-up and eventually shuts off the photocurrent. Here, we show that Au-Cu2 O hybrid nanostructures can be continuously tuned, particularly when the Cu2 O domains are single-crystalline. This is in contrast to the conventional systems, where the hybrid configuration is mainly determined by the choice of materials. The distal separation of the Au-Cu2 O domains in Janus nanostructures leads to enhanced charge separation and a large improvement of the photocurrent. The activity of the Au-Cu2 O Janus structures is 5â times higher than that of the core-shell structure, and 10â times higher than that of the neat Cu2 O nanocubes. The continuous structural tuning allows to study the structure-property relationship and an optimization of the photocatalytic performance.
RESUMEN
Prereduction of transition metal oxides is a feasible and efficient strategy to enhance their catalytic activity for hydrogen evolution. Unfortunately, the prereduction via the common H2 annealing method is unstable for nanomaterials during the hydrogen evolution process. Here, using NiMoO4 nanowire arrays as the example, it is demonstrated that carbon plasma (C-plasma) treatment can greatly enhance both the catalytic activity and the long-term stability of transition metal oxides for hydrogen evolution. The C-plasma treatment has two functions at the same time: it induces partial surface reduction of the NiMoO4 nanowire to form Ni4 Mo nanoclusters, and simultaneously deposits a thin graphitic carbon shell. As a result, the C-plasma treated NiMoO4 can maintain its array morphology, chemical composition, and catalytic activity during long-term intermittent hydrogen evolution process. This work may pave a new way for simultaneous activation and stabilization of transition metal oxide-based electrocatalysts.
RESUMEN
Organic-inorganic hybrid perovskites with considerable dielectric differences near the phase transition are potential candidates as phase transition materials (PTMs). However, compared with traditional PTMs, which require multiple switchable channels, the hybrid perovskites so far show only switching behavior in dielectric constants. We herein report a new crystal design strategy and successful synthesis of a two-dimensional perovskite (C6H5C2H4NH3)2MnCl4. In this hybrid perovskite, the manganese chloride octahedron is a crystal field sensitive luminescent molecular system. The distortion level of MnCl64- also depends on temperature during the order-disorder phase transition. Hence, such a manganese octahedron-based perovskite can exhibit switching behaviors in both dielectric and optical properties. We observe a 14% decrease in optical absorption and 1.6 times increase in dielectric constant during the phase transition at 365 K. In addition, the characteristic photoluminescence decreases by 17% in intensity. Such a molecule-based crystal design paves a new way to explore multifunctional PTMs based on organic-inorganic perovskites.
RESUMEN
Monolayer two-dimensional transitional metal dichalcogenides, such as MoS2, WS2, and WSe2, are direct band gap semiconductors with large exciton binding energy. They attract growing attentions for optoelectronic applications including solar cells, photodetectors, light-emitting diodes and phototransistors, capacitive energy storage, photodynamic cancer therapy, and sensing on flexible platforms. While light-induced luminescence has been widely studied, luminescence induced by injection of free electrons could promise another important applications of these new materials. However, cathodoluminescence is inefficient due to the low cross-section of the electron-hole creating process in the monolayers. Here for the first time we show that cathodoluminescence of monolayer chalcogenide semiconductors can be evidently observed in a van der Waals heterostructure when the monolayer semiconductor is sandwiched between layers of hexagonal boron nitride (hBN) with higher energy gap. The emission intensity shows a strong dependence on the thicknesses of surrounding layers and the enhancement factor is more than 500-fold. Strain-induced exciton peak shift in the suspended heterostructure is also investigated by the cathodoluminescence spectroscopy. Our results demonstrate that MoS2, WS2, and WSe2 could be promising cathodoluminescent materials for applications in single-photon emitters, high-energy particle detectors, transmission electron microscope displays, surface-conduction electron-emitter, and field emission display technologies.
RESUMEN
Customized electrode materials with good temperature adaptability and high-rate capability are critical to the development of wide-temperature power sources. Herein, high-quality TiC nanowires are uniformly grown on flexible carbon cloth as free-standing electric-double-layer supercapacitor electrode. The TiC nanowires, 20-40 nm wide and 3-6 µm long, are single-crystalline and highly conductive that is close to typical metal. Symmetric supercapacitors are constructed with ionic liquid electrolyte and TiC nanowires electrodes as wide-temperature and long-cycle stable power source. Ultrastable high-rate cycling life of TiC nanowire arrays electrodes is demonstrated with capacitance retention of 96.8% at 60 °C (≈440 F g-1 ), 99% at 25 °C (≈400 F g-1 ), and 98% at -25 °C (≈240 F g-1 ) after 50 000 cycles at 10 A g-1 . Moreover, due to high electrical conductivity, the TiC nanowire arrays show ultrafast energy release with a fast response time constant of ≈0.7 ms. The results demonstrate the viability of metal carbide nanostructures as wide-temperature, robust electrode materials for high-rate and ultrastable supercapacitors.
RESUMEN
Developing transition metal nitrides with unique nanomorphology is important for many energy storage and conversion processes. Here, a facile and novel one-step approach of growing 3D hierarchical nickel nitride (hNi3 N) on Ni foam via nitrogen plasma is reported. Different from most conventional chemical synthesis, the hNi3 N is obtained in much shorter growth duration (≤15 min) without any hazardous or reactive sources and oxide precursors at a moderate reaction zone temperature of ≤450 °C. Among possible multifunctionalities of the obtained nanocoral hNi3 N, herein the performance in reversible lithium ion storage and electrocatalytic oxygen evolution reaction (OER) is demonstrated. The as-obtained hNi3 N delivers a considerable cycling performance and rate stability as a lithium ion battery anode, and its property can be further enhanced by coating the hNi3 N surface with graphene quantum dots. The hNi3 N also serves as an active OER catalyst with high activity and stability. Additionally, on the basis of controlled growth under different nitrogen plasma treatment time, the formation mechanism of the nanocoralline hNi3 N is outlined for further extension to other materials. The results on time- and energy-efficient nitrogen-plasma-based preparation of hNi3 N pave the way for the development of high-performance metal nitride electrodes for energy storage and conversion.