Conceptualising global water challenges: A transdisciplinary approach for understanding different discourses in sustainable development.

Global challenges impact upon substantial numbers of people in different locations and inform policy at multiple levels under the United Nation's Sustainable Development Goals (SDGs). An aspect of the SDGs framework is the stated inter-relationship between SDGs and local, regional and global partnerships for research and development. In response to dissatisfaction with existing approaches to addressing such complex problems the purpose of this paper is to propose a problem-language-context (PLC) model as a way of framing sustainable development challenges; and in so doing create a heuristic that allows challenges such as water security to be understood using a logically consistent framework. Such an approach builds on a growing transdisciplinary innovation literature that strives to generate knowledge that is problem-focused and inclusive of both scientific and societal stakeholders. The utility of the PLC model is then examined using a case study review carried out on a body of evidence - the United Nations World Water Development Reports (WWDRs) 2003-2019. The result of this review suggests that such problem framing can be of value in revealing the implicit (and sometimes contradictory) assumptions held by policy makers, practitioners and researchers. The main conclusion is that a transdisciplinary approach is one way of better understanding some of the conflicting viewpoints evident in discipline-based approaches to sustainable development, global water challenges and water security.

Reclamation of Real Urban Wastewater Using Solar Advanced Oxidation Processes: An Assessment of Microbial Pathogens and 74 Organic Microcontaminants Uptake in Lettuce and Radish.

In this study, disinfection of urban wastewater (UWW) with two solar processes (H2O2 -20 mg/L and photo-Fenton 10 mg/L-Fe2+/20 mg/L-H2O2 at natural water pH) at pilot scale using a 60 L compound parabolic collector reactor for irrigation of two raw-eaten vegetables (lettuce and radish) has been investigated. Several microbial targets (total coliforms, Escherichia coli, Salmonella spp., and Enterococcus spp.) naturally occurring in UWW and 74 organic microcontaminants (OMCs) were monitored. Disinfection results showed no significant differences between both processes, showing the following inactivation resistance order: Salmonella spp. < E. coli < total coliforms < Enterococcus spp. Reductions of target microorganisms to concentrations below the limit of detection (LOD) was achieved in all cases with cumulative solar UV energy per volume (QUV) ranged from 12 to 40 kJ/L (90 min to 5 h). Solar photo-Fenton showed a reduction of 66% of OMCs and solar/H2O2 of 56% in 5 h treatment. Irrigation of radish and lettuce with solar treated effluents, secondary effluents, and mineral water was performed for 6 and 16 weeks, respectively. The presence of bacteria was monitored in surfaces and uptake of leaves, fruit, and also in soil. The bacterial concentrations detected were below the LOD in the 81.2% (lettuce) and the 87.5% (radish) of the total number of samples evaluated. Moreover, uptake of OMCs was reduced above 70% in crops irrigated with solar treated effluents in comparison with secondary effluents of UWW.

Microbiological Evaluation of 5 L- and 20 L-Transparent Polypropylene Buckets for Solar Water Disinfection (SODIS).

BACKGROUND: Solar water disinfection (SODIS) is an appropriate technology for household treatment of drinking water in low-to-middle-income communities, as it is effective, low cost and easy to use. Nevertheless, uptake is low due partially to the burden of using small volume polyethylene terephthalate bottles (1.5-2 L). A major challenge is to develop a low-cost transparent container for disinfecting larger volumes of water. (2) Methods: This study examines the capability of transparent polypropylene (PP) buckets of 5 L- and 20 L- volume as SODIS containers using three waterborne pathogen indicators: Escherichia coli, MS2-phage and Cryptosporidium parvum. (3) Results: Similar inactivation kinetics were observed under natural sunlight for the inactivation of all three organisms in well water using 5 L- and 20 L-buckets compared to 1.5 L-polyethylene-terephthalate (PET) bottles. The PP materials were exposed to natural and accelerated solar ageing (ISO-16474). UV transmission of the 20 L-buckets remained stable and with physical integrity even after the longest ageing periods (9 months or 900 h of natural or artificial solar UV exposure, respectively). The 5 L-buckets were physically degraded and lost significant UV-transmission, due to the thinner wall compared to the 20 L-bucket. (4) Conclusion: This work demonstrates that the 20 L SODIS bucket technology produces excellent bacterial, viral and protozoan inactivation and is obtained using a simple transparent polypropylene bucket fabricated locally at very low cost ($2.90 USD per unit). The increased bucket volume of 20 L allows for a ten-fold increase in treatment batch volume and can thus more easily provide for the drinking water requirements of most households. The use of buckets in households across low to middle income countries is an already accepted practice.

Cross-Contamination of Residual Emerging Contaminants and Antibiotic Resistant Bacteria in Lettuce Crops and Soil Irrigated with Wastewater Treated by Sunlight/H2O2.

The sunlight/H2O2 process has recently been considered as a sustainable alternative option compared to other solar driven advanced oxidation processes (AOPs) in advanced treatment of municipal wastewater (WW) to be reused for crop irrigation. Accordingly, in this study sunlight/H2O2 was used as disinfection/oxidation treatment for urban WW treatment plant effluent in a compound parabolic collector photoreactor to assess subsequent cross-contamination of lettuce and soil by contaminants of emerging concern (CECs) (determined by QuEChERS extraction and LC-QqLIT-MS/MS analysis) and antibiotic resistant (AR) bacteria after irrigation with treated WW. Three CECs (carbamazepine (CBZ), flumequine (FLU), and thiabendazole (TBZ) at 100 µg L(-1)) and two AR bacterial strains (E. coli and E. faecalis, at 10(5) CFU mL(-1)) were spiked in real WW. A detection limit (DL) of 2 CFU mL(-1) was reached after 120 min of solar exposure for AR E. coli, while AR E. faecalis was more resistant to the disinfection process (240 min to reach DL). CBZ and TBZ were poorly removed after 90 min (12% and 50%, respectively) compared to FLU (94%). Lettuce was irrigated with treated WW for 5 weeks. CBZ and TBZ were accumulated in soil up to 472 ng g(-1) and 256 ng g(-1) and up-taken by lettuce up to 109 and 18 ng g(-1), respectively, when 90 min treated WW was used for irrigation; whereas no bacteria contamination was observed when the bacterial density in treated WW was below the DL. A proper treatment time (>90 min) should be guaranteed in order to avoid the transfer of pathogens from disinfected WW to irrigated crops and soil.

A review of heterogeneous photocatalysis for water and surface disinfection.

Photo-excitation of certain semiconductors can lead to the production of reactive oxygen species that can inactivate microorganisms. The mechanisms involved are reviewed, along with two important applications. The first is the use of photocatalysis to enhance the solar disinfection of water. It is estimated that 750 million people do not have accessed to an improved source for drinking and many more rely on sources that are not safe. If one can utilize photocatalysis to enhance the solar disinfection of water and provide an inexpensive, simple method of water disinfection, then it could help reduce the risk of waterborne disease. The second application is the use of photocatalytic coatings to combat healthcare associated infections. Two challenges are considered, i.e., the use of photocatalytic coatings to give "self-disinfecting" surfaces to reduce the risk of transmission of infection via environmental surfaces, and the use of photocatalytic coatings for the decontamination and disinfection of medical devices. In the final section, the development of novel photocatalytic materials for use in disinfection applications is reviewed, taking account of materials, developed for other photocatalytic applications, but which may be transferable for disinfection purposes.

Household slow sand filters in continuous and intermittent flows and their efficiency in microorganism's removal from river water.

This study aimed to evaluate the efficiency of four household slow sand filter (HSSF) models for the removal of microorganisms from river water throughout the development of their biological layers (schmutzdecke). Two models were designed to be operated continuously (HSSF-CC and HSSF-CT) and two intermittently (HSSF-ID and HSSF-IF). Filters were fed daily with 48 L pre-treated river water (24 h sedimentation followed by filtration through a non-woven synthetic blanket). Water samples were quantified by coliform group bacteria and analysed by bright field microscopy to visualize the microorganisms. Total coliform reduction was between 1.42 ± 0.59 log and 2.96 ± 0.58 log, with continuous models showing a better performance (p-values < 0.004). Escherichia coli reduction varied from 1.49 ± 0.58 log to 2.09 ± 0.66 log and HSSF-IF, HSSF-CC and HSSF-CT presented a similar performance (p-values > 0.06), slightly better than the one presented by HSSF-ID (p-value=0.04). Microorganisms, such as algae, protozoa and helminths were detected by microscopy in raw water and pre-treated water. Algae were the most significant group in these samples, although they were not visualized by bright field microscopy in the filtered water. Results showed the potential of HSSF in microbiological risk reduction from river water, which increases the range of point-of-use water treatments in rural communities. However, additional studies of the HSSF biological layer must be performed.

Household slow sand filter efficiency with schmutzdecke evaluation by microsensors.

Slow sand filtration is a common technology providing potable water in rural households across Latin America, Asia and Africa. Two PVC household slow sand filters (HSSF) were operated in continuous (C-HSSF) and intermittent (I-HSSF) flow modes for eight consecutive months. A non-woven blanket was installed on the fine sand top to facilitate cleaning with scheduled maintenance undertaken every 30 days. The efficiency of each HSSF was evaluated via physico-chemical indicators (reduction of turbidity and colour) with biological performance assessed via total coliform and E. coli enumeration post treatment. There were no statistically significant differences between the continuous flow and intermittent flow models for physical-chemical and total coliform reduction parameters. However, when evaluating E. coli, C-HSSF performed better (p = 0.02). The non-woven blanket was subjected to weekly analysis using a Clark-type amperometric microsensor (diameter < 20 µm), which measured dissolved oxygen (DO) concentration in the adherent biofilm. DO microprofiles illustrated a variation in biofilm growth, which were associated with a progressive increase in the HSSF efficiency. The maximum DO depletion value measured during several months of operation showed no significant difference between I-HSSF and C-HSSF (p = 0.98). The microsensor measurements provided unprecedented results in real time. These results can help to understand the efficiency of the filter in relation to the biofilm growth, the dissolved oxygen depletion and turbidity removal.

Worldwide Research Trends on Solar-Driven Water Disinfection.

"Ensure access to water for all", states Goal 6 of the UN's Sustainable Development Goals. This worldwide challenge requires identifying the best water disinfection method for each scenario. Traditional methods have limitations, which include low effectiveness towards certain pathogens and the formation of disinfection byproducts. Solar-driven methods, such as solar water disinfection (SODIS) or solar photocatalysis, are novel, effective, and financially and environmentally sustainable alternatives. We have conducted a critical study of publications in the field of water disinfection using solar energy and, hereby, present the first bibliometric analysis of scientific literature from Elsevier's Scopus database within the last 20 years. Results show that in this area of growing interest USA, Spain, and China are the most productive countries in terms of publishing, yet Europe hosts the most highly recognized research groups, i.e., Spain, Switzerland, Ireland, and UK. We have also reviewed the journals in which researchers mostly publish and, using a systematic approach to determine the actual research trends and gaps, we have analyzed the capacity of these publications to answer key research questions, pinpointing six clusters of keywords in relation to the main research challenges, open areas, and new applications that lie ahead. Most publications focused on SODIS and photocatalytic nanomaterials, while a limited number focused on ensuring adequate water disinfection levels, testing regulated microbial indicators and emerging pathogens, and real-world applications, which include complex matrices, large scale processes, and exhaustive cost evaluation.

UVC inactivation of MS2-phage in drinking water - Modelling and field testing.

UVC disinfection has been recognised by the WHO as an effective disinfection treatment to provide decentralized potable water. Under real conditions there are still unknowns that limit this application including the influence of suspended solids and natural organic matter. This work aims to investigate the influence of two key parameters, suspended solids and natural organic matter, on the efficiency of UVC disinfection of surface water to achieve the drinking water quality requirements established by the WHO for point of use (POU) technologies. Kaolinite (turbidity agent) and humic acids (HA, model of organic matter) were used in a factorial design of experiments (Turbidity from 0 to 5 NTU, and HA from 0 to 3.5 mg/L) to investigate their effect on UVC inactivation of MS2 phage in surface water. A collimated beam (12 W) and a commercial UVC disinfection flow system (16 W) designed to provide drinking water at households were used. The UVC flow system both in the laboratory and in the field was able to achieve the reduction requirements established by WHO (LRV >3.5 for all tested conditions), confirming the good performance of the studied UVC disinfection system. The results found in the lab were used to establish a numerical model that predicts the disinfection rate constant as a function of water turbidity and transmittance at 254 nm (confidence level>95%). The model permitted to elucidate the critical effect of low concentrations of HA in reducing the inactivation rate by 40% for 3.5 mg/L-HA compared with 0, the non-significant detrimental effect of turbidity lower than 5 NTU, and the lack of synergistic effects between both parameters at these levels. The UVC flow system was also tested in the field, in Tzabalho, Chiapas (Mexico), and Antioquia (Colombia), with spiked MS2 into natural surface water. This investigation opens a potential application to monitor the performance of UVC systems with surface water by monitoring transmittance at 254 nm as a tool to control UVC domestic systems to deliver safe drinking water in a household without the need of expensive and laborious biological monitoring tools.

A preliminary Ames fluctuation assay assessment of the genotoxicity of drinking water that has been solar disinfected in polyethylene terephthalate (PET) bottles.

Though microbially safe, concerns have been raised about the genotoxic/mutagenic quality of solar-disinfected drinking water, which might be compromised as a result of photodegradation of polyethylene terephthalate (PET) bottles used as SODIS reactors. This study assessed genotoxic risk associated with the possible release of genotoxic compounds into water from PET bottles during SODIS, using the Ames fluctuation test. Negative genotoxicity results were obtained for water samples that had been in PET bottles and exposed to normal SODIS conditions (strong natural sunlight) over 6 months. Under SODIS conditions, bottles were exposed to 6 h of sunlight, followed by overnight room temperature storage. They were then emptied and refilled the following day and exposed to sunlight again. Genotoxicity was detected after 2 months in water stored in PET bottles and exposed continuously (without refilling) to sunlight for a period ranging from 1 to 6 months. However, similar genotoxicity results were also observed for the dark control (without refill) samples at the same time-point and in no other samples after that time; therefore it is unlikely that this genotoxicity event is related to solar exposure.

Solar photocatalytic disinfection with immobilised TiO(2) at pilot-plant scale.

The photocatalytic disinfection efficiency has been investigated for two immobilized TiO(2) catalytic systems (wall reactor and fixed-bed reactor) in a solar pilot plant. Their performances have been compared with the use of a slurry reactor and the solar disinfection without catalyst. The use of photocatalytic TiO(2) wall reactors does no show clear benefits over the solar disinfection process in the absence of catalyst. The reason is that the efficiency of the solar disinfection is so high that the presence of titania in the reactor wall reduces the global efficiency due to the competition for the absorption of photons. As expected, the maximum efficiency was shown by the slurry TiO(2) reactor, due to the optimum contact between bacteria and catalyst. However, it is noticeable that the use of the fixed-bed reactor leads to inactivation rate quite close to that of the slurry, requiring comparable accumulated solar energy of about 6 kJ L(-1) to achieve a 6-log decrease in the concentration of viable bacteria and allowing a total disinfection of the water (below the detection limit of 1 CFU mL(-1)). Not only the high titania surface area of this configuration is responsible for the bacteria inactivation but the important contribution of the mechanical stress has to be considered. The main advantage of the fixed-bed TiO(2) catalyst is the outstanding stability, without deactivation effects after ten reaction cycles, being readily applicable for continuous water treatment systems.

Organic Microcontaminants in Tomato Crops Irrigated with Reclaimed Water Grown under Field Conditions: Occurrence, Uptake, and Health Risk Assessment.

In many regions, reuse of reclaimed water (RW) is a necessity for irrigation. The presence of organic microcontaminants (OMCs) in RW and their translocation to plants may represent a risk of human exposure. Nevertheless, information available about real field crops is scarce and focused on a limited number of compounds. The novelty of this work relies on the application of a wider-scope analytical approach based on a multianalyte target analysis (60 compounds) and a suspect screening (>1300 compounds). This methodology was applied to real field-grown tomato crops irrigated with RW. The study revealed the presence of 17 OMCs in leaves (0.04-32 ng g-1) and 8 in fruits (0.01-1.1 ng g-1), 5 of them not reported before in real field samples. A health-risk assessment, based on the toxicological threshold concern (TTC) concept, showed that RW irrigation applied under the conditions given does not pose any threat to humans.

Tertiary treatment of urban wastewater by solar and UV-C driven advanced oxidation with peracetic acid: Effect on contaminants of emerging concern and antibiotic resistance.

Photo-driven advanced oxidation process (AOP) with peracetic acid (PAA) has been poorly investigated in water and wastewater treatment so far. In the present work its possible use as tertiary treatment of urban wastewater to effectively minimize the release into the environment of contaminants of emerging concern (CECs) and antibiotic-resistant bacteria was investigated. Different initial PAA concentrations, two light sources (sunlight and UV-C) and two different water matrices (groundwater (GW) and wastewater (WW)) were studied. Low PAA doses were found to be effective in the inactivation of antibiotic resistant Escherichia coli (AR E. coli) in GW, with the UV-C process being faster (limit of detection (LOD) achieved for a cumulative energy (QUV) of 0.3 kJL-1 with 0.2 mg PAA L-1) than solar driven one (LOD achieved at QUV = 4.4 kJL-1 with 0.2 mg PAA L-1). Really fast inactivation rates of indigenous AR E. coli were also observed in WW. Higher QUV and PAA initial doses were necessary to effectively remove the three target CECs (carbamazepine (CBZ), diclofenac and sulfamethoxazole), with CBZ being the more refractory one. In conclusion, photo-driven AOP with PAA can be effectively used as tertiary treatment of urban wastewater but initial PAA dose should be optimized to find the best compromise between target bacteria inactivation and CECs removal as well as to prevent scavenging effect of PAA on hydroxyl radicals because of high PAA concentration.

Inactivation of E. coli and E. faecalis by solar photo-Fenton with EDDS complex at neutral pH in municipal wastewater effluents.

Photo-Fenton is a solar disinfection technology widely demonstrated to be effective to inactivate microorganisms in water by the combined effect of photoactivated iron species and the direct action of solar photons. Nevertheless, the precipitation of iron as ferric hydroxide at basic pH is the main disadvantage of this process. Thus, challenge in photo-Fenton is looking for alternatives to iron salts. Polycarboxylic acids, such as Ethylendiamine-N',N'-disuccinic acid (EDDS), can form strong complex with Fe3+ and enhance the dissolution of iron in natural water through photochemical process. The aim of this study was to evaluate the disinfection effectiveness of solar photo-Fenton with and without EDDS in water. Several reagent concentrations were assessed, best bacterial (Escherichia coli and Enterococcus faecalis) inactivation was obtained with 0.1:0.2:0.3 mM (Fe3+:EDDS:H2O2) in isotonic water. The benefit of using EDDS complexes to increase the efficiency of kept dissolved iron in water at basic pH was proven. Solar disinfection and H2O2/solar with and without EDDS, and Fe3+:EDDS complexes were also investigated. Bacterial inactivation results in municipal wastewater effluents (MWWE) demonstrated that the competitive role of organic matter and inorganic compounds strongly affect the efficacy of Fe3+:EDDS at all concentrations tested, obtaining the fastest inactivation kinetics with H2O2/solar (0.3 mM).

Hepatitis A Virus Disinfection in Water by Solar Photo-Fenton Systems.

This study evaluates and compares the effectiveness of solar photo-Fenton systems for the inactivation of hepatitis A virus (HAV) in water. The effect of solar irradiance, dark- Fenton reaction and three different reactant concentrations (2.5/5, 5/10 and 10/20 mg/L of Fe2+/H2O2) on the photo-Fenton process were tested in glass bottle reactors (200 mL) during 6 h under natural sunlight. Disinfection kinetics were determined both by RT-qPCR and infectivity assays. Mean water temperatures ranged from 25 to 27.3 °C, with a maximum local noon UV irradiances of 22.36 W/m2. Photo-Fenton systems yielded increased viral reduction rates in comparison with the isolated effect under the Fenton reaction in darkness (negligible viral reduction) or the solar radiation (0.25 Log of RNA reduction). With the highest concentration employed (10-20 mg/L Fe2+-H2O2), an average RNA reduction rate of ~ 1.8 Log (initial concentration of 105 pfu/mL) and a reduction of 80% in the infectivity capacity were reached. Results showed a strong synergistic effect between Fe2+/H2O2 and sunlight, demonstrating that significant disinfection rates of HAV under photo-Fenton systems may occur with relatively higher efficiency at middle environmental temperatures and without the need for an energy-intensive light source.

Solar treatment (H2O2, TiO2-P25 and GO-TiO2 photocatalysis, photo-Fenton) of organic micropollutants, human pathogen indicators, antibiotic resistant bacteria and related genes in urban wastewater.

Solar-driven advanced oxidation processes were studied in a pilot-scale photoreactor, as tertiary treatments of effluents from an urban wastewater treatment plant. Solar-H2O2, heterogeneous photocatalysis (with and/or without the addition of H2O2 and employing three different photocatalysts) and the photo-Fenton process were investigated. Chemical (sulfamethoxazole, carbamazepine, and diclofenac) and biological contaminants (faecal contamination indicators, their antibiotic resistant counterparts, 16S rRNA and antibiotic resistance genes), as well as the whole bacterial community, were characterized. Heterogeneous photocatalysis using TiO2-P25 and assisted with H2O2 (P25/H2O2) was the most efficient process on the degradation of the chemical organic micropollutants, attaining levels below the limits of quantification in less than 4 h of treatment (corresponding to QUV < 40 kJ L-1). This performance was followed by the same process without H2O2, using TiO2-P25 or a composite material based on graphene oxide and TiO2. Regarding the biological indicators, total faecal coliforms and enterococci and their antibiotic resistant (tetracycline and ciprofloxacin) counterparts were reduced to values close, or beneath, the detection limit (1 CFU 100 mL-1) for all treatments employing H2O2, even upon storage of the treated wastewater for 3-days. Moreover, P25/H2O2 and solar-H2O2 were the most efficient processes in the reduction of the abundance (gene copy number per volume of wastewater) of the analysed genes. However, this reduction was transient for 16S rRNA, intI1 and sul1 genes, since after 3-days storage of the treated wastewater their abundance increased to values close to pre-treatment levels. Similar behaviour was observed for the genes qnrS (using TiO2-P25), blaCTX-M and blaTEM (using TiO2-P25 and TiO2-P25/H2O2). Interestingly, higher proportions of sequence reads affiliated to the phylum Proteobacteria (Beta- and Gammaproteobacteria) were found after 3-days storage of treated wastewater than before its treatment. Members of the genera Pseudomonas, Rheinheimera and Methylotenera were among those with overgrowth.

Disinfection of drinking water contaminated with Cryptosporidium parvum oocysts under natural sunlight and using the photocatalyst TiO2.

The results of a batch-process solar disinfection (SODIS) and solar photocatalytic disinfection (SPCDIS) on drinking water contaminated with Cryptosporidium are reported. Cryptosporidium parvum oocyst suspensions were exposed to natural sunlight in Southern Spain and the oocyst viability was evaluated using two vital dyes [4',6-diamidino-2-phenylindole (DAPI) and propidium iodide (PI)]. SODIS exposures (strong sunlight) of 8 and 12h reduced oocyst viability from 98% (+/-1.3%) to 11.7% (+/-0.9%) and 0.3% (+/-0.33%), respectively. SODIS reactors fitted with flexible plastic inserts coated with TiO2 powder (SPCDIS) were found to be more effective than those which were not. After 8 and 16 h of overcast and cloudy solar irradiance conditions, SPCDIS reduced oocyst viability from 98.3% (+/-0.3%) to 37.7% (+/-2.6%) and 11.7% (+/-0.7%), respectively, versus to that achieved using SODIS of 81.3% (+/-1.6%) and 36.0% (+/-1.0%), respectively. These results confirm that solar disinfection of drinking water can be an effective household intervention against Cryptosporidium contamination.

Solar photocatalytic disinfection of agricultural pathogenic fungi (Curvularia sp.) in real urban wastewater.

The interest in developing alternative water disinfection methods that increase the access to irrigation water free of pathogens for agricultural purposes is increasing in the last decades. Advanced Oxidation Processes (AOPs) have been demonstrated to be very efficient for the abatement of several kind of pathogens in contaminated water. The purpose of the current study was to evaluate and compare the capability of several solar AOPs for the inactivation of resistant spores of agricultural fungi. Solar photoassisted H2O2, solar photo-Fenton at acid and near-neutral pH, and solar heterogeneous photocatalysis using TiO2, with and without H2O2, have been studied for the inactivation of spores of Curvularia sp., a phytopathogenic fungi worldwide found in soils and crops. Different concentrations of reagents and catalysts were evaluated at bench scale (solar vessel reactors, 200mL) and at pilot plant scale (solar Compound Parabolic Collector-CPC reactor, 20L) under natural solar radiation using distilled water (DW) and real secondary effluents (SE) from a municipal wastewater treatment plant. Inactivation order of Curvularia sp. in distilled water was determined, i.e. TiO2/H2O2/sunlight (100/50mgL-1)>H2O2/sunlight (40mgL-1)>TiO2/sunlight (100mgL-1)>photo-Fenton with 5/10mgL-1 of Fe2+/H2O2 at pH3 and near-neutral pH. For the case of SE, at near neutral pH, the most efficient solar process was H2O2/Solar (60mgL-1); nevertheless, the best Curvularia sp. inactivation rate was obtained with photo-Fenton (10/20mgL-1 of Fe2+/H2O2) requiring a previous water adicification to pH3, within 300 and 210min of solar treatment, respectively. These results show the efficiency of solar AOPs as a feasible option for the inactivation of resistant pathogens in water for crops irrigation, even in the presence of organic matter (average Dissolved Organic Carbon (DOC): 24mgL-1), and open a window for future wastewater reclamation and irrigation use.

Enhancing biodegradability of priority substances (pesticides) by solar photo-Fenton.

In this paper, we present the photo-Fenton treatment in a solar pilot-plant scale of several EU priority hazardous substances (Alachlor, Atrazine, Chlorfenvinphos, Diuron and Isoproturon) dissolved in water. The results have been evaluated not only from the point of view of contaminant disappearance and mineralisation, but also of toxicity reduction and enhancement of biodegradability. Degradation was monitored by total organic carbon, pesticide concentration by HPLC-UV, inorganics released by ion chromatography, and biodegradability by the Zahn-Wellens (Z-W) test. The total volume of the solar photoreactor, composed of compound parabolic collectors with a total area of 4.16m2, was between 70 and 82 L. The treatment was shown to be effective, mineralising all of the pesticides tested, both alone and in mixtures. In order to find out the conditions for biocompatibility using the photo-Fenton reaction as a pre-treatment step, wastewater inoculated with unacclimated municipal sludge containing pesticides after certain degradation time was evaluated by the Z-W test. Biodegradability was enhanced (70% considered biodegradable) by the photo-Fenton treatment after 12-25min. It may be concluded that the photo-Fenton treatment consistently enhances biodegradability of wastewater containing pesticides.

Intracellular mechanisms of solar water disinfection.

Solar water disinfection (SODIS) is a zero-cost intervention measure to disinfect drinking water in areas of poor access to improved water sources, used by more than 6 million people in the world. The bactericidal action of solar radiation in water has been widely proven, nevertheless the causes for this remain still unclear. Scientific literature points out that generation of reactive oxygen species (ROS) inside microorganisms promoted by solar light absorption is the main reason. For the first time, this work reports on the experimental measurement of accumulated intracellular ROS in E. coli during solar irradiation. For this experimental achievement, a modified protocol based on the fluorescent probe dichlorodihydrofluorescein diacetate (DCFH-DA), widely used for oxidative stress in eukaryotic cells, has been tested and validated for E. coli. Our results demonstrate that ROS and their accumulated oxidative damages at intracellular level are key in solar water disinfection.