RESUMEN
The aim of this project is to fabricate hydrogen-rich silicone doped with magnetic nanoparticles for use as a temperature change indicator in magnetic resonance imaging-guided (MRIg) thermal ablations. To avoid clustering, the particles of mixed MnZn ferrite were synthesized directly in a medical-grade silicone polymer solution. The particles were characterized by transmission electron microscopy, powder X-ray diffraction, soft X-ray absorption spectroscopy, vibrating sample magnetometry, temperature-dependent nuclear magnetic resonance relaxometry (20 °C to 60 °C, at 3.0 T), and magnetic resonance imaging (at 3.0 T). Synthesized nanoparticles were the size of 4.4 nm ± 2.1 nm and exhibited superparamagnetic behavior. Bulk silicone material showed a good shape stability within the study's temperature range. Embedded nanoparticles did not influence spin-lattice relaxation, but they shorten the longer component of spin-spin nuclear relaxation times of silicone's protons. However, these protons exhibited an extremely high r2* relaxivity (above 1200 L s-1 mmol-1) due to the presence of particles, with a moderate decrease in the magnetization with temperature. With an increased temperature decrease of r2*, this ferro-silicone can be potentially used as a temperature indicator in high-temperature MRIg ablations (40 °C to 60 °C).
Asunto(s)
Manganeso , Nanopartículas , Protones , Imagen por Resonancia Magnética/métodos , Nanopartículas/química , Zinc/químicaRESUMEN
Mixed manganese-zinc ferrite nanoparticles coated with PEG were studied for their potential usefulness in MRI thermometry as temperature-sensitive contrast agents. Particles in the form of an 8.5 nm core coated with a 3.5 nm layer of PEG were fabricated using a newly developed, one-step method. The composition of Mn0.48Zn0.46Fe2.06O4 was found to have a strong thermal dependence of magnetization in the temperature range between 5 and 50 °C. Nanoparticles suspended in an agar gel mimicking animal tissue and showing non-significant impact on cell viability in the biological test were studied with NMR and MRI over the same temperature range. For the concentration of 0.017 mg/mL of Fe, the spin-spin relaxation time T2 increased from 3.1 to 8.3 ms, while longitudinal relaxation time T1 shows a moderate decrease from 149.0 to 125.1 ms. A temperature map of the phantom exposed to the radial temperature gradient obtained by heating it with an 808 nm laser was calculated from T2 weighted spin-echo differential MR images. Analysis of temperature maps yields thermal/spatial resolution of 3.2 °C at the distance of 2.9 mm. The experimental relaxation rate R2 data of water protons were compared with those obtained from calculations using a theoretical model incorporating the motion averaging regime.
Asunto(s)
Medios de Contraste , Nanopartículas , Animales , Temperatura , Medios de Contraste/química , Imagen por Resonancia Magnética/métodos , Agua , Nanopartículas/químicaRESUMEN
High stocking densities, closed animal houses, and elevated concentrations of bacteria, fungi, and the products of their activity, including ammonia and hydrogen sulphide, have adverse health effects. Active techniques used to reduce unfavourable environmental conditions, such as ventilation, sprinkling, bedding sorbents, and nutritional treatments, are not always sufficient to improve the animals' living environment. The current paper aims to evaluate the effect of radiant catalytic ionization (RCI) on airborne microorganisms, cage microbiological status, gaseous ammonia concentrations, and the haematological status of mice in animal houses. After one week of operation of an RCI system, the number of airborne bacteria and fungi in the experimental room decreased in comparison to the first day of the experiment (p < 0.05 and p < 0.05 respectively), as did the concentrations of ammonia (p < 0.01) and dust. At the same time, the basic health parameters of the mice, determined in the blood, were very similar between the control and experimental room. RCI seems to be an ideal solution to ensure high hygiene standards in animal rooms and houses with limited use of disinfectants or antibiotic treatment of sick animals. An additional, environmental benefit is the limited amount of nitrogen released.
Asunto(s)
Amoníaco , Roedores , Alérgenos , Amoníaco/análisis , Animales , Bacterias , Polvo/análisis , Hongos , Vivienda para Animales , Ratones , VentilaciónRESUMEN
Some misfolded proteins, e.g., immunoglobulin monoclonal free light chains (FLC), tend to form fibrils. Protein deposits in tissue may lead to amyloidosis and dysfunction of different organs. There is currently no technique allowing for the identification of FLC that are prone to aggregate. The development of such a method would enable the early selection of patients at high risk of developing amyloidosis. The aim of this study was to investigate whether silver nanoparticles (AgNPs) could be a useful tool to study the process of aggregation of FLC and their susceptibility to form the protein deposits. Mixtures of AgNPs and urine samples from patients with multiple myeloma were prepared. To evaluate the aggregation process of nanoparticles coated with proteins, UV-visible spectroscopy, transmission electron microscopy, and the original laser light scattering method were used. It has been shown that some clones of FLC spontaneously triggered aggregation of the nanoparticles, while in the presence of others, the nanoparticle solution became hyperstable. This is probably due to the structure of the chains themselves, unique protein-AgNPs interactions and perhaps correlates with the tendency of some FLC clones to form deposits. Nanoparticle technology has proven to be helpful in identifying clones of immunoglobulin FLC that tend to aggregate.
Asunto(s)
Anticuerpos Monoclonales/química , Cadenas Ligeras de Inmunoglobulina/sangre , Cadenas kappa de Inmunoglobulina/sangre , Cadenas lambda de Inmunoglobulina/sangre , Nanopartículas del Metal/química , Mieloma Múltiple/sangre , Mieloma Múltiple/inmunología , Plata/química , Amiloidosis/metabolismo , Humanos , Cadenas Ligeras de Inmunoglobulina/química , Cadenas kappa de Inmunoglobulina/química , Cadenas lambda de Inmunoglobulina/química , Pruebas Inmunológicas , Rayos Láser , Luz , Microscopía Electrónica de Transmisión , Nanomedicina , Pliegue de Proteína , Dispersión de RadiaciónRESUMEN
TNF-related apoptosis-inducing ligand (TRAIL) is a type II transmembrane protein capable of selectively inducing apoptosis in cancer cells by binding to its cognate receptors. Here, we examined the anticancer efficacy of a recently developed chimeric AD-O51.4 protein, a TRAIL fused to the VEGFA-originating peptide. We tested AD-O51.4 protein activity against human colorectal cancer (CRC) models and investigated the resistance mechanism in the non-responsive CRC models. The quantitative comparison of apoptotic activity between AD-O51.4 and the native TRAIL in nine human colorectal cancer cell lines revealed dose-dependent toxicity in seven of them; the immunofluorescence-captured receptor abundance correlated with the extent of apoptosis. AD-O51.4 reduced the growth of CRC patient-derived xenografts (PDXs) with good efficacy. Cell lines that acquired AD-O51.4 resistance showed a significant decrease in surface TRAIL receptor expression and apoptosis-related proteins, including Caspase-8, HSP60, and p53. These results demonstrate the effectiveness of AD-O51.4 protein in CRC preclinical models and identify the potential mechanism underlying acquired resistance. Progression of AD-O51.4 to clinical trials is expected.
Asunto(s)
Antineoplásicos/farmacología , Resistencia a Antineoplásicos/efectos de los fármacos , Proteínas Recombinantes de Fusión/farmacología , Ligando Inductor de Apoptosis Relacionado con TNF/metabolismo , Factor A de Crecimiento Endotelial Vascular/metabolismo , Animales , Apoptosis/efectos de los fármacos , Proteínas Reguladoras de la Apoptosis/genética , Proteínas Reguladoras de la Apoptosis/metabolismo , Línea Celular Tumoral , Membrana Celular/metabolismo , Modelos Animales de Enfermedad , Relación Dosis-Respuesta a Droga , Humanos , Ratones , Receptores del Ligando Inductor de Apoptosis Relacionado con TNF/metabolismo , Ligando Inductor de Apoptosis Relacionado con TNF/química , Ligando Inductor de Apoptosis Relacionado con TNF/genética , Factor A de Crecimiento Endotelial Vascular/química , Factor A de Crecimiento Endotelial Vascular/genética , Ensayos Antitumor por Modelo de XenoinjertoRESUMEN
The mitochondrial amidoxime-reducing component (MARC) is a mammalian molybdenum-containing enzyme. All annotated mammalian genomes harbor two MARC genes, MARC1 and MARC2, which share a high degree of sequence similarity. Both molybdoenzymes reduce a variety of N-hydroxylated compounds. Besides their role in N-reductive drug metabolism, only little is known about their physiological functions. In this study, we characterized an existing KO mouse model lacking the functional MARC2 gene and fed a high-fat diet and also performed in vivo and in vitro experiments to characterize reductase activity toward known MARC substrates. MARC2 KO significantly decreased reductase activity toward several N-oxygenated substrates, and for typical MARC substrates, only small residual reductive activity was still detectable in MARC2 KO mice. The residual detected reductase activity in MARC2 KO mice could be explained by MARC1 expression that was hardly unaffected by KO, and we found no evidence of significant activity of other reductase enzymes. These results clearly indicate that MARC2 is mainly responsible for N-reductive biotransformation in mice. Striking phenotypical features of MARC2 KO mice were lower body weight, increased body temperature, decreased levels of total cholesterol, and increased glucose levels, supporting previous findings that MARC2 affects energy pathways. Of note, the MARC2 KO mice were resistant to high-fat diet-induced obesity. We propose that the MARC2 KO mouse model could be a powerful tool for predicting MARC-mediated drug metabolism and further investigating MARC's roles in energy homeostasis.
Asunto(s)
Metabolismo Energético , Proteínas Mitocondriales/metabolismo , Obesidad/metabolismo , Animales , Dieta Alta en Grasa/efectos adversos , Femenino , Ratones , Ratones Endogámicos C57BL , Ratones Noqueados , Proteínas Mitocondriales/genética , Obesidad/etiología , Obesidad/genética , Oxidación-ReducciónRESUMEN
The presented research is focused on the synthesis of alloyed Ag-In-Zn-S colloidal nanocrystals from a mixture of simple metal precursors such as AgNO3, InCl3, zinc stearate combined with 1-dodecanethiol (DDT), 1-octadecene (ODE), and sulfur dissolved in oleylamine (OLA). In particular, the focus is on the effect of the solvent (ODE vs 1,2-dichlorobenzene (DCB)) and the type of sulfur precursor (S/OLA vs S/ n-octylamine (OCA)) on the metal precursors reactivates and on the chemical composition, crystal structure, and luminescent properties of the resulting nanocrystals. The replacement of ODE by DCB as a solvent lowers the reactivity of metal precursors and results in a 3-fold decrease of the photoluminescence quantum yields (Q.Y.) values (from 67% to 21%). This negative effect can be fully compensated by the use of S/OCA as a source of sulfur instead of S/OLA (Q.Y. increases from 21% to 64%). NMR studies of the isolated organic phase indicate that the S/OLA precursor generates two types of ligands being products of ( Z)-1-amino-9-octadecene (OLA) hydrogenation. These are "surface bound" 1-aminooctadecane (C18H37NH2) and crystal bound, i.e., alkyl chain covalently bound to the nanocrystal surface via surfacial sulfur (C18H37-NH-S crystal). Highly luminescent Ag-In-Zn-S nanocrystals exhibit a cation-enriched (predominantly indium) surface and are stabilized by a 1-aminooctadecane ligand, which shows more flexibility than OLA. These investigations were completed by hydrophilization of nanocrystals obtained via exchange of the primary ligands for 11-mercaptoundecanoic acid, (MUA) with only a 2-fold decrease of photoluminescence Q.Y. in the most successful case (from 67% to 31%). Finally, through ligand exchange, an electroactive inorganic/organic hybrid was obtained, namely, Ag-In-Zn-S/7-octyloxyphenazine-2-thiol, in which its organic part fully retained its electrochemical activity.
RESUMEN
A broad spectrum of applications of magnetic nanoparticles leads to the need for the precise tuning of their magnetic properties. In this study, a series of magnetite and zinc-ferrite nanoparticles were successfully prepared by modified high-temperature synthesis in a controlled gas atmosphere. Nanoparticles with different zinc to iron ratios and pure Fe3O4 were obtained. The structure of the nanoparticles was studied by transmission electron microscopy and Mössbauer spectroscopy. These revealed the single domain character of the nanoparticles and the influence of the synthesis temperature and zinc to iron ratio on their shape and size. Chemical structure was characterized by inductively coupled plasma optical emission spectroscopy, energy dispersive X-ray spectroscopy and thermogravimetric analysis. X-ray photoelectron spectroscopy coupled with an argon gas cluster ion beam (Ar-GCIB) allowed the study of subsequent layers of the nanoparticles without altering their chemical structure. This revealed the presence of a carbon layer on all nanoparticles consisting of capping agents used in the synthesis and revealed the core-shell character of the zinc ferrite particles. In addition, different types of zinc infusions in the nanoparticle structure were observed when using different Zn/Fe ratios. Finally, magnetic studies performed by means of vibrating sample magnetometry proved the superparamagnetic behavior of all the samples.
RESUMEN
The growing demand for clean energy catalyzes the development of new devices capable of generating electricity from renewable energy resources. One of the possible approaches focuses on the use of thermoelectric materials (TE), which may utilize waste heat, water, and solar thermal energy to generate electrical power. An improvement of the performance of such devices may be achieved through the development of composites made of an organic matrix filled with nanostructured thermoelectric materials working in a synergetic way. The first step towards such designs requires a better understanding of the fundamental interactions between available materials. In this paper, this matter is investigated and the questions regarding the change of electrical and thermal properties of nanocomposites based on low-conductive polypyrrole enriched with bismuth nanowires of well-defined geometry and morphology is answered. It is clearly demonstrated that the electrical conductivity and the Seebeck coefficient may be tuned either simultaneously or separately within particular Bi NWs content ranges, and that both parameters may be increased at the same time.
RESUMEN
Titanium dioxide nanocomposites were synthesized in hierarchical architectures through the use of a 1,4-dihydroxyanthraquinone photosensitizer. In the first step, the dye was either incorporated into the TiO2 core or adsorbed on its surface. In the subsequent phase, both structures were covered with an outer layer of titanium dioxide. The structure, morphology, aggregation, spectroscopic, and electrochemical properties of the synthesized TiO2 -based materials are presented with emphasis on the photosensitization and the photocurrent switching phenomena, which are also discussed within the context of the optical logic gates implementation and fuzzy logic systems operation. We present three different interpretations of the photocurrent action spectra yielding binary, ternary, or fuzzy logic circuits.
RESUMEN
In urbanized areas, extracellular DNA (exDNA) is suspected of carrying genes with undesirable traits like virulence genes (VGs) or antibiotic resistance genes (ARGs), which can spread through horizontal gene transfer (HGT). Hence, it is crucial to develop novel approaches for the mitigation of exDNA in the environment. Our research explores the role of goethite, a common iron mineral with high adsorption capabilities, in exDNA adsorption processes. We compare well-crystalline, semi-crystalline, and nano goethites with varying particle sizes to achieve various specific surface areas (SSAs) (18.7-161.6 m2/g) and porosities. We conducted batch adsorption experiments using DNA molecules of varying chain lengths (DNA sizes: <11 Kb, <6 Kb, and <3 Kb) and assessed the impact of Ca2+ and biomacromolecules on the adsorption efficacy and mechanisms. Results show that porosity and pore structure significantly influence DNA adsorption capacity. Goethite with well-developed meso- and macroporosity demonstrated enhanced DNA adsorption. The accumulation of DNA on the goethite interface led to substantial aggregation in the system, thus the formation of DNA-goethite conjugates, indicating the bridging between mineral particles. DNA chain length, the presence of Ca2+, and the biomacromolecule matrix also affected the adsorption capacity and mechanism. Interactions between DNA and positively charged biomacromolecules or Ca2+ led to DNA compaction, allowing greater DNA accumulation in pores. However, a high concentration of biomacromolecules led to the saturation of the goethite surface, inhibiting DNA adsorption. AFM imaging of goethite particles after adsorption suggested the formation of the DNA multilayer. The study advances understanding of the environmental behavior of exDNA and its interaction with iron oxyhydroxides, offering insights into developing more effective methods for ARGs removal in wastewater treatment plants. By manipulating the textural properties of goethite, it's possible to enhance exDNA removal, potentially reducing the spread of biocontamination in urban and industrial environments.
Asunto(s)
ADN , Compuestos de Hierro , Minerales , Compuestos de Hierro/química , Adsorción , Minerales/química , ADN/química , Porosidad , Tamaño de la PartículaRESUMEN
This study focuses on the adsorption process of L-cysteine (Cys), a sulfur-containing amino acid, onto monolayers of gold nanoparticles (AuNPs) prepared through distinct protocols on mica substrates. Two types of AuNPs were prepared using two different methods: the first employed a physical approach, which combined the Inert Gas Condensation (IGC) technique with the magnetron sputtering method, while the second utilized a chemical method involving the reduction of tetrachloroauric acid with trisodium citrate (TC). The characterization of AuNPs was performed using transmission electron microscopy (TEM) and atomic force microscopy (AFM), of up to 5 ± 1.3 nm for bare AuNPs obtained through vacuum techniques, and up to 12 ± 5 nm for negatively charged, citrate-stabilized TCAuNPs(-). The application of spectroscopic techniques based on the surface-enhanced effects allows for describing the adsorption process in both micro- and nanoscale systems: Cys/bare AuNPs and Cys/ TCAuNPs(-). The commonly used surface-enhanced Raman spectroscopy (SERS) technique provided insights into adsorption behaviours at the microscale level. In the case of TCAuNPs(-), an interaction involving the lone electron pair of sulfur (S) atom and metal surface, while on the bare AuNPs, S is adsorbed on the surface, but the cleavage of the SH group is not discernible. Nanoscale analysis was complemented using AFM combined with the surface-enhanced infrared absorption spectroscopy (AFM-SEIRA) technique. AFM-SEIRA map indicated the formation of hot spot which were predominantly located between aggregated TCAuNPs(-) and on specific NPs surfaces (area between NPs and gold-coated tip). Results from the SERS and AFM-SEIRA techniques were in good agreement, underscoring the comprehensive understanding achieved through the chosen experimental approach regarding the Cys interactions with layers of AuNPs.
RESUMEN
Both chronic stress conditions and hyperergic reaction to environmental stress are known to enhance cancer susceptibility. We described two mouse lines that displayed high (HA) and low (LA) swim stress-induced analgesia (SSIA) to investigate the relationship between inherited differences in sensitivity to stress and proneness to an increased growth rate of subcutaneously inoculated melanoma. These lines display several genetic and physiological differences, among which distinct sensitivity to mutagens and susceptibility to cancer are especially noticeable. High analgesic mice display high proneness both to stress and a rapid local spread of B16F0 melanoma. However, stress-resistant LA mice do not develop melanoma tumors after inoculation, or if so, tumors regress spontaneously. We found that the chronic mild stress (CMS) procedure leads to enhanced interlinear differences in melanoma susceptibility. Tumors developed faster in stress conditions in both lines. However, LA mice still displayed a tendency for spontaneous regression, and 50% of LA mice did not develop a tumor, even under stressed conditions. Moreover, we showed that chronic stress, but not tumor progression, induces depressive behavior, which may be an important clue in cancer therapy. Our results clearly indicate how the interaction between genetic susceptibility to stress and environmental stress determine the risk and progression of melanoma. To our knowledge, HA/LA mouse lines are the first animal models of distinct melanoma progression mediated by inherited differences in stress reactivity.
Asunto(s)
Analgesia , Predisposición Genética a la Enfermedad , Hiperalgesia/fisiopatología , Melanoma Experimental/genética , Estrés Fisiológico/genética , Animales , Peso Corporal , Depresión/etiología , Progresión de la Enfermedad , Ingestión de Alimentos , Suspensión Trasera , Masculino , Melanoma Experimental/patología , Ratones , Leche , Trasplante de Neoplasias , Nocicepción/fisiología , Dolor/genética , NataciónRESUMEN
To construct their shells, molluscs are able to produce a large array of calcified materials including granular, prismatic, lamellar, fibrous, foliated, and plywood-like microstructures. The latter includes an aragonitic (the crossed-lamellar) and a calcitic (the crossed-foliated) variety, whose modes of formation are particularly enigmatic. We studied the crossed-foliated calcitic layers secreted solely by members of the limpet family Patellidae using scanning and transmission electron microscopy and electron backscatter diffraction. From the exterior to the interior, the material becomes progressively organized into commarginal first-order lamellae, with second and third order lamellae dipping in opposite directions in alternating lamellae. At the same time, the crystallographic texture becomes stronger because each set of the first order lamellae develops a particular orientation for the c-axis, while both sets maintain common orientations for one {104} face (parallel to the growth surface) and one a-axis (perpendicular to the planes of the first order lamellae). Each first order lamella shows a progressive migration of its crystallographic axes with growth in order to adapt to the orientation of the set of first order lamellae to which it belongs. To explain the progressive organization of the material, we hypothesize that a secretional zebra pattern, mirrored by the first order lamellae on the shell growth surface, is developed on the shell-secreting mantle surface. Cells belonging to alternating stripes behave differently to determine the growth orientation of the laths composing the first order lamellae. In this way, we provide an explanation as to how plywood-like materials can be fabricated, which is based mainly on the activity of mantle cells.
Asunto(s)
Carbonato de Calcio , Microscopía Electrónica de Rastreo , Carbonato de Calcio/químicaRESUMEN
The presence of pesticides in our environment is a consequence of intensive industrial and civilizational development, necessitating the search for effective and safe methods to remove them. We suggest utilizing zeolite X and a zeolite-carbon composite, obtained through the chemical transformation of fly ash, as pesticide sorbents. To increase the sorption efficiency of 2,4-dichlorophenoxyacetic acid (2,4-D), 2-methyl-4-chlorophenoxyacetic acid (MCPA), carbendazim, and simazine, we functionalized the zeolite materials with cationic (hexadecyltrimethylammonium) and nonionic (Triton X-100) surfactants. We used transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), thermogravimetric/differential thermal analysis (TG/DTA) and point of zero charge (pHpzc) analysis to characterize the functionalized sorbent materials. Our results indicate that cationic surfactants significantly enhance the adsorption of 2,4-D and MCPA. In contrast, carbendazim and simazine exhibit maximum sorption on the unmodified zeolite-carbon composite. The sorption mechanism is intricate, with physical sorption predominating, primarily due to electrostatic interactions between the protonated binding sites of the adsorbents and the negatively charged pesticide molecules. Regeneration tests demonstrated that ethanol is the most effective in regenerating zeolite-carbon composite with adsorbed MCPA and 2,4-D, while thermal regeneration was not possible. Adsorbents with simazine and carbendazim can be regenerated using both thermal and ethanol methods, but the thermal regeneration of zeolite with adsorbed simazine is more efficient. Utilizing functionalized zeolite materials obtained from industrial waste, such as fly ash, could provide an efficient way to remove pesticides from the environment.
RESUMEN
Polyvinylpyrrolidone (PVP) can be used to produce upconversion nanoparticles (UCNPs) in an advantageous manner, i.e. at modest temperatures in open-to-air conditions with simple hotplate and flask apparatus. However, the influence of PVP parameters on the formation of UCNPs has not been previously investigated. In this exploratory study, we establish that PVP molecular weight and relative amount of PVP can greatly influence the morphology and diameter of NaYF4:Yb,Er UCNPs produced via the PVP-assisted route. At nominal amounts of PVP, varying the molecular weight of PVP in synthesis between 10,000 g mol-1(PVP10), 40,000 g mol-1(PVP40), and 55,000 g mol-1(PVP55), had minimal effect on UCNP morphology, whereas reducing the quantity of PVP10 and PVP40 in the reaction to 10% of the nominal amount resulted in two notable effects: (1) the generation of a greater range of UCNP diameters and (2) the production of an unexpected sub-population of rhombus-shaped UCNPs. Bulk and individual nanoparticle analysis indicates that all UCNP morphologies were cubic (α-phase) crystal structure and consisted of NaYF4:Yb,Er. Optical emission properties exhibited only modest green and red luminescence emission ratio when PVP parameters were varied. However, separately produced PVP40 NaYF4:Yb,Tm UCNPs exhibited a much more intense and dual-band blue/red emission. This exploratory work demonstrates that tailoring PVP content in synthesis of UCNPs can greatly alter morphology of UCNPs produced and should be carefully considered in experimental design. However, the underlying mechanisms of action of the role PVP plays in this synthesis remain unclear. Ultimately, significant further work is still required to fully elucidate the relevant chemistry to achieve full control of PVP-UCNP synthesis.
RESUMEN
Well-organized, spherical, mesoporous hollow @CuMgAl-LDHs (layered double hydroxides) are prepared by the controlled removal of the SiO2 from SiO2@CuMgAl-LDH core-shell hybrids that in turn are synthesized via a bottom-up strategy. The materials are prepared with various Cu/Mg molar ratios (Cu/Mg = 0.05-0.50) while keeping the ratio of Cu and Mg constant, (Cu + Mg)/Al = 2. The effect of Cu doping and the silica core removal process (conducted for 4 h at 30 °C using 1 M NaOH) on the chemical composition, morphology, structure, texture and reducibility of the resulting materials are described. @CuMgAl-MOs (mixed oxides) obtained by thermal treatment of the @CuMgAl-LDHs are active and selective catalysts for the selective catalytic reduction of NOx using ammonia, and effectively operate at low temperatures. The N2 yield increases with increased Cu content in the CuMgAl shell, which is associated with the easier reducibility of the Cu species incorporated into the MgAl matrix. @CuMgAl-MOs show better catalytic performance than bulk CuMgAl MOs.
RESUMEN
Tissue engineering is a burgeoning field focused on repairing damaged tissues through the combination of bodily cells with highly porous scaffold biomaterials, which serve as templates for tissue regeneration, thus facilitating the growth of new tissue. Carbon materials, constituting an emerging class of superior materials, are currently experiencing remarkable scientific and technological advancements. Consequently, the development of novel 3D carbon-based composite materials has become significant for biomedicine. There is an urgent need for the development of hybrids that will combine the unique bioactivity of ceramics with the performance of carbonaceous materials. Considering these requirements, herein, we propose a straightforward method of producing a 3D carbon-based scaffold that resembles the structural features of spongin, even on the nanometric level of their hierarchical organization. The modification of spongin with calcium phosphate was achieved in a deep eutectic solvent (choline chloride : urea, 1 : 2). The holistic characterization of the scaffolds confirms their remarkable structural features (i.e., porosity, connectivity), along with the biocompatibility of α-tricalcium phosphate (α-TCP), rendering them a promising candidate for stem cell-based tissue-engineering. Culturing human bone marrow mesenchymal stem cells (hMSC) on the surface of the biomimetic scaffold further verifies its growth-facilitating properties, promoting the differentiation of these cells in the osteogenesis direction. ALP activity was significantly higher in osteogenic medium compared to proliferation, indicating the differentiation of hMSC towards osteoblasts. However, no significant difference between C and C-αTCP in the same medium type was observed.
RESUMEN
We report the results of mitochondrial and nuclear DNA analyses of skeletal remains exhumed in 2005 at Frombork Cathedral in Poland, that are thought to be those of Nicolaus Copernicus (1473-1543). The analyzed bone remains were found close to the altar Nicolaus Copernicus was responsible for during his tenure as priest. The mitochondrial DNA (mtDNA) profiles from 3 upper molars and the femurs were identical, suggesting that the remains originate from the same individual. Identical mtDNA profiles were also determined in 2 hairs discovered in a calendar now exhibited at Museum Gustavianum in Uppsala, Sweden. This calendar was the property of Nicolaus Copernicus for much of his life. These findings, together with anthropological data, support the identification of the human remains found in Frombork Cathedral as those of Nicolaus Copernicus. Up-to-now the particular mtDNA haplotype has been observed only 3 times in Germany and once in Denmark. Moreover, Y-chromosomal and autosomal short tandem repeat markers were analyzed in one of the tooth samples, that was much better preserved than other parts of the skeleton. Molecular sex determination revealed that the skeleton is from a male individual, and this result is consistent with morphological investigations. The minimal Y-chromosomal haplotype determined in the putative remains of Nicolaus Copernicus has been observed previously in many countries, including Austria, Germany, Poland, and the Czech Republic. Finally, an analysis of the SNP located in the HERC2 gene revealed the C/C genotype that is predominant in blue-eyed humans, suggesting that Copernicus may have had a light iris color.