Correlating Orbital Composition and Activity of LaMnxNi1-xO3 Nanostructures toward Oxygen Electrocatalysis.

The atomistic rationalization of the activity of transition metal oxides toward oxygen electrocatalysis is one of the most complex challenges in the field of electrochemical energy conversion. Transition metal oxides exhibit a wide range of structural and electronic properties, which are acutely dependent on composition and crystal structure. So far, identifying one or several properties of transition metal oxides as descriptors for oxygen electrocatalysis remains elusive. In this work, we performed a detailed experimental and computational study of LaMnxNi1-xO3 perovskite nanostructures, establishing an unprecedented correlation between electrocatalytic activity and orbital composition. The composition and structure of the single-phase rhombohedral oxide nanostructures are characterized by a variety of techniques, including X-ray diffraction, X-ray absorption spectroscopy, X-ray photoelectron spectroscopy, and electron microscopy. Systematic electrochemical analysis of pseudocapacitive responses in the potential region relevant to oxygen electrocatalysis shows the evolution of Mn and Ni d-orbitals as a function of the perovskite composition. We rationalize these observations on the basis of electronic structure calculations employing DFT with HSE06 hybrid functional. Our analysis clearly shows a linear correlation between the OER kinetics and the integrated density of states (DOS) associated with Ni and Mn 3d states in the energy range relevant to operational conditions. In contrast, the ORR kinetics exhibits a second-order reaction with respect to the electron density in Mn and Ni 3d states. For the first time, our study identifies the relevant DOS dominating both reactions and the importance of understanding orbital occupancy under operational conditions.

Ex situ Ge-doping of CZTS nanocrystals and CZTSSe solar absorber films.

Cu2ZnSn(S,Se)4 (CZTSSe) is a promising material for thin-film photovoltaics, however, the open-circuit voltage (VOC) deficit of CZTSSe prevents the device performance from exceeding 13% conversion efficiency. CZTSSe is a heavily compensated material that is rich in point defects and prone to the formation of secondary phases. The landscape of these defects is complex and some mitigation is possible by employing non-stoichiometric conditions. Another route used to reduce the effects of undesirable defects is the doping and alloying of the material to suppress certain defects and improve crystallization, such as with germanium. The majority of works deposit Ge adjacent to a stacked metallic precursor deposited by physical vapour deposition before annealing in a selenium rich atmosphere. Here, we use an established hot-injection process to synthesise Cu2ZnSnS4 nanocrystals of a pre-determined composition, which are subsequently doped with Ge during selenisation to aid recrystallisation and reduce the effects of Sn species. Through Ge incorporation, we demonstrate structural changes with a negligible change in the energy bandgap but substantial increases in the crystallinity and grain morphology, which are associated with a Ge-Se growth mechanism, and gains in both the VOC and conversion efficiency. We use surface energy-filtered photoelectron emission microscopy (EF-PEEM) to map the surface work function terrains and show an improved electronic landscape, which we attribute to a reduction in the segregation of low local effective work function (LEWF) Sn(II) chalcogenide phases.

Effect of Bioconjugation on the Reduction Potential of Heme Proteins.

The modification of protein surfaces employing cationic and anionic species enables the assembly of these biomaterials into highly sophisticated hierarchical structures. Such modifications can allow bioconjugates to retain or amplify their functionalities under conditions in which their native structure would be severely compromised. In this work, we assess the effect of this type of bioconjugation on the redox properties of two model heme proteins, that is, cytochrome c (CytC) and myoglobin (Mb). In particular, the work focuses on the sequential modification by 3-dimethylamino propylamine (DMAPA) and 4-nonylphenyl 3-sulfopropyl ether (S1) anionic surfactant. Bioconjugation with DMAPA and S1 are the initial steps in the generation of pure liquid proteins, which remain active in the absence of water and up to temperatures above 150 °C. Thin-layer spectroelectrochemistry reveals that DMAPA cationization leads to a distribution of bioconjugate structures featuring reduction potentials shifted up to 380 mV more negative than the native proteins. Analysis based on circular dichroism, MALDI-TOF mass spectrometry, and zeta potential measurements suggest that the shift in the reduction potentials are not linked to protein denaturation, but to changes in the spin state of the heme. These alterations of the spin states originate from subtle structural changes induced by DMAPA attachment. Interestingly, electrostatic coupling of anionic surfactant S1 shifts the reduction potential closer to that of the native protein, demonstrating that the modifications of the heme electronic configuration are linked to surface charges.

Surface activation of Pt nanoparticles synthesised by "hot injection" in the presence of oleylamine.

Oleylamine (OA) based "hot injection" colloidal synthesis offers a versatile approach to the synthesis of highly monodisperse metallic and multi-metallic alloyed nanostructures in the absence of potentially toxic and unstable phosphine compounds. For application in heterogeneous catalysis and electrocatalysis, the adsorbed OA species at the metal surfaces should be effectively removed without compromising the structure and composition of the nanostructures. Herein, we investigate the removal of OA from colloidal Pt nanoparticles through 1) "chemical methods" such as washing in acetic acid or ethanol, and ligand exchange with pyridine; and 2) thermal pre-treatment between 185 and 400 °C in air, H2 or Ar atmospheres. The electrochemical reactivity of Pt nanoparticles is acutely affected by the presence of surface organic impurities, making this material ideal for monitoring the effectiveness of OA removal. The results showed that thermal treatment in Ar at temperatures above 400 °C provides highly active particles, with reactivity comparable to the benchmark commercial catalyst, Pt/ETEK. The mechanism involved in thermal desorption of OA was also investigated by thermogravimetric analysis coupled to mass spectrometry (TGA-MS). Oxidation of HCOOH and adsorbed CO in acidic solution were used as test reactions to assess the Pt electrocatalytic activity.

Lactose as a "Trojan horse" for quantum dot cell transport.

A series of glycan-coated quantum dots were prepared to probe the effect of glycan presentation in intracellular localization in HeLa and SV40 epithelial cells. We show that glycan density mostly impacts on cell toxicity, whereas glycan type affects the cell uptake and intracellular localization. Moreover, we show that lactose can act as a "Trojan horse" on bi-functionalized QDs to help intracellular delivery of other non-internalizable glycan moieties and largely avoid the endosomal/lysosomal degradative pathway.

Activating Mn Sites by Ni Replacement in α-MnO2.

Transition metal oxides are characterized by an acute structure and composition dependent electrocatalytic activity toward the oxygen evolution (OER) and oxygen reduction (ORR) reactions. For instance, Mn containing oxides are among the most active ORR catalysts, while Ni based compounds tend to show high activity toward the OER in alkaline solutions. In this study, we show that incorporation of Ni into α-MnO2, by adding Ni precursor into the Mn-containing hydrothermal solution, can generate distinctive sites with different electronic configurations and contrasting electrocatalytic activity. The structure and composition of the Ni modified hollandite α-MnO2 phase were investigated by X-ray absorption spectroscopy (XAS), X-ray diffraction (XRD), transmission electron microscopy coupled to energy-dispersive X-ray spectroscopy (TEM-EDX), inductively coupled plasma-optical emission spectroscopy (ICP-OES), and X-ray photoelectron spectroscopy (XPS). Our analysis suggests that Mn replacement by Ni into the α-MnO2 lattice (site A) occurs up to approximately 5% of the total Mn content, while further increasing Ni content promotes the nucleation of separate Ni phases (site B). XAS and XRD show that the introduction of sites A and B have a negligible effect on the overall Mn oxidation state and bonding characteristics, while very subtle changes in the XPS spectra appear to suggest changes in the electronic configuration upon Ni incorporation into the α-MnO2 lattice. On the other hand, changes in the electronic structure promoted by site A have a significant impact in the pseudocapacitive responses obtained by cyclic voltammetry in KOH solution at pH 13, revealing the appearance of Mn 3d orbitals at the energy (potential) range relevant to the ORR. The evolution of Mn 3d upon Ni replacement significantly increases the catalytic activity of α-MnO2 toward the ORR. Interestingly, the formation of segregated Ni phases (site B) leads to a decrease in the ORR activity while increasing the OER rate.

Correlating Molecular Precursor Interactions with Device Performance in Solution-Processed Cu2ZnSn(S,Se)4 Thin-Film Solar Cells.

Research efforts aimed at improving the crystal quality of solution-processed Cu2ZnSn(S,Se)4 (CZTSSe) absorbers have largely employed delicate pre- and postprocessing strategies, such as multistep selenization, heat treatment in mixed chalcogen atmospheres, and multinary extrinsic doping that are often complex and difficult to reproduce. On the other hand, understanding and tuning chemical interactions in precursor inks prior to the thin-film deposition have received significantly less attention. Herein, we show for the first time how the complexation of metallic and chalcogen precursors in solution have a stark influence on the crystallization and optoelectronic quality of CZTSSe absorbers. By varying thiourea to metal cation ratios (TU/M) in dimethylformamide (DMF) and isopropyl alcohol (IPA)-based inks, we observed the formation of nanoscale metal-organic complexes and submicron size aggregates which play a key role in the morphology of the precursor layers obtained by spin-coating and drying steps. We also identify the primary cations in the complexation and assembling processes in solution. The morphology of the precursor film, in turn, has an important effect on grain growth and film absorber structure after the reactive annealing in the presence of Se. Finally, we establish a link between metal complexes in precursor solutions and device performance, with power conversion efficiency increasing from approximately 2 to 8% depending on the TU/M and Cu/(Zn + Sn) ratios.

Redox transitions in an electrolyte-free myoglobin fluid.

Redox responses associated with the heme prosthetic group in a myoglobin-polymer surfactant solvent-free liquid are investigated for the first time in the absence of an electrolyte solution. Cyclic voltammograms from the biofluid exhibit responses that are consistent with planar diffusion of mobile charges in the melt. Temperature-dependent dynamic electrochemical and rheological responses are rationalized in terms of the effective electron hopping rate between heme centers and the transport of intrinsic ionic species in the viscous protein liquid.

Recent Developments in Atomic Layer Deposition of Functional Overlayers in Perovskite Solar Cells.

Over the last decade, research in organic-inorganic lead halide perovskite solar cells (PSCs) has gathered unprecedented momentum, putting the technology on the brink of full-scale commercialization. A wide range of strategies have been implemented for enhancing the power conversion efficiency of devices and modules, as well as improving stability toward high levels of irradiation, temperature, and humidity. Another key element in the path to commercialization is the scalability of device manufacturing, which requires large-scale deposition of conformal layers without compromising the delicate structure of the perovskite film. In this context, atomic layer deposition (ALD) tools excel in depositing high-quality conformal films with precise control of film composition and thickness over large areas at relatively low processing temperatures. In this commentary, we will briefly outline recent progress in PSC technology enabled by ALD tools, focusing on layers deposited above the absorber layer. These interlayers include charge transport layers, passivation layers, buffer layers, and encapsulation techniques. Additionally, we will discuss some of the challenges and potential avenues for research in PSC technology underpinned by ALD tools.

Contrast in electron-transfer mediation between graphene oxide and reduced graphene oxide.

The properties of graphene oxide (GO) and DNA-stabilised reduced graphene-oxide (rGO) sheets as electron-transfer mediators in partially blocked electrodes are evaluated employing electrochemical impedance spectroscopy. Evidences obtained from UV/Vis, Raman and FTIR spectroscopies, as well as atomic force microscopy, confirm that the reduction of exfoliated GO single sheets by hydrazine yields partially reduced graphene oxide featuring a high defect density. Two-dimensional assemblies of GO and rGO were formed through electrostatic adsorption at Au electrodes, sequentially modified with 11-mercaptoundecanoic acid (MUA) and poly-diallyldimethylammonium chloride (PDADMAC). The MUA:PDADMAC generates a strong blocking layer to the electron-transfer reaction involving the ferri/ferrocyanide redox couple. This blocking behaviour is not significantly affected upon adsorption of GO. However, adsorption of a sub-monolayer of rGO decreases the charge-transfer resistance by more than two orders of magnitude. Analysis of cyclic voltammograms and impedance spectra suggests that electron transfer in rGO assemblies is mediated by occupied states located just below the redox Fermi energy of the probe. These findings are discussed in the context of on-going controversies regarding the electrochemical reactivity of sp(2)-carbon basal planes.

Decoupling the impact of bulk and surface point defects on the photoelectrochemical properties of LaFeO3 thin films.

Point defects (PDs) play a key role in the properties of semiconductor photoelectrodes, from doping density to carrier mobility and lifetime. Although this issue has been extensively investigated in the context of photovoltaic absorbers, the role of PDs in photoelectrodes for solar fuels remains poorly understood. In perovskite oxides such as LaFeO3 (LFO), PDs can be tuned by changing the cation ratio, cation substitution and oxygen content. In this paper, we report the first study on the impact of bulk and surface PDs on the photoelectrochemical properties of LFO thin films. We independently varied the La : Fe ratio, within 10% of the stoichiometric value, in the bulk and at the surface by tuning the precursor composition as well as selective acid etching. The structure and composition of thin films deposited by sol-gel methods were investigated by SEM-EDX, ICP-OES, XPS and XRD. Our analysis shows a correlation between the binding energies of Fe 2p3/2 and O 1s, establishing a link between the oxidation state of Fe and the covalency of the Fe-O bond. Electrochemical studies reveal the emergence of electronic states close to the valence band edge with decreasing bulk Fe content. DFT calculations confirm that Fe vacancies generate states located near the valence band, which act as hole-traps and recombination sites under illumination. Dynamic photocurrent responses associated with oxygen reduction and hydrogen evolution show that the stoichiometric La : Fe ratio provides the most photoactive oxide; however, this can only be achieved by independently tuning the bulk and surface compositions of the oxide.

Mapping the Energetics of Defect States in Cu2ZnSnS4 films and the Impact of Sb Doping.

The sub-bandgap levels associated with defect states in Cu2ZnSnS4 (CZTS) thin films are investigated by correlating the temperature dependence of the absorber photoluminescence (PL) with the device admittance spectroscopy. CZTS thin films are prepared by thermolysis of molecular precursors incorporating chloride salts of the cations and thiourea. Na and Sb are introduced as dopants in the precursor layers to assess their impact on Cu/Zn and Sn site disorder, respectively. Systematic analysis of PL spectra as a function of excitation power and temperature show that radiative recombination is dominated by quasi-donor-acceptor pairs (QDAP) with a maximum between 1.03 and 1.18 eV. It is noteworthy that Sb doping leads to a transition from localized to delocalized QDAP. The activation energies obtained associated with QDAP emission closely correlate with the activation energies of the admittance responses in a temperature range between 150 K and room temperature in films with or without added dopants. Admittance data of CZTS films with no added dopants also have a strong contribution from a deeper state associated with Sn disorder. The ensemble of PL and admittance data, in addition to energy-filtered photoemission of electron microscopy (EF-PEEM), shows a detailed picture of the distribution of sub-bandgap states in CZTS and the impact of doping on their energetics and device performance.

Electrochemical properties of two dimensional assemblies of insulating diamond particles.

The electrochemical properties of two-dimensional assemblies of 500 nm type Ib diamond particles are investigated as a function of their surface oxidation state. High Pressure High Temperature particles are sequentially exposed to a hot strong acid bath and to H(2) plasma in order to generate oxygen (ODP) and hydrogen surface terminations (HDP). Changes in the surface composition following the chemical treatments are confirmed by FTIR. Electrophoretic mobility measurements show that the diamond particles exhibit a negative surface charge at pH above 7 independently of the surface termination. Oxidation in the acid bath and subsequent reduction in the H(2) plasma only affects about 30% of the particle surface charge. The intrinsic negative charge allows the formation of 2D assemblies by electrostatic adsorption on poly(diallyldimethylammonium chloride) (PDADMAC) modified In-doped SnO(2) electrodes (ITO). The particle number density in the assembly was controlled by the adsorption time up to a maximum coverage of ca. 40%. Cyclic voltammetry in the absence of redox species in solution show that the acid treatment effectively removes responses associated with sp(2) carbon impurities, resulting in a potential independent capacitive signal. On the other hand, HDP assemblies are characterized by a charging process at a potential above 0.1 V vs Ag/AgCl. These responses are associated with hole-injection into the valence band edge which is shifted to approximately -4.75 eV vs vacuum upon hydrogenation. Information concerning the position of the valence band edge as well as hole number density at the HDP surface as a function of the applied potential are extracted from the electrochemical analysis.

Electrochemical charge transfer mediated by metal nanoparticles and quantum dots.

Electron transfer processes mediated by nanostructured materials assembled at electrode surfaces underpin fundamental processes in novel electrochemical sensors, light energy conversion systems and molecular electronics. Functionalisation of electrode surfaces with hierarchical architectures incorporating self-assembling molecular systems and materials, such as metal nanostructures, quantum dots, carbon nanotubes, graphene or biomolecules have been intensively studied over the last 20 years. Important steps have been made towards the rationalisation of the charge transfer dynamics from redox species in solution across molecular self-assembling systems to electrode surfaces. For instance, a unified picture has emerged describing the factors which determine the rate constant for electron transfer processes across rigid self-assembling molecular barriers. An increasing bulk of evidence has recently shown that the incorporation of nanomaterials into self-assembling monolayers leads to an entirely different electrochemical behaviour. This perspective rationalises some of the key observations associated with nanoparticle mediated charge transfer, such as the apparent distance independent charge transfer resistance observed for redox species in solution. This behaviour only manifests itself clearly in the case where the probability of direct charge transfer from the redox probe to the electrode is strongly attenuated by self-assembling molecular barriers. Here we will highlight specific issues concerning self-assembled monolayers as blocking barriers prior to discussing the effect of nanoparticles on the electrochemical response of the system. Selected examples will provide conclusive evidence that the extent of charge transfer mediation is determined by the overlap between the density of states of the nanostructures and the energy levels of redox species in solution. Only in the case where a strong overlap exists between the energy levels of the two components, the nanostructures behave as "electron launchers", allowing efficient charge transfer across insulating molecular layers.

Tuning electrochemical rectification via quantum dot assemblies.

A novel approach to tuning electrochemical rectification using 2D assemblies of quantum dots (QDs) is presented. Asymmetric enhancement of the oxidation and reduction currents in the presence of the Fe(CN)(6)(3-/4-) redox couple is observed upon adsorption of QDs at thiol-modified Au electrodes. The extent of the electrochemical rectification is dependent on the average QD size. A molecular blocking layer is generated by self-assembling 11-mercaptoundecanoic acid (MUA) and an ultrathin film of poly(diallyldimethylammonium chloride) (PDADMAC) on the electrode. The polycationic film allows the electrostatic adsorption of 3-mercaptopropionic acid (MPA)-stabilized CdTe QDs, generating 2D assemblies with approximately 0.4% coverage. The QD adsorption activates a fast charge transfer across the blocking layer in which the reduction process is more strongly enhanced than the oxidation reaction. The partial electrochemical rectification is rationalized in terms of the relative position of the valence (VB) and conduction band (CB) edges with respect to the redox Fermi energy (ε(redox)). Quantitative analysis of the exchange current density obtained from electrochemical impedance spectroscopy demonstrates that the enhancement of charge transport across the molecular barrier is strongly dependent on the position of the QD valence band edge relative to ε(redox). The average electron tunneling rate constant through the QD assemblies is estimated on the basis of the Gerischer model for electron transfer.

Promoting Active Electronic States in LaFeO3 Thin-Films Photocathodes via Alkaline-Earth Metal Substitution.

The effects of alkaline-earth metal cation (AMC; Mg2+, Ca2+, Sr2+, and Ba2+) substitution on the photoelectrochemical properties of phase-pure LaFeO3 (LFO) thin-films are elucidated by X-ray photoemission spectroscopy (XPS), X-ray diffraction (XRD), diffuse reflectance, and electrochemical impedance spectroscopy (EIS). XRD confirms the formation of single-phase cubic LFO thin films with a rather complex dependence on the nature of the AMC and extent of substitution. Interestingly, subtle trends in lattice constant variations observed in XRD are closely correlated with shifts in the binding energies of Fe 2p3/2 and O 1s orbitals associated with the perovskite lattice. We establish a scaling factor between these two photoemission peaks, unveiling key correlation between Fe oxidation state and Fe-O covalency. Diffuse reflectance shows that optical transitions are little affected by AMC substitution below 10%, which are dominated by a direct bandgap transition close to 2.72 eV. Differential capacitance data obtained from EIS confirm the p-type characteristic of pristine LFO thin-films, revealing the presence of sub-bandgap electronic state (A-states) close to the valence band edge. The density of A-states is decreased upon AMC substitution, while the overall capacitance increases (increase in dopant level) and the apparent flat-band potential shifts toward more positive potentials. This behavior is consistent with the change in the valence band photoemission edge. In addition, capacitance data of cation-substituted films show the emergence of deeper states centered around 0.6 eV above the valence band edge (B-states). Photoelectrochemical responses toward the hydrogen evolution and oxygen reduction reactions in alkaline solutions show a complex dependence on alkaline-earth metal incorporation, reaching incident-photon-to-current conversion efficiency close to 20% in oxygen saturated solutions. We rationalize the photoresponses of the LFO films in terms of the effect sub-bandgap states on majority carrier mobility, charge transfer, and recombination kinetics.