Tweaking the Optoelectronic Properties of S-Doped Polycyclic Aromatic Hydrocarbons by Chemical Oxidation.

Peri-thiaxanthenothiaxanthene, an S-doped analog of peri-xanthenoxanthene, is used as a polycyclic aromatic hydrocarbon (PAH) scaffold to tune the molecular semiconductor properties by editing the oxidation state of the S-atoms. Chemical oxidation of peri-thiaxanthenothiaxanthene with H2 O2 led to the relevant sulfoxide and sulfone congeners, whereas electrooxidation gave access to sulfonium-type derivatives forming crystalline mixed valence (MV) complexes. These complexes depicted peculiar molecular and solid-state arrangements with face-to-face π-π stacking organization. Photophysical studies showed a widening of the optical bandgap upon progressive oxidation of the S-atoms, with the bis-sulfone derivative displaying the largest value (E00 =2.99 eV). While peri-thiaxanthenothiaxanthene showed reversible oxidation properties, the sulfoxide and sulfone derivatives mainly showed reductive events, corroborating their n-type properties. Electric measurements of single crystals of the MV complexes exhibited a semiconducting behavior with a remarkably high conductivity at room temperature (10-1 -10-2  S cm-1 and 10-2 -10-3  S cm-1 for the O and S derivatives, respectively), one of the highest reported so far. Finally, the electroluminescence properties of the complexes were tested in light-emitting electrochemical cells (LECs), obtaining the first S-doped mid-emitting PAH-based LECs.

Supramolecular Chalcogen-Bonded Semiconducting Nanoribbons at Work in Lighting Devices.

This work describes the design and synthesis of a π-conjugated telluro[3,2-ß][1]-tellurophene-based synthon that, embodying pyridyl and haloaryl chalcogen-bonding acceptors, self-assembles into nanoribbons through chalcogen bonds. The ribbons π-stack in a multi-layered architecture both in single crystals and thin films. Theoretical studies of the electronic states of chalcogen-bonded material showed the presence of a local charge density between Te and N atoms. OTFT-based charge transport measurements showed hole-transport properties for this material. Its integration as a p-type semiconductor in multi-layered CuI -based light-emitting electrochemical cells (LECs) led to a 10-fold increase in stability (38 h vs. 3 h) compared to single-layered devices. Finally, using the reference tellurotellurophene congener bearing a C-H group instead of the pyridyl N atom, a herringbone solid-state assembly is formed without charge transport features, resulting in LECs with poor stabilities (<1 h).

Polypyridyl ligands as a versatile platform for solid-state light-emitting devices.

The replacement of inorganic semiconductors with molecule-based compounds for applications in current-to-light conversion has led to a significant increase in interdisciplinary collaborations worldwide, affording new improved organic-light emitting diodes (OLEDs) ripe for commercial applications, as well as light-emitting electrochemical cells (LECs) that have recently started to head to the market. This review highlights the role that transition metal coordination complexes (TMCs) have played in advancing the field of molecular electronics, from early conception to the advanced development of several polypyridyl complexes currently pursued for both OLED and LEC concepts. In this context, the design and synthesis of Ir(iii), Pt(ii), Cu(i) and Ag(i) complexes as the emissive components of OLEDs and LECs are thoughtfully presented. We discuss how molecular design is pivotal for fine-tuning color and optimizing power efficiencies, highlighting the key roles of the metal, cyclometalate, and ancillary polypyridyl ligands. We provide insight into the strategies exploited for the development of new, improved emitters and their fabrication into OLEDs/LECs with high external quantum efficiencies and stabilities. In addition, we have surveyed the remarkable photophysical properties of third generation TMCs capable of undergoing thermally activated delayed fluorescence (TADF). Since previous reviews of TADF materials are strongly biased towards organic-based systems, this overview compliments other synopses of light emitting TADF materials. Finally, we shed light onto the conceptual challenges that still need to be overcome to advance the rational design of TMC-based TADF emitters with tunable ligands and the subsequent fabrication of OLEDs/LECs, which are tailor-made for each specific application.

Novel Ligand and Device Designs for Stable Light-Emitting Electrochemical Cells Based on Heteroleptic Copper(I) Complexes.

This work reports on the positive impact of (i) attaching methoxy groups at the ortho position of the bipyridine ligand (6,6'-dimethoxy-2,2'-bipyridine) in heteroleptic copper(I) complexes belonging to the [Cu(bpy)(POP)]+ family, and (ii) a new device design comprising a multilayered architecture to decouple hole/electron injection and transport processes on the performance of light-emitting electrochemical cells (LECs). In short, the substituted complex showed enhanced thermal- and photostability, photoluminescence, and ionic conductivity features in thin films compared to those of the archetypal complex without substitution. These beneficial features led to LECs outperforming reference devices in terms of luminance, stability, and efficacy. Furthermore, a new device design resulted in a 10-fold enhancement of the stability without negatively affecting the other figures of merit. Here, hole/electron injection and transport processes are performed at two different layers, while electron injection and electron-hole recombination occur at the copper(I) complex layer. As such, this work provides further insights into a smart design of N^N ligands for copper(I) complexes, opening the path to a simple device architecture toward an enhanced electroluminescence response.

Multivariate Analysis Identifying [Cu(N

White light-emitting electrochemical cells (LECs) comprising only [Cu(N^N)(P^P)]+ have not been reported yet, as all the attempts toward blue-emitting complexes failed. Multivariate analysis, based on prior-art [Cu(N^N)(P^P)]+ -based thin-film lighting (>90 papers) and refined with computational calculations, identifies the best blue-emitting [Cu(N^N)(P^P)]+ design for LECs, that is, N^N: 2-(4-(tert-butyl)phenyl)-6-(3,5-dimethyl-1H-pyrazol-1-yl)pyridine and P^P: 4,5-bis(diphenylphosphino)-9,9-dimethylxanthene, to achieve predicted thin-film emission at 490 nm and device performance of 3.8 cd A-1 @170 cd m-2 . Validation comes from synthesis, X-ray structure, thin-film spectroscopic/microscopy/electrochemical characterization, and device optimization, realizing the first [Cu(N^N)(P^P)]+ -based blue-LEC with 3.6 cd A-1 @180 cd m-2 . This represents a record performance compared to the state-of-the-art tricoordinate Cu(I)-complexes blue-LECs (0.17 cd A-1 @20 cd m-2 ). Versatility is confirmed with the synthesis of the analogous complex with 2-(4-(tert-butyl)phenyl)-6-(3,5-dimethyl-1H-pyrazol-1-yl)pyrazine (N^N), showing a close prediction/experiment match: λ = 590/580 nm; efficiency = 0.55/0.60 cd A-1 @30 cd m-2 . Finally, experimental design is applied to fabricate the best white multicomponent host:guest LEC, reducing the number of trial-error attempts toward the first white all-[Cu(N^N)(P^P)]+ -LECs with 0.6 cd A-1 @30 cd m-2 . This corresponds to approximately ten-fold enhancement compared to previous LECs (<0.05 cd A-1 @<12 cd m-2 ). Hence, this work sets in the first multivariate approach to design emitters/active layers, accomplishing first-class [Cu(N^N)(P^P)]+ -based blue/white LECs that were previously elusive.

Towards rainbow photo/electro-luminescence in copper(i) complexes with the versatile bridged bis-pyridyl ancillary ligand.

The synthesis and characterization of a family of copper(i) complexes bearing a bridged bis-pyridyl ancillary ligand is reported, highlighting how the bridge nature impacts the photo- and electro-luminescent behaviours within the family. In particular, the phosphonium bridge led to copper(i) complexes featuring good electrochemical stability and high ionic conductivity, as well as a stark blue-to-orange luminescence shift compared to the others. This resulted in high performance light-emitting electrochemical cells reaching stabilities of 10 mJ at ca. 40 cd m-2 that are one order of magnitude higher than those of the other complexes. Overall, this work sheds light onto the crucial role of the bridge nature of the bis-pyridyl ancillary ligand on the photophysical features, film forming and, in turn, on the final device performances.

Revealing the Impact of Heat Generation Using Nanographene-Based Light-Emitting Electrochemical Cells.

Self-heating in light-emitting electrochemical cells (LECs) has been long overlooked, while it has a significant impact on (i) device chromaticity by changing the electroluminescent band shape, (ii) device efficiency because of thermal quenching and exciton dissociation reducing the external quantum efficiency (EQE), and (iii) device stability because of thermal degradation of excitons and eliminate doped species, phase separation, and collapse of the intrinsic emitting zone. Herein, we reveal, for the first time, a direct relationship between self-heating and the early changes in the device chromaticity as well as the magnitude of the error comparing theoretical/experimental EQEs-that is, an overestimation error of ca. 35% at usual pixel working temperatures of around 50 °C. This has been realized in LECs using a benchmark nanographene-that is, a substituted hexa-peri-hexabenzocoronene-as an emerging class of emitters with outstanding device performance compared to the prior art of small-molecule LECs-for example, luminances of 345 cd/m2 and EQEs of 0.35%. As such, this work is a fundamental contribution highlighting how self-heating is a critical limitation toward the optimization and wide use of LECs.

Bright, stable, and efficient red light-emitting electrochemical cells using contorted nanographenes.

This work rationalizes, for the first time, the electroluminescent behavior of a representative red-emitting contorted nanographene -i.e., hexabenzoovalene derivative - in small molecule light-emitting electrochemical cells (SM-LECs). This new emitter provides devices with irradiances of ca. 220 µW cm-2 (242 cd m-2), external quantum efficiencies (EQE) of 0.78% (<25% loss of the maximum theoretical EQE), and stabilities over 200 h. Upon optimizing the device architecture, the stability increased up to 3600 h (measured) and 13 000 h (extrapolated) at a high brightness of ca. 30 µW cm-2 (34 cd m-2). This represents a record stability at a high brightness level compared to the state-of-the-art SM-LECs (1000 h at 0.3 µW cm-2). In addition, we rationalized one of the very rare LEC examples in which the changes of the electroluminescence band shape relates to the dependence of the relative intensity of the vibrational peaks with electric field, as corroborated by dynamic electrochemical impedance spectroscopy assays. Nevertheless, this exclusive electroluminescence behavior does not affect the device color, realizing one of the most stable, bright, and efficient red-emitting SM-LECs up to date.

Photoluminescent Cu(i) vs. Ag(i) complexes: slowing down emission in Cu(i) complexes by pentacoordinate low-lying excited states.

This work describes the synthesis, and structural, spectroscopic, and theoretical studies of a mononuclear silver(i) complex with the formula [Ag(Xantphos)(4,4'-(MeO)2-2,2'-bipy)]BF4·DCM (1·BF4) [Xantphos: 4,5-bis(diphenylphosphino)-9,9'-dimethylxanthene]. We provide meaningful insights into the enhancement of the photoluminescence features of this silver(i) complex compared to its copper(i) analogue.

Peripheral Substitution of Tetraphenyl Porphyrins: Fine-Tuning Self-Assembly for Enhanced Electroluminescence.

This study reports the synthesis of two novel zinc porphyrin families bearing four or eight alkoxy chains at their peripheral phenyl rings, with the length of the alkoxy chains ranging from 2, to 6, and to 12 carbon atoms. All zinc porphyrin derivatives were fully characterized with respect to their photophysical and electrochemical features. The zinc porphyrins could be processed into thin films which, depending on the length of the alkoxy chains on the aryl substituents, were found to be either of an ordered or a disordered nature, as it is revealed by spectroscopic and microscopic techniques. The films containing ordered self-assemblies displayed significantly enhanced electrical conductivity compared to the disordered films. This led to remarkable differences regarding their electroluminescence response that occurs at lower bias. Furthermore, their luminous efficiency was of almost one order of magnitude higher than that of disordered films.