RESUMEN
Extreme ultraviolet (XUV) and X-ray free-electron lasers enable new scientific opportunities. Their ultra-intense coherent femtosecond pulses give unprecedented access to the structure of undepositable nanoscale objects and to transient states of highly excited matter. In order to probe the ultrafast complex light-induced dynamics on the relevant time scales, the multi-purpose end-station CAMP at the free-electron laser FLASH has been complemented by the novel multilayer-mirror-based split-and-delay unit DESC (DElay Stage for CAMP) for time-resolved experiments. XUV double-pulses with delays adjustable from zero femtoseconds up to 650â picoseconds are generated by reflecting under near-normal incidence, exceeding the time range accessible with existing XUV split-and-delay units. Procedures to establish temporal and spatial overlap of the two pulses in CAMP are presented, with emphasis on the optimization of the spatial overlap at long time-delays via time-dependent features, for example in ion spectra of atomic clusters.
RESUMEN
Laser produced plasma sources are considered attractive for high-volume extreme-ultraviolet (EUV) lithography because of their high power at the target wavelength 13.5 nm. However, besides the required EUV light, a large amount of infrared (IR) light from the CO2 drive laser is scattered and reflected from the plasma as well as from the EUV mirrors in the optical system. Since these mirrors typically consist of molybdenum and silicon, the reflectance at IR wavelengths is even higher than in the EUV, which leads to high energy loads in the optical system. One option to reduce this is to structure the EUV multilayer, in particular the collector mirror, with an IR grating that has a high IR-suppression in the zeroth order. In this paper, the characterization of such an optical element is reported, including the IR-diffraction efficiency, the EUV performance (reflectance and scattering), and the relevant surface roughness. The measurement results are directly linked to the individual manufacturing steps.
RESUMEN
Scattering resulting from interface imperfections critically affects the image contrast and optical throughput of multilayer coatings for 13.5 nm. To investigate the scattering mechanisms, at-wavelength scattering measurements in combination with atomic force microscopy are analyzed for an in-depth characterization of the roughness properties. The different impacts of substrate finish and intrinsic thin film roughness on the scattering distribution are separated and analyzed in detail. Furthermore, a novel approach to characterize the roughness of large extreme ultraviolet substrates is presented, based on light scattering measurements at 442 nm.
RESUMEN
Highly reflective Molybdenum/Silicon multilayer mirrors for 13.5 nm are characterized at-wavelength using a new laboratory size measurement system for EUV reflectance and scattering. Roughness analysis before and after coating by Atomic Force Microscopy indicates roughness enhancement as well as smoothing effects during thin film growth. The impact of the substrate finish and the deposition process onto the scattering distribution and scatter losses with regard to the specular reflectance is analyzed.
RESUMEN
We present a Michelson interferometer for 13.5 nm soft x-ray radiation. It is characterized in a proof-of-principle experiment using synchrotron radiation, where the temporal coherence is measured to be 13 fs. The curvature of the thin-film beam splitter membrane is derived from the observed fringe pattern. The applicability of this Michelson interferometer at intense free-electron lasers is investigated, particularly with respect to radiation damage. This study highlights the potential role of such Michelson interferometers in solid density plasma investigations using, for instance, extreme soft x-ray free-electron lasers. A setup using the Michelson interferometer for pseudo-Nomarski-interferometry is proposed.
RESUMEN
The extreme-ultraviolet (EUV)-induced oxidation of Mo/Si multilayer mirrors was characterized by several methods: EUV reflectivity, x-ray photoelectron spectroscopy, small-angle x-ray reflectometry, atomic force microscopy, and EUV scattering measurements. Based on the results of the different investigation techniques, an oxidation model was developed to explain the degradation of the mirrors under EUV radiation.
RESUMEN
Chromium-scandium (Cr-Sc) is a promising material combination for multilayer mirrors in the water window region. A possible x-ray source for laboratory use in this wavelength range is the nitrogen K(alpha) line at 3.16 nm. High reflectivities at this wavelength can be achieved with Cr-Sc multilayer mirrors if the interfaces between adjacent layers are smooth. The growth parameters of the magnetron sputtering process for these materials have been optimized. It is shown that the reflectivity of such mirrors can be considerably improved by the application of a proper bias voltage during film growth. The high quality of the multilayer films is demonstrated with copper K(alpha) x-ray reflection and transmission electron microscopy. The reflective properties of the multilayers close to the nitrogen K(alpha) line were measured with synchrotron radiation for different angles of incidence. Reflectivities between R = 5.9% for near-normal incidence (theta = 1.5 degrees) and R = 29.6% for theta = 59.9 degrees were measured.