Microchemical Engineering in a 3D Ordered Channel Enhances Electrocatalysis.

The kinetics of electrode reactions including mass transfer and surface reaction is essential in electrocatalysis, as it strongly determines the apparent reaction rates, especially on nanostructured electrocatalysts. However, important challenges still remain in optimizing the kinetics of given catalysts with suitable constituents, morphology, and crystalline design to maximize the electrocatalytic performances. We propose a comprehensive kinetic model coupling mass transfer and surface reaction on the nanocatalyst-modified electrode surface to explore and shed light on the kinetic optimization in electrocatalysis. Moreover, a theory-guided microchemical engineering (MCE) strategy has been demonstrated to rationally redesign the catalysts with optimized kinetics. Experimental measurements for methanol oxidation reaction in a 3D ordered channel with tunable channel sizes confirm the calculation prediction. Under the optimized channel size, mass transfer and surface reaction in the channeled microreactor are both well regulated. This MCE strategy will bring about a significant leap forward in structured catalyst design and kinetic modulation.

Uniaxial Strain-Controlled Ground States in Manganite Films.

Strongly correlated perovskite oxides exhibit a plethera of intriguing phenomena and stimulate a great potential for multifunctional device applications. Utilizing tunable uniaxial strain, rather than biaxial or anisotropic strain, delivered from the crystallography of a single crystal substrate to modify the ground state of strongly correlated perovskite oxides has rarely been addressed for phase-space control. Here, we show that the physical properties of La2/3Ca1/3MnO3 (LCMO) films are remarkably different depending on the crystallographic orientations of the orthorhombic NdGaO3 (NGO) substrates. More importantly, the antiferromagnetic charge-ordered insulating (COI) phase induced in the (100) or (001)-oriented LCMO films can be dramatically promoted (or suppressed) by a uniaxial tensile (or compressive) bending stress along the in-plane [010] direction. By contrast, the COI phase is nearly unaffected along the other transverse in-plane directions. Results from scanning transmission electron microscopy reveal that the (100)- or (001)-oriented LCMO films are uniaxially tensile strained along the [010] direction, while the LCMO/NGO(010) and LCMO/NGO(110) films remaining as a bulklike ferromagnetic metallic state exhibit a different strain state. Density functional theory calculations further reveal that the cooperatively increased Jahn-Teller distortion and charge ordering may be indispensible for the inducing and promoting of the COI phase. These findings provide a path to understand the correlation between local and extended structural distortions imparted by coherent epitaxy and the electronic states for quantum phase engineering.

Soliton-Mediated Magnetic Reversal in an All-Oxide-Based Synthetic Antiferromagnetic Superlattice.

All-oxide-based synthetic antiferromagnets (SAFs) are attracting intense research interest due to their superior tunability and great potentials for antiferromagnetic spintronic devices. In this work, using the La2/3Ca1/3MnO3/CaRu1/2Ti1/2O3 (LCMO/CRTO) superlattice as a model SAF, we investigated the layer-resolved magnetic reversal mechanism by polarized neutron reflectivity. We found that the reversal of LCMO layer moments is mediated by nucleation, expansion, and shrinkage of a magnetic soliton. This unique magnetic reversal process creates a reversed magnetic configuration of the SAF after a simple field cycling. Therefore, it can enable vertical data transfer from the bottom to the top of the superlattice. The physical origin of this intriguing magnetic reversal process could be attributed to the cooperation of the surface spin-flop effect and enhanced uniaxial magnetic anisotropy of the bottom LCMO layer. This work may pave a way to utilize all-oxide-based SAFs for three-dimensional spintronic devices with vertical data transfer and high-density data storage.

Magnetotransport properties of square-net compounds of NbSiSb and NbGeSb single crystals.

We successfully grew single crystals of Si- and Ge-square-net compounds of NbSiSb and NbGeSb whose excellent crystalline quality are verified using single-crystal x-ray diffraction θ-2θ scans, rocking curves, scanning and transmission electron microscopies. Since these two compounds share major crystallographic similarity with the topological nodal-line semimetals of ZrSiS family, we employ density functional theory (DFT) calculations and magnetotransport measurements to demonstrate their band structures as well as the electron scattering mechanisms. DFT calculations show that the fermiology displays strong anisotropy from the crystallographic c-axis to the ab-plane and weak anisotropy within the ab plane, which is consistent with the strong anisotropic magnetotransport behaviors. Following the Kohler's scaling rule we prove that similar interband and intraband electron-phonon scattering mechanisms work in both the NbSiSb and NbGeSb compounds. The study of electronic transport mechanism in the presence of external magnetic field renders deep insight into topological behavior together with its Fermi surface, and the high similarity of crystallography and strong difference in band structures between the present single crystals and that of ZrSiS family provides the possibility to tune the band structure via element doping.

Misfit Relaxation Mechanisms and Domain Ordering in Anisotropically Strained Manganite Thin Films.

The evolution of anisotropic strain in epitaxial Pr0.5Sr0.5MnO3 films grown on (LaAlO3)0.3(SrAl0.5Ta0.5O3)0.7(110) substrates has been characterized by off-specular X-ray reciprocal space mappings on the (130), (310), (222), and (222̅) reflections in the scattering zone containing the [110] axis. We demonstrate that a multistage hierarchical structural evolution (single-domain-like structure, domain ordering, twin domains, and/or periodic structural modulations) occurs as the film thickness increases, and the structural modulation between the two transverse in-plane [11̅0] and [001] directions is quite different due to the monoclinic distortion of the film. We then show the relationship between the distribution of diffraction spots in reciprocal space and their corresponding domain configurations in real space under various thicknesses, which is closely correlated with thickness-dependent magnetic and magnetotransport properties. More importantly, the distribution and annihilation dynamics of the domain ordering are imaged utilizing home-built magnetic force microscope, revealing that the structural domains tilted toward either the [001] or [001̅] direction are arranged along the [11̅1] and [1̅11] crystal orientations. The direct visualization and dynamics of anisotropic-strain-related domain ordering will open a new path toward the control and manipulation of domain engineering in strongly correlated perovskite oxide films.

Magnetotransport and magnetic properties of the layered noncollinear antiferromagnetic Cr2Se3 single crystals.

We report on the growth of high-quality stoichiometric layered Cr2Se3 single crystals with metallic and noncollinear antiferromagnetic ground state using the chemical vapor transport (CVT) method. The crystals show weak ferromagnetism in the in-plane and out-of-plane directions below the Neél temperature (T N), however, the field-cooled out-of-plane magnetization at 500 Oe and 10 K (∼0.24 µ B/f.u.) is approximately 15 times larger than that of the in-plane one, indicating strong c-axis easy uniaxial magnetic anisotropy, which is further supported by the in-plane and out-of-plane isothermal anisotropic magnetic hysteresis loops and the angular dependent magnetoresistance (MR). The latter also reveals a decrease of the coercive field of the crystal upon the tilting of the weak ferromagnetic easy axis away from the direction of the magnetic field. Further, the out-of-plane isothermal MR are negative below T N and show butterfly shapes for T < 10 K and couple with the magnetic hysteresis M(H) loop. These results may help researchers better understand the interplay between the weak ferromagnetism and the magnetotransport properties of 2D itinerant noncollinear antiferromagnetic systems.

Robust Ferroelectric Properties in (K,Na)NbO3-Based Lead-Free Films via a Self-Assembled Nanocomposite Approach.

(K,Na)NbO3-based lead-free ferroelectric materials are highly desired in modern electronic applications and have long been considered as a strong candidate for replacing (Pb,Zr)TiO3, but most of them are deficient in large remnant polarization and decent thermal stability. Here, a unique lead-free 0.95(K0.49Na0.49Li0.02)(Nb0.8Ta0.2)O3-0.05CaZrO3 with 2 wt % MnO2 addition (KNNLT-CZ-M) ferroelectric film with special nanocomposite structures grown on La0.7Sr0.3MnO3-coated SrTiO3(001) substrate is demonstrated. The KNNLT-CZ-M films display excellent ferroelectricity with a large twice remnant polarization of 64.91 µC/cm2, a superior thermal stability of ferroelectricity from -196 to 300 °C, and a high Curie temperature of 400 °C. These robust performances could be attributed to the densely arranged self-assembled nanocolumns (∼10 nm in diameter) in the films, which can vertically strain the matrix and enhance its b/a ratio. The formation of the nanocolumns critically depends on the CaZrO3 component. Our results may help the design of a new type of lead-free ferroelectric films and promote their potential applications in microelectronic devices.

Interfacial Engineering of Ferromagnetism in Epitaxial Manganite/Ruthenate Superlattices via Interlayer Chemical Doping.

Interfacial charge transfer and structural proximity effects are the two essential routes to trigger and tune numerous functionalities of perovskite oxide heterostructures. However, the cooperation and competition of these two interfacial effects in one epitaxial system have not been fully understood. Herein, we fabricate a series of La0.67Ca0.33MnO3/CaRuO3 superlattices and introduce various chemical doping in the nonmagnetic CaRuO3 interlayers. We found that Ti, Sr, and La doping in the CaRuO3 layer can effectively tune the interfacial charge transfer and octahedral rotation, thus modulating the ferromagnetism of the superlattices. Specifically, the B-site Ti doping depletes the Ru 4d band and suppresses the interfacial charge transfer, leading to a decay of ferromagnetic Curie temperature ( TC). In contrast, the A-site Sr doping maintains a sizable charge transfer and meanwhile suppresses the octahedral rotation, which facilitates ferromagnetism and significantly enhances the TC up to 291 K. The La doping turns out to localize the itinerant electrons in the CaRuO3 layer, which suppresses both the interfacial charge transfer and ferromagnetism. The observed intriguing interfacial engineering of magnetism would pave a new way to understand the collective effects of interfacial charge transfer and structural proximity on the physical properties of oxide heterostructures.

Nonvolatile Control of the Electronic Properties of In2-xCrxO3 Semiconductor Films by Ferroelectric Polarization Charge.

A series of Cr-doped In2-xCrxO3 (ICO) semiconductor thin films were epitaxially grown on (111)-oriented 0.71Pb(Mg1/3Nb2/3)O3-0.29PbTiO3 (PMN-0.29PT) single-crystal substrates by the pulsed laser deposition. Upon the application of an electric field to the PMN-0.29PT substrate along the thickness direction, we realized in situ, reversible, and nonvolatile control of the electronic properties and Fermi level of the films, which are manifested by abundant physical phenomena such as the n-type to p-type transformation, metal-semiconductor transition, metal-insulator transition, crossover of the magnetoresistance (MR) from negative to positive, and a large nonvolatile on-and-off ratio of 5.5 × 104% at room temperature. We also strictly disclose that both the sign and the magnitude of MR are determined by the electron carrier density of ICO films, which could modify the s-d exchange interaction and weak localization effect. Our results demonstrate that the ferroelectric gating approach using PMN-PT can be utilized to gain deeper insight into the carrier-density-related electronic properties of In2O3-based semiconductors and provide a simple and energy efficient way to construct multifunctional devices which can utilize the unique properties of composite materials.

Nonvolatile and Reversible Ferroelectric Control of Electronic Properties of Bi2Te3 Topological Insulator Thin Films Grown on Pb(Mg1/3Nb2/3)O3-PbTiO3 Single Crystals.

Single-phase (00 l)-oriented Bi2Te3 topological insulator thin films have been deposited on (111)-oriented ferroelectric 0.71Pb(Mg1/3Nb2/3)O3-0.29PbTiO3 (PMN-PT) single-crystal substrates. Taking advantage of the nonvolatile polarization charges induced by the polarization direction switching of PMN-PT substrates at room temperature, the carrier density, Fermi level, magnetoconductance, conductance channel, phase coherence length, and quantum corrections to the conductance can be in situ modulated in a reversible and nonvolatile manner. Specifically, upon the polarization switching from the positively poled Pr+ state (i.e., polarization direction points to the film) to the negatively poled Pr- (i.e., polarization direction points to the bottom electrode) state, both the electron carrier density and the Fermi wave vector decrease significantly, reflecting a shift of the Fermi level toward the Dirac point. The polarization switching from Pr+ to Pr- also results in significant increase of the conductance channel α from -0.15 to -0.3 and a decrease of the phase coherence length from 200 to 80 nm at T = 2 K as well as a reduction of the electron-electron interaction. All these results demonstrate that electric-voltage control of physical properties using PMN-PT as both substrates and gating materials provides a simple and a straightforward approach to realize reversible and nonvolatile tuning of electronic properties of topological thin films and may be further extended to study carrier density-related quantum transport properties of other quantum matter.

Integration of Oxide Semiconductor Thin Films with Relaxor-Based Ferroelectric Single Crystals with Large Reversible and Nonvolatile Modulation of Electronic Properties.

We report the fabrication of 0.71Pb(Mg1/3Nb2/3)O3-0.29PbTiO3 (PMN-0.29PT)-based ferroelectric field effect transistors (FeFETs) by the epitaxial growth of cobalt-doped tin dioxide (SnO2) semiconductor thin films on PMN-0.29PT single crystals. Using such FeFETs we realized in situ, reversible, and nonvolatile manipulation of the electron carrier density and achieved a large nonvolatile modulation of the resistance (∼330%) of the SnO2:Co films through the polarization switching of PMN-0.29PT at 300 K. Particularly, combining the ferroelectric gating with piezoresponse force microscopy, X-ray diffraction, Hall effect, and magnetoresistance (MR), we rigorously disclose that both sign and magnitude of the MR are intrinsically determined by the electron carrier density, which could modify the s-d exchange interaction of the SnO2:Co films. Furthermore, we realized multilevel resistance states of the SnO2:Co films by combining the ferroelectric gating with ultraviolet light illumination, demonstrating that the FeFETs have potential applications in multistate resistive memories and electro-optical devices.

All-oxide-based synthetic antiferromagnets exhibiting layer-resolved magnetization reversal.

Synthesizing antiferromagnets with correlated oxides has been challenging, owing partly to the markedly degraded ferromagnetism of the magnetic layer at nanoscale thicknesses. Here we report on the engineering of an antiferromagnetic interlayer exchange coupling (AF-IEC) between ultrathin but ferromagnetic La2/3Ca1/3MnO3 layers across an insulating CaRu1/2Ti1/2O3 spacer. The layer-resolved magnetic switching leads to sharp steplike hysteresis loops with magnetization plateaus depending on the repetition number of the stacking bilayers. The magnetization configurations can be switched at moderate fields of hundreds of oersted. Moreover, the AF-IEC can also be realized with an alternative magnetic layer of La2/3Sr1/3MnO3 that possesses a Curie temperature near room temperature. The findings will add functionalities to devices with correlated-oxide interfaces.

Interfacial Control of Ferromagnetism in Ultrathin La0.67Ca0.33MnO3 Sandwiched between CaRu1-xTixO3 (x = 0-0.8) Epilayers.

Controlling functionalities in oxide heterostructures remains challenging for the rather complex interfacial interactions. Here, by modifying the interface properties with chemical doping, we achieve a nontrivial control over the ferromagnetism in ultrathin La0.67Ca0.33MnO3 (LCMO) layer sandwiched between CaRu1-xTixO3 [CRTO(x)] epilayers. The Ti doping suppresses the interfacial electron transfer from CRTO(x) to LCMO side; as a result, a steadily decreased Curie temperature with increasing x, from 262 K at x = 0 to 186 K at x = 0.8, is observed for the structures with LCMO fixed at 3.2 nm. Moreover, for more insulating CRTO(x ≥ 0.5), the electron confinement induces an interfacial Mn-eg(x2-y2) orbital order in LCMO which further attenuates the ferromagnetism. Also, in order to characterize the heterointerfaces, for the first time the doping- and thickness-dependent metal-insulator transitions in CRTO(x) films are examined. Our results demonstrate that the LCMO/CRTO(x) heterostructure could be a model system for investigating the interfacial multiple interactions in correlated oxides.

Semiconductor/Piezoelectrics Hybrid Heterostructures with Highly Effective Gate-Tunable Electrotransport and Magnetic Behaviors.

We report the epitaxial growth of oxygen deficient titanium dioxide thin films on 0.7Pb(Mg1/3Nb2/3)O3-0.3PbTiO3 (PMN-PT) single crystals and realized highly effective in situ electrostatic manipulation of electrotransport and magnetism of TiO2-δ films via gate voltages. Upon the polarization switching in the PMN-PT, the carrier density of the TiO2-δ film could be reversibly modified, resulting in a large nonvolatile resistivity modulation by ∼51% at T = 300 K, approximately 4-12 times larger than that of other transition-metal oxide film/PMN-PT structures. By taking advantage of in situ manipulation of the carrier density via gate voltages, we found that competition between the trap of electrons by the Ti3+-VO pairs and that by the positive polarization charges at the interface results in a significant resistivity relaxation upon the polarization switching, and revealed that magnetization is inversely correlated with the carrier density of the TiO2-δ film. Such hybrid structures combining materials with dissimilar functionalities may have potential applications in multifunctional devices which can take advantage of the useful and unique properties of both materials.

Electric-field-modulated nonvolatile resistance switching in VO2/PMN-PT(111) heterostructures.

The electric-field-modulated resistance switching in VO2 thin films grown on piezoelectric (111)-0.68Pb(Mg1/3Nb2/3)O3-0.32PbTiO3 (PMN-PT) substrates has been investigated. Large relative change in resistance (10.7%) was observed in VO2/PMN-PT(111) hererostructures at room temperature. For a substrate with a given polarization direction, stable resistive states of VO2 films can be realized even when the applied electric fields are removed from the heterostructures. By sweeping electric fields across the heterostructure appropriately, multiple resistive states can be achieved. These stable resistive states result from the different stable remnant strain states of substrate, which is related to the rearrangements of ferroelectric domain structures in PMN-PT(111) substrate. The resistance switching tuned by electric field in our work may have potential applications for novel electronic devices.

Piezo-phototronic effect-induced dual-mode light and ultrasound emissions from ZnS:Mn/PMN-PT thin-film structures.

Electric-field-controllable luminescence of a ZnS:Mn/PMN-PT system is demonstrated. The light-emission of ZnS:Mn is caused by the piezoelectric potential, resulting from the converse piezoelectric effect of the PMN-PT substrate. Simultaneous generation of light and ultrasound waves is observed in this single system, which offers great potential to develop a dual-modal source combing light and ultrasonic waves for various applications.