Biocatalytic routes to anti-viral agents and their synthetic intermediates.

With recent outbreaks of COVID-19 and Ebola, health and healthcare have once more shown to be heavily burdened by the lack of generally effective anti-viral therapies. Initial scientific ventures towards finding anti-viral agents are soon to be followed by challenges regarding their mass production. Biocatalysis offers mild, highly selective, and environmentally benign synthetic strategies for the production of pharmaceuticals in a sustainable fashion. Here we summarise biocatalytic methods that have been applied to the production of FDA-approved anti-viral drugs and their intermediates. Exemplary are the enzymatic asymmetric synthesis of amino acid components, the fermentative production of structurally complex intermediates of anti-influenza drugs and the fully enzymatic, large-scale synthesis of a potential block-buster HIV drug. With many enzyme classes being uncharted with regards to the synthesis of anti-viral agents, there is still a large unopened toolbox waiting to be unlocked. Additionally, by discussing biocatalytic strategies towards potential anti-viral agents against SARS-CoV-2, we hope to contribute to the development of novel synthetic routes to aid in the mass production of a future treatment of COVID-19.

An α2,3-Sialyltransferase from Photobacterium phosphoreum with Broad Substrate Scope: Controlling Hydrolytic Activity by Directed Evolution.

Defined sialoglycoconjugates are important molecular probes for studying the role of sialylated glycans in biological systems. We show that the α2,3-sialyltransferase from Photobacterium phosphoreum JT-ISH-467 (2,3SiaTpph ) tolerates a very broad substrate scope for modifications in the sialic acid part, including bulky amide variation, C5/C9 substitution, and C5 stereoinversion. To reduce the enzyme's hydrolytic activity, which erodes the product yield, an extensive structure-guided mutagenesis study identified three variants that show up to five times higher catalytic efficiency for sialyltransfer, up to ten times lower efficiency for substrate hydrolysis, and drastically reduced product hydrolysis. Variant 2,3SiaTpph (A151D) displayed the best performance overall in the synthesis of the GM3 trisaccharide (α2,3-Neu5Ac-Lac) from lactose in a one-pot, two-enzyme cascade. Our study demonstrates that several complementary solutions can be found to suppress the common problem of undesired hydrolysis activity of microbial GT80 sialyltransferases. The new enzymes are powerful catalysts for the synthesis of a wide variety of complex natural and new-to-nature sialoconjugates for biological studies.

Aldolase-Catalyzed Asymmetric Synthesis of N-Heterocycles by Addition of Simple Aliphatic Nucleophiles to Aminoaldehydes.

Nitrogen heterocycles are structural motifs found in many bioactive natural products and of utmost importance in pharmaceutical drug development. In this work, a stereoselective synthesis of functionalized N-heterocycles was accomplished in two steps, comprising the biocatalytic aldol addition of ethanal and simple aliphatic ketones such as propanone, butanone, 3-pentanone, cyclobutanone, and cyclopentanone to N-Cbz-protected aminoaldehydes using engineered variants of d-fructose-6-phosphate aldolase from Escherichia coli (FSA) or 2-deoxy-d-ribose-5-phosphate aldolase from Thermotoga maritima (DERA Tma ) as catalysts. FSA catalyzed most of the additions of ketones while DERA Tma was restricted to ethanal and propanone. Subsequent treatment with hydrogen in the presence of palladium over charcoal, yielded low-level oxygenated N-heterocyclic derivatives of piperidine, pyrrolidine and N-bicyclic structures bearing fused cyclobutane and cyclopentane rings, with stereoselectivities of 96-98 ee and 97:3 dr in isolated yields ranging from 35 to 79%.

Fluorogenic kinetic assay for high-throughput discovery of stereoselective ketoreductases relevant to pharmaceutical synthesis.

Enantiomerically pure 1-(6-methoxynaphth-2-yl) and 1-(6-(dimethylamino)naphth-2-yl) carbinols are fluorogenic substrates for aldo/keto reductase (KRED) enzymes, which allow the highly sensitive and reliable determination of activity and kinetic constants of known and unknown enzymes, as well as an immediate enantioselectivity typing. Because of its simplicity in microtiter plate format, the assay qualifies for the discovery of novel KREDs of yet unknown specificity among this vast enzyme superfamily. The suitability of this approach for enzyme typing is illustrated by an exemplary screening of a large collection of short-chain dehydrogenase/reductase (SDR) enzymes arrayed from a metagenomic approach. We believe that this assay format should match well the pharmaceutical industry's demand for acetophenone-type substrates and the continuing interest in new enzymes with broad substrate promiscuity for the synthesis of chiral, non-racemic carbinols.

Complete Switch of Reaction Specificity of an Aldolase by Directed Evolution In Vitro: Synthesis of Generic Aliphatic Aldol Products.

A structure-guided engineering of fructose-6-phosphate aldolase was performed to expand its substrate promiscuity toward aliphatic nucleophiles, that is, unsubstituted alkanones and alkanals. A "smart" combinatorial library was created targeting residues D6, T26, and N28, which form a binding pocket around the nucleophilic carbon atom. Double-selectivity screening was executed by high-performance TLC that allowed simultaneous determination of total activity as well as a preference for acetone versus propanal as competing nucleophiles. D6 turned out to be the key residue that enabled activity with non-hydroxylated nucleophiles. Altogether 25 single- and double-site variants (D6X and D6X/T26X) were discovered that show useful synthetic activity and a varying preference for ketone or aldehyde as the aldol nucleophiles. Remarkably, all of the novel variants had completely lost their native activity for cleavage of fructose 6-phosphate.

Second-Generation Engineering of a Thermostable Transketolase (TKGst ) for Aliphatic Aldehyde Acceptors with Either Improved or Reversed Stereoselectivity.

The transketolase from Geobacillus stearothermophilus (TKGst ) is a thermostable enzyme with notable high activity and stability at elevated temperatures, but it accepts non-α-hydroxylated aldehydes only with low efficiency. Here we report a protein engineering study of TKGst based on double-site saturation mutagenesis either at Leu191 or at Phe435 in combination with Asp470; these are the residues responsible for substrate binding in the active site. Screening of the mutagenesis libraries resulted in several positive variants with activity towards propanal up to 7.4 times higher than that of the wild type. Variants F435L/D470E and L191V/D470I exhibited improved (73 % ee, 3S) and inverted (74 % ee, 3R) stereoselectivity, respectively, for propanal. L191V, L382F/E, F435L, and D470/D470I were concluded to be positive mutations at Leu191, Leu382, Phe435, and Asp470 both for activity and for stereoselectivity improvement. These results should benefit further engineering of TKGst for various applications in asymmetric carboligation.

Breaking the Dogma of Aldolase Specificity: Simple Aliphatic Ketones and Aldehydes are Nucleophiles for Fructose-6-phosphate Aldolase.

d-Fructose-6-phosphate aldolase (FSA) was probed for extended nucleophile promiscuity by using a series of fluorogenic substrates to reveal retro-aldol activity. Four nucleophiles ethanal, propanone, butanone, and cyclopentanone were subsequently confirmed to be non-natural substrates in the synthesis direction using the wild-type enzyme and its D6H variant. This exceptional widening of the nucleophile substrate scope offers a rapid entry, in good yields and high stereoselectivity, to less oxygenated alkyl ketones and aldehydes, which was hitherto impossible.

Direct Enzymatic Branch-End Extension of Glycocluster-Presented Glycans: An Effective Strategy for Programming Glycan Bioactivity.

The sequence of a glycan and its topology of presentation team up to determine the specificity and selectivity of recognition by saccharide receptors (lectins). Structure-activity analysis would be furthered if the glycan part of a glycocluster could be efficiently elaborated in situ while keeping all other parameters constant. By using a bacterial α2,6-sialyltransferase and a small library of bi- to tetravalent glycoclusters, we illustrate the complete conversion of scaffold-presented lactoside units into two different sialylated ligands based on N-acetyl/glycolyl-neuraminic acid incorporation. We assess the ensuing effect on their bioactivity for a plant toxin, and present an analysis of the noncovalent substrate binding contacts that the added sialic acid moiety makes to the lectin. Enzymatic diversification of a scaffold-presented glycan can thus be brought to completion in situ, offering a versatile perspective for rational glycocluster engineering.

Complete tetraglycosylation of a calix[4]arene by a chemo-enzymatic approach.

Polyglycosylated calixarenes are efficient and selective multivalent ligands for lectins. However, the chemical decoration of these macrocyclic scaffolds with saccharides of increasing complexity is hampered by the highly complex chemistry of carbohydrates. An alternative to the conventional approach is the enzymatic diversification of simple glycocluster-presented glycans. In this work, we present a highly efficient chemo-enzymatic approach to tetra-N-acetyl-lactosaminylcalix[4]arene via glycan extension catalyzed by a human ß-1,4-galactosyltransferase. This demonstrates that calixarenes can be exhaustively processed by enzymatic glycosyl transfer despite the heavy steric crowding, paving the way to the design and achievement of multivalent ligands based on these macrocyclic scaffolds having complex branched glycans.

Donor Promiscuity of a Thermostable Transketolase by Directed Evolution: Efficient Complementation of 1-Deoxy-d-xylulose-5-phosphate Synthase Activity.

Enzymes catalyzing asymmetric carboligation reactions typically show very high substrate specificity for their nucleophilic donor substrate components. Structure-guided engineering of the thermostable transketolase from Geobacillus stearothermophilus by directed in vitro evolution yielded new enzyme variants that are able to utilize pyruvate and higher aliphatic homologues as nucleophilic components for acyl transfer instead of the natural polyhydroxylated ketose phosphates or hydroxypyruvate. The single mutant H102T proved the best hit toward 3-methyl-2-oxobutyrate as donor, while the double variant H102L/H474S showed highest catalytic efficiency toward pyruvate as donor. The latter variant was able to complement the auxotrophic deficiency of Escherichia coli cells arising from a deletion of the dxs gene, which encodes for activity of the first committed step into the terpenoid biosynthesis, offering the chance to employ a growth selection test for further enzyme optimization.

Cascade enzymatic synthesis of a statin side chain precursor - the role of reaction engineering in process optimization.

Statins are an important class of drugs used to lower blood cholesterol levels and are often used to combat cardiovascular disease. In view of the importance of safe and reliable supply and production of statins in modern medicine and the global need for sustainable processes, various biocatalytic strategies for their synthesis have been investigated. In this work, a novel biocatalytic route to a statin side chain precursor was investigated in a one-pot cascade reaction starting from the protected alcohol N-(3-hydroxypropyl)-2-phenylacetamide, which is oxidized to the corresponding aldehyde in the first reaction step, and then reacts with two equivalents of acetaldehyde to form the final product N-(2-((2S,4S,6S)-4,6-dihydroxytetrahydro-2H-pyran-2-yl)ethyl)-2-phenylacetamide (phenylacetamide-lactol). To study this complex reaction, an enzyme reaction engineering approach was used, i.e. the kinetics of all reactions occurring in the cascade (including side reactions) were determined. The obtained kinetic model together with the simulations gave an insight into the system and indicated the best reactor mode for the studied reaction, which was fed-batch with acetaldehyde feed to minimize its negative effect on the enzyme activity during the reaction. The mathematical model of the process was developed and used to simulate different scenarios and to find the reaction conditions (enzyme and coenzyme concentration, substrate feed concentration and flow rate) at which the highest yield of phenylacetamide-lactol (75%) can be obtained. In the end, our goal was to show that this novel cascade route is an interesting alternative for the synthesis of the statin side chain precursor and that is why we also calculated an initial estimate of the potential value addition.

A pH-based high-throughput assay for transketolase: fingerprinting of substrate tolerance and quantitative kinetics.

A pH-based high-throughput assay method has been developed for the rapid and reliable measurement of transketolase (TK) activity. The method is based on the decarboxylation of lithium hydroxypyruvate (HPA) as a hydroxyacetyl donor with an aldehyde acceptor, using phenol red as the pH indicator. Upon release of carbon dioxide from HPA, the pH increase in the reaction mixture can be determined photometrically by the color change of the pH indicator. At low buffer concentration (2 mM triethanolamine, pH 7.5), the method is highly sensitive and allows continuous monitoring, for quantitative determination of the kinetic parameters. By using this method, the substrate specificities of the TK enzymes from Escherichia coli and Saccharomyces cerevisiae, as well as two active-site-modified variants of the E. coli TK (D469E, H26Y) were evaluated against a panel of substrate analogues; specific activities and kinetic constants could be rapidly determined. Substrate quality indicated by assay determination was substantiated with novel TK applications by using achiral 3-hydroxypropanal and 4-hydroxybutanal for preparative synthesis of chiral deoxyketose-type products. Determination of ee for the latter could be performed by chiral GC analysis, with an unambiguous correlation of the absolute configuration from rotation data. This pH-based assay method is broadly applicable and allows rapid, sensitive, and reliable screening of the substrate tolerance of known TK enzymes and variants obtained from directed evolution.

The transaldolase family: new synthetic opportunities from an ancient enzyme scaffold.

Aldol reactions constitute a powerful methodology for carbon-carbon bond formation in synthetic organic chemistry. Biocatalytic carboligation by aldolases offers a green, uniquely regio- and stereoselective tool with which to perform these transformations. Recent advances in the field, fueled by both discovery and protein engineering, have greatly improved the synthetic opportunities for the atom-economic asymmetric synthesis of chiral molecules with potential pharmaceutical relevance. New aldolases derived from the transaldolase scaffold (based on transaldolase B and fructose-6-phosphate aldolase from Escherichia coli) have been shown to be unusually flexible in their substrate scope; this makes them particularly valuable for addressing an expanded molecular range of complex polyfunctional targets. Extensive knowledge arising from structural and molecular biochemical studies makes it possible to address the remaining limitations of the methodology by engineering tailored biocatalysts.

Broadening deoxysugar glycodiversity: natural and engineered transaldolases unlock a complementary substrate space.

The majority of prokaryotic drugs are produced in glycosylated form, with the deoxygenation level in the sugar moiety having a profound influence on the drug's bioprofile. Chemical deoxygenation is challenging due to the need for tedious protective group manipulations. For a direct biocatalytic de novo generation of deoxysugars by carboligation, with regiocontrol over deoxygenation sites determined by the choice of enzyme and aldol components, we have investigated the substrate scope of the F178Y mutant of transaldolase B, TalB(F178Y), and fructose 6-phosphate aldolase, FSA, from E. coli against a panel of variously deoxygenated aldehydes and ketones as aldol acceptors and donors, respectively. Independent of substrate structure, both enzymes catalyze a stereospecific carboligation resulting in the D-threo configuration. In combination, these enzymes have allowed the preparation of a total of 22 out of 24 deoxygenated ketose-type products, many of which are inaccessible by available enzymes, from a [3×8] substrate matrix. Although aliphatic and hydroxylated aliphatic aldehydes were good substrates, D-lactaldehyde was found to be an inhibitor possibly as a consequence of inactive substrate binding to the catalytic Lys residue. A 1-hydroxy-2-alkanone moiety was identified as a common requirement for the donor substrate, whereas propanone and butanone were inactive. For reactions involving dihydroxypropanone, TalB(F178Y) proved to be the superior catalyst, whereas for reactions involving 1-hydroxybutanone, FSA is the only choice; for conversions using hydroxypropanone, both TalB(F178Y) and FSA are suitable. Structure-guided mutagenesis of Ser176 to Ala in the distant binding pocket of TalB(F178Y), in analogy with the FSA active site, further improved the acceptance of hydroxypropanone. Together, these catalysts are valuable new entries to an expanding toolbox of biocatalytic carboligation and complement each other well in their addressable constitutional space for the stereospecific preparation of deoxysugars.

Towards click bioconjugations on cube-octameric silsesquioxane scaffolds.

Cube-octameric silsesquioxane (POSS) based conjugation scaffolds for copper catalysed azide-alkyne [3+2] cycloaddition are reported. The synthetic route to octaazido and octaalkyno functionalised POSS templates without cage rearrangements is described. A set of click couplings is conducted including the first effective conjugation with a fully unprotected functional peptide towards a POSS assembled peptide octamer.

Winning the numbers game in enzyme evolution - fast screening methods for improved biotechnology proteins.

The booming demand for environmentally benign industrial processes relies on the ability to quickly find or engineer a biocatalyst suitable to ideal process conditions. Both metagenomic approaches and directed evolution involve the screening of huge libraries of protein variants, which can only be managed reasonably by flexible platforms for (ultra)high-throughput profiling against the desired criteria. Here, we review the most recent additions toward a growing toolbox of versatile assays using fluorescence, absorbance and mass spectrometry readouts. While conventional solution based high-throughput screening in microtiter plate formats is still important, the implementation of novel screening protocols for microfluidic cell or droplet sorting systems supports technological advances for ultra-high-frequency screening that now can dramatically reduce the timescale of engineering projects. We discuss practical issues of scope, scalability, sensitivity and stereoselectivity for the improvement of biotechnologically relevant enzymes from different classes.

nanoDSF as screening tool for enzyme libraries and biotechnology development.

Enzymes are attractive tools for synthetic applications. To be viable for industrial use, enzymes need sufficient stability towards the desired reaction conditions such as high substrate and cosolvent concentration, non-neutral pH and elevated temperatures. Thermal stability is an attractive feature not only because it allows for protein purification by thermal treatment and higher process temperatures but also due to the associated higher stability against other destabilising factors. Therefore, high-throughput screening (HTS) methods are desirable for the identification of thermostable biocatalysts by discovery from nature or by protein engineering but current methods have low throughput and require time-demanding purification of protein samples. We found that nanoscale differential scanning fluorimetry (nanoDSF) is a valuable tool to rapidly and reliably determine melting points of native proteins. To avoid intrinsic problems posed by crude protein extracts, hypotonic extraction of overexpressed protein from bacterial host cells resulted in higher sample quality and accurate manual determination of several hundred melting temperatures per day. We have probed the use of nanoDSF for HTS of a phylogenetically diverse aldolase library to identify novel thermostable enzymes from metagenomic sources and for the rapid measurements of variants from saturation mutagenesis. The feasibility of nanoDSF for the screening of synthetic reaction conditions was proved by studies of cosolvent tolerance, which showed protein melting temperature to decrease linearly with increasing cosolvent concentration for all combinations of six enzymes and eight water-miscible cosolvents investigated, and of substrate affinity, which showed stabilisation of hexokinase by sugars in the absence of ATP cofactor. ENZYMES: Alcohol dehydrogenase (NADP+ ) (EC 1.1.1.2), transketolase (EC 2.2.1.1), hexokinase (EC 2.7.1.1), 2-deoxyribose-5-phosphate aldolase (EC 4.1.2.4), fructose-6-phosphate aldolase (EC 4.1.2.n).

Biocatalytic Aldol Addition of Simple Aliphatic Nucleophiles to Hydroxyaldehydes.

Asymmetric aldol addition of simple aldehydes and ketones to electrophiles is a cornerstone reaction for the synthesis of unusual sugars and chiral building blocks. We investigated d-fructose-6-phosphate aldolase from E. coli (FSA) D6X variants as catalysts for the aldol additions of ethanal and nonfunctionalized linear and cyclic aliphatic ketones as nucleophiles to nonphosphorylated hydroxyaldehydes. Thus, addition of propanone, cyclobutanone, cyclopentanone, or ethanal to 3-hydroxypropanal or (S)- or (R)-3-hydroxybutanal catalyzed by FSA D6H and D6Q variants furnished rare deoxysugars in 8-77% isolated yields with high stereoselectivity (97:3 dr and >95% ee).

Illuminating structure and acyl donor sites of a physiological transglutaminase substrate from Streptomyces mobaraensis.

Transglutaminase from Streptomyces mobaraensis (MTG) has become a powerful tool to covalently and highly specifically link functional amines to glutamine donor sites of therapeutic proteins. However, details regarding the mechanism of substrate recognition and interaction of the enzyme with proteinaceous substrates still remain mostly elusive. We have determined the crystal structure of the Streptomyces papain inhibitory protein (SPIp ), a substrate of MTG, to study the influence of various substrate amino acids on positioning glutamine to the active site of MTG. SPIp exhibits a rigid, thermo-resistant double-psi-beta-barrel fold that is stabilized by two cysteine bridges. Incorporation of biotin cadaverine identified Gln-6 as the only amine acceptor site on SPIp accessible for MTG. Substitution of Lys-7 demonstrated that small and hydrophobic residues in close proximity to Gln-6 favor MTG-mediated modification and are likely to facilitate introduction of the substrate into the front vestibule of MTG. Moreover, exchange of various surface residues of SPIp for arginine and glutamate/aspartate outside the glutamine donor region influences the efficiency of modification by MTG. These results suggest the occurrence of charged contact areas between MTG and the acyl donor substrates beyond the front vestibule, and pave the way for protein engineering approaches to improve the properties of artificial MTG-substrates used in biomedical applications.