Stereoselective Ring Expansion Metathesis Polymerization with Cationic Molybdenum Alkylidyne N-Heterocyclic Carbene Complexes.

Molybdenum alkylidyne N-heterocyclic carbene (NHC) complexes of the type [Mo(C-p-C6H4Y)(OC(R)(CF3)2)2 (L)(NHC)][B(ArF)4] (Y = OMe, NO2; R = CH3, CF3; L = none, pivalonitrile, tetrahydrofuran; NHC = 1,3-dimesitylimidazol-2-ylidene (IMes), 1,3-dimesityl-3,4-dihydroimidazol-2-ylidene (IMesH2), 1,3-dimesityl-3,4-dichloroimidazol-2-ylidene (IMesCl2), 1,3-diisopropylimidazol-2-ylidene (IiPr); B(ArF)4- = tetrakis(3,5-bis(trifluoromethyl)phen-1-yl)borate) were used in the ring expansion metathesis polymerization (REMP) of cyclic olefins. With cis-cyclooctene (cCOE) cyclic, low molecular weight oligomers were obtained at low monomer concentrations and the cyclic nature of the polymer was confirmed by MALDI-TOF measurements. High-molecular weight cyclic poly(cCOE) became available at high monomer concentrations. Also, post-REMP allowed for converting low-molecular-weight cyclic poly(cCOE) into high-molecular-weight cyclic poly(cCOE). Tailored catalysts together with suitable additives offered access to the stereoselective REMP of functional norbornenes providing functional cis-isotactic (cis-it), cis-syndiotactic (cis-st) and trans-it poly(norbornene)s with up to 99% stereoselectivity. Mechanistic details supported by density functional theory (DFT) calculations are outlined.

A Fluorinated Chaperone Gives X-ray Crystal Structures of Acyclic Natural Product Derivatives up to 338 Molecular Weight.

Crystallizing molecules with long flexible chains is a challenge, making it difficult to perform X-ray crystallography. Chaperones can assist in the crystallization of compounds that do not crystallize by themselves by producing solvate crystals that contain the analyte in their three-dimensional lattices. Among the most versatile chaperones for liquid analytes are tetraaryladamantanes (TAAs), but the size of the compounds that can be encapsulated is limited, and attempts to surpass this limit with known TAAs were unsuccessful. Here we report that 1,3,5,7-tetrakis(2-fluoro-4-methoxyphenyl)adamantane (TFM) is a crystallization chaperone for acyclic molecules up to the molecular weight of phytyl acetate (338 g/mol). Encapsulation of such a large acyclic compound was achieved when the analyte was esterified and when a two-step temperature protocol was used for crystallization. Exploratory work indicates that a drop to -20 °C allows for encapsulation of squalene (Mr 411 g/mol), albeit with positional disorder of the analyte. Our X-ray crystal structures of solvates with flexible analytes shed light on how crystalline order can be imposed on large acyclic analytes. The new, fluorinated TAA gives access to crystal structures that were inaccessible thus far.

A Common C2 -Symmetric 2,2'-Biphenol Building Block and its Application in the Synthesis of (+)-di-epi-Gonytolide A.

A variety of biaryl polyketides exhibit remarkable bioactivities. However, their synthetic accessibility is often challenging. Herein, the enantioselective preparation and synthetic application of an axially chiral 2,2'-biphenol building block is outlined that represents a common motif of these intriguing natural products. Based on the highly regioselective and scalable bromination of a phenol precursor, a coupling process by Lipshutz cuprate oxidation was developed. A copper-mediated deracemization strategy proved to be superior to derivatization or kinetic resolution approaches. Key steps in the overall building block synthesis were rationalized through DFT studies. Utilizing the 2,2'-biphenol, a highly diastereoselective five step synthesis of formerly unknown (+)-di-epi-gonytolide A was developed, thus showcasing the building block's general potential for the synthesis of natural products and their derivatives. En route, the first enantioselective construction of a chromone dimer intermediate was established.

Neutral and Cationic Molybdenum Imido Alkylidene Cyclic Alkyl Amino Carbene (CAAC) Complexes for Olefin Metathesis.

The first neutral and cationic Mo imido alkylidene cyclic alkyl amino carbene (CAAC) complexes of the general formulae [Mo(N-Ar)(CHCMe2 Ph)(X)2 (CAAC)] and [Mo(N-Ar)(CHCMe2 Ph)(X)(CAAC)][B(ArF )4 ] (X=Br, Cl, OTf, OC6 F5 ; CAAC=1-(2,6-iPr2 -C6 H3 )-3,3,5,5-tetramethyltetrahydropyrrol-2-ylidene) have been synthesized from molybdenum imido bishalide alkylidene DME precursors. Different combinations of the imido and "X" ligands have been employed to understand synthetic peculiarities. Selected complexes have been characterized by single-crystal X-ray analysis. Due to the pronounced σ-donor/π-acceptor characteristics of CAACs, the corresponding neutral and cationic molybdenum imido alkylidene CAAC complexes do not require the presence of stabilizing donor ligands such as nitriles. Calculations on the PBE0-D3BJ/def2-TZVP level for PBE0-D3BJ/def2-SVP optimized geometries revealed partial charges at molybdenum similar to the corresponding molybdenum imido alkylidene N-heterocyclic carbene (NHC) complexes with a slightly higher polarization of the molybdenum alkylidene bond in the CAAC complexes. All cationic complexes have been tested in olefin metathesis reactions and showed improved activity compared to the analogous NHC complexes for hydrocarbon-based substrates, allowing for turnover numbers (TONs) up to 9500 even at room temperature. Some Mo imido alkylidene CAAC complexes are tolerant towards functional groups like thioethers and sulfonamides.

Enantioenriched Boron C,N-Chelates via Chirality Transfer.

Molecules stereogenic only at tetrahedral boron atoms show great promise for applications, for example as chiroptical materials, but are scarcely investigated due to their synthetic challenge. Hence, this study reports a two-step synthesis of enantioenriched boron C,N-chelates. First, the diastereoselective complexation of alkyl/aryl borinates with chiral aminoalcohols furnished boron stereogenic heterocycles in up to 86 % yield and d.r. >98 : 2. Treatment of these O,N-complexes with chelate nucleophiles was surmised to transfer the stereoinformation via the ate-complex into the C,N-products. This chirality transfer succeeded by substitution of the O,N-chelates with lithiated phenyl pyridine to give boron stereogenic C,N-chelates in up to 84 % yield and e.r. up to 97 : 3. The chiral aminoalcohol ligands could be recovered after isolation of the C,N-chelates. The chirality transfer tolerated alkyl, alkynyl and (hetero-)aryl moieties at boron and could be further extended by post-modification: transformations such as catalytic hydrogenations or sequential deprotonation/electrophilic trapping were feasible while maintaining the stereochemical integrity of the C,N-chelates. Structural aspects of the boron chelates were studied by variable temperature NMR and X-ray diffraction.

Tailoring liquid crystalline self-assembly and de Vries behavior of azulenes via lateral and core substitution.

The azulene moiety is a highly attractive building block in optoelectronic applications due to its unique properties. For high-performing devices, the molecular orientation is crucial and can be controlled through liquid-crystalline self-assembly. Recent work showed that liquid crystalline derivatives bearing the 2-phenyl-azulene-1-nitrile core formed broad de Vries-type SmA and SmC phases. For exact understanding of the structure-property relationship, a series of 2-(hetero)aryl-azulenes has been synthesized varying the chain linkage, the lateral substituent, and the aromatic ring. Small changes of the molecular structure determined whether the orthogonal SmA phase or the tilted SmC phase is predominant. Implementation of alkyne chains instead of alkoxy chains resulted in the reduction of phase transition temperatures and formation of mesophases at room temperature. Furthermore, de Vries-like behavior was investigated and reduction values between R = 0.35 and 0.74 were measured which supported the hypothesis that in this system de Vries-like behavior is caused by steric repulsion of the lateral substituent. The control of the phase geometry by the molecular structure might be used for improved molecular orientation in optoelectronic materials.

A Practical and Robust Zwitterionic Cooperative Lewis Acid/Acetate/Benzimidazolium Catalyst for Direct 1,4-Additions.

A catalyst type is disclosed allowing for exceptional efficiency in direct 1,4-additions. The catalyst is a zwitterionic entity, in which acetate binds to CuII , which is formally negatively charged and serving as counterion for benzimidazolium. All 3 functionalities are involved in the catalytic activation. For maleimides productivity was increased by a factor >300 compared to literature (TONs up to 6700). High stereoselectivity and productivity was attained for a broad range of other Michael acceptors as well. The polyfunctional catalyst is accessible in only 4 steps from N-Ph-benzimidazole with an overall yield of 96 % and robust during catalysis. This allowed to reuse the same catalyst multiple times with nearly constant efficiency. Mechanistic studies, in particular by DFT, give a detailed picture how the catalyst operates. The benzimidazolium unit stabilizes the coordinated enolate nucleophile and prevents that acetate/acetic acid dissociate from the catalyst.

Cooperative Lewis Acid-1,2,3-Triazolium-Aryloxide Catalysis: Pyrazolone Addition to Nitroolefins as Entry to Diaminoamides.

Pyrazolones represent an important structural motif in active pharmaceutical ingredients. Their asymmetric synthesis is thus widely studied. Still, a generally highly enantio- and diastereoselective 1,4-addition to nitroolefins providing products with adjacent stereocenters is elusive. In this article, a new polyfunctional CuII -1,2,3-triazolium-aryloxide catalyst is presented which enables this reaction type with high stereocontrol. DFT studies revealed that the triazolium stabilizes the transition state by hydrogen bonding between C(5)-H and the nitroolefin and verify a cooperative mode of activation. Moreover, they show that the catalyst adopts a rigid chiral cage/pore structure by intramolecular hydrogen bonding, by which stereocontrol is achieved. Control catalyst systems confirm the crucial role of the triazolium, aryloxide and CuII , requiring a sophisticated structural orchestration for high efficiency. The addition products were used to form pyrazolidinones by chemoselective C=N reduction. These heterocycles are shown to be valuable precursors toward ß,γ'-diaminoamides by chemoselective nitro and N-N bond reductions. Morphological profiling using the Cell painting assay identified biological activities for the pyrazolidinones and suggest modulation of DNA synthesis as a potential mode of action. One product showed biological similarity to Camptothecin, a lead structure for cancer therapy.

Joint Venture of Metal Cluster and Amphiphilic Cationic Minidendron Resulting in Near Infrared Emissive Lamellar Ionic Liquid Crystals.

Inorganic red-NIR emissive materials are particularly relevant in many fields like optoelectronic, bioimaging or solar cells. Benefiting from their emission in devices implies their integration in easy-to-handle materials like liquid crystals, whose long-range ordering and self-healing abilities could be exploited and influence emission. Herein, we present red-NIR emissive hybrid materials obtained with phosphorescent octahedral molybdenum cluster anions electrostatically associated with amphiphilic guanidinium minidendrons. Polarized optical microscopy and X-ray analysis show that while the minidendron chloride salts self-organize into columnar phases, their association with the dianionic metal cluster leads to layered phases. Steady-state and time-resolved emission investigations demonstrate the influence of the minidendron alkyl chain length on the phosphorescence of the metal cluster core.

Chasing Self-Assembly of Thioether-Substituted Flavylium Salts in Solution and Bulk State.

Two series of flavylium triflates carrying alkoxy side chains in the A-ring (benzo unit of chromylium salt) and thioethers in the B ring (phenyl unit) (On -Fla-Sm ) as well as thioethers at both A and B ring (Sn -Fla-Sm ) were synthesized in order to understand the effect of thioether functionalization on their self-assembly and electronic properties. Concentration-dependent and diffusion ordered (DOSY) NMR experiments of O1 -iV-Fla-S3 indicate the formation of columnar H-aggregates in solution with antiparallel intracolumnar stacking of the AC unit (chromylium) of the flavylium triflate, in agreement with the solid state structure of O1 -V-Fla-S1 . Thioether substitution on the B ring changes the linear optical properties in solution, whereas it has no effect on the A ring. According to differential scanning calorimetry, polarizing optical microscopy and X-ray diffraction bulk self-assembly of these ionic liquid crystals (ILCs) depends on the total number of side chains, yielding SmA and LamCol phases for ILCs with 2-3 chains and Colro , Colh phases for ILCs with 3-6 chains. Thus, we demonstrated that thioethers are a useful design tool for ILCs with tailored properties.

Enantioenriched γ-Aminoalcohols, ß-Amino Acids, ß-Lactams, and Azetidines Featuring Tetrasubstituted Fluorinated Stereocenters via Palladacycle-Catalyzed Asymmetric Fluorination of Isoxazolinones.

Enantiopure fluorine containing ß-amino acids are of large biological and pharmaceutical interest. Strategies to prepare ß-amino acid derivatives possessing a F-containing tetrasubstituted stereocenter at the α-C atom in a catalytic asymmetric sense are rare, in particular using an enantioselective electrophilic C-F bond formation. In the present study, a highly enantioselective palladacycle-catalyzed fluorination of isoxazolinones was developed. It is demonstrated that isoxazolinones are useful precursors toward enantiopure ß-amino acid derivatives by diastereo- and chemoselective reduction. The formed γ-aminoalcohols served as valuable precursors toward ß-amino acids, ß-amino acid esters, and ß-lactams, all featuring tetrasubstituted fluorinated stereocenters. In addition, by this work, enantioenriched fluorinated azetidines were accessible for the first time.

Flexible Approach for the Synthesis of Annulated 4H-Pyrans Based on a Cu(I)-Catalyzed C-Allylation/O-Vinylation Reaction of Cyclic 1-Bromoallyl Tosylates with Cyclic and Acyclic 1,3-Dicarbonyls.

The Cu(I)-catalyzed reaction between five-, six-, seven-, and eight-membered cyclic 1-bromoallyl tosylates and five- and six-membered cyclic 1,3-dicarbonyls in DMF at 80 °C using Cs2CO3 as a base and 2-picolinic acid as an additive selectively delivers a wide array of bisannulated 4H-pyrans in a single step with yields up to 92%. The transformations are considered to proceed as intermolecular C-allylations/intramolecular O-vinylations. With six-membered cyclic 1-bromoallyl tosylates and acyclic ß-ketoesters as substrates, the corresponding 5,6,7,8-tetrahydro-4H-chromene-3-carboxylates are obtained with yields up to 59%.

Comprehensive Picture of the Excited State Dynamics of Cu(I)- and Ru(II)-Based Photosensitizers with Long-Lived Triplet States.

Ru(II)- and Cu(I)-based photosensitizers featuring the recently developed biipo ligand (16H-benzo-[4',5']-isoquinolino-[2',1',:1,2]-imidazo-[4,5-f]-[1,10]-phenanthrolin-16-one) were comprehensively investigated by X-ray crystallography, electrochemistry, and especially several time-resolved spectroscopic methods covering all time scales from femto- to milliseconds. The analysis of the experimental results is supported by density functional theory (DFT) calculations. The biipo ligand consists of a coordinating 1,10-phenanthroline moiety fused with a 1,8-naphthalimide unit, which results in an extended π-system with an incorporated electron acceptor moiety. In a previous study, it was shown that this ligand enabled a Ru(II) complex that is an efficient singlet oxygen producer and of potential use for other light-driven applications due to its long emission lifetime. The goal of our here presented research is to provide a full spectroscopic picture of the processes that follow optical excitation. Interestingly, the Ru(II) and Cu(I) complexes differ in their characteristics even though the lowest electronically excited states involve in both cases the biipo ligand. The combined spectroscopic results indicate that an emissive 3MLCT state and a rather dark 3LC state are populated, each to some extent. For the Cu(I) complex, most of the excited population ends up in the 3LC state with an extraordinary lifetime of 439 µs in the solid state at 20 K, while a significant population of the 3MLCT state causes luminescence for the Ru(II) complex. Hence, there is a balance between these two states, which can be tuned by altering the metal center or even by thermal energy, as suggested by the temperature-dependent experiments.

Merging liquid crystalline self-assembly and linear optical properties of merocyanines via tailored donor units.

Aiming at merocyanine dyes with good linear optical and self-assembly properties, a series of rigid mono-, bi- and tricyclic merocyanines with O- and N-donor units as well as keto or malodinitrile acceptor units was prepared by a convergent approach. With particular focus on tailoring the donor unit, a selection of appropriate derivatives was investigated with respect to their dye properties in solution and in the bulk (UV/Vis, fluorescence, temperature-dependent fluorescence, lifetime). Determination of fluorescence quantum yields revealed the importance of the donor unit and the chromophore size. Larger chromophores and N-donors were beneficial for strong emission in solution, whereas small chromophores and O-donors favored emission in the solid state. To rationalize the different optical properties depending on their donor unit, density functional theory (DFT) calculations were performed. Liquid crystalline derivatives were additionally studied by optical polarization microscopy, differential scanning calorimetry, and X-ray diffraction experiments. For merocyanines with O-donor, fluorinated side chains were mandatory to get stable enantiotropic SmA phases regardless of chromophore size, side chain lengths or acceptor unit. Increased mesophase widths (up to 134 K) were observed upon increasing the chromophore lengths, chain lengths (up to C12) and F/C ratio in the side chain. On the other hand, merocyanines with N-donor and keto acceptor showed enantiotropic SmA phases in the presence of simple alkoxy side chains. The tricyclic merocyanine with N-donor shows an additional SmE phase at lower temperatures. The results revealed the importance of the donor unit to balance optical and mesomorphic properties in merocynanines.

Stereoretentive Regio- and Enantioselective Allylation of Isoxazolinones by a Planar Chiral Palladacycle Catalyst.

The catalytic allylic substitution is one of the most important tools in asymmetric synthesis to form C-C bonds in an enantioselective way. While high efficiency was previously accomplished in terms of enantio- and regiocontrol using different catalyst types, a strong general limitation is a very pronounced preference for the formation of allylic substitution products with (E)-configured C=C double bonds. Herein, we report that with a planar chiral palladacycle catalyst a diastereospecific reaction outcome is achieved using isoxazolinones and allylic imidates as substrates, thus maintaining the C=C double bond geometry of the allylic substrates in the highly enantioenriched products. DFT calculations show that the reactions proceed via an SN 2 mechanism and not via π-allyl Pd complexes. Crucial for the high control is the stabilization of the allylic fragment in the SN 2 transition state by π-interactions with the phenyl substituents of the pentaphenylferrocenyl catalyst core.

Direct Enantioselective Addition of Alkynes to Imines by a Highly Efficient Palladacycle Catalyst.

Enantiopure propargylic amines are highly valuable synthetic building blocks. Much effort has been devoted to develop methods for their preparation. The arguably most important strategy is the 1,2-addition of alkynes to imines. Despite remarkable progress, the known methods using Zn and Cu catalysts suffer from the need for high catalyst loadings, typically ranging from 2-60 mol % for neutral aldimine substrates. Here we report a planar chiral Pd complex acting as very efficient catalyst for direct asymmetric alkyne additions to imines, requiring very low catalyst loadings. Turnover numbers of up to 8700 were accomplished. Our investigation suggests that a Pd-acetylide complex is generated as a catalytically relevant intermediate by the aid of an acac ligand acting as internal catalytic base. It is shown that the catalyst is quite stable under the reaction conditions and that product inhibition is not an issue. A total of 39 examples is shown which all yielded almost enantiopure products.

Interplay of Polarity and Confinement in Asymmetric Catalysis with Chiral Rh Diene Complexes in Microemulsions.

Microemulsions provide a unique opportunity to tailor the polarity and liquid confinement in asymmetric catalysis via nanoscale polar and nonpolar domains separated by a surfactant film. For chiral diene Rh complexes, the influence of counterion and surfactant film on the catalytic activity and enantioselectivity remained elusive. To explore this issue chiral norbornadiene Rh(X) complexes (X=OTf, OTs, OAc, PO2 F2 ) were synthesized and characterized by X-ray crystallography and theoretical calculations. These complexes were used in Rh-catalyzed 1,2-additions of phenylboroxine to N-tosylimine in microemulsions stabilized either exclusively by n-octyl-ß-D-glucopyranoside (C8 G1 ) or a C8 G1 -film doped with anionic or cationic surfactants (AOT, SDS and DTAB). The Rh(OAc) complex showed the largest dependence on the composition of the microemulsion, yielding up to 59 % (90 %ee) for the surfactant film doped with 5 wt% of AOT as compared to 52 % (58 %ee) for neat C8 G1 at constant surfactant concentration. Larger domains, determined by SAXS analysis, enabled further increase in yield and selectivity while the reaction rate almost remained constant according to kinetic studies.

Rh(I)/(III)-N-Heterocyclic Carbene Complexes: Effect of Steric Confinement Upon Immobilization on Regio- and Stereoselectivity in the Hydrosilylation of Alkynes.

Rh(I) NHC and Rh(III) Cp* NHC complexes (Cp*=pentamethylcyclopentadienyl, NHC=N-heterocyclic carbene=pyrid-2-ylimidazol-2-ylidene (Py-Im), thiophen-2-ylimidazol-2-ylidene) are presented. Selected catalysts were selectively immobilized inside the mesopores of SBA-15 with average pore diameters of 5.0 and 6.2 nm. Together with their homogenous progenitors, the immobilized catalysts were used in the hydrosilylation of terminal alkynes. For aromatic alkynes, both the neutral and cationic Rh(I) complexes showed excellent reactivity with exclusive formation of the ß(E)-isomer. For aliphatic alkynes, however, selectivity of the Rh(I) complexes was low. By contrast, the neutral and cationic Rh(III) Cp* NHC complexes proved to be highly regio- and stereoselective catalysts, allowing for the formation of the thermodynamically less stable ß-(Z)-vinylsilane isomers at room temperature. Notably, the SBA-15 immobilized Rh(I) catalysts, in which the pore walls provide an additional confinement, showed excellent ß-(Z)-selectivity in the hydrosilylation of aliphatic alkynes, too. Also, in the case of 4-aminophenylacetylene, selective formation of the ß(Z)-isomer was observed with a neutral SBA-15 supported Rh(III) Cp* NHC complex but not with its homogenous counterpart. These are the first examples of high ß(Z)-selectivity in the hydrosilylation of alkynes by confinement generated upon immobilization inside mesoporous silica.

Cross-Coupled Phenyl- and Alkynyl-Based Phenanthrolines and Their Effect on the Photophysical and Electrochemical Properties of Heteroleptic Cu(I) Photosensitizers.

With the aims of increasing the antenna system and improving the photophysical properties of Cu(I)-based photosensitizers, the backbone of 2,9-dimethyl-1,10-phenanthroline was selectively extended in the 5,6-position. Applying specifically tailored Suzuki-Miyaura and "chemistry-on-the-complex" Sonogashira cross-coupling reactions enabled the development of two sets of structurally related diimine ligands with a broad variety of different phenyl- and alkynyl-based substituents. The resulting 11 novel heteroleptic Cu(I) complexes, including five solid-state structures, were studied with respect to their structure-property relationships. Both sets of substituents are able to red-shift the absorption maxima and to increase the absorptivity. For the alkynyl-based complexes, this is accompanied by a significant anodic shift of the reduction potentials. The phenyl-based substituents strongly influence the emission wavelength and quantum yield of the resulting Cu(I) complexes and lead to an increase in the emission lifetime of up to 504 ns, which clearly indicates competition with the benchmark system [(xantphos)Cu(bathocuproine)]PF6.

Cationic Group VI Metal Imido Alkylidene N-Heterocyclic Carbene Nitrile Complexes: Bench-Stable, Functional-Group-Tolerant Olefin Metathesis Catalysts.

Despite their excellent selectivities and activities, Mo-and W-based catalysts for olefin metathesis have not gained the same widespread use as Ru-based systems, mainly due to their inherent air sensitivity. Herein, we describe the synthesis of air-stable cationic-at-metal molybdenum and tungsten imido alkylidene NHC nitrile complexes. They catalyze olefin metathesis reactions of substrates containing functional groups such as (thio-) esters, (thio-) ethers and alcohols without the need for prior activation, for example, by a Lewis acid. The presence of a nitrile ligand was found to be essential for their stability towards air, while no decrease in activity and productivity could be observed upon coordination of a nitrile. Variations of the imido and anionic ligand revealed that alkoxide complexes with electron-withdrawing imido ligands offer the highest reactivities and excellent stability compared to analogous triflate and halide complexes.