Carbon nanotube electron blackbody and its radiation spectra.

An optical blackbody is an ideal absorber for all incident optical radiation, and the theoretical study of its radiation spectra paved the way for quantum mechanics (Planck's law). Herein, we propose the concept of an electron blackbody, which is a perfect electron absorber as well as an electron emitter with standard energy spectra at different temperatures. Vertically aligned carbon nanotube arrays are electron blackbodies with an electron absorption coefficient of 0.95 for incident energy ranging from 1 keV to 20 keV and standard electron emission spectra that fit well with the free electron gas model. Such a concept might also be generalized to blackbodies for extreme ultraviolet, X-ray, and γ-ray photons as well as neutrons, protons, and other elementary particles.

Gate-tunable contact-induced Fermi-level shift in semimetal.

Low-dimensional semimetal­semiconductor (Sm-S) van der Waals (vdW) heterostructures have shown their potentials in nanoelectronics and nano-optoelectronics recently. It is an important scientific issue to study the interfacial charge transfer as well as the corresponding Fermi-level shift in Sm-S systems. Here we investigated the gate-tunable contact-induced Fermi-level shift (CIFS) behavior in a semimetal single-walled carbon nanotube (SWCNT) that formed a heterojunction with a transition-metal dichalcogenide (TMD) flake. A resistivity comparison methodology and a Fermi-level catch-up model have been developed to measure and analyze the CIFS, whose value is determined by the resistivity difference between the naked SWCNT segment and the segment in contact with the TMD. Moreover, the relative Fermi-level positions of SWCNT and two-dimensional (2D) semiconductors can be efficiently reflected by the gate-tunable resistivity difference. The work function change of the semimetal, as a result of CIFS, will naturally introduce a modified form of the Schottky­Mott rule, so that a modified Schottky barrier height can be obtained for the Sm-S junction. The methodology and physical model should be useful for low-dimensional reconfigurable nanodevices based on Sm-S building blocks.

Engineering van der Waals Contacts by Interlayer Dipoles.

Tuning the interfacial Schottky barrier with van der Waals (vdW) contacts is an important solution for two-dimensional (2D) electronics. Here we report that the interlayer dipoles of 2D vdW superlattices (vdWSLs) can be used to engineer vdW contacts to 2D semiconductors. A bipolar WSe2 with Ba6Ta11S28 (BTS) vdW contact was employed to exhibit this strategy. Strong interlayer dipoles can be formed due to charge transfer between the Ba3TaS5 and TaS2 layers. Mechanical exfoliation breaks the superlattice and produces two distinguished surfaces with TaS2 and Ba3TaS5 terminations. The surfaces thus have opposite surface dipoles and consequently different work functions. Therefore, all the devices fall into two categories in accordance with the rectifying direction, which were verified by electrical measurements and scanning photocurrent microscopy. The growing vdWSL family along with the addition surface dipoles enables prospective vdW contact designs and have practical application in nanoelectronics and nano optoelectronics.

Highly Efficient Visible-Blind Ultraviolet Photodetector Based on Scalably Produced Titanium Dioxide Nanowire Arrays.

Here, we report a novel, feasible, and cost-effective method for the preparation of one-dimensional TiO2 nanowire arrays using a super-aligned carbon nanotube film as a template. Pure-anatase-phase TiO2 nanowires were scalably prepared in a suspended manner, and a high-performance ultraviolet (UV) photodetector was realized on a flexible substrate. The large surface area and one-dimensional nanostructure of the TiO2 nanowire array led to a high detectivity (1.35 × 1016 Jones) and an ultrahigh photo gain (2.6 × 104), respectively. A high photoresponsivity of 7.7 × 103 A/W was achieved under 7 µW/cm2 UV (λ = 365 nm) illumination at a 10 V bias voltage, which is much higher than those of commercial UV photodetectors. Additionally, by taking advantage of its anisotropic geometry, we found the TiO2 nanowire array showed polarized photodetection. The concept of using nanomaterial systems shows the potential for realization of nanostructured photodetectors for practical applications.

Graphene Microheater Chips for In Situ TEM.

Low-dimensional materials are bringing significant innovations to in situ TEM characterization. Here a new graphene microheater chip for TEM was developed by stacking graphene on a suspended SiNx membrane as the Joule heating element. It could be heated up to 800 °C within 26.31 ms with a low power consumption of 0.025 mW/1000 µm2. The bulging was only ∼50 nm at 650 °C, which is 2 orders of magnitude smaller than those of conventional MEMS heaters at similar temperatures. The performances benefit from the employment of graphene, since its monolayer structure greatly reduces the heat capacity, and the vdW contact significantly reduces the interfacial interaction. The TEM observation on the Sn melting process verifies its great potential in resolving thermodynamic processes. Moreover, more multifunctional in situ chips could be developed by integrating other stimuli to such chips. This work opens a new frontier for both graphene and in situ characterization techniques.

Perforated Carbon Nanotube Film Assisted Growth of Uniform Monolayer MoS2.

Scaling up the chemical vapor deposition (CVD) of monolayer transition metal dichalcogenides (TMDCs) is in high demand for practical applications. However, for CVD-grown TMDCs on a large scale, there are many existing factors that result in their poor uniformity. In particular, gas flow, which usually leads to inhomogeneous distributions of precursor concentrations, has yet to be well controlled. In this work, the growth of uniform monolayer MoS2 on a large scale by the delicate control of gas flows of precursors, which is realized by vertically aligning a well-designed perforated carbon nanotube (p-CNT) film face-to-face with the substrate in a horizontal tube furnace, is achieved. The p-CNT film releases gaseous Mo precursor from the solid part and allows S vapor to pass through the hollow part, resulting in uniform distributions of both gas flow rate and precursor concentrations near the substrate. Simulation results further verify that the well-designed p-CNT film guarantees a steady gas flow and a uniform spatial distribution of precursors. Consequently, the as-grown monolayer MoS2 shows quite good uniformity in geometry, density, structure, and electrical properties. This work provides a universal pathway for the synthesis of large-scale uniform monolayer TMDCs, and will advance their applications in high-performance electronic devices.

Direct Monitoring of Li2 S2 Evolution and Its Influence on the Reversible Capacities of Lithium-Sulfur Batteries.

The polysulfide (PS) dissolution and low conductivity of lithium sulfides (Li2 S) are generally considered the main reasons for limiting the reversible capacity of the lithium-sulfur (Li-S) system. However, as the inevitable intermediate between PSs and Li2 S, lithium disulfide (Li2 S2 ) evolutions are always overlooked. Herein, Li2 S2 evolutions are monitored from the operando measurements on the pouch cell level. Results indicate that Li2 S2 undergoes slow electrochemical reduction and chemical disproportionation simultaneously during the discharging process, leading to further PS dissolution and Li2 S generation without capacity contribution. Compared with the fully oxidized Li2 S, Li2 S2 still residues at the end of the charging state. Therefore, instead of the considered Li2 S and PSs, slow electrochemical conversions and side chemical reactions of Li2 S2 are the determining factors in limiting the sulfur utilization, corresponding to the poor reversible capacity of Li-S batteries.

Lithium Storage Mechanism and Application of Micron-Sized Lattice-Reversible Binary Intermetallic Compounds as High-Performance Flexible Lithium-Ion Battery Anodes.

A strategy of lattice-reversible binary intermetallic compounds of metallic elements is proposed for applications in flexible lithium-ion battery (LIB) anode with high capacity and cycling stability. First, the use of metallic elements can ensure excellent electronic conductivity and high capacity of the active anode substance. Second, binary intermetallic compounds possess a larger initial lattice volume than metallic monomers, so that the problem of volume expansion can be alleviated. Finally, the design of binary intermetallic compounds with lattice reversibility further improves the cycle stability. In this work, the feasibility of this strategy is verified using an indium antimonide (InSb) system. The volumetric expansion and lithium storage mechanism of InSb are investigated by in situ Raman characterization and theoretical calculations. The active material utilization is significantly improved and the growth of In whiskers is inhibited in the micron-sized ball-milled and carbon coated InSb (bInSb@C) anode, which exhibits a reversible capacity of 733.8 mAh g-1 at 0.2 C, and provides a capacity of 411.5 mAh g-1 after 200 cycles at 3 C with an average Coulombic efficiency of 99.95%. This strategy is validated in pouch cells, illustrating the great potential of lattice-reversible binary intermetallic compounds for use as commercial flexible LIB anodes.

Electrical control of spatial resolution in mixed-dimensional heterostructured photodetectors.

Low-dimensional nanomaterials, such as one-dimensional (1D) nanomaterials and layered 2D materials, have exhibited significance for their respective unique electronic and optoelectronic properties. Here we show that a mixed-dimensional heterostructure with building blocks from multiple dimensions will present a synergistic effect on photodetection. A carbon nanotube (CNT)-[Formula: see text]-graphene photodetector is representative on this issue. Its spatial resolution can be electrically switched between high-resolution mode (HRM) and low-resolution mode (LRM) revealed by scanning photocurrent microscopy (SPCM). The reconfigurable spatial resolution can be attributed to the asymmetric geometry and the gate-tunable Fermi levels of these low-dimensional materials. Significantly, an interference fringe with 334 nm in period was successfully discriminated by the device working at HRM, confirming the efficient electrical control. Electrical control of spatial resolution in CNT-[Formula: see text]-graphene devices reveals the potential of the mixed-dimensional architectures in future nanoelectronics and nano-optoelectronics.

Reconfigurable Tunneling Transistors Heterostructured by an Individual Carbon Nanotube and MoS2.

Low-dimensional semiconductors have shown great potential in switches for their atomically thin geometries and unique properties. It is significant to achieve new tunneling transistors by the efficient stacking methodology with low-dimensional building blocks. Here, we report a one-dimensional (1D)-two-dimensional (2D) mixed-dimensional van der Waals (vdW) heterostructure, which was efficiently fabricated by stacking an individual semiconducting carbon nanotube (CNT) and 2D MoS2. The CNT-MoS2 heterostructure shows specific reconfigurable electrical transport behaviors and can be set as a nn junction, pn diode, and band-to-band tunneling (BTBT) transistor by gate voltage. The transport properties, especially BTBT, could be attributed to the electron transfer from MoS2 to CNT through the ideal vdW interface and the 1D nature of the CNT. The progress suggests a new solution for tunneling transistors by making 1D-2D heterostructures from the rich library of low-dimensional nanomaterials. Furthermore, the reconfigurable functions and nanoscaled junction show that it is prospective to apply CNT-MoS2 heterostructures in future nanoelectronics and nano-optoelectronics.

Monolayer MoS2 Synaptic Transistors for High-Temperature Neuromorphic Applications.

As essential units in an artificial neural network (ANN), artificial synapses have to adapt to various environments. In particular, the development of synaptic transistors that can work above 125 °C is desirable. However, it is challenging due to the failure of materials or mechanisms at high temperatures. Here, we report a synaptic transistor working at hundreds of degrees Celsius. It employs monolayer MoS2 as the channel and Na+-diffused SiO2 as the ionic gate medium. A large on/off ratio of 106 can be achieved at 350 °C, 5 orders of magnitude higher than that of a normal MoS2 transistor in the same range of gate voltage. The short-term plasticity has a synaptic transistor function as an excellent low-pass dynamic filter. Long-term potentiation/depression and spike-timing-dependent plasticity are demonstrated at 150 °C. An ANN can be simulated, with the recognition accuracy reaching 90%. Our work provides promising strategies for high-temperature neuromorphic applications.

Toward an Intelligent Synthesis: Monitoring and Intervening in the Catalytic Growth of Carbon Nanotubes.

The bottom-up approach to directly synthesizing low-dimensional materials with outstanding performance has extended the material basis for the next generation integrated circuit industry. All the low-dimensional semiconductors, metals, dielectrics, and their heterojunctions are very promising bricks to build faster and more efficient chips because of their atomically smooth surface and interfaces. The greatest challenge in the synthesis of nanomaterials is how to precisely control the structure, crystalline orientation, defects, dimensions, etc. In past decades, both the methodology and the mechanism of synthesis have been systematically investigated to improve the controllability. However, few studies focused on sensing the synthesis processes in situ and responding to the synthesis immediately. Here, we propose the concept of intelligent synthesis in which the final product can be automatically fine-controlled by a closed loop including in situ monitoring and real-time interventions. As a model system, a high-temperature-tolerant circuit is fabricated on the single-walled carbon nanotube (SWCNT) growth substrate for sensing and responding to the synthesis processes. As a result, either highly pure semiconducting (s-) SWCNT arrays or metallic-semiconducting (m-s) junction arrays with different junction positions is simply synthesized by programming the responding signal. The intelligent synthesis shows much higher efficiency and controllability compared to conventional methods and will lead to the next leap in nanotechnology.

Macroscopic Carbon Nanotube Structures for Lithium Batteries.

Carbon nanotubes (CNTs) are regarded as one of the most promising materials to manufacture high-performance lithium batteries. This prospect is closely related to the construction of macroscopic architectures of CNTs. The superaligned CNT (SACNT) array is a unique kind of vertically aligned CNT array. Its highly oriented feature and strong intertube force facilitate the fabrication of macroscopic SACNT structures with various forms, including unidirectional films, buckypapers, and aerogels, etc. The as-produced SACNT macroscopic architectures are successfully introduced into lithium batteries due to their outstanding electrical and mechanical properties. Herein, an overview of the functions of macroscopic SACNTs in lithium batteries is proposed, including their applications in composite electrodes, current collectors, interlayers, and flexible full cells.

Antiferromagnetic topological insulator MnBi2Te4: synthesis and magnetic properties.

Recently, MnBi2Te4 has been discovered as the first intrinsic antiferromagnetic topological insulator (AFM TI), and it will become a promising material to discover exotic topological quantum phenomena. In this work, we have realized the successful synthesis of high-quality MnBi2Te4 single crystals by solid-state reactions. The as-grown MnBi2Te4 single crystal exhibits a van der Waals layered structure, which is composed of septuple Te-Bi-Te-Mn-Te-Bi-Te sequences as determined by X-ray diffraction and high-resolution high-angle annular dark field scanning transmission electron microscopy (HAADF-STEM). The magnetic order below 25 K as a consequence of A-type antiferromagnetic interaction between Mn layers in the MnBi2Te4 crystal suggests the unique interplay between antiferromagnetism and topological quantum states. Moreover, the transport measurements of MnBi2Te4 single crystals further confirm its magnetic transition. This study on the first AFM TI of MnBi2Te4 will guide the future research on other potential candidates in the MBixTey family (M = Ni, V, Ti, etc.).

Continuous, Ultra-lightweight, and Multipurpose Super-aligned Carbon Nanotube Tapes Viable over a Wide Range of Temperatures.

In extreme environments, such as at ultrahigh or ultralow temperatures, the amount of tape used should be minimal so as to reduce system contamination and unwanted residues. However, tapes made from conventional materials typically lose their adhesiveness or leave residues difficult to remove under such conditions. Thus, the development of more versatile, lightweight, and easily removable tapes for applications in such extreme environments has received considerable attention. Here, we report that horizontally superaligned carbon nanotube (SACNT) tapes can be used to provide perfect van der Waals (vdW) interface contacts over a wide range of temperatures (from -196 to 1000 °C), yielding outstanding adhesiveness with specific adhesion strengths up to ∼1.1 N/µg. With a surface density of only 0.5-5 µg/cm2, hundreds of times lighter than the vertically aligned CNT adhesives, the SACNT tapes can be cost-effectively provided in hundreds of meters. They have multipurpose adhesive abilities for versatile materials and are also easily separated from samples even after exposure to extreme temperature regimes. First-principles calculations confirm the mechanism of vdW adhesion and reveal that ultraflat and nanometer-thick SACNT tapes may yield far greater adhesive abilities. These SACNT tapes show great potential for use in mechanical bonding, electrical bonding, and thermal dissipation in electronic devices.

Spirally deformable soft actuators and their designable helical actuations based on a highly oriented carbon nanotube film.

Spiral configurations and helical curlings of plant tendrils and seed pods are very common in nature. Many researchers have tried to develop spirally deformable actuators to mimic these natural spirals through several approaches, such as preforming helical shapes, processing diagonal stripes and employing anisotropic organic layers. However, these methods are usually complex and time-consuming. Here, we used an efficient method to produce a highly oriented carbon nanotube (CNT) film and develop a series of spirally deformable soft actuators which perform various controllable helical actuations. The actuator consists of a CNT layer with strong anisotropy and a silicone layer. By simply adjusting the orientations of the aligned CNTs, the prepared actuators can accomplish left- or right-handed spiral deformations with different helical forms when driven by electricity. Finite element analyses and simulations were conducted to investigate the mechanism. It is confirmed that it is the anisotropic moduli of the CNT film that regulate the internal stress distributions of the actuators and lead to helical actuations. Moreover, complex actuator designs and functional applications were also carried out. A V-shaped actuator can simultaneously achieve left- and right-handed curling with large angles (630°), which vividly imitates the spiral winding of a tendril. A Y-shaped actuator performed three-dimensional movements, which can manipulate lightweight objects deftly. By virtue of easy preparation and flexible function design, the spirally deformable actuators based on the oriented CNT film will be very promising in artificial muscles and bionic soft robots.

Effect of an Auxiliary Plate on Passive Heat Dissipation of Carbon Nanotube-Based Materials.

Carbon nanotubes (CNTs) and other related CNT-based materials with a high thermal conductivity can be used as promising heat dissipation materials. Meanwhile, the miniaturization and high functionality of portable electronics, such as laptops and mobile phones, are achieved at the cost of overheating the high power-density components. The heat removal for hot spots occurring in a relatively narrow space requires simple and effective cooling methods. Here, an auxiliary passive cooling approach by the aid of a flat plate (aluminum-magnesium alloy) is investigated to accommodate heat dissipation in a narrow space. The cooling efficiency can be raised to 43.5%. The cooling performance of several CNT-based samples is compared under such circumstances. Heat dissipation analyses show that, when there is a nearby plate for cooling assistance, the heat radiation is weakened and natural convection is largely improved. Thus, improving heat radiation by increasing emissivity without reducing natural convection can effectively enhance the cooling performance. Moreover, the decoration of an auxiliary cooling plate with sprayed CNTs can further improve the cooling performance of the entire setup.

Carbon Nanotube Film Gate in Vacuum Electronic Devices.

A superaligned carbon nanotube (SACNT) film can act as an ideal gate electrode in vacuum electronics due to its low secondary electron emission, high electron transparency, ultrasmall thickness, highly uniform electric field, high melting point, and high mechanical strength. We used a SACNT film as the gate electrode in a thermionic emission electron tube and field emission display prototype. The SACNT film gate in a thermionic emission electron tube shows a larger amplification factor. A triode tube with the SACNT film gate is used in an audio amplification circuit. The SACNT film gate electrode in field emission devices shows better field uniformity. The field emission display prototype is demonstrated to dynamically display Chinese characters.

Multifunctional Interlayer Based on Molybdenum Diphosphide Catalyst and Carbon Nanotube Film for Lithium-Sulfur Batteries.

A multifunctional interlayer, composed of molybdenum diphosphide (MoP2 ) nanoparticles and a carbon nanotube (CNT) film, is introduced into a lithium-sulfur (Li-S) battery system to suppress polysulfide migration. Molybdenum diphosphide acts as the catalyst and can capture polysulfides and improve the polysulfide conversion activity during the discharge/charge processes. The CNT film acts as a conductive skeleton to support the MoP2 nanoparticles and to ensure their uniform distribution. The CNT film physically hinders polysulfide migration, acts as a current collector, and provides abundant electron pathways. The Li-S battery containing the multifunctional MoP2 /CNT interlayer exhibits excellent electrochemical performance. It delivers a reversible specific capacity of 905 mA h g-1 over 100 cycles at 0.2 C, with a capacity decay of 0.152% per cycle. These results suggest the introduction of the multifunctional CNT/MoP2 interlayer as an effective and practical method for producing high-performance Li-S batteries.

Programmable and functional electrothermal bimorph actuators based on large-area anisotropic carbon nanotube paper.

Electro-active polymer (EAP) actuators, such as electronic, ionic and electrothermal (ET) actuators, have become an important branch of next-generation soft actuators in bionic robotics. However, most reported EAP actuators could realize only simple movements, being restricted by the small area of flexible electrodes and simple designs. We prepared large-area flexible electrodes of high anisotropy, made of oriented carbon nanotube (CNT) paper, and carried out artful graphic designs and processing on the electrodes to make functional ET bimorph actuators which can realize large bending deformations (over 220°, curvature > 1.5 cm-1) and bionic movements driven by electricity. The anisotropy of CNT paper benefits electrode designs and multiform actuations for complex actuators. Based on the large-area CNT paper, more interesting and functional actuators can be designed and prepared which will have practical applications in the fields of artificial muscles, complicated actuations, and soft and bionic robotics.