Bioglues Based on an Elastin-Like Recombinamer: Effect of Tannic Acid as an Additive on Tissue Adhesion and Cytocompatibility.

More than 260 million surgical procedures are performed worldwide each year. Although sutures and staples are widely used to reconnect tissues, they can cause further damage and increase the risk of infection. Bioadhesives have been proposed as an alternative to reconnect tissues. However, clinical adhesives that combine strong adhesion with cytocompatibility have yet to be developed. In this study, we explored the production of adhesives based on protein-engineered polymers bioinspired by the sequence of elastin (i.e., elastin-like recombinamers, ELRs). We hypothesized that the combination of polyphenols (i.e., tannic acid, TA) and ELRs would produce an adhesive coacervate (ELR+TA), as reported for other protein polymers such as silk fibroin (SF). Notably, the adhesion of ELR alone surpassed that of ELR+TA. Indeed, ELR alone achieved adhesive strengths of 88.8 ± 33.2 kPa and 17.0 ± 2.0 kPa on porcine bone and skin tissues, respectively. This surprising result led us to explore a multicomponent bioadhesive to encompass the complementary roles of elastin (mimicked here by ELR) and silk fibroin (SF), and subsequently mirror more closely the multicomponent nature of the extracellular matrix. Tensile testing showed that ELR+SF achieved an adhesive strength of 123.3 ± 60.2 kPa on porcine bone and excellent cytocompatibility. To express this in a more visual and intuitive way, a small surface of only 2.5 cm2 was able to lift at least 2 kg of weight. This opens the door for further studies focusing on the ability of protein-engineered polymers to adhere to biological tissues without further chemical modification for applications in tissue engineering.

Self-Assembling Elastin-Like Hydrogels for Timolol Delivery: Development of an Ophthalmic Formulation Against Glaucoma.

This work focuses on improving the effectiveness of current therapies against glaucoma by incorporating self-assembled polymers into the ophthalmic formulation. To that end, we first studied the influence of the dispersing medium on the mechanical performance of self-assembling elastin-like (EL) and silk-elastin-like (SEL) hydrogels by conducting rheological tests. These polymers were subsequently incorporated into the antiglaucoma formulation, which contains timolol maleate (TM) as active ingredient, and in vivo tests, namely adhesion tests and intraocular pressure measurements (IOP), were performed in New Zealand rabbits. An enhanced reduction in IOP due to the presence of the polymers was observed. Moreover, differences in the effectiveness between both EL- and SEL-hydrogels, which can be explained on the basis of the different rheological properties displayed by these two systems, were also encountered. The results point to the potential of this system as a basis for the development of an ophthalmic formulation against glaucoma.

Nanotechnological Approaches to Therapeutic Delivery Using Elastin-Like Recombinamers.

This Review discusses the use of elastin-like polymers and their recombinant version, elastin-like recombinamers, in drug-delivery systems. These macromolecules exhibit a number of interesting properties that are rarely found together in any other family of materials, especially extremely high biocompatibility, high bioactivity and functionality, complex yet fully controlled composition, and stimuli responsiveness. Appropriate design of these molecules opens up a broad range of different possibilities for their use in new therapeutic platforms. The first of these described herein is the use of ELRs in single-molecule devices as therapeutic entities in their own right. Subsequently, we describe how the self-assembly properties of these materials can be exploited to create nanocarriers and, eventually, microcarriers that are able to temporally and spatially control and direct the release of their drug load. Intracellular drug-delivery devices and nanocarriers for treating cancer are among the uses described in that section. Finally, the use of ELRs as base materials for implantable drug depots, in the form of hydrogels, is discussed.

Amphiphilic Elastin-Like Block Co-Recombinamers Containing Leucine Zippers: Cooperative Interplay between Both Domains Results in Injectable and Stable Hydrogels.

Many biological processes are regulated by reversible binding events, with these interactions between macromolecules representing the core of dynamic chemistry. As such, any attempt to gain a better understanding of such interactions, which would pave the way to the extrapolation of natural designs to create new advanced systems, is clearly of interest. This work focuses on the development of a leucine zipper-elastin-like recombinamer (ZELR) in order to elucidate the behavior of such domains when coexisting along the same molecule and to engineer reversible, injectable and stable hydrogels. The unique propensity of the Z-moiety selected to dimerize, together with the thermosensitive behavior of the ELR, which has been constructed as a thermosensitive amphiphilic tetrablock, has been engineered into a single recombinant molecule. In this molecular design, the Z-moieties are unable to form a network, while the ELR is below its Tt, thus, guaranteeing the liquid-like state of the system. However, this situation changes rapidly as the temperature increases above Tt, where a stable hydrogel is formed, as demostrated by rheological tests. The inability of the ELR molecule (without Z-domains) to form such a stable hydrogel above Tt clearly points to a positive cooperative effect between these two domains (Z and EL), and no conformational changes in the former are involved, as demonstrated by circular dichroism analysis. AFM shows that Z-motifs seem to induce the aggregation of micelles, which supports the enhanced stability displayed by ZELRs when compared to ELR at the macroscale level. To the best of our knowledge, this is the first time that such an interplay between these two domains has been reported. Furthermore, the cytocompatibility of the resulting hydrogels opens the door to their use in biomedical applications.

Self-organized ECM-mimetic model based on an amphiphilic multiblock silk-elastin-like corecombinamer with a concomitant dual physical gelation process.

Although significant progress has been made in the area of injectable hydrogels for biomedical applications and model cell niches, further improvements are still needed, especially in terms of mechanical performance, stability, and biomimicry of the native fibrillar architecture found in the extracellular matrix (ECM). This work focuses on the design and production of a silk-elastin-based injectable multiblock corecombinamer that spontaneously forms a stable physical nanofibrillar hydrogel under physiological conditions. That differs from previously reported silk-elastin-like polymers on a major content and predominance of the elastin-like part, as well as a more complex structure and behavior of such a part of the molecule, which is aimed to obtain well-defined hydrogels. Rheological and DSC experiments showed that this system displays a coordinated and concomitant dual gelation mechanism. In a first stage, a rapid, thermally driven gelation of the corecombinamer solution takes place once the system reaches body temperature due to the thermal responsiveness of the elastin-like (EL) parts and the amphiphilic multiblock design of the corecombinamer. A bridged micellar structure is the dominant microscopic feature of this stage, as demonstrated by AFM and TEM. Completion of the initial stage triggers the second, which is comprised of a stabilization, reinforcement, and microstructuring of the gel. FTIR analysis shows that these events involve the formation of ß-sheets around the silk motifs. The emergence of such ß-sheet structures leads to the spontaneous self-organization of the gel into the final fibrous structure. Despite the absence of biological cues, here we set the basis of the minimal structure that is able to display such a set of physical properties and undergo microscopic transformation from a solution to a fibrous hydrogel. The results point to the potential of this system as a basis for the development of injectable fibrillar biomaterial platforms toward a fully functional, biomimetic, artificial extracellular matrix, and cell niches.

Lifelike Transformative Materials for Biohybrid Implants: Inspired by Nature, Driven by Technology.

Today's living world is enriched with a myriad of natural biological designs, shaped by billions of years of evolution. Unraveling the construction rules of living organisms offers the potential to create new materials and systems for biomedicine. From the close examination of living organisms, several concepts emerge: hierarchy, pattern repetition, adaptation, and irreducible complexity. All these aspects must be tackled to develop transformative materials with lifelike behavior. This perspective article highlights recent progress in the development of transformative biohybrid systems for applications in the fields of tissue regeneration and biomedicine. Advances in computational simulations and data-driven predictions are also discussed. These tools enable the virtual high-throughput screening of implant design and performance before committing to fabrication, thus reducing the development time and cost of biomimetic and biohybrid constructs. The ongoing progress of imaging methods also constitutes an essential part of this matter in order to validate the computation models and enable longitudinal monitoring. Finally, the current challenges of lifelike biohybrid materials, including reproducibility, ethical considerations, and translation, are discussed. Advances in the development of lifelike materials will open new biomedical horizons, where perhaps what is currently envisioned as science fiction will become a science-driven reality in the future.

Bio-Inspired Fiber Reinforcement for Aortic Valves: Scaffold Production Process and Characterization.

The application of tissue-engineered heart valves in the high-pressure circulatory system is still challenging. One possible solution is the development of biohybrid scaffolds with textile reinforcement to achieve improved mechanical properties. In this article, we present a manufacturing process of bio-inspired fiber reinforcement for an aortic valve scaffold. The reinforcement structure consists of polyvinylidene difluoride monofilament fibers that are biomimetically arranged by a novel winding process. The fibers were embedded and fixated into electrospun polycarbonate urethane on a cylindrical collector. The scaffold was characterized by biaxial tensile strength, bending stiffness, burst pressure and hemodynamically in a mock circulation system. The produced fiber-reinforced scaffold showed adequate acute mechanical and hemodynamic properties. The transvalvular pressure gradient was 3.02 ± 0.26 mmHg with an effective orifice area of 2.12 ± 0.22 cm2. The valves sustained aortic conditions, fulfilling the ISO-5840 standards. The fiber-reinforced scaffold failed in a circumferential direction at a stress of 461.64 ± 58.87 N/m and a strain of 49.43 ± 7.53%. These values were above the levels of tested native heart valve tissue. Overall, we demonstrated a novel manufacturing approach to develop a fiber-reinforced biomimetic scaffold for aortic heart valve tissue engineering. The characterization showed that this approach is promising for an in situ valve replacement.

Silk Fibroin as Adjuvant in the Fabrication of Mechanically Stable Fibrin Biocomposites.

Fibrin is a very attractive material for the development of tissue-engineered scaffolds due to its exceptional bioactivity, versatility in the fabrication, affinity to cell mediators; and the possibility to isolate it from blood plasma, making it autologous. However, fibrin application is greatly limited due to its low mechanical properties, fast degradation, and strong contraction in the presence of cells. In this study, we present a new strategy to overcome these drawbacks by combining it with another natural polymer: silk fibroin. Specifically, we fabricated biocomposites of fibrin (5 mg/mL) and silk fibroin (0.1, 0.5 and 1% w/w) by using a dual injection system, followed by ethanol annealing. The shear elastic modulus increased from 23 ± 5 Pa from fibrin alone, to 67 ± 22 Pa for fibrin/silk fibroin 0.1%, 241 ± 67 Pa for fibrin/silk fibroin 0.5% and 456 ± 32 Pa for fibrin/silk fibroin 1%. After culturing for 27 days with strong contractile cells (primary human arterial smooth muscle cells), fibrin/silk fibroin 0.5% and fibrin/silk fibroin 1% featured minimal cell-mediated contraction (ca. 15 and 5% respectively) in contrast with the large surface loss of the pure fibrin scaffolds (ca. 95%). Additionally, the composites enabled the formation of a proper endothelial cell layer after culturing with human primary endothelial cells under standard culture conditions. Overall, the fibrin/silk fibroin composites, manufactured within this study by a simple and scalable biofabrication approach, offer a promising avenue to boost the applicability of fibrin in tissue engineering.

Biohybrid elastin-like venous valve with potential for in situ tissue engineering.

Chronic venous insufficiency (CVI) is a leading vascular disease whose clinical manifestations include varicose veins, edemas, venous ulcers, and venous hypertension, among others. Therapies targeting this medical issue are scarce, and so far, no single venous valve prosthesis is clinically available. Herein, we have designed a bi-leaflet transcatheter venous valve that consists of (i) elastin-like recombinamers, (ii) a textile mesh reinforcement, and (iii) a bioabsorbable magnesium stent structure. Mechanical characterization of the resulting biohybrid elastin-like venous valves (EVV) showed an anisotropic behavior equivalent to the native bovine saphenous vein valves and mechanical strength suitable for vascular implantation. The EVV also featured minimal hemolysis and platelet adhesion, besides actively supporting endothelialization in vitro, thus setting the basis for its application as an in situ tissue engineering implant. In addition, the hydrodynamic testing in a pulsatile bioreactor demonstrated excellent hemodynamic valve performance, with minimal regurgitation (<10%) and pressure drop (<5 mmHg). No stagnation points were detected and an in vitro simulated transcatheter delivery showed the ability of the venous valve to withstand the implantation procedure. These results present a promising concept of a biohybrid transcatheter venous valve as an off-the-shelf implant, with great potential to provide clinical solutions for CVI treatment.

Advances in Engineering Venous Valves: The Pursuit of a Definite Solution for Chronic Venous Disease.

Native venous valves enable proper return of blood to the heart. Under pathological conditions (e.g., chronic venous insufficiency), venous valves malfunction and fail to prevent backward flow. Clinically, this can result in painful swelling, varicose veins, edema, and skin ulcerations leading to a chronic wound situation. Surgical correction of venous valves has proven to drastically reduce these symptoms. However, the absence of intact leaflets in many patients limits the applicability of this strategy. In this context, the development of venous valve replacements represents an appealing approach. Despite acceptable results in animal models, no venous valve has succeeded in clinical trials, and so far no single prosthetic venous valve is commercially available. This calls for advanced materials and fabrication approaches to develop clinically relevant venous valves able to restore natural flow conditions in the venous circulation. In this study, we critically discuss the approaches attempted in the last years, and we highlight the potential of tissue engineering to offer new avenues for valve fabrication. Impact statement Venous valves prosthesis offer the potential to restore normal venous flow, and to improve the prospect of patients that suffer from chronic venous disease. Current venous valve replacements are associated with poor outcomes. A deeper understanding of the approaches attempted so far is essential to establish the next steps toward valve development, and importantly, tissue engineering constitutes a unique toolbox to advance in this quest.

Fibrosis in tissue engineering and regenerative medicine: treat or trigger?

Fibrosis is a life-threatening pathological condition resulting from a dysfunctional tissue repair process. There is no efficient treatment and organ transplantation is in many cases the only therapeutic option. Here we review tissue engineering and regenerative medicine (TERM) approaches to address fibrosis in the cardiovascular system, the kidney, the lung and the liver. These strategies have great potential to achieve repair or replacement of diseased organs by cell- and material-based therapies. However, paradoxically, they might also trigger fibrosis. Cases of TERM interventions with adverse outcome are also included in this review. Furthermore, we emphasize the fact that, although organ engineering is still in its infancy, the advances in the field are leading to biomedically relevant in vitro models with tremendous potential for disease recapitulation and development of therapies. These human tissue models might have increased predictive power for human drug responses thereby reducing the need for animal testing.

Small Caliber Compliant Vascular Grafts Based on Elastin-Like Recombinamers for in situ Tissue Engineering.

Vascular disease is a leading cause of death worldwide, but surgical options are restricted by the limited availability of autologous vessels, and the suboptimal performance of prosthetic vascular grafts. This is especially evident for coronary artery by-pass grafts, whose small caliber is associated with a high occlusion propensity. Despite the potential of tissue-engineered grafts, compliance mismatch, dilatation, thrombus formation, and the lack of functional elastin are still major limitations leading to graft failure. This calls for advanced materials and fabrication schemes to achieve improved control on the grafts' properties and performance. Here, bioinspired materials and technical textile components are combined to create biohybrid cell-free implants for endogenous tissue regeneration. Clickable elastin-like recombinamers are processed to form an open macroporous 3D architecture to favor cell ingrowth, while being endowed with the non-thrombogenicity and the elastic behavior of the native elastin. The textile components (i.e., warp-knitted and electrospun meshes) are designed to confer suture retention, long-term structural stability, burst strength, and compliance. Notably, by controlling the electrospun layer's thickness, the compliance can be modulated over a wide range of values encompassing those of native vessels. The grafts support cell ingrowth, extracellular matrix deposition and endothelium development in vitro. Overall, the fabrication strategy results in promising off-the-shelf hemocompatible vascular implants for in situ tissue engineering by addressing the known limitations of bioartificial vessel substitutes.

Bio-Based Covered Stents: The Potential of Biologically Derived Membranes.

IMPACT STATEMENT: The use of bio-based materials (i.e., biologically derived materials that have either a biological origin, including engineered tissues, or a bio-inspired chemical composition) offers the potential to obtain covered stents (CS) with superior performance with respect to the currently available ones, which employ synthetic materials. This will advance and expand the clinical applicability of CS not only in the cardiovascular field but also for the treatment of other target areas such as segments of the respiratory, gastrointestinal, biliary, and urinary tracts.

Native aortic valve derived extracellular matrix hydrogel for three dimensional culture analyses with improved biomimetic properties.

INTRODUCTION: Calcific aortic valve disease (CAVD) is the most common acquired heart valve disease with complex underlying pathomechanisms that are yet not fully understood. Three-dimensional (3D) cell culture models as opposed to conventional two-dimensional (2D) techniques may reveal new aspects of CAVD and serve as a transitional platform between conventional 2D cell culture and in vivo experiments. METHODS: Here we report on fabrication and characterization of a novel 3D hydrogel derived from cell-free native aortic valves. A detailed analysis containing protein composition, rheological behavior, cytotoxic and proliferative effects as well as results of 3D cell culture experiments are presented. Moreover, this aortic valve derived hydrogel (AVdH) is compared to commercially available biological extracellular matrix (ECM) components to evaluate and classify AVdH with respect to other currently used ECM solutions, i.e. Collagen type I and Matrigel®. RESULTS: On the biochemical level, a complex composition of native proteins was detected. Using different techniques, including mass spectrometry with Gene Ontology network and enrichment analysis, different fundamental biological functions of AVdH were identified, including peptidase-, peptidase inhibitor-, growth- and binding activity. No cytotoxic effects were detected and AVdH showed positive effects on cell growth and proliferation in vitro when compared to Collagen type I and Matrigel®. CONCLUSION: These results suggest AVdH as an organotypic ECM supporting sophisticated 3D cell culture model studies, while mimicking the native environment of the aortic valve to a greater level for enhanced in vitro analyses.

Combining Catalyst-Free Click Chemistry with Coaxial Electrospinning to Obtain Long-Term, Water-Stable, Bioactive Elastin-Like Fibers for Tissue Engineering Applications.

Elastic fibers are a fundamental requirement for tissue-engineered equivalents of physiologically elastic native tissues. Here, a simple one-step electrospinning approach is developed, combining i) catalyst-free click chemistry, ii) coaxial electrospinning, and iii) recombinant elastin-like polymers as a relevant class of biomaterials. Water-stable elastin-like fibers are obtained without the use of cross-linking agents, catalysts, or harmful organic solvents. The fibers can be directly exposed to an aqueous environment at physiological temperature and their morphology maintained for at least 3 months. The bioactivity of the fibers is demonstrated with human vascular cells and the potential of the process for vascular tissue engineering is shown by fabricating small-diameter tubular fibrous scaffolds. Moreover, highly porous fluffy 3D constructs are obtained without the use of specially designed collectors or sacrificial materials, further supporting their applicability in the biomedical field. Ultimately, the strategy that is developed here may be applied to other click systems, contributing to expanding their potential in medical technology.

Macroporous click-elastin-like hydrogels for tissue engineering applications.

Elastin is a key extracellular matrix (ECM) protein that imparts functional elasticity to tissues and therefore an attractive candidate for bioengineering materials. Genetically engineered elastin-like recombinamers (ELRs) maintain inherent properties of the natural elastin (e.g. elastic behavior, bioactivity, low thrombogenicity, inverse temperature transition) while featuring precisely controlled composition, the possibility for biofunctionalization and non-animal origin. Recently the chemical modification of ELRs to enable their crosslinking via a catalyst-free click chemistry reaction, has further widened their applicability for tissue engineering. Despite these outstanding properties, the generation of macroporous click-ELR scaffolds with controlled, interconnected porosity has remained elusive so far. This significantly limits the potential of these materials as the porosity has a crucial role on cell infiltration, proliferation and ECM formation. In this study we propose a strategy to overcome this issue by adapting the salt leaching/gas foaming technique to click-ELRs. As result, macroporous hydrogels with tuned pore size and mechanical properties in the range of many native tissues were reproducibly obtained as demonstrated by rheological measurements and quantitative analysis of fluorescence, scanning electron and two-photon microscopy images. Additionally, the appropriate size and interconnectivity of the pores enabled smooth muscle cells to migrate into the click-ELR scaffolds and deposit extracellular matrix. The macroporous structure together with the elastic performance and bioactive character of ELRs, the specificity and non-toxic character of the catalyst-free click-chemistry reaction, make these scaffolds promising candidates for applications in tissue regeneration. This work expands the potential use of ELRs and click chemistry systems in general in different biomedical fields.

Recent contributions of elastin-like recombinamers to biomedicine and nanotechnology.

The emergence of the new scientific field known as nanomedicine is being catalyzed by multiple improvements in nanoscience techniques and significant progress in materials science, especially as regards the testing of novel and sophisticated biomaterials. This conjuncture has furthered the development of promising instruments in terms of detection, bioanalysis, therapy, diagnostics and imaging. Some of the most innovative new biomaterials are protein-inspired biomimetic materials in which modern biotechnology and genetic-engineering techniques complement the huge amount of information afforded by natural protein evolution to create advanced and tailor-made multifunctional molecules. Amongst these protein-based biomaterials, Elastin-like Recombinamers (ELRs) have demonstrated their enormous potential in the fields of biomedicine and nanoscience in the last few years. This broad applicability derives from their unmatched properties, particularly their recombinant and tailor-made nature, the intrinsic characteristics derived from their elastin-based origin (mainly their mechanical properties and ability to self-assemble as a result of their stimuli-responsive behavior), their proven biocompatibility and biodegradability, as well as their versatility as regards incorporating advanced chemical or recombinant modifications into the original structure that open up an almost unlimited number of multifunctional possibilities in this developing field. This article provides an updated review of the recent challenges overcome by using these recombinant biomaterials in the fields of nano- and biomedicine, ranging from nanoscale applications in surface modifications and self-assembled nanostructures to drug delivery and regenerative medicine.

Elastin-like recombinamers: biosynthetic strategies and biotechnological applications.

The past few decades have witnessed the development of novel naturally inspired biomimetic materials, such as polysaccharides and proteins. Likewise, the seemingly exponential evolution of genetic-engineering techniques and modern biotechnology has led to the emergence of advanced protein-based materials with multifunctional properties. This approach allows extraordinary control over the architecture of the polymer, and therefore, monodispersity, controlled physicochemical properties, and high sequence complexity that would otherwise be impossible to attain. Elastin-like recombinamers (ELRs) are emerging as some of the most prolific of these protein-based biopolymers. Indeed, their inherent properties, such as biocompatibility, smart nature, and mechanical qualities, make these recombinant polymers suitable for use in numerous biomedical and nanotechnology applications, such as tissue engineering, "smart" nanodevices, drug delivery, and protein purification. Herein, we present recent progress in the biotechnological applications of ELRs and the most important genetic engineering-based strategies used in their biosynthesis.

Recombinamers: combining molecular complexity with diverse bioactivities for advanced biomedical and biotechnological applications.

The rapid development of polymer science has led to literally thousands of different monomers and an almost endless number of possibilities arising from their combination. The most promising strategy to date has been to consider natural products as macromolecules that provide the best option for obtaining functional materials. Proteins, with their high levels of complexity and functionality, are one of the best examples of this approach. In addition, the development of genetic engineering has permitted the design and highly controlled synthesis of proteinaceous materials with complex and advanced functionalities. Elastin-like recombinamers (ELRs) are presented herein as an example of an extraordinary convergence of different properties that is not found in any other synthetic polymer system. These materials are highly biocompatible, stimuli-responsive, show unusual self-assembly properties, and can incorporate bioactive domains and other functionalities along the polypeptide chain. These attributes are an important factor in the development of biomedical and biotechnological applications such as tissue engineering, drug delivery, purification of recombinant proteins, biosensors or stimuli-responsive surfaces.