Calculation of hygroscopic particle deposition in the human lung.

CONTEXT: Inhaled hygroscopic aerosols will absorb water vapor from the warm and humid air of the human lung, thus growing in size and consequently changing their deposition properties. OBJECTIVE: The objectives of the present study are to study the effect of a stochastic lung structure on individual particle growth and related deposition patterns and to predict local deposition patterns for different hygroscopic aerosols. MATERIALS AND METHODS: The hygroscopic particle growth model proposed by Ferron et al. has been implemented into the stochastic asymmetric lung deposition model IDEAL. Deposition patterns were calculated for sodium chloride (NaCl), cobalt chloride (CoCl2 · 6H2O), and zinc sulfate (ZnSO4 · 7H2O) aerosols, representing high, medium and low hygroscopic growth factors. RESULTS: Hygroscopic growth decreases deposition of submicron particles compared to hydrophobic particles with equivalent diameters due to a less efficient diffusion mechanism, while the more efficient impaction and sedimentation mechanisms increase total deposition for micron-sized particles. Due to the variability and asymmetry of the human airway system, individual trajectories of inhaled particles are associated with individual growth factors, thereby enhancing the variability of the resulting deposition patterns. DISCUSSION AND CONCLUSIONS: Comparisons of model predictions with several experimental data for ultrafine and micrometer-sized particles indicate good agreement, considering intersubject variations of morphometric parameters as well as differences between experimental conditions and modeling assumptions.

In vitro genotoxicity of dibutyl phthalate on A549 lung cells at air-liquid interface in exposure concentrations relevant at workplaces.

The ubiquitous use of phthalates in various materials and the knowledge about their potential adverse effects is of great concern for human health. Several studies have uncovered their role in carcinogenic events and suggest various phthalate-associated adverse health effects that include pulmonary diseases. However, only limited information on pulmonary toxicity is available considering inhalation of phthalates as the route of exposure. While in vitro studies are often based on submerged exposures, this study aimed to expose A549 alveolar epithelial cells at the air-liquid interface (ALI) to unravel the genotoxic and oxidative stress-inducing potential of dibutyl phthalate (DBP) with concentrations relevant at occupational settings. Within this scope, a computer modeling approach calculating alveolar deposition of DBP particles in the human lung was used to define in vitro ALI exposure conditions comparable to potential occupational DBP exposures. The deposited mass of DBP ranged from 0.03 to 20 ng/cm2 , which was comparable to results of a human lung particle deposition model using an 8 h workplace threshold limit value of 580 µg/m3 proposed by the Scientific Committee on Occupational Exposure Limits for the European Union. Comet and Micronucleus assay revealed that DBP induced genotoxicity at DNA and chromosome level in sub-cytotoxic conditions. Since genomic instability was accompanied by increased generation of the lipid peroxidation marker malondialdehyde, oxidative stress might play an important role in phthalate-induced genotoxicity. The results highlight the importance of adapting in vitro studies to exposure scenarios relevant at occupational settings and reconsidering occupational exposure limits for DBP.

A dose-controlled system for air-liquid interface cell exposure and application to zinc oxide nanoparticles.

BACKGROUND: Engineered nanoparticles are becoming increasingly ubiquitous and their toxicological effects on human health, as well as on the ecosystem, have become a concern. Since initial contact with nanoparticles occurs at the epithelium in the lungs (or skin, or eyes), in vitro cell studies with nanoparticles require dose-controlled systems for delivery of nanoparticles to epithelial cells cultured at the air-liquid interface. RESULTS: A novel air-liquid interface cell exposure system (ALICE) for nanoparticles in liquids is presented and validated. The ALICE generates a dense cloud of droplets with a vibrating membrane nebulizer and utilizes combined cloud settling and single particle sedimentation for fast (~10 min; entire exposure), repeatable (<12%), low-stress and efficient delivery of nanoparticles, or dissolved substances, to cells cultured at the air-liquid interface. Validation with various types of nanoparticles (Au, ZnO and carbon black nanoparticles) and solutes (such as NaCl) showed that the ALICE provided spatially uniform deposition (<1.6% variability) and had no adverse effect on the viability of a widely used alveolar human epithelial-like cell line (A549). The cell deposited dose can be controlled with a quartz crystal microbalance (QCM) over a dynamic range of at least 0.02-200 mug/cm(2). The cell-specific deposition efficiency is currently limited to 0.072 (7.2% for two commercially available 6-er transwell plates), but a deposition efficiency of up to 0.57 (57%) is possible for better cell coverage of the exposure chamber. Dose-response measurements with ZnO nanoparticles (0.3-8.5 mug/cm(2)) showed significant differences in mRNA expression of pro-inflammatory (IL-8) and oxidative stress (HO-1) markers when comparing submerged and air-liquid interface exposures. Both exposure methods showed no cellular response below 1 mug/cm(2 )ZnO, which indicates that ZnO nanoparticles are not toxic at occupationally allowed exposure levels. CONCLUSION: The ALICE is a useful tool for dose-controlled nanoparticle (or solute) exposure of cells at the air-liquid interface. Significant differences between cellular response after ZnO nanoparticle exposure under submerged and air-liquid interface conditions suggest that pharmaceutical and toxicological studies with inhaled (nano-)particles should be performed under the more realistic air-liquid interface, rather than submerged cell conditions.

Model of the deposition of aerosol particles in the respiratory tract of the rat. II. Hygroscopic particle deposition.

BACKGROUND: Rats are frequently used to study the pharmacological and toxicological effects of inhaled aerosol particles. The deposition behavior of aerosol particles in airways is affected by their hygroscopic properties, which accordingly influence the results of such studies. METHOD: A recently published nonhygroscopic aerosol particle deposition model for rat airways was extended with equations for hygroscopic particle growth in humid air and with a model to mimic the temperature and relative humidity conditions in the rat airways transformed from the upper human airways. As there are no experimental data available for hygroscopic deposition in rat lungs, several model assumptions were made for the humidity distribution in the upper rat airways. RESULTS: The total and regional deposition probability of salt particles in the diameter range 0.02 to 5 µm in rat lung was significantly changed by the hygroscopic properties. The maximum ratios of the total deposition of inhaled initially dry sodium chloride, cobalt chloride, and zinc sulfate particles compared with nonhygroscopic particles were 3.28, 2.44, and 2.13, respectively, and the minimum ratios 0.57, 0.63, and 0.70, respectively. The corresponding maximum (and minimum) ratios for the hygroscopic drugs histamine dihydrochloride, carbenicillin disodium, and atropine sulfate were 1.86 (0.65), 1.53 (0.70), and 1.35 (0.76), respectively. Total deposition was about 20% higher in human airways than in rat airways. The flow regime in the rat upper airways influenced total and regional deposition much less than it did in human airways. CONCLUSION: The hygroscopicity of salt and drug aerosol particles is an important factor in rat lung deposition.

Model for the deposition of aerosol particles in the respiratory tract of the rat. I. Nonhygroscopic particle deposition.

Rats are used to test the toxicological and pharmacological effects of aerosol particles on the organism. For estimates of the delivered aerosol dose, lung deposition models provide a valuable tool. Here a previously developed deposition model for nonhygroscopic and hygroscopic aerosol particles in the lungs of man (Ferron et al., J. Aerosol Sci. 1988, 19:611) is adapted to the rat by implementing a lung structure for the rat combined with empirical equations for particle deposition due to impaction/sedimentation in the extrathoracic region and in bifurcations. To account for the effect of body weight (BW) on the physiological parameters (lung size, respiration frequency) we present BW-scaling laws with an estimated accuracy of about 16%. The present model shows good agreement with the measured total deposition (per breath) and other models from the literature to within the variability of the experimental data (20% absolute). Our calculations show that the variability of the experimental data is consistent with the combined effects from realistic variations in particle properties (mainly density) and physiological parameters (mainly activity level). For the alveolar region, which is of particular significance for pharmacological and health studies, we show that although the activity level may change the deposited dose by up to a factor of 2.2 for particles between 0.05 and 2.0 microm in diameter, the alveolar dose is almost independent (to within 10%) of activity level for particles between 0.5 and 1 microm, which makes this size range advantageous for pharmacological and toxicological experiments. The present model allows estimates of the total and regional particle dose deposited in the lungs of rats, which are consistent with experimental data. The advantage of the present model is that hygroscopic growth can be included in the calculations.

Pulmonary and systemic effects of short-term inhalation exposure to ultrafine carbon black particles.

While environmental particles are associated with mortality and morbidity related to pulmonary and cardiovascular (CV) disease, the mechanisms involved in CV health effects are not known. Changes in systemic clotting factors have been associated with pulmonary inflammation. We hypothesized that inhaled ultrafine particles result in an inflammatory response which may stimulate systemic clotting factor release. Adult male Wistar rats were exposed to either fine or ultrafine carbon black (CB) for 7 h. The attained total suspended particle concentrations were 1.66 mg/m(3) for ultrafine CB and 1.40 mg/m(3) for fine CB. Particle concentration of ultrafine particles was more than 10 times greater than that of fine particles and the count median aerodynamic diameter averaged 114 nm for the ultrafine and 268 nm for the fine carbon particles. Data were collected immediately, 16 and 48 h following exposure. Only ultrafine CB caused an increase in total bronchoalveolar lavage (BAL) leukocytes, whereas both fine (2-fold) and ultrafine (4-fold) carbon particles caused an increase in BAL neutrophils at 16 h postexposure. Exposure to the ultrafine, but not fine, carbon was also associated with significant increases in the total numbers of blood leukocytes. Plasma fibrinogen, factor VII and von Willebrand factor (vWF) were unaffected by particle treatments as was plasma Trolox equivalent antioxidant status (TEAC). Macrophage inflammatory protein-2 mRNA was significantly increased in BAL cells 48 h following exposure to ultrafine CB. The data show that there is a small but consistent significant proinflammatory effect of this exposure to ultrafine particles that is greater than the effect of the same exposure to fine CB.