RESUMEN
Chirality has a crucial effect on clinical, chemical and biological research since most bioactive compounds are chiral in the natural world. It is thus important to evaluate the enantiomeric ratio (or the enantiopurity) of the selected chiral analytes. To this purpose, fluorescence and electrochemical sensors, in which a chiral modifier is present, are reported in the literature. In this review, fluorescence and electrochemical sensors for enantiorecognition, in which chiral carbon dots (CDs) are used, are reported. Chiral CDs are a novel zero-dimensional carbon-based nanomaterial with a graphitic or amorphous carbon core and a chiral surface. They are nanoparticles with a high surface-to-volume ratio and good conductivity. Moreover, they have the advantages of good biocompatibility, multi-color emission, good conductivity and easy surface functionalization. Their exploitation in enantioselective sensing is the object of this review, in which several examples of fluorescent and electrochemical sensors, containing chiral CDs, are analyzed and discussed. A brief introduction to the most common synthetic procedures of chiral CDs is also reported, evidencing strengths and weaknesses. Finally, consideration concerning the potential challenges and future opportunities for the application of chiral CDs to the enantioselective sensing world are outlined.
RESUMEN
A simple and selective method for the determination of caffeine (CAF) and theophylline (THEO) has been developed for a glassy carbon electrode (GCE) modified with a composite including carbon dots (CDs) and chitosan (CS). To our knowledge, there are no previous studies that analyze a CDs-modified GCE for the presence of CAF and THEO. The electrochemical behavior of a GCE modified with a CDs-CS composite was studied in acidic medium by cyclic voltammetry (CV) and differential pulse voltammetry (DPV). Considering the sensor analytical parameters, the same linear concentrations range was found for CAF and THEO ranging from 1 × 10-5 to 5 × 10-3 mol L-1 with the same detection limit (LOD) of 1 × 10-6 mol L-1. The reproducibility and repeatability data were satisfactory in terms of RSD%. Moreover, the storage stability was evaluated, evidencing good results whatever the experimental conditions used. The developed sensor was applied for the simultaneous determination of CAF and THEO in tea and drug, and results were compared with those obtained with HPLC-ESI-MS in SIR mode as an independent method optimized on purpose. The electrochemical sensor presents the undoubled advantages in terms of cheapness, portability, and ease of use, since it does not require skilled personnel.
Asunto(s)
Cafeína , Quitosano , Teofilina , Reproducibilidad de los Resultados , Carbono , TéRESUMEN
In order to replace the expensive metal/ligand catalysts and classic toxic and volatile solvents, commonly used for the hydration of alkynes, the hydration reaction of alkynes was studied in the ionic liquid 1-butyl-3-methylimidazolium tetrafluoroborate (BMIm-BF4) adding boron trifluoride diethyl etherate (BF3·Et2O) as catalyst. Different ionic liquids were used, varying the cation or the anion, in order to identify the best one, in terms of both efficiency and reduced costs. The developed method was efficaciously applied to different alkynes, achieving the desired hydration products with good yields. The results obtained using a conventional approach (i.e., adding BF3·Et2O) were compared with those achieved using BF3 electrogenerated in BMIm-BF4, demonstrating the possibility of obtaining the products of alkyne hydration with analogous or improved yields, using less hazardous precursors to generate the reactive species in situ. In particular, for terminal arylalkynes, the electrochemical route proved to be advantageous, yielding preferentially the hydration products vs the aldol condensation products. Importantly, the ability to recycle the ionic liquid in subsequent reactions was successfully demonstrated.
RESUMEN
Agropyron repens (L.) P. Beauv. (couch grass) is a world-wide infesting rhizomatous plant with pharmacological applications. Chemical research is focused on its allelopathic and anti-inflammatory components, which are mainly present in the essential oil. Conversely, the aqueous extracts have been sparingly investigated, although the herbal tea is by far the most used formulation. To fill the gap, the metabolic profile of Agropyron repens rhizome herbal tea was investigated by electrospray ionization (ESI) tandem-mass spectrometry (MS/MS); the phenolic profile was investigated by HPLC-PDA-ESI-MS/MS. ESI-MS fingerprinting was provided, evidencing diagnostic ions for saccharides, organic acids and amino acids. The HPLC-PDA-ESI-MS/MS analysis evidenced at least 20 characteristic phenolic compounds, the most representative being caffeoyl and feruloyl quinic esters, followed by coumaric, caffeic and ferulic acids, and hesperidin among flavonoids. In addition, the essential amino acid tryptophan was identified for the first time. The results suggest new perspectives of applications for Agropyron repens rhizome.
Asunto(s)
Agropyron , Tés de Hierbas , Cromatografía Líquida de Alta Presión/métodos , Flavonoides/química , Metaboloma , Fenoles/análisis , Extractos Vegetales/química , Rizoma/química , Espectrometría de Masa por Ionización de Electrospray/métodos , Espectrometría de Masas en Tándem/métodos , Tés de Hierbas/análisisRESUMEN
Chirality is undoubtedly a fundamental property of nature since the different interactions of optically active molecules in a chiral environment are essential for numerous applications. Thus, in the field of asymmetric synthesis, the search for efficient, sustainable, cost-effective and recyclable chiral catalysts is still the main challenge in organic chemistry. The field of carbon dots (CDs) has experienced tremendous development in the last 15 years, including their applications as achiral catalysts. Thus, understanding the implications of chirality in CDs chemistry could be of utmost importance to achieving sustainable and biocompatible chiral nanocatalysts. An efficient and cost-effective electrochemical synthetic methodology for the synthesis of L-Proline-based chiral carbon dots (CCDs) and EtOH-derived L-Proline-based chiral carbon dots (CCDs) is herein reported. The electrochemical set-up and reaction conditions have been thoroughly optimised and their effects on CCDs size, photoluminescence, as well as catalytic activity have been investigated. The obtained CCDs have been successfully employed to catalyze an asymmetric aldol reaction, showing excellent results in terms of yield, diastereo- and enantioselectivity. Moreover, the sustainable nature of the CCDs was demonstrated by recycling the catalysts for up to 3 cycles without any loss of reactivity or stereoselectivity.
Asunto(s)
Carbono , Prolina , Aldehídos/química , Catálisis , Prolina/químicaRESUMEN
In this paper we present the first electrochemical generation of NHC carried out in a divided flow cell. The flow cell operated in the recycle mode. The need for a divided cell derived from the anodic electroactivity of the electrogenerated carbene. In order to have NHC accumulation in the catholyte, the Nafion membrane (cell separator) was pretreated with an alkaline solution. The formation of NHC was quantified as its reaction product with elemental sulfur. The NHC was successfully used as organocatalyst in two classical umpolung reactions of cinnamaldehyde: its cyclodimerization and its oxidative esterification.
RESUMEN
In the last twenty years, N-heterocyclic carbenes (NHCs) have been extensively studied for their application as organocatalysts in stereoselective synthesis as well as ligands for transition metals-promoted synthetic methodologies. Derived mainly from azolium salts, NHCs have demonstrated exceptional versatility in their generation usually performed by deprotonation or reduction (chemical or electrochemical). In particular, the generation of NHC under electrochemical conditions, starting from azolium-based ionic liquids, has proven to be a successful green approach and demonstrated wide applicability in organic synthesis. In this Personal Account, the application of electrogenerated NHCs in organic synthesis will be discussed, with a particular attention to the different reactivity in ionic liquids compared to classical organic solvents.
RESUMEN
The anodic oxidation of 1-butyl-3-methylimidazolium tetrafluoroborate (BMIm-BF4) efficiently generates BF3 from BF4-. This Lewis acid, strongly bound to the ionic liquids, can be efficiently used in classical BF3-catalyzed reactions. We demonstrated the BF3/BMIm-BF4 reactivity in four reactions, namely, a domino Friedel-Crafts/lactonization of phenols, the Povarov reaction, the Friedel-Crafts benzylation of anisole, and the multicomponent synthesis of tetrahydro-11H-benzo[a]xanthen-11-ones. In comparison with literature data using BF3-Et2O in organic solvents, in all the presented cases, analogous or improved results were obtained. Moreover, the noteworthy advantages of the developed method are the in situ generation of BF3 (no storing necessity) in the required amount, using only the electron as redox reagent, and the recycling of BMIm-BF4 for multiple subsequent runs.
Asunto(s)
Líquidos Iónicos , Oxidación-Reducción , SolventesRESUMEN
Candida albicans, in specific conditions, is responsible of severe invasive systemic candidiasis that are related to its ability to produce biofilm on biological and artificial surfaces. Many studies reported the role of iron in fungal growth and virulence and the ability of metal chelating agents to interfere with C. albicans metabolism, virulence and biofilm formation. Here we report the activity of 3-hydroxy-1,2-dimethyl-4(1H)-pyridinone (deferiprone) derivatives against C. albicans planktonic cells and biofilm. Some of the studied compounds (2b and 3b) were able to chelate Fe(III) and Cu(II), and showed an interesting activity on planktonic cells (MIC50 of 32 µg/mL and 16 µg/mL respectively) and on biofilm formation (BMIC50 of 32 µg/mL and 16 µg/mL respectively) in cultured ATCC 10,231C. albicans; this activity was reduced, in a concentration dependent way, by the addition of Fe(III) and Cu(II) to the culture media. Furthermore, the most active compound 3b showed a low toxicity on Galleria mellonella larvae.
Asunto(s)
Antifúngicos/farmacología , Candida albicans/efectos de los fármacos , Quelantes/farmacología , Cobre/farmacología , Deferiprona/farmacología , Hierro/farmacología , Antifúngicos/síntesis química , Antifúngicos/química , Quelantes/síntesis química , Quelantes/química , Cobre/química , Deferiprona/química , Relación Dosis-Respuesta a Droga , Diseño de Fármacos , Hierro/química , Pruebas de Sensibilidad Microbiana , Estructura Molecular , Relación Estructura-ActividadRESUMEN
The cathodic reduction of acetonitrile solutions containing a tetraalkylammonium salt leads to the formation of the cyanomethyl anion (-CH2CN, cyanomethanide). This electrolysis can be carried out under very simple experimental conditions (constant-current electrolyses), using various cathodic materials, controlling the amount of base by simply controlling the amount of charge. Despite the fact that the mechanism for this electrochemical reaction is still debated (and it depends on the cathodic material), the outcome of the electrolysis is the formation of a strong base, -CH2CN (pKa 31.3 for acetonitrile in DMSO). The chemical behavior of this electrogenerated base (EGB) strongly depends on its counterion, which in this case is a tetraalkylammonium cation, with a low charge density and thus not coordinated. The very weak interaction between R4N+ and -CH2CN renders the cyanomethyl anion a "naked" ion, and thus highly reactive. In particular, the cyanomethyl anion can react as a base and as a nucleophile. In the first case, it behaves as a strong base and, after deprotonation of a weak acidic substrate, transforms itself into a solvent molecule, acetonitrile, thus generating no byproducts. In the second case, the reactivity as a nucleophile of the cyanomethyl anion obviously depends on the reaction partner. When an electrophile is present in the reaction mixture, a cyanomethylation is obtained (e.g., with aromatic aldehydes, possessing no acidic hydrogen atoms, which undergo nucleophilic attack on the carbonyl carbon atom by -CH2CN); on the contrary, when no reagent is present other than acetonitrile and tetraalkylammonium salt, an attack on the parent molecule leads to the acetonitrile dimer, 3-aminocrotononitrile, which in turn can behave as a base and/or as a nucleophile. In this regard, some authors report that it is preferable to carry out the electrogeneration of the cyanomethyl anion under different experimental conditions, i.e., using an undivided cell and a sacrificial magnesium anode. In this way, a Grignard-type reagent is formed (Mg(CH2CN)2) which highly stabilizes the cyanomethyl anion, preventing its dimerization. It should be noted that in our laboratory the electrogenerated tetraalkylammonium cyanomethanide was extensively used in various reactions (both acid-base and nucleophile-electrophile, vide infra), and in almost no case, the amount of acetonitrile dimer formed exceeded 5%, confirming the validity of this electrochemical methodology to generate a very efficient base. Moreover, when in the reaction mixture both a weak acid and an electrophile are present, the prevalent reactivity of the cyanomethyl anion is as a base, leaving the possibility of a cyanomethylation reaction to those cases in which no acidic substrate is present. We have successfully used the electrogenerated cyanomethyl anion in many base-induced reactions, as the synthesis of the ß-lactam ring (chiral or not), the insertion of carbon dioxide into amines and amino alcohols, the activation of elemental sulfur and insertion into carbonyl compounds, the selective alkylation of difunctional compounds, etc.
RESUMEN
The present work aimed to synthesise promising antioxidant compounds as a valuable alternative to the currently expensive and easily degradable molecules that are employed as stabilizers in industrial preparation. Taking into account our experience concerning domino Friedel-Crafts/lactonization reactions, we successfully improved and extended the previously reported methodology toward the synthesis of 3,3-disubstituted-3H-benzofuran-2-one derivatives 9-20 starting from polyphenols 1-6 as substrates and either diethylketomalonate (7) or 3,3,3-trifluoromethyl pyruvate (8) as electrophilic counterpart. The antioxidant capacity of the most stable compounds (9-11 and 15-20) was evaluated by both DPPH assay and Cyclic Voltammetry analyses performed in alcoholic media (methanol) as well as in aprotic solvent (acetonitrile). By comparing the recorded experimental data, a remarkable activity can be attributed to few of the tested lactones.
Asunto(s)
Antioxidantes/farmacología , Benzofuranos/síntesis química , Benzofuranos/farmacología , Compuestos de Bifenilo/química , Electroquímica/métodos , Picratos/química , Acetonitrilos/química , Alquilación , Antioxidantes/química , Cinética , Metanol/química , Oxidación-Reducción , Fenoles/química , Fenoles/farmacología , Análisis de Regresión , SolventesRESUMEN
The electrochemical reduction of 2-(2,2-dibromovinyl)naphthalene in a DMF solution (Pt cathode) yields selectively 2-ethynylnaphthalene or 2-(bromoethynyl)naphthalene in high yields, depending on the electrolysis conditions. In particular, by simply changing the working potential and the supporting electrolyte, the reaction can be directed towards the synthesis of the terminal alkyne (Et4NBF4) or the bromoalkyne (NaClO4). This study allowed to establish that 2-(bromoethynyl)naphthalene can be converted into 2-ethynylnaphthalene by cathodic reduction.
RESUMEN
A series of N,N-dimethylcarbamates containing a N,N-dibenzylamino moiety was synthesized and tested to evaluate their ability to inhibit Acetylcholinesterase (AChE). The most active compounds 4 and 8, showed 85 and 69% of inhibition at 50 µM, respectively. Furthermore, some basic SAR rules were outlined: an alkyl linker of six methylene units is the best spacer between the carbamoyl and dibenzylamino moieties; electron-withdrawal substituents on aromatics rings of the dibenzylamino group reduce the inhibitory power. Compound 4 produces a slow onset inhibition of AChE and this is not due to the carbamoylation of the enzyme, as demonstrated by the time-dependent inhibition assay of AChE with compound 4 and by MALDI-TOF MS analysis of trypsinized AChE inhibited by compound 4. Instead, compound 4 could act as a slow-binding inhibitor of AChE, probably because of its high conformational freedom due to the linear alkyl chain.
Asunto(s)
Acetilcolinesterasa/metabolismo , Carbamatos/farmacología , Inhibidores de la Colinesterasa/farmacología , Diseño de Fármacos , Carbamatos/síntesis química , Carbamatos/química , Inhibidores de la Colinesterasa/síntesis química , Inhibidores de la Colinesterasa/química , Relación Dosis-Respuesta a Droga , Humanos , Espectrometría de Masas , Estructura Molecular , Relación Estructura-ActividadRESUMEN
Dry reforming of methane (DRM) is considered one of the most promising technologies for efficient greenhouse gas management thanks to the fact that through this reaction, it is possible to reduce CO2 and CH4 to obtain syngas, a mixture of H2 and CO, with a suitable ratio for the Fischer-Tropsch production of long-chain hydrocarbons. Two other main processes can yield H2 from CH4, i.e., Steam Reforming of Methane (SRM) and Partial Oxidation of Methane (POM), even though, not having CO2 as a reagent, they are considered less green. Recently, scientists' challenge is to overcome the many drawbacks of DRM reactions, i.e., the use of precious metal-based catalysts, the high temperatures of the process, metal particle sintering and carbon deposition on the catalysts' surfaces. To overcome these issues, one proposed solution is to implement photo-thermal dry reforming of methane in which irradiation with light is used in combination with heating to improve the efficiency of the process. In this paper, we review the work of several groups aiming to investigate the pivotal promoting role of light radiation in DRM. Focus is also placed on the catalysts' design and the progress needed for bringing DRM to an industrial scale.
RESUMEN
Pharmacophoric mapping is a useful procedure to frame, especially when crystallographic receptor structures are unavailable as in ligand-based studies, the hypothetical site of interaction. In this study, 71 pyrrole derivatives active against M. tuberculosis were used to derive through a recent new 3-D QSAR protocol, 3-D QSAutogrid/R, several predictive 3-D QSAR models on compounds aligned by a previously reported pharmacophoric application. A final multiprobe (MP) 3-D QSAR model was then obtained configuring itself as a tool to derive pharmacophoric quantitative models. To stress the applicability of the described models, an external test set of unrelated and newly synthesized series of R-4-amino-3-isoxazolidinone derivatives found to be active at micromolar level against M. tuberculosis was used, and the predicted bioactivities were in good agreement with the experimental values. The 3-D QSAutogrid/R procedure proved to be able to correlate by a single multi-informative scenario the different activity molecular profiles thus confirming its usefulness in the rational drug design approach.
Asunto(s)
Antituberculosos/química , Antituberculosos/farmacología , Mycobacterium tuberculosis/efectos de los fármacos , Pirroles/química , Pirroles/farmacología , Relación Estructura-Actividad Cuantitativa , Diseño de Fármacos , Humanos , Modelos Moleculares , Oxazolidinonas/química , Oxazolidinonas/farmacología , Tuberculosis/tratamiento farmacológicoRESUMEN
Carbon quantum dots (CDs) are "small" carbon nanostructures with excellent photoluminescence properties, together with low-toxicity, high biocompatibility, excellent dispersibility in water as well as organic solvents. Due to their characteristics, CDs have been studied for a plethora of applications as biosensors, luminescent probes for photodynamic and photothermal therapy, fluorescent inks and many more. Moreover, the possibility to obtain carbon dots from biomasses and/or organic waste has strongly promoted the interest in this class of carbon-based nanoparticles, having a promising impact in the view of circular economy and sustainable processes. Within this context, electrochemistry proved to be a green, practical, and efficient method for the synthesis of high-quality CDs, with the possibility to fine-tune their characteristics by changing operational parameters. This review outlines the principal and most recent advances in the electrochemical synthesis of CDs, focusing on the electrochemical set-up optimization.
RESUMEN
BACKGROUND: Brewer's spent grain (BSG) is one of the main by-products of beer industry, little used because of its high moisture making it difficult to transport and store. Mainly used as animal feed and for energy production, the agro-industrial waste have recently attracted attention as source of bioactive compounds, with potential applications in many sectors as food, nutraceutical, pharmaceutical, cosmetic, food packaging. The present work focuses on BSG as potential source of valuable small-size bioactive compounds. METHODS: Laboratory-made BSG was obtained by using four base malts for mashing. After drying, BSG was eco-friendly extracted with water and the extracts analyzed by untargeted ElectroSpray Ionization (ESI)-Mass Spectrometry (MS)/Mass Spectrometry (MS) (ESI-MS/MS) infusion experiments and by targeted High Performance Liquid Chromatography-PhotoDiodeArray-ElectroSpray Ionization-Mass Spectrometry (HPLC-PDA-ESI-MS) in Selected Ion Recording (SIR) mode analysis, to investigate the metabolic profile, the phenolic profile, the individual phenolic content, and tryptophan content. Aqueous extracts of malts and wort samples were also analyzed for a comparison. Data were statistically analyzed by ANOVA test. An explorative analysis based on Principal Component Analysis (PCA) was also carried out on malts, wort and threshes, in order to study correlation among samples and between samples and variables. RESULTS: The untargeted ESI-MS/MS infusion experiments provided the mass spectral fingerprint of BSG, evidencing amino acids (γ-aminobutyric acid, proline, valine, threonine, leucine/isoleucine, lysine, histidine, phenylalanine and arginine) and organic and inorganic acids (pyruvic, lactic, phosphoric, valerianic, malonic, 2-furoic, malic, citric and gluconic acids), besides sugars. γ-Aminobutyric acid and lactic acid resulted predominant among the others. The targeted HPLC-PDA-ESI-MS in SIR mode analysis provided the phenolic profile of the polar fraction of BSG, evidenced tryptophan as the main residual metabolite in BSG (62.33-75.35 µg/g dry BSG), and catechin (1.13-4.24 µg/g dry BSG) as the representative phenolic antioxidant of not pre-treated BSG samples. The chemometric analysis of the individual compounds content in BSG, malt and wort evidenced similarities and differences among the samples. CONCLUSIONS: As main goal, the phytochemical characterization of BSG from base malts highlighted BSG as a potential source of small biomolecules, as tryptophan and catechin, besides γ-aminobutyric acid and lactic acid, opening to new perspectives of application for BSG. Strategies for their recovery are a future challenge. Moreover, ESI-MS/MS analysis was confirmed as a powerful tool for fast characterization of complex matrix. Last, results obtained by chemometric elaboration of data demonstrated the possibility to monitor a small number of molecules to ensure the quality of a final product.
Asunto(s)
Catequina , Espectrometría de Masas en Tándem , Animales , Triptófano , Cromatografía Liquida , Espectrometría de Masa por Ionización de ElectrosprayRESUMEN
Imidazolium-based dicationic ionic liquids (DILs) are gaining considerable space in the field of organocatalysis mainly due to the opportunities in offering new possible applicable structural variations. In addition to the well-known variables which made the ionic liquids (ILs) famous as the type of cation and anion used, the nature of the molecular spacer moiety turns out a further possibility to improve some physicochemical properties, for example, solubility, acidity, electrochemical behavior, and so on. For this reason, this class of ionic liquids has been considered as possible competitors to their corresponding monocationic salts in replacing common catalysts in organic synthesis, particularly in cases in which their bidentate nature could positively affect the catalytic activity. This mini-review is intended to highlight the progress carried out in the last six years in the field of organocatalysis, including DILs as such and as hybrids with polymers, nanomaterials, and composites.
RESUMEN
In order to obtain multi-functional molecules for Alzheimer's disease, a series of deferiprone derivatives has been synthesized and evaluated in vitro with the hypothesis that they can restore the cholinergic tone and attenuate the dyshomeostasis of the metals mainly involved in the pathology. These compounds were designed as dual binding site AChE inhibitors: they possess an arylalkylamine moiety connected via an alkyl chain to a 3-hydroxy-4-pyridone fragment, to allow the simultaneous interaction with catalytic active site (CAS) and peripheral anionic site (PAS) of the enzyme. Deferiprone moiety and 2-aminopyridine, 2-aminopyrimidine or 2,4-diaminopyrimidine groups have been incorporated into these compounds, in order to obtain molecules potentially able to chelate bio-metals colocalized in Aß plaques and involved in the generation of radical species. Synthesized compounds were tested by enzymatic inhibition studies towards EeAChE and eqBChE using Ellman's method. The most potent EeAChE inhibitor is compound 5a, with a Ki of 788 ± 51 nM, while the most potent eqBChE inhibitors are compounds 12 and 19, with Ki values of 182 ± 18 nM and 258 ± 25 nM respectively. Selected compounds, among the most potent cholinesterases inhibitors, were able to form complex with iron and in some cases with copper and zinc. Moreover, these compounds were characterized by low toxicity on U-87 MG Cell Line from human brain (glioblastoma astrocytoma).
Asunto(s)
Acetilcolinesterasa/metabolismo , Enfermedad de Alzheimer/tratamiento farmacológico , Inhibidores de la Colinesterasa/síntesis química , Deferiprona/síntesis química , Quelantes del Hierro/síntesis química , Aminas/química , Secuencia de Aminoácidos , Aminopiridinas/química , Dominio Catalítico , Inhibidores de la Colinesterasa/farmacología , Complejos de Coordinación/química , Deferiprona/farmacología , Diseño de Fármacos , Humanos , Quelantes del Hierro/farmacología , Simulación del Acoplamiento Molecular , Pirimidinas/química , Relación Estructura-ActividadRESUMEN
Ionic liquids (ILs) are considered in the majority of cases green solvents, due to their virtually null vapor pressure and to the easiness in recycling them. In particular, imidazolium ILs are widely used in many fields of Chemistry, as solvents or precursors of N-heterocyclic carbenes (NHCs). The latter are easily obtained by deprotonation of the C2-H, usually using strong bases or cathodic reduction. Nevertheless, it is known that weaker bases (e.g., triethylamine) are able to promote C2-H/D exchange. From this perspective, the possibility of deprotonating C2-H group of an imidazolium cation by means of a basic counter-ion was seriously considered and led to the synthesis of imidazolium ILs spontaneously containing NHCs. The most famous of this class of ILs are N,N'-disubstituted imidazolium acetates. Due to the particular reactivity of this kind of ILs, they were appointed as "organocatalytic ionic liquids" or "proto-carbenes." Many papers report the use of these imidazolium acetates in organocatalytic reactions (i. e., catalyzed by NHC) or in stoichiometric NHC reactions (e.g., with elemental sulfur to yield the corresponding imidazole-2-thiones). Nevertheless, the actual presence of NHC in N,N'-disubstituted imidazolium acetate is still controversial. Moreover, theoretical studies seem to rule out the presence of NHC in such a polar environment as an IL. Aim of this Mini Review is to give the reader an up-to-date overview on the actual or potential presence of NHC in such an "organocatalytic ionic liquid," both from the experimental and theoretical point of view, without the intent to be exhaustive on N,N'-disubstituted imidazolium acetate applications.