RESUMEN
In oenology, there is a growing demand by consumers for wines produced with less inputs (such as sulphite, frequently used for microbial control). Emerging control methods for managing microorganisms in wine are widely studied. In this study, the efficiency of pulsed light (PL) treatment was investigated. A drop-platted system was used to evaluate the impact of three PL operational parameters: the fluence per flash, the total fluence and the flash frequency. Fluence per flash appeared to be a key parameter prior to total fluence, thus demonstrating the importance of the effect of peak voltage during PL treatments. The efficiency of PL treatment was assessed on 198 strains distributed amongst fourteen yeast species related to wine environment, and an important variability in PL response was observed. Brettanomyces bruxellensis strains were strongly sensitive to PL, with intraspecific variation. PL was then applied to red wines inoculated with 9 strains of B. bruxellensis, Saccharomyces cerevisiae and Lachancea thermotolerans. Results confirmed interspecific response variability and a higher sensitivity of B. bruxellensis species to PL. Wine treatments with a total fluence of 22.8 J cm-2 resulted in more than 6 log reduction for different B. bruxellensis strains. These results highlight the potential of PL for wine microbial stabilization.
Asunto(s)
Brettanomyces , Vino , Vino/análisis , Microbiología de Alimentos , Saccharomyces cerevisiae , Sulfitos/farmacologíaRESUMEN
This review provides the current laboratory criteria for the detection and evaluation of the possible causes of alteration of non-concentrated industrial derivatives of tomatoes (peeled tomatoes, pulps, purees, sauces, and fillets), packaged in coated or uncoated tinplate cans. We discuss how the product alterations are typically the consequence of technological errors either in the can production, or in the storage process, or in the product sterilization. The described procedures include the quantitative determination of the distribution of gases (H2 , CO2 , N2 , and O2 ) present in the headspace of the container. The gas composition and ratios can be used as markers to allow easy diagnosis of the causes of microbiologic and/or physical-chemical alterations of the tomatoes, which are usually made evident by swelling of the containers. These tests should be integrated by microbiological analyses aimed at a restricted group of microorganisms, with the chemical analysis of the container and the chemical analysis of the altered product. By way of example, we report the assessment of the causes of alteration in four different case-studies.
Asunto(s)
Solanum lycopersicum , Conservación de Alimentos/métodos , Embalaje de Alimentos , Contaminación de Alimentos/análisis , AlimentosRESUMEN
The objective of this study was to evaluate the potential of green solvents for extractions of bioactive compounds (BACs) and essential oils from wild thyme (Thymus serpyllum L.) using theoretical and experimental procedures. Theoretical prediction was assessed by Hansen solubility parameters (HSPs) and conductor-like screening model for realistic solvents (COSMO-RS), to predict the most suitable solvents for extraction of BACs. An experimental procedure was performed by nonthermal technology high voltage electrical discharge (HVED) and it was compared with modified conventional extraction (CE). Obtained extracts were analyzed for chemical and physical changes during the treatment. Theoretical results for solution of BACs in ethanol and water, as green solvents, were confirmed by experimental results, while more accurate data was given by COSMO-RS assessment than HSPs. Results confirmed high potential of HVED for extraction of BACs and volatile compounds from wild thyme, in average, 2.03 times higher yield of extraction in terms of total phenolic content was found compared to CE. The main phenolic compound found in wild thyme extracts was rosmarinic acid, while the predominant volatile compound was carvacrol. Obtained extracts are considered safe and high-quality source reach in BACs that could be further used in functional food production.
Asunto(s)
Fraccionamiento Químico/métodos , Conductividad Eléctrica , Fenoles/química , Fenoles/aislamiento & purificación , Thymus (Planta)/química , Compuestos Orgánicos Volátiles/química , Compuestos Orgánicos Volátiles/aislamiento & purificación , Cromatografía Líquida de Alta Presión , Electricidad , Cromatografía de Gases y Espectrometría de Masas , Tecnología Química Verde , Fenoles/farmacología , Extractos Vegetales/química , Extractos Vegetales/aislamiento & purificación , Extractos Vegetales/farmacología , Solubilidad , Espectrometría de Masas en Tándem , Compuestos Orgánicos Volátiles/farmacologíaRESUMEN
"Neapolitan limmo" is an ancient and rare sweet Mediterranean lime, now almost extinct but used until a few decades ago for the production of a fragrant liqueur called the "four citrus fruits". The objective of this work was to compare, through the use of chemical (flavonoids, volatile organic compounds, and chiral compounds) and molecular (DNA fingerprint based on RAPD-PCR) markers, the residual population of Neapolitan limmo with other populations of sweet limes, identified in Calabria and known as "lemoncetta Locrese". We report for the first time specific botanical characteristics of the two fruits and unequivocally show that the ancient sweet Mediterranean limes Neapolitan limmo and lemoncetta Locrese are synonyms of the same Citrus species. Owing to the biodiversity conserved in their places of origin, it will now be possible to recover, enhance and implement the use of this ancient sweet lime for agro-industrial purposes.
Asunto(s)
Citrus aurantiifolia/genética , Frutas/genética , Técnica del ADN Polimorfo Amplificado Aleatorio , ItaliaRESUMEN
BACKGROUND: The extent of enzymatic proteolysis mainly depends on accessibility of the peptide bonds, which stabilize the protein structure. The high hydrostatic pressure (HHP) process is able to induce, at certain operating conditions, protein displacement, thus suggesting that this technology can be used to modify protein resistance to the enzymatic attack. This work aims at investigating the mechanism of enzymatic hydrolysis assisted by HHP performed under different processing conditions (pressure level, treatment time). Bovine serum albumin was selected for the experiments, solubilized in sodium phosphate buffer (25 mg mL-1 , pH 7.5) with α-chymotrypsin or trypsin (E/S ratio = 1/10) and HPP treatment (100-500 MPa, 15-25 min). RESULTS: HHP treatment enhanced the extent of the hydrolysis reaction of globular proteins, being more effective than conventional hydrolysis. At HHP treatment conditions maximizing the protein unfolding, the hydrolysis degree of proteins was increased as a consequence of the increased exposure of peptide bonds to the attack of proteolytic enzymes. The maximum hydrolysis degree (10% and 7% respectively for the samples hydrolyzed with α-chymotrypsin and trypsin) was observed for the samples processed at 400 MPa for 25 min. At pressure levels higher than 400 MPa the formation of aggregates was likely to occur; thus the degree of hydrolysis decreased. CONCLUSION: Protein unfolding represents the key factor controlling the efficiency of HHP-assisted hydrolysis treatments. The peptide produced under high pressure showed lower dimensions and a different structure with respect to those of the hydrolysates obtained when the hydrolysis was carried out at atmospheric pressure, thus opening new frontiers of application in food science and nutrition. © 2016 Society of Chemical Industry.
Asunto(s)
Quimotripsina/química , Albúmina Sérica Bovina/química , Tripsina/química , Biocatálisis , Hidrólisis , Presión HidrostáticaRESUMEN
The influence of Pulsed Electric Field (PEF) pre-treatment of blueberry fruits (Vaccinium myrtillus L.), both on the extraction yield and antioxidant properties of juice obtained by pressing and on the on the recovery of bioactive compounds from berry by-products (press cake) by extraction with solvent, was investigated. PEF treatments carried out at field strengths of 1, 3, and 5 kV/cm and an energy input of 10 kJ/kg achieved a cell disintegration index (Z p ) of 0.70, 0.80, and 0.87, respectively. Mechanical pressing (1.32 bar for 8 min) of PEF-treated berries (1, 3, and 5 kV/cm at 10 kJ/kg) significantly increased the juice yield (+28 %) compared with the untreated sample. The juice obtained from PEF pre-treated berries also had a significantly higher total phenolic content (+43 %), total anthocyanin content (+60 %) and antioxidant activity (+31 %). However, PEF treatment intensity higher than 1 kV/cm did not significantly improve the quantitative or qualitative characteristics of the juice. Compared to the untreated sample, higher amounts of total phenolics (+63 %), total athocyanins (+78 %) and antioxidant activity (+65 %) were detected in the press cake extracts. PEF treatment of higher intensity resulted in better extractability of bioactive compounds from blueberry press cake. The results obtained from this study demonstrate the potential of PEF as a mild pre-treatment method to improve the efficiency of the industrial processing of berry fruits.
RESUMEN
Natural hydrogels based on renewable and inexpensive sources, such as starch, represent an interesting group of biopolymeric materials with a growing range of applications in the biomedical, cosmeceutical, and food sectors. Starch-based hydrogels have traditionally been produced using different processes based on chemical or physical methods. However, the long processing times, high energy consumption, and safety issues related to the synthesis of these materials, mostly causing severe environmental damage, have been identified as the main limitations for their further exploitation. Therefore, the main scientific challenge for research groups is the development of reliable and sustainable processing methods to reduce the environmental footprint, as well as investigating new low-cost sources of starches and individuating appropriate formulations to produce stable hydrogel-based products. In the last decade, the possibility of physically modifying natural polysaccharides, such as starches, using green or sustainable processing methods has mostly been based on nonthermal technologies including high-pressure processing (HPP). It has been demonstrated that the latter exerts an important role in improving the physicochemical and techno-functional properties of starches. However, as for surveys in the literature, research activities have been devoted to understanding the effects of physical pre-treatments via high-pressure processing (HPP) on starch structural modifications, more so than elucidating its role and capacity for the rapid formation of stable and highly structured starch-based hydrogels with promising functionality and stability, utilizing more sustainable and eco-friendly processing conditions. Therefore, the present review addresses the recent advancements in knowledge on the production of sustainable starch-based hydrogels utilizing HPP as an innovative and clean-label preparation method. Additionally, this manuscript has the ambition to give an updated overview of starch-based hydrogels considering the different types of structures available, and the recent applications are proposed as well to critically analyze the main perspectives and technological challenges for the future exploitation of these novel structures.
RESUMEN
Tenebrio molitor (TM) larvae, due to their high nutritional value, are gaining growing attention in food and feed sectors. Although few studies dealt with wheat-based products functionalized with TM larvae powder, there is a lack of comprehensive characterization of the raw materials to optimize the formulations for end-product recommendation. This study aimed at investigating the effects of partial replacement of durum wheat semolina with increasing amounts of TM larvae powder (5-30%) on the techno-functional properties of the binary blends. Color, granulometry, hydration properties, pasting characteristics, spectral characteristics (FTIR), reducing sugar content, and bioactivity in terms of total phenolic content (TPC) and antioxidant activity (FRAP, DPPH, ABTS) were assessed in the resulting blends. The increasing insect powder decreased the lightness (L*) and yellowness (b*) but increased the redness (a*) of the samples. In turn, the addition of insect powder did not negatively alter the hydration properties, which were comparable to those detected for semolina. Higher amounts of insect powder led to increased protein and lipid contents, as corroborated by the FTIR spectra, and decreased pasting parameters, with stronger starch granule stability detected when 20% and 30% of insect powder were added to the formulation. Significant increases in TPC and antioxidant activity were observed with increasing amount of insect powder (up to 87%, 78%, 2-fold, 67%, for TPC, FRAP, DPPH, and ABTS, respectively, compared to semolina). Therefore, these promising results have highlighted the possibility of using TM larvae powder as an unconventional ingredient for wheat-based products, by enhancing the nutritional and health-promoting values.
RESUMEN
This study primarily aimed to enhance the extraction of cutin from industrial tomato peel residues. Initially, the conventional extraction process was optimized using response surface methodology (RSM). Subsequently, high-pressure homogenization (HPH) was introduced to improve extraction efficiency and sustainability. The optimization process focused on determining the optimal conditions for conventional extraction via chemical hydrolysis, including temperature (100-130 °C), time (15-120 min), and NaOH concentration (1-3%). The optimized conditions, determined as 130 °C, 120 min, and 3% NaOH solution, yielded a maximum cutin extraction of 32.5%. Furthermore, the results indicated that applying HPH pre-treatment to tomato peels before alkaline hydrolysis significantly increased the cutin extraction yield, reaching 46.1%. This represents an approximately 42% increase compared to the conventional process. Importantly, HPH pre-treatment enabled cutin extraction under milder conditions using a 2% NaOH solution, reducing NaOH usage by 33%, while still achieving a substantial cutin yield of 45.6%. FT-IR analysis confirmed that cutin obtained via both conventional and HPH-assisted extraction exhibited similar chemical structures, indicating that the main chemical groups and structure of cutin remained unaltered by HPH treatment. Furthermore, cutin extracts from both conventional and HPH-assisted extraction demonstrated thermal stability up to approximately 200 °C, with less than 5% weight loss according to TGA analysis. These findings underscore the potential of HPH technology to significantly enhance cutin extraction yield from tomato peel residues while utilizing milder chemical hydrolysis conditions, thereby promoting a more sustainable and efficient cutin extraction process.
RESUMEN
In this study, a two-stage cascade extraction process utilizing pulsed electric fields (PEF) (3 kV/cm, 10 kJ/kg) for initial extraction, followed by ultrasound (US) (200 W, 20 min)-assisted extraction (UAE) in a 50% (v/v) ethanol-water mixture (T = 50 °C, t = 60 min), was designed for the efficient release of valuable intracellular compounds from industrial cherry pomace. The extracted compounds were evaluated for total phenolic content (TPC), flavonoid content (FC), total anthocyanin content (TAC), and antioxidant activity (FRAP), and were compared with conventional solid-liquid extraction (SLE). Results showed that the highest release of bioactive compounds occurred in the first stage, which was attributed to the impact of PEF pre-treatment, resulting in significant increases in TPC (79%), FC (79%), TAC (83%), and FRAP values (80%) of the total content observed in the post-cascade PEF-UAE process. The integration of UAE into the cascade process further augmented the extraction efficiency, yielding 21%, 49%, 56%, and 26% increases for TPC, FC, TAC, and FRAP, respectively, as compared to extracts obtained through a second-stage conventional SLE. HPLC analysis identified neochlorogenic acid, 4-p-coumaroylquinic, and cyanidin-3-O-rutinoside as the predominant phenolic compounds in both untreated and cascade-treated cherry pomace extracts, and no degradation of the specific compounds occurred upon PEF and US application. SEM analysis revealed microstructural changes in cherry pomace induced by PEF and UAE treatments, enhancing the porosity and facilitating the extraction process. The study suggests the efficiency of the proposed cascade PEF-UAE extraction approach for phenolic compounds from industrial cherry pomace with potential applications to other plant-based biomasses.
RESUMEN
Background: The application of Pulsed electric fields as a mild and easily scalable electrotechnology represents an effective approach to selectively intensify the extractability of bioactive compounds from grape pomace, one of the most abundant residues generated during the winemaking process. Objective: This study addressed the optimization of the pulsed electric fields (PEF)-assisted extraction to enhance the extraction yields of bioactive compounds from red grape pomace using response surface methodology (RSM). Methods: The cell disintegration index (Z p ) was identified as response variable to determine the optimal PEF processing conditions in terms of field strength (E = 0.5-5 kV/cm) and energy input (WT = 1-20 kJ/kg). For the solid-liquid extraction (SLE) process the effects of temperature (20-50°C), time (30-300min), and solvent concentration (0-50% ethanol in water) on total phenolic content (TPC), flavonoid content (FC), total anthocyanin content (TAC), tannin content (TC), and antioxidant activity (FRAP) of the extracts from untreated and PEF-treated plant tissues were assessed. The phenolic composition of the obtained extracts was determined via HPLC-PDA. Results: Results demonstrated that the application of PEF at the optimal processing conditions (E = 4.6 kV/cm, WT = 20 kJ/kg) significantly enhanced the permeabilization degree of cell membrane of grape pomace tissues, thus intensifying the subsequent extractability of TPC (15%), FC (60%), TAC (23%), TC (42%), and FRAP values (31%) concerning the control extraction. HPLC-PDA analyses showed that, regardless of the application of PEF, the most abundant phenolic compounds were epicatechin, p-coumaric acid, and peonidin 3-O-glucoside, and no degradation of the specific compounds occurred upon PEF application. Conclusion: The optimization of the PEF-assisted extraction process allowed to significantly enhance the extraction yields of high-value-added compounds from red grape pomace, supporting further investigations of this process at a larger scale.
RESUMEN
The principles of industrial ecology have emerged as pivotal drivers of eco-innovation, aiming to realize a "zero-waste" society where waste materials are repurposed as valuable resources. In this context, High-Pressure Homogenization (HPH) presents a promising, easily scalable micronization technology, capable of enhancing the extractability and bioaccessibility of bioactive compounds found in tomato processing by-products, which are notably abundant waste streams in the Mediterranean region. This study focuses on optimizing HPH treatment parameters to intensify the recovery of bioactive compounds from tomato pomace. Additionally, it investigates the multifaceted impacts of HPH on various aspects, including color, particle size distribution, microscopic characteristics, surface properties, bioactivity, and lycopene bioaccessibility through in vitro digestion simulations. The results demonstrate that the application of HPH under optimized conditions (80 MPa, 25 °C, 10 passes) induces a remarkable 8-fold reduction in mean particle size, reduced surface tension, improved physical stability, uniform color, increased total phenolic content (+31%), antioxidant activity (+30%), dietary fiber content (+9%), and lycopene bioaccessibility during the intestinal digestion phase compared to untreated samples. These encouraging outcomes support the proposition of integrating HPH technology into an environmentally friendly industrial process for the full valorization of tomato processing residues. By utilizing water as the sole solvent, this approach aims to yield a functional ingredient characterized by greater nutritional and health-promoting values.
RESUMEN
Grape pomace (GP), the major winery by-product, is still rich in phenolic compounds, scarcely applied in food systems due to physicochemical instability issues. This work aimed at fabricating gliadin (G)-based nanoparticles through antisolvent precipitation, for delivery of GP extracts, investigating different extraction strategies with ethanol/water solution (70:30 v/v). Interestingly, the fabricated nanoparticles were characterized by a nanometric size range with hydraulic diameter values around 100 nm and ζ-potential of 18-22 mV. The addition of gum arabic (GA), at the optimized G/GA ratio 1:1, improved particle stability and encapsulation efficiency of GP polyphenols. The two-step extraction of GP in the G-rich solvent retrieved from G extraction, as evidenced by total phenolics (1.24 times higher than the two separately obtained extracts G/GP10:10), HPLC-PDA analysis, encapsulation efficiency (62.9% in terms of epicatechin), and simulated digestion (95.6% release of epicatechin), represented the most promising approach to obtain G nanoparticles for efficient delivery of GP extracts.
Asunto(s)
Catequina , Vitis , Vitis/química , Goma Arábiga/química , Triticum , Gliadina , Fenoles/análisis , Antioxidantes/análisis , Extractos Vegetales/químicaRESUMEN
In this study, the effects of the amylose/amylopectin content on starch gelation and the physical characteristics of hydrogels produced by HPP were studied by optical and rheological measurements in steady-state conditions. Additionally, the effects of the storage temperature (4 °C and 20 °C) and type of packaging (plastic bags or sealed Petri dishes) on the physical stability of the hydrogels were evaluated for 30 days of storage by evaluating the shrinkage of the granules, as well as the weight loss, water activity, organoleptic, and rheological properties. The experimental findings suggested that amylose plays an antagonistic role in determining the capacity of the starch granules to absorb water under pressure and to create stable and structured gels and on the physical stability of hydrogels due to its influence over the starch retrogradation extent during storage. Twenty per cent amylose was the minimum concentration to form stable corn starch HPP hydrogels with good physical and rheological properties. Moreover, a storage temperature of 20 °C and the use of polymeric bags were evaluated as the most suitable storage conditions and packaging materials enabling the long storage of corn starch hydrogels.
RESUMEN
This work aimed to carry out a preliminary study on the release of bioactive compounds loaded into starch-based hydrogels produced by high-pressure processing (HPP). As a study case, the experiments were carried out on rice starch HPP hydrogels. Rice starch (20% w/w) and green tea extract (2% w/w), suspended in distilled water, were treated by HPP at processing conditions enabling starch gelatinisation, namely 600 MPa for 15 min at room temperature. Additional experiments were carried out on samples that were further loaded with glycerol (5% w/w). Gel formation was assessed by analysing the gelatinisation extent, structuring level, and swelling power of the samples. At the processing conditions utilised, stable hydrogels were obtained even in the presence of the extract and/or the glycerol in the starch suspension. As expected, the colour of the hydrogels formed was affected by the addition of green tea extract in the starch solution. HPP starch hydrogels were characterised by Fourier transform infrared spectroscopy (FT-IR) to determine the interactions between the different compounds utilised in the formulation. Moreover, the release kinetics of bioactive compounds from HPP rice starch hydrogels was evaluated using a vertical Franz diffusion cells system, simulating a transdermal pattern. The diffusion of bioactive compounds was measured spectrophotometrically and via HPLC analysis. A controlled release of bioactive compounds from the hydrogel structure was detected, suggesting that small molecules, such as polyphenols, positively interacted with the rice starch HPP hydrogel network that allowed a smooth and constant release of these bioactive compounds over time.
RESUMEN
Introduction: The research focuses on enhancing the nutritional value and potential health benefits of gluten-free confectionery products, developing innovative pastilles and marshmallows enriched with medicinal herb extracts, probiotics, and bioactive compounds from natural sources. Methods: Physicochemical properties, including water activity, texture, and color, are assessed to evaluate the quality of the final products. Moreover, in vitro digestibility of the confectionery products is also investigated, with a focus on the release of bioactive compounds such as total phenolic compounds (TPC) and total anthocyanin (TAC) during simulated gastrointestinal digestion. Results and discussion: Results indicate that the addition of specific ingredients to pastille samples does not lead to variations in water activity (~0.44), preserving the original properties, quality, and stability of the food. In contrast, the incorporation of additives in marshmallow products significantly increases water activity (p ≤ 0.05), attributed to their moisture-retaining effect. In general, our findings reveal that texture properties and color parameters are significantly affected by different formulations (p ≤ 0.05) for both confectionery products. Notably, the use of fruit and berries puree, along with the incorporation of additives, improves the functionality of confectionary products in terms of consumer acceptance (harder pastilles and softer marshmallow) and product quality. Furthermore, the study reveals that bioactive compounds are released and become more bioaccessible during digestion, particularly in the intestinal phase, with a maximum release exceeding 97% of TPC and TAC for both pastille and marshmallow samples. These findings pave the way for the development of a new category of gluten-free confectionery products, enriched with functional ingredients that offer potential health benefits, aligning with consumer preferences for natural, functional, and health-conscious treats. This research contributes to the evolving the landscape of functional confectionery products and underscores their potential as immune-boosting and naturally based food options.
RESUMEN
BACKGROUND: Zizyphus lotus seeds are an unutilized source of vegetable oil and protein and nothing has been reported on their physicochemical characteristics which would indicate the potential uses of these seeds. RESULTS: The percentage composition of the Zizyphus lotus seeds is (on a dry-weight basis): ash 1.05%, oil 32.92%, protein 19.11%, total carbohydrate 40.87% and moisture 6.05%. Calcium, potassium and magnesium constitute the major minerals of Zizyphus lotus seeds. The seed proteins are rich in threonine, glutamic acid, leucine, arginine and aspartic acid (26.73%, 17.28%, 13.11%, 9.47% and 7.76%, respectively). The main fatty acids of the oil are oleic (61.93%), linoleic (18.31%) and palmitic (9.14%) acids. Glycerol trioleate (OOO; O: oleic acid) was the most abundant triacylglycerol, representing 26.48% of the total triacyglycerols. ß-Tocopherol was the major tocopherol (130.47 mg 100 g(-1) ). This oil was rich in Δ7-campestrol and ß-sitosterol (147.82 and 82.10 mg 100 g(-1) oil), respectively. CONCLUSION: Zizyphus lotus seeds are rich in fat and protein which are of potential industrial significance. In addition, Zizyphus lotus L. seed oil contained many bioactive compounds. This fact is of great economic interest owing to several applications of Zizyphus lotus L. seeds in the food, cosmetics and medicinal industries.
Asunto(s)
Ácidos Grasos/análisis , Micronutrientes/análisis , Aceites de Plantas/química , Proteínas de Plantas/análisis , Semillas/química , Ziziphus/química , Humanos , Valor NutritivoRESUMEN
The tomato processing industry can be considered one of the most widespread food manufacturing industries all over the world, annually generating considerable quantities of residue and determining disposal issues associated not only with the wasting of invaluable resources but also with the rise of significant environmental burdens. In this regard, previous studies have widely ascertained that tomato by-products are still rich in valuable compounds, which, once recovered, could be utilized in different industrial sectors. Currently, conventional solvent extraction is the most widely used method for the recovery of these compounds from tomato pomace. Nevertheless, several well-known drawbacks derive from this process, including the use of large quantities of solvents and the difficulties of utilizing the residual biomass. To overcome these limitations, the recent advances in extraction techniques, including the modification of the process configuration and the use of complementary novel methods to modify or destroy vegetable cells, have greatly and effectively influenced the recovery of different compounds from plant matrices. This review contributes a comprehensive overview on the valorization of tomato processing by-products with a specific focus on the use of "green technologies", including high-pressure homogenization (HPH), pulsed electric fields (PEF), supercritical fluid (SFE-CO2), ultrasounds (UAE), and microwaves (MAE), suitable to enhancing the extractability of target compounds while reducing the solvent requirement and shortening the extraction time. The effects of conventional processes and the application of green technologies are critically analyzed, and their effectiveness on the recovery of lycopene, polyphenols, cutin, pectin, oil, and proteins from tomato residues is discussed, focusing on their strengths, drawbacks, and critical factors that contribute to maximizing the extraction yields of the target compounds. Moreover, to follow the "near zero discharge concept", the utilization of a cascade approach to recover different valuable compounds and the exploitation of the residual biomass for biogas generation are also pointed out.
RESUMEN
This work proposes a biorefinery approach for the utilization of agri-food residues, such as tomato pomace (TP), through combining chemical hydrolysis with high-pressure homogenization (HPH), aiming to achieve the isolation of cellulose with tailored morphological properties from underused lignocellulose feedstocks, along with the valorization of the value-added compounds contained in the biomass. Cellulose was isolated from TP using sequential chemical hydrolysis in combination with mechanical pretreatment through HPH. The chemical and structural features of cellulose isolated from TP pretreated by HPH were compared with cellulose isolated from untreated TP through light scattering for particle size distribution, optical and scanning electron microscopy, and Fourier-transform infrared spectroscopy (FT-IR) analysis. HPH pretreatment (80 MPa, 10 passes) not only promoted a slight increase in the yield of cellulose extraction (+9%) but contributed to directly obtaining defibrillated cellulose particles, characterized by smaller irregular domains containing elongated needle-like fibers. Moreover, the selected mild chemical process produced side streams rich in bioactive molecules, evaluated in terms of total phenols and reducing activity. The liquors recovered from acid hydrolysis of TP exhibited a higher biological activity than those obtained through a conventional extraction (80% v/v acetone, 25 °C, 24 h at 180 rpm).
RESUMEN
Starch-based hydrogels are natural polymeric structures with high potential interest for food, cosmeceutical, and pharmaceutical applications. In this study, the physical stability of starch-based hydrogels produced via high-pressure processing (HPP) was evaluated using conventional and accelerated methods. For this purpose, conventional stability measurements, namely swelling power, water activity, texture, and organoleptic properties, as well as microbiological analysis of rice, corn, wheat, and tapioca starch hydrogels, were determined at different time intervals during storage at 20 °C. Additionally, to assess the stability of these structures, accelerated tests based on temperature sweep tests and oscillatory rheological measurements, as well as temperature cycling tests, were performed. The experimental results demonstrated that the physical stability of starch-based HPP hydrogels was interdependently affected by the microorganisms' action and starch retrogradation, leading to both organoleptic and texture modifications with marked reductions in swelling stability and firmness. It was concluded that tapioca starch hydrogels showed the lowest stability upon storage due to higher incidence of microbial spoilage. Accelerated tests allowed the good stability of HPP hydrogels to be predicted, evidencing good network strength and the ability to withstand temperature changes. Modifications of the rheological properties of corn, rice, and wheat hydrogels were only observed above 39 °C and at stress values 3 to 10 times higher than those necessary to modify commercial hydrogels. Moreover, structural changes to hydrogels after cycling tests were similar to those observed after 90 days of conventional storage. Data obtained in this work can be utilized to design specific storage conditions and product improvements. Moreover, the accelerated methods used in this study provided useful information, allowing the physical stability of starch-based hydrogels to be predicted.