Solar-Powered Gram-Scale Ammonia Production from Nitrate.

The photoelectrochemical (PEC) method has the potential to be an attractive route for converting and storing solar energy as chemical bonds. In this study, a maximum NH3 production yield of 1.01 g L-1 with a solar-to-ammonia conversion efficiency of 8.17% through the photovoltaic electrocatalytic (PV-EC) nitrate (NO3 -) reduction reaction (NO3 -RR) is achieved, using silicon heterojunction solar cell technology. Additionally, the effect of tuning the operation potential of the PV-EC system and its influence on product selectivity are systematically investigated. By using this unique external resistance tuning approach in the PV-EC system, ammonia production through nitrate reduction performance from 96 to 360 mg L-1 is enhanced, a four-fold increase. Furthermore, the NH3 is extracted as NH4Cl powder using acid stripping, which is essential for storing chemical energy. This work demonstrates the possibility of tuning product selectivity in PV-EC systems, with prospects toward pilot scale on value-added product synthesis.

Vapor condensation with daytime radiative cooling.

A radiative vapor condenser sheds heat in the form of infrared radiation and cools itself to below the ambient air temperature to produce liquid water from vapor. This effect has been known for centuries, and is exploited by some insects to survive in dry deserts. Humans have also been using radiative condensation for dew collection. However, all existing radiative vapor condensers must operate during the nighttime. Here, we develop daytime radiative condensers that continue to operate 24 h a day. These daytime radiative condensers can produce water from vapor under direct sunlight, without active consumption of energy. Combined with traditional passive cooling via convection and conduction, radiative cooling can substantially increase the performance of passive vapor condensation, which can be used for passive water extraction and purification technologies.

Superhydrophobic 3D-Assembled Metallic Nanoparticles for Trace Chemical Enrichment in SERS Sensing.

The performance of surface-enhanced Raman spectroscopy (SERS) is determined by the interaction between highly diluted analytes and boosted localized electromagnetic fields in nanovolumes. Although superhydrophobic surfaces are developed for analyte enrichment, i.e., to concentrate and transfer analytes toward a specific position, it is still challenging to realize reproducible, uniform, and sensitive superhydrophobic SERS substrates over large scales, representing a major barrier for practical sensing applications. To overcome this challenge, a superhydrophobic SERS chip that combines 3D-assembled gold nanoparticles on nanoporous substrates is proposed, for a strong localized field, with superhydrophobic surface treatment for analyte enrichment. Intriguingly, by concentrating droplets in the volume of 40 µL, the sensitivity of 1 nm is demonstrated using 1,2-bis(4-pyridyl)-ethylene molecules. In addition, this unique chip demonstrates a relative standard deviation (RSD) of 2.2% in chip-to-chip reproducibility for detection of fentanyl at 1 µg mL-1 concentration, revealing its potential for quantitative sensing of chemicals and drugs. Furthermore, the trace analysis of fentanyl and fentanyl-heroin mixture in human saliva is realized after a simple pretreatment process. This superhydrophobic chip paves the way toward on-site and real-time drug sensing to tackle many societal issues like drug abuse and the opioid crisis.

Circulating exosomal CPNE3 as a diagnostic and prognostic biomarker for colorectal cancer.

Exosomal proteins are emerging as relevant diagnostic and prognostic biomarkers for cancer. This study was aimed at illustrating the clinical significance of exosomal Copine III (CPNE3) purified from the plasma of colorectal cancer (CRC) patients. The CPNE3 expression levels in CRC tissues were analyzed by real-time PCR, western blot, and immunohistochemistry. Plasma exosomes were isolated to examine the CPNE3 level using ELISA. Pearson's correlation analysis was performed to investigate the CPNE3 levels between CRC tissues and matched plasma samples. Receiver operating characteristic curve analysis was developed to measure the diagnostic performance of exosomal CPNE3. The Kaplan-Meier method and Cox's proportional hazards model were utilized to determine statistical differences in survival times. CPNE3 showed increased expressions in the CRC tissues. A moderately significant correlation was found between CPNE3 expression in CRC tissues by immunohistochemistry and matched serum exosomal CPNE3 expression by ELISA (r = 0.645,(r = 0.645, p < 0.001). < 0.001). Exosomal CPNE3 yielded a sensitivity of 67.5% and a specificity of 84.4% in CRC at the cutoff value of 0.143 pg per 1ug1 ug exosome. Combined data from carcinoembryonic antigen and exosomal CPNE3 achieved 84.8% sensitivity and 81.2% specificity as a diagnostic tool. CRC patients with lower exosomal CPNE3 levels had substantially better disease-free survival (hazard ratio [HR], 2.9; 95% confidence interval [CI]: 1.3-6.4; p = 0.009) = 0.009) and overall survival (HR, 3.4; 95% CI: 1.2-9.9; p = 0.026) = 0.026) compared with those with higher exosomal CPNE3 levels. Exosomal CPNE3 show potential implications in CRC diagnosis and prognosis.

Generation of a Nondiffracting Superchiral Optical Needle for Circular Dichroism Imaging of Sparse Subdiffraction Objects.

Chirality describes not only the structural property of three-dimensional objects, but also an intrinsic feature of electromagnetic fields. Here we report a strategy to realize a Bessel beam superchiral "needle" by focusing a twisted radially polarized beam on a planar dielectric interface. By tailoring the light spatial distribution in the pupil plane of a high numerical aperture lens, the chirality of the local field at the focus can be enhanced by 11.9-fold than that of a circular polarized beam. Through a combined interaction of chiral and achiral transitions, the dimension of the region with enhanced chiral sensitivity can be shrunk down to λ/25. This theoretical work paves the way towards a completely new label-free imaging technique using the enhanced circular dichroism for sparse subdiffraction chiral objects (e.g., individual molecules).

Plasmonic Interferometer Array Biochip as a New Mobile Medical Device for Cancer Detection.

We report a plasmonic interferometer array (PIA) sensor and demonstrate its ability to detect circulating exosomal proteins in real-time with high sensitivity and low cost to enable the early detection of cancer. Specifically, a surface plasmon wave launched by the nano-groove rings interferes with the free-space light at the output of central nano-aperture and results in an intensity interference pattern. Under the single-wavelength illumination, when the target exosomal proteins are captured by antibodies bound on the surface, the biomediated change in the refractive index between the central aperture and groove rings causes the intensity change in transmitted light. By recording the intensity changes in real-time, one can effectively screen biomolecular binding events and analyze the binding kinetics. By integrating signals from multiple sensor pairs to enhance the signal-to-noise ratio, superior sensing resolutions of 1.63×10-6 refractive index unit (RIU) in refractive index change and 3.86×108 exosomes/mL in exosome detection were realized, respectively. Importantly, this PIA sensor can be imaged by a miniaturized microscope system coupled with a smart phone to realize a portable and highly sensitive healthcare device. The sensing resolution of 9.72×109 exosomes/mL in exosome detection was realized using the portable sensing system building upon a commercial smartphone.

Flat metallic surface gratings with sub-10 nm gaps controlled by atomic-layer deposition.

Atomic layer lithography is a recently reported new technology to fabricate deep-subwavelength features down to 1-2 nm, based on combinations of electron beam lithography (EBL) and atomic layer deposition (ALD). However, the patterning area is relatively small as limited by EBL, and the fabrication yield is not very high due to technical challenges. Here we report an improved procedure to fabricate flat metallic surfaces with sub-10 nm features based on ALD processes. To demonstrate the scalability of the new manufacturing method, we combine the ALD process with large area optical interference patterning, which is particularly promising for the development of practical applications for nanoelectronics and nanophotonics with extremely strong confinement of electromagnetic fields.

A multiple-resonator approach for broadband light absorption in a single layer of nanostructured graphene.

The interaction between two-dimensional (2D) materials and light is rather weak due to their ultrathin thickness. In order for these emerging 2D materials to achieve performances that are comparable to those of conventional optoelectronic devices, the light-material interaction must be significantly enhanced. An effective way to enhance the interaction is to use optical resonances. Efficient light absorption has been demonstrated in a single layer of graphene based on a variety of resonators. However, the bandwidth of the absorption enhancement is always narrow, which limits its application for optoelectronic devices. In order to broaden the enhancement of light-material interaction, here we propose a multiple-resonator approach based on nanostructured graphene. These nanostructures having different geometry support resonances at different frequencies. Owing to their deep subwavelength sizes, graphene resonators can be closely packed in space, resulting in a high optical density of states, which enables the broadband light absorption.

Nanocavity absorption enhancement for two-dimensional material monolayer systems.

Here we propose a strategy to enhance the light-matter interaction of two-dimensional (2D) material monolayers based on strong interference effect in planar nanocavities, and overcome the limitation between optical absorption and the atomically-thin thickness of 2D materials. By exploring the role of spacer layers with different thicknesses and refractive indices, we demonstrate that a nanocavity with an air spacer layer placed between a graphene monolayer and an aluminum reflector layer will enhance the exclusive absorption in the graphene monolayer effectively, which is particularly useful for the development of atomically-thin energy harvesting/conversion devices.

Artificial birefringent metallic planar structures for terahertz wave polarization manipulation.

We propose an artificial birefringent terahertz (THz) device constructed by subwavelength L-shaped hole arrays on a single metallic layer. This structure is able to work as a polarizer when the incident frequency is between the cut-off frequencies of two eigenmodes. When the incident wave is beyond cut-off frequencies of these two modes, it can be designed as an efficient half- or quarter-wave plate with extraordinary transmission properties. A big effective index difference from 0.254 to 0.768 is obtained using a subwavelength-thick planar structure, which can reduce the thickness of the device to one tenth of conventional quartz birefringent crystals for THz waves.

Experimental verification of the rainbow trapping effect in adiabatic plasmonic gratings.

We report the experimental observation of a trapped rainbow in adiabatically graded metallic gratings, designed to validate theoretical predictions for this unique plasmonic structure. One-dimensional graded nanogratings were fabricated and their surface dispersion properties tailored by varying the grating groove depth, whose dimensions were confirmed by atomic force microscopy. Tunable plasmonic bandgaps were observed experimentally, and direct optical measurements on graded grating structures show that light of different wavelengths in the 500-700-nm region is "trapped" at different positions along the grating, consistent with computer simulations, thus verifying the "rainbow" trapping effect.

Radiative cooling for vertical solar panels.

Radiative cooling presents a method for reducing the operational temperature of solar panels without additional energy consumption. However, its applicability to PV modules has been limited by the thermal properties of existing materials. To overcome these challenges, we introduce a V-shaped design that enhances cooling in vertical PV modules by effectively harnessing thermal radiation from both the front and rear sides, resulting in a substantial temperature reduction of 10.6°C under 1 sun illumination in controlled laboratory conditions. Field tests conducted in warm and humid conditions, specifically in Thuwal, Saudi Arabia, demonstrate a remarkable 15% increase in efficiency while maintaining an operating temperature 0.2°C lower than that of conventional horizontal PV modules, corresponding to a significant 16.8% increase in power output. Our innovative V-shaped design offers a promising thermal strategy suitable for diverse climates, contributing to improved performance and reduced module temperatures, thereby supporting the global pursuit of carbon neutrality.

Lubricated Surface in a Vertical Double-Sided Architecture for Radiative Cooling and Atmospheric Water Harvesting.

Radiative cooling significantly lowers condenser temperatures below ambient levels, enabling atmospheric water harvesting (AWH) without additional energy. However, traditional sky-facing condensers have low cooling power density, and water droplets remain pinned on surface, requiring active condensate collection. To overcome these challenges, a lubricated surface (LS) coating-consisting of highly scalable polydimethylsiloxane elastomer lubricated with silicone oil-is introduced on the condenser side in a vertical double-sided architecture. The design not only effectively doubles the local cooling power, but also eliminates contact-line pinning, enabling passive, gravity-driven collection of water. Robust AWH is demonstrated from a 30 × 30 cm2 sample in outdoor environments (of varying humidity levels and wind speeds in different months) and with no artificial flow of humidified air. In one outdoor test, the passive water collection rate of LS coating reaches 21 g m-2 h-1 double that on superhydrophobic surface, 10 g m-2 h-1. In indoor testing (20 °C and 80% relative humidity), this system achieves a condensation rate ≈87% of the theoretical limit with up to 90% of the total condensate passively collected. this approach achieves effective AWH in a decentralized approach that removes the need for piping infrastructure and external energy input.

A solar-driven atmospheric water extractor for off-grid freshwater generation and irrigation.

Solar-driven atmospheric water extraction (SAWE) is a sustainable technology for decentralized freshwater supply. However, most SAWE systems produce water intermittently due to the cyclic nature, with adoption hindered by complex design requirements or periodic manual operations. Herein, a fully passive SAWE system that can continuously produce freshwater under sunlight is presented. By optimizing the three-dimensional architecture to facilitate spontaneous mass transport and efficient energy utilization, this system can consistently produce 0.65 L m-2 h-1 of freshwater under 1-sun illumination at 90% relative humidity (RH) and functions in arid environments with an RH as low as 40%. We test the practical performance of a scaled-up system in Thuwal, Saudi Arabia over 35 days across two seasons. The system produces 2.0-3.0 L m-2 per day of freshwater during the summer and 1.0-2.8 L m-2 per day of freshwater during the fall, without requiring additional maintenance. Intriguingly, we demonstrate the system's potential for off-grid irrigation by successfully growing cabbage plants using atmospheric water. This passive SAWE system, harnessing solar energy to continuously extract moisture from air for drinking and irrigation, offers a promising solution to address the intertwined challenges of energy, water, and food supply, particularly for remote and water-scarce regions.

A robust thin-film droplet-induced electricity generator.

The pursuit of cost-effective, high-voltage electricity generators activated by droplets represents a new frontier in hydropower technology. This study presents an economical method for crafting droplet generators using common materials such as solid polytetrafluoroethylene (PTFE) films and readily available tapes, eliminating the need for specialized cleanroom facilities. A thorough investigation into voltage-limiting factors, encompassing device capacitance and induced electrode charges, reveals specific areas with potential for optimization. A substantial enhancement in the open-circuit voltage (Voc) was achieved, reaching approximately 282.2 ± 27.9 V-an impressive increase of around 60 V compared to earlier benchmarks. One device showcased its capability to power 100 LEDs concurrently, underscoring its efficacy. Ten such devices created diverse luminous patterns with uniform light intensity for each LED, showcasing the practical potential of the approach. The methodology's cost-effectiveness results in a remarkable cost reduction compared to solution-based materials, paving the way for the widespread adoption of large-scale water droplet energy harvesting.

Plasmonic interferometers for label-free multiplexed sensing.

We report a plasmonic interferometric biosensor based on a simple slit-groove metallic nanostructure that monitors the phase changes of surface plasmon polaritons resulting from biomolecular adsorptions. The proposed sensing scheme integrates the strengths of miniaturized plasmonic architectures with sensitive optical interferometry techniques. Sensing peak linewidths as narrow as 7 nm and refractive index resolutions of 1 × 10(-5) RIU were experimentally measured from a miniaturized sensing area of 10 × 30 µm(2) using a collinear transmission setup and a low-cost compact spectrometer. A high-density array of such interferometric sensors was also fabricated to demonstrate its potential for real-time multiplexed sensing using a CCD camera for intensity interrogation. A self-referencing method was introduced to increase the sensitivity and reduce sensor noise for multiplexing measurements. The enhanced sensing performance, small sensor footprint, and simple instrumentation and optical alignment suggest promise to integrate this platform into low-cost label-free biosensing devices with high multiplexing capabilities.

Imaging-based intelligent spectrometer on a plasmonic rainbow chip.

Compact, lightweight, and on-chip spectrometers are required to develop portable and handheld sensing and analysis applications. However, the performance of these miniaturized systems is usually much lower than their benchtop laboratory counterparts due to oversimplified optical architectures. Here, we develop a compact plasmonic "rainbow" chip for rapid, accurate dual-functional spectroscopic sensing that can surpass conventional portable spectrometers under selected conditions. The nanostructure consists of one-dimensional or two-dimensional graded metallic gratings. By using a single image obtained by an ordinary camera, this compact system can accurately and precisely determine the spectroscopic and polarimetric information of the illumination spectrum. Assisted by suitably trained deep learning algorithms, we demonstrate the characterization of optical rotatory dispersion of glucose solutions at two-peak and three-peak narrowband illumination across the visible spectrum using just a single image. This system holds the potential for integration with smartphones and lab-on-a-chip systems to develop applications for in situ analysis.

Atmospheric-moisture-induced polyacrylate hydrogels for hybrid passive cooling.

Heat stress is being exacerbated by global warming, jeopardizing human and social sustainability. As a result, reliable and energy-efficient cooling methods are highly sought-after. Here, we report a polyacrylate film fabricated by self-moisture-absorbing hygroscopic hydrogel for efficient hybrid passive cooling. Using one of the lowest-cost industrial materials (e.g., sodium polyacrylate), we demonstrate radiative cooling by reducing solar heating with high solar reflectance (0.93) while maximizing thermal emission with high mid-infrared emittance (0.99). Importantly, the manufacturing process utilizes only atmospheric moisture and requires no additional chemicals or energy consumption, making it a completely green process. Under sunlight illumination of 800 W m-2, the surface temperature of the film was reduced by 5 °C under a partly cloudy sky observed at Buffalo, NY. Combined with its hygroscopic feature, this film can simultaneously introduce evaporative cooling that is independent of access to the clear sky. The hybrid passive cooling approach is projected to decrease global carbon emissions by 118.4 billion kg/year compared to current air-conditioning facilities powered by electricity. Given its low-cost raw materials and excellent molding feature, the film can be manufactured through simple and cost-effective roll-to-roll processes, making it suitable for future building construction and personal thermal management needs.

Simultaneous Detection of Tumor Derived Exosomal Protein-MicroRNA Pairs with an Exo-PROS Biosensor for Cancer Diagnosis.

Tumor derived exosomes (TEXs) have emerged as promising biomarkers for cancer liquid biopsy. Conventional methods (such as ELISA and qRT-PCR) and emerging biosensing technologies mainly detect a single type of exosomal biomarker due to the distinct properties of different biomolecules. Sensitive detection of two different types of TEX biomarkers, i.e., protein and microRNA combined biomarkers, may greatly improve cancer diagnostic accuracy. We developed an exosome protein microRNA one-stop (Exo-PROS) biosensor that not only selectively captured TEXs but also enabled in situ, simultaneous detection of TEX protein-microRNA pairs via a surface plasmon resonance mechanism. Exo-PROS assay is a fast, reliable, low sample consumption, and user-friendly test. With a total of 175 cancer patients and normal controls, we demonstrated that TEX protein-microRNA pairs measured by Exo-PROS assay detected lung cancer and breast cancer with 99% and 96% accuracy, respectively. Exo-PROS assay also showed superior diagnostic performance to conventional ELISA and qRT-PCR methods. Our results demonstrated that Exo-PROS assay is a potent liquid biopsy assay for cancer diagnosis.

Nanostructured Gallium Nitride Membrane at Wafer Scale for Photo(Electro)catalytic Polluted Water Remediation.

Photo(electro)catalysis methods have drawn significant attention for efficient, energy-saving, and environmental-friendly organic contaminant degradation in wastewater. However, conventional oxide-based powder photocatalysts are limited to UV-light absorption and are unfavorable in the subsequent postseparation process. In this paper, a large-area crystalline-semiconductor nitride membrane with a distinct nanoporous surface is fabricated, which can be scaled up to a full wafer and easily retrieved after photodegradation. The unique nanoporous surface enhances broadband light absorption, provides abundant reactive sites, and promotes the dye-molecule reaction with adsorbed hydroxyl radicals on the surface. The superior electric contact between the nickel bottom layer and nitride membrane facilitates swift charge carrier transportation. In laboratory tests, the nanostructure membrane can degrade 93% of the dye in 6 h under illumination with a small applied bias (0.5 V vs Ag/AgCl). Furthermore, a 2 inch diameter wafer-scale membrane is deployed in a rooftop test under natural sunlight. The membrane operates stably for seven cycles (over 50 h) with an outstanding dye degradation efficiency (>92%) and satisfied average total organic carbon removal rate (≈50%) in each cycle. This demonstration thus opens the pathway toward the production of nanostructured semiconductor layers for large-scale and practical wastewater treatment using natural sunlight.