Single-sided NMR to estimate morphological parameters of the trabecular bone structure.

PURPOSE: Single-sided 1 H-NMR is proposed for the estimation of morphological parameters of trabecular bone, and potentially the detection of pathophysiological alterations of bone structure. In this study, a new methodology was used to estimate such parameters without using an external reference signal, and to study intratrabecular and intertrabecular porosities, with a view to eventually scanning patients. METHODS: Animal trabecular bone samples were analyzed by a single-sided device. The Carr-Purcell-Meiboom-Gill sequence of 1 H nuclei of fluids, including marrow, confined inside the bone, was analyzed by quasi-continuous T2 distributions and separated into two 1 H pools: short and long T2 components. The NMR parameters were estimated using models of trabecular bone structure, and compared with the corresponding micro-CT. RESULTS: Without any further assumptions, the internal reference parameter (short T2 signal intensity fraction) enabled prediction of the micro-CT parameters BV/TV (volume of the trabeculae/total sample volume) and BS/TV (external surface of the trabeculae/total sample volume) with linear correlation coefficient >0.80. The assignment of the two pools to intratrabecular and intertrabecular components yielded an estimate of average intratrabecular porosity (33 ± 5)%. Using the proposed models, the NMR-estimated BV/TV and BS/TV were found to be linearly related to the corresponding micro-CT values with high correlation (>0.90 for BV/TV; >0.80 for BS/TV) and agreement coefficients. CONCLUSION: Low-field, low-cost portable devices that rely on intrinsic magnetic field gradients and do not use ionizing radiation are viable tools for in vitro preclinical studies of pathophysiological structural alterations of trabecular bone.

Characterization of Structural Bone Properties through Portable Single-Sided NMR Devices: State of the Art and Future Perspectives.

Nuclear Magnetic Resonance (NMR) is a well-suited methodology to study bone composition and structural properties. This is because the NMR parameters, such as the T2 relaxation time, are sensitive to the chemical and physical environment of the 1H nuclei. Although magnetic resonance imaging (MRI) allows bone structure assessment in vivo, its cost limits the suitability of conventional MRI for routine bone screening. With difficulty accessing clinically suitable exams, the diagnosis of bone diseases, such as osteoporosis, and the associated fracture risk estimation is based on the assessment of bone mineral density (BMD), obtained by the dual-energy X-ray absorptiometry (DXA). However, integrating the information about the structure of the bone with the bone mineral density has been shown to improve fracture risk estimation related to osteoporosis. Portable NMR, based on low-field single-sided NMR devices, is a promising and appealing approach to assess NMR properties of biological tissues with the aim of medical applications. Since these scanners detect the signal from a sensitive volume external to the magnet, they can be used to perform NMR measurement without the need to fit a sample inside a bore of a magnet, allowing, in principle, in vivo application. Techniques based on NMR single-sided devices have the potential to provide a high impact on the clinical routine because of low purchasing and running costs and low maintenance of such scanners. In this review, the development of new methodologies to investigate structural properties of trabecular bone exploiting single-sided NMR devices is reviewed, and current limitations and future perspectives are discussed.

Bone volume-to-total volume ratio measured in trabecular bone by single-sided NMR devices.

PURPOSE: Reduced bone strength is associated with a loss of bone mass, usually evaluated by dual-energy X-ray absorptiometry, although it is known that the bone microstructure also affects the bone strength. Here, a method is proposed to measure (in laboratory) the bone volume-to-total volume ratio by single-sided NMR scanners, which is related to the microstructure of the trabecular bone. METHODS: Three single-sided scanners were used on animal bone samples. These low-field, mobile, low-cost devices are able to detect the NMR signal, regardless of the sample sizes, without the use of ionizing radiations, with the further advantage of signal localization offered by their intrinsic magnetic field gradients. RESULTS: The performance of the different single-sided scanners have been discussed. The results have been compared with bone volume-to-total volume ratio by micro CT and MRI, obtaining consistent values. CONCLUSIONS: Our results demonstrate the feasibility of the method for laboratory analyses, which are useful for measurements like porosity on bone specimens. This can be considered as the first step to develop an NMR method based on the use of a mobile single-sided device, for the diagnosis of osteoporosis, through the acquisition of the signal from the appendicular skeleton, allowing for low-cost, wide screening campaigns. Magn Reson Med 79:501-510, 2018. © 2017 International Society for Magnetic Resonance in Medicine.

The effect of diffusion gradient direction number on corticospinal tractography in the human brain: an along-tract analysis.

OBJECTIVES: We evaluated diffusion imaging measures of the corticospinal tract obtained with a probabilistic tractography algorithm applied to data of two acquisition protocols based on different numbers of diffusion gradient directions (NDGDs). MATERIALS AND METHODS: The corticospinal tracts (CST) of 18 healthy subjects were delineated using 22 and 66-NDGD data. An along-tract analysis of diffusion metrics was performed to detect possible local differences due to NDGD. RESULTS: FA values at 22-NDGD showed an increase along the central portion of the CST. The mean of partial volume fraction of the orientation of the second fiber (f2) was higher at 66-NDGD bilaterally, because for 66-NDGD data the algorithm more readily detects dominant fiber directions beyond the first, thus the increase in FA at 22-NDGD is due to a substantially reduced detection of crossing fiber volume. However, the good spatial correlation between the tracts drawn at 22 and 66 NDGD shows that the extent of the tract can be successfully defined even at lower NDGD. CONCLUSIONS: Given the spatial tract localization obtained even at 22-NDGD, local analysis of CST can be performed using a NDGD compatible with clinical protocols. The probabilistic approach was particularly powerful in evaluating crossing fibers when present.

Stone porosity, wettability changes and other features detected by MRI and NMR relaxometry: a more than 15-year study.

Scientists applying magnetic resonance techniques to cultural heritage are now a quite vast and international community, even if these applications are not yet well known outside this community. Not only laboratory experiments but also measurements in the field are now possible, with the use of portable nuclear magnetic resonance (NMR) instruments that enable non-invasive and non-destructive studies on items of any size, of high artistic and historical value as well as diagnosis of their conservation state. The situation was completely different in the second half of the 1990s when our group started working on applications of NMR to cultural heritage, by combining the knowledge of NMR for fluids in porous media at the University of Bologna, with the skilfulness of the chemists for cultural heritage of CNR and University of Florence, and Safeguarding Cultural Heritage Department of Aosta. Since then, our interest has been mainly devoted to develop methods to study the structure of pore space and their changes as a result of the decay, as well as to evaluate performance of the protective and conservative treatments of porous materials like stone, ceramic, cements and wood. In this paper, we will review the pathway that led us from the first tentative experiments, in the second half of the 1990s to the current work on these topics.

Nano and sub-nano multiscale porosity formation and other features revealed by 1H NMR relaxometry during cement hydration.

Cement hydration occurs when water is added to cement powder, leading to the formation of crystalline products like Portlandite and the quasi-amorphous, poorly crystalline, calcium silicate hydrate (C-S-H) gel. Despite its importance in determining the final properties of the cement, many models exist for the nano and sub-nano level organization of this "liquid stone." (1)H NMR relaxometry in White Portland Cement paste during hydration allowed us to monitor the formation and evolution of the multiscale porosity of the cement, with the formation of structures at nano and sub-nano levels of C-S-H gel (calcium silicate interlayer water, water in small and large gel pores) along with three low-mobility (1)H pools, identified as (1)H nuclei in C-S-H layers, likely belonging to OH groups, with (1)H nuclei in Portlandite, and in crystal water of Ettringite. By assuming these assignments, our data allowed us to compute the distances of pairs of (1)H nuclei in Portlandite and in crystal water ((1.9 ± 0.2) Å and (1.6 ± 0.1) Å, respectively), consistent with the known values of these distances. The picture of the porous structure at nano and sub-nano levels emerging from our results is consistent with the Jennings colloidal model for C-S-H gel. Moreover, the constant values observed during hydration of parameters extracted from our data analysis strongly support that model, being compatible with the picture of C-S-H gel developing in comparable-sized clumps of the same composition, but not easily interpretable by models proposing quasi continuous sheets of C-S-H layers.

A time-domain nuclear magnetic resonance study of Mediterranean scleractinian corals reveals skeletal-porosity sensitivity to environmental changes.

Mediterranean corals are a natural model for studying global warming, as the Mediterranean basin is expected to be one of the most affected regions and the increase in temperature is one of the greatest threats for coral survival. We have analyzed for the first time with time-domain nuclear magnetic resonance (TD-NMR) the porosity and pore-space structure, important aspects of coral skeletons, of two scleractinian corals, Balanophyllia europaea (zooxanthellate) and Leptopsammia pruvoti (nonzooxanthellate), taken from three different sites on the western Italian coast along a temperature gradient. Comparisons have been made with mercury intrusion porosimetry and scanning electron microscopy images. TD-NMR parameters are sensitive to changes in the pore structure of the two coral species. A parameter, related to the porosity, is larger for L. pruvoti than for B. europaea, confirming previous non-NMR results. Another parameter representing the fraction of the pore volume with pore sizes of less than 10-20 µm is inversely related, with a high degree of statistical significance, to the mass of the specimen and, for B. europaea, to the temperature of the growing site. This effect in the zooxanthellate species, which could reduce its resistance to mechanical stresses, may depend on an inhibition of the photosynthetic process at elevated temperatures and could have particular consequences in determining the effects of global warming on these species.

Coral micro- and macro-morphological skeletal properties in response to life-long acclimatization at CO2 vents in Papua New Guinea.

This study investigates the effects of long-term exposure to OA on skeletal parameters of four tropical zooxanthellate corals naturally living at CO2 seeps and adjacent control sites from two locations (Dobu and Upa Upasina) in the Papua New Guinea underwater volcanic vent system. The seeps are characterized by seawater pH values ranging from 8.0 to about 7.7. The skeletal porosity of Galaxea fascicularis, Acropora millepora, massive Porites, and Pocillopora damicornis was higher (up to ~ 40%, depending on the species) at the seep sites compared to the control sites. Pocillopora damicornis also showed a decrease of micro-density (up to ~ 7%). Thus, further investigations conducted on this species showed an increase of the volume fraction of the larger pores (up to ~ 7%), a decrease of the intraskeletal organic matrix content (up to ~ 15%), and an increase of the intraskeletal water content (up to ~ 59%) at the seep sites. The organic matrix related strain and crystallite size did not vary between seep and control sites. This multi-species study showed a common phenotypic response among different zooxanthellate corals subjected to the same environmental pressures, leading to the development of a more porous skeletal phenotype under OA.

Water vapor absorption in porous media polluted by calcium nitrate studied by time domain nuclear magnetic resonance.

Nuclear magnetic resonance relaxation analysis of liquid water (1)H nuclei in real porous media, selected for their similar composition (carbonate rocks) and different pore space architecture, polluted with calcium nitrate, is presented to study the kinetics of water condensation and salt deliquescence inside the pore space. These phenomena are responsible for deterioration of porous materials when exposed to environmental injury by pollution in a humid atmosphere. The theory is well described for simple pore geometries, but it is not yet well understood in real porous media with wide distributions of pore sizes and connections. The experiment is performed by following in time the formation of liquid water inside the pore space by T(1) and T(2) relaxation time distributions. The distributions allow one to see the effects of both the salt concentration and the pore space structure on the amount of water vapor condensed and its kinetics. It is shown that, for a given lithotype, even with different amounts of pollutant, the rate-average relaxation time T(1ra) tends to increase monotonically with NMR signal, proportional to the amount of liquid water. T(1ra) is often inversely associated with surface-to-volume ratio. This suggests a trend toward the filling of larger pores as amounts of liquid water increase, but it does not indicate a strict sequential filling of pores in order of size and starting with the smallest; in fact, relaxation time distributions show clearly that this is not the case. Increased amounts of salt lead to both markedly increased rates and markedly increased amounts of water absorption. NMR measurements of amounts of water, together with relaxation time distributions, give the possibility of information on the effect of pollution in porous materials exposed to humid atmospheres but sheltered from liquid water, even before the absorption of large amounts of moisture and subsequent damage. These phenomena are of importance also in other fields, such as the exploitation of geothermal energy.

Along-tract analysis of the arcuate fasciculus using the Laplacian operator to evaluate different tractography methods.

PURPOSE: We propose a new along-tract algorithm to compare different tractography algorithms in tract curvature mapping and along-tract analysis of the arcuate fasciculus (AF). In particular, we quantified along-tract diffusion parameters and AF spatial distribution evaluating hemispheric asymmetries in a group of healthy subjects. METHODS: The AF was bilaterally reconstructed in a group of 29 healthy subjects using the probabilistic ball-and-sticks model, and both deterministic and probabilistic constrained spherical deconvolution. We chose cortical ROIs as tractography targets and the developed along-tract algorithm used the Laplacian operator to parameterize the volume of the tract, allowing along-tract analysis and tract curvature mapping independent of the tractography algorithm used. RESULTS: The Laplacian parameterization successfully described the tract geometry underlying hemispheric asymmetries in the AF curvature. Using the probabilistic tractography methods, we found more tracts branching towards cortical terminations in the left hemisphere. This influenced the left AF curvature and its diffusion parameters, which were significantly different with respect to the right. In particular, we detected projections towards the middle temporal and inferior frontal gyri bilaterally, and towards the superior temporal and precentral gyri in the left hemisphere, with a significantly increased volume and connectivity. CONCLUSIONS: The approach we propose is useful to evaluate brain asymmetries, assessing the volume, the diffusion properties and the quantitative spatial localization of the AF.

Chondrocyte-alginate bioconstructs: a nuclear magnetic resonance relaxation study.

Proton nuclear magnetic resonance (NMR) relaxometry can give informations about hydrogel scaffold properties. As these properties can be modified with culture time and conditions according to scaffold biodegradability and new tissue biosynthesis, the aim of this research was to test the efficiency of this noninvasive NMR technique in the follow-up of 3D cultures for tissue engineering. The distributions of proton relaxation times T1 and T2 have been measured on cylindrical gel samples of different types of alginate, in the presence or absence of hyaluronate, in gels or bioconstructs with encapsulated chondrocytes cultured for 30 days in normal or reduced weight conditions. It was found that T2 increases with the mannuronate/guluronate ratio in alginate samples and with the presence of hyaluronate. The distributions of both T1 and T2 result wider for bioconstructs cultured in normal gravity than for those cultured in reduced weight conditions. Neither cell growing nor collagen production but only GAG neosynthesis have been demonstrated in our experimental conditions. In conclusion, T2 is sensitive to the gel properties (possibly to the rigidity of macromolecular components). The homogeneity of bioconstructs can be monitored by the distribution of T1 and T2. We propose that nonspatially resolved NMR relaxometry can efficiently be used in monitoring tissue development in a biodegradable scaffold for tissue engineering.

PERFIDI: parametrically enabled relaxation filters with double and multiple inversion.

We present a novel approach to the nuclear magnetic resonance (NMR) and magnetic resonance imaging (MRI) analysis of complex samples with nontrivial distribution of longitudinal relaxation rate R(1). Parametrically enabled relaxation filters with double and multiple inversion (PERFIDI) aim to separate signals arising from components with different R(1) values prior to actual data acquisition. Given any standard NMR/MRI pulse sequence, which, by itself, is insensitive to differences in R(1) values, it can be combined with a PERFIDI preamble, which functions as a preliminary R(1) filter and confers on the original technique sensitivity to the dimension R(1). This article states the principles of the approach, including the way to account for instrumental imperfections, and shows how PERFIDI with specific filter profile functions can be built. Using terms borrowed from electronics, these filters are classified as low-pass, high-pass and band-pass types. Also included are an experimental verification example and a discussion of potential applications of PERFIDI in various NMR areas.

Imaging inert fluorinated gases in cracks: perhaps in David's ankles.

Inspired by the challenge of determining the nature of cracks on the ankles of Michelangelo's statue David, we discovered that one can image SF(6) gas in cracks in marble samples with alacrity. The imaging method produces images of gas with a signal-to-noise ratio (SNR) of 100-250, which is very high for magnetic resonance imaging (MRI) in general, let alone for an image of a gas at thermal equilibrium polarization. To put this unusual SNR in better perspective, we imaged SF(6) in a crack in a marble sample and imaged the lung tissue of a live rat (a more familiar variety of sample to many MRI scientists) using the same pulse sequence, the same size coils and the same MRI system. In both cases, we try to image subvoxel thin sheets of material that should appear bright against a darker background. By choosing imaging parameters appropriate for the different relaxation properties of SF(6) gas versus lung tissue and by choosing voxel sizes appropriate for the different goals of detecting subvoxel cracks on marble versus resolving subvoxel thin sheets of tissue, the SNR for voxels full of material was 220 and 14 for marble and lung, respectively. A major factor is that we chose large voxels to optimize SNR for detecting small cracks and we chose small voxels for resolving lung features at the expense of SNR. Imaging physics will cooperate to provide detection of small cracks on marble, but David's size poses a challenge for magnet designers. For the modest goal of imaging cracks in the left ankle, we desire a magnet with an approximately 32-cm gap and a flux density of approximately 0.36 T that weighs <500 kg.

Nuclear magnetic resonance for cultural heritage.

Nuclear magnetic resonance (NMR) portable devices are now being used for nondestructive in situ analysis of water content, pore space structure and protective treatment performance in porous media in the field of cultural heritage. It is a standard procedure to invert T(1) and T(2) relaxation data of fully water-saturated samples to get "pore size" distributions, but the use of T(2) requires great caution. It is well known that dephasing effects due to water molecule diffusion in a magnetic field gradient can affect transverse relaxation data, even if the smallest experimentally available half echo time tau is used in Carr-Purcell-Meiboom-Gill experiments. When a portable single-sided NMR apparatus is used, large field gradients due to the instrument, at the scale of the sample, are thought to be the dominant dephasing cause. In this paper, T(1) and T(2) (at different tau values) distributions were measured in natural (Lecce stone) and artificial (brick samples coming from the Greek-Roman Theatre of Taormina) porous media of interest for cultural heritage by a standard laboratory instrument and a portable device. While T(1) distributions do not show any appreciable effect from inhomogeneous fields, T(2) distributions can show strong effects, and a procedure is presented based on the dependence of 1/T(2) on tau to separate pore-scale gradient effects from sample-scale gradient effects. Unexpectedly, the gradient at the pore scale can be, in some cases, strong enough to make negligible the effects of gradients at the sample scale of the single-sided device.

An Environmental Friendly Fluorinated Oligoamide for Producing Nonwetting Coatings with High Performance on Porous Surfaces.

The changes in the surface wettability of many materials are receiving increased attention in recent years. It is not too hard to fabricate resistant hydrophobic surfaces through products bearing both hydrophobic and reactive hydrophilic end groups. More challenging is obtaining resistant nonwetting surfaces through noncovalent reversible bonds. In this work, a fluorinated oligo(ethylenesuccinamide), soluble in solvent benign for operators and environment, has been synthesized. It contains two opposite functional groups (perfluoropolyether segments and amidic groups) (SC2-PFPE) that provide water repellency while hydrophilicity is retained. Its performance has been tested on porous calcarenite and investigated by magnetic resonance imaging, water capillary absorption, and vapor diffusivity tests. The results demonstrate that SC2-PFPE modifies the wettability of porous substrates in a drastic and durable way and reduces the vapor condensation inside the pore space due to the perfluoropolyether segments that act at the air/surface interface.

NMR relaxometry and imaging of water absorbed in biodegradable polymer scaffolds.

Porous substrates made of poly(3-hydroxybutyrate-3-hydroxyvalerate) (PHBHV) were prepared by a particulate leaching method. After removing the salt by extraction in water, proton nuclear magnetic resonance (NMR) relaxometry and imaging were performed on sets of PHBHV substrates immersed in phosphate-buffered solution during 3 months at different time points. Polarized optical microscopy studies were performed on thin sections, 25 and 5 mum, of the PHBHV samples. The results of NMR relaxometry showed two (1)H nuclei populations, well distinguishable on the free induction decay (FID), due to the different decay time constants, a factor of 10(2) apart. Thus, it was possible to separate the two populations, giving separate distributions of T(1) relaxation times. One population could be associated with water protons in the pores and the other to macromolecular protons. The distributions of T(1) and T(2) of the water proton shifted to lower values with increasing immersion time to a constant value after 30 days. The results obtained by NMR imaging showed an initial increase in the apparent porosity, reaching a plateau after 25 days of immersion. This increase is attributed mainly to the absorption of water in the microporosity as supported by the results of the relaxometry measurements and shown by scanning electron microscopy. The average porosity measured by NMR imaging at the plateau, 78+/-3%, is slightly higher than that determined by optical microscopy, 73+/-9%, which may be due to the fact that the latter method did not resolve the microporosity. Overall, the results suggest that at early stages after immersing the scaffolds in the aqueous medium, first 30 days approximately, NMR imaging could underestimate the porosity of the substrate.

Shell properties of commercial clam Chamelea gallina are influenced by temperature and solar radiation along a wide latitudinal gradient.

Phenotype can express different morphologies in response to biotic or abiotic environmental influences. Mollusks are particularly sensitive to different environmental parameters, showing macroscale shell morphology variations in response to environmental parameters. Few studies concern shell variations at the different scale levels along environmental gradients. Here, we investigate shell features at the macro, micro and nanoscale, in populations of the commercially important clam Chamelea gallina along a latitudinal gradient (~400 km) of temperature and solar radiation in the Adriatic Sea (Italian cost). Six populations of clams with shells of the same length were analyzed. Shells from the warmest and the most irradiated population were thinner, with more oval shape, more porous and lighter, showing lower load fracture. However, no variation was observed in shell CaCO3 polymorphism (100% aragonite) or in compositional and textural shell parameters, indicating no effect of the environmental parameters on the basic processes of biomineralization. Because of the importance of this species as commercial resource in the Adriatic Sea, the experimentally quantified and significant variations of mass and fracture load in C. gallina shells along the latitudinal gradient may have economic implications for fisheries producing different economical yield for fishermen and consumers along the Adriatic coastline.

Initially linear echo-spacing dependence of 1/T2 measurements in many porous media with pore-scale inhomogeneous fields.

For a liquid sample with unrestricted diffusion in a constant magnetic field gradient g, the increase R in R2=1/T2 for CPMG measurements is 1/3(taugammag)2D, where gamma is magnetogyric ratio, tau is the half the echo spacing TE, and D is the diffusion constant. For measurements on samples of porous media with pore fluids and without externally applied gradients there may still be significant pore-scale local inhomogeneous fields due to susceptibility differences, whose contributions to R2 depend on tau. Here, diffusion is not unrestricted nor is the field gradient constant. One class of approaches to this problem is to use an "effective gradient" or some kind of average gradient. Then, R2 is often plotted against tau2, with the effective gradient determined from the slope of some of the early points. In many cases, a replot of R2 against tau instead of tau2 shows a substantial straight-line interval, often including the earliest available points. In earlier work [G.C. Borgia, R.J.S. Brown, P. Fantazzini, Phys. Rev. E 51 (1995) 2104; R.J.S. Brown, P. Fantazzini, Phys. Rev. B 47 (1993) 14823] these features were noted, and attention was called to the fact that very large changes in field and gradient are likely for a small part of the pore fluid over distances very much smaller than pore dimensions. A truncated Cauchy-Lorentz (C-L) distribution of local fields in the pore space was used to explain observations, giving reduced effects of diffusion because of the averaging properties of the C-L distribution, the truncation being at approximately +/-1/2chiB0, where chi is the susceptibility difference. It was also noted that, when there is a narrow range of pore size a, over a range of about 40 of the parameter xi=1/3chinua2/D, where nu is the frequency, R2 does not depend much on pore size a nor on diffusion constant D. Examples are shown where plots of R2 vs tau show better linear fits to the data for small tau values than do plots vs tau2. The present work shows that, if both grain-scale and sample-scale gradients are present for samples with narrow ranges of T2, it may be possible to identify the separate effects with the linear and quadratic coefficients in a second-order polynomial fit to the early data points. Of course, many porous media have wide pore size and T2 distributions and hence wide ranges of xi. For some of these wide distributions we have plotted R2 vs tau for signal percentiles, normalized to total signal for shortest tau, again showing initially linear tau-dependence even when available data do not cover the longest and/or shortest T2 values for alltau values. For the examples presented, both the intercepts and the initial slopes of the plots of R2 vs tau increase systematically with signal percentile, starting at smallest R2.

Magnetic resonance for fluids in porous media at the University of Bologna.

The magnetic resonance in porous media (MRPM) community is now a vast community of scientists from all over the world who recognize magnetic resonance as an instrument of choice for the characterization of pore space and of the distribution, diffusion and flow of fluids inside a vast range of different materials. The MRPM conferences are the occasions in which this community gets together, compares notes and grows. The scene was different in 1990, when this series of conferences was promoted at Bologna. I will go briefly over the history of these events, showing the role played by the University of Bologna and in particular by the intuition, ingenuity and passion of Giulio Cesare Borgia. The MRPM work at Bologna began in the mid-1980s. New correlations were found among parameters from NMR relaxation measurements and oil field parameters such as porosity, permeability to fluid flow, irreducible water saturation, residual oil saturation and pore-system surface-to-volume ratio, and fast algorithms were developed to give the different NMR parameters. Interest in valid interpretation of data led to extensive work also on the inversion of multiexponential relaxation data and the effects of inhomogeneous fields from susceptibility differences on distributions of relaxation times. In the last few years, extensive developments were made of combined magnetic resonance imaging and relaxation measurements in different fields.

Magnetic resonance imaging and relaxation analysis to predict noninvasively and nondestructively salt-to-moisture ratios in dry-cured meat.

The current systems are unable to control and predict the cured meat composition nondestructively and in a reasonable time for production needs. In this work, T1 and T2 maps were obtained, with a monoexponential model, on internal sections of Longissimus dorsi muscle at increasing salting times. The maps allow one to visualize the salting process nondestructively and noninvasively. The method goes beyond the simple qualitative visualization, because, for each section of the sample and in any region of the section, it is possible to obtain quantitative information on the progress of salting and to predict salt-to-moisture ratios. In addition, detailed relaxation measurements were performed on samples cored after imaging in order to define better the relaxation properties of the dry-cured meat.