Degenerative lumbar disc disease: in vivo data support the rationale for the selection of appropriate animal models.

Since low-back pain is increasing in ageing populations, current research efforts are focused on obtaining a better understanding of the pathophysiology of intervertebral disc degeneration and on developing new therapeutic strategies. This requires adequate and clinically relevant models of the disease process. Ex vivo models can provide insights into isolated aspects of the degenerative/regenerative processes involved; although, ultimately, in vivo models are needed for preclinical translational studies. Such models have been developed in numerous animal species with significant variations in size and disc physiology and their number is considerable. Importantly, the choice of the model has to be tailored to the aim of the study. Given the number of available options, it is important to have a good understanding of the various models of disc degeneration and to be fully aware of their advantages and limitations. After comparing the anatomy and histology of intervertebral discs in animals and humans, the present study provides an overview of the different models of in vivo disc degeneration. It also provides a comprehensive guide with suggested criteria to select the most appropriate animal model in a question-driven manner.

In vivo experimental imaging of osteochondral defects and their healing using (99m)Tc-NTP 15-5 radiotracer.

PURPOSE: A rabbit model of osteochondral defects (OD) and spontaneous healing was longitudinally followed over 12 weeks, by in vivo joint scintigraphy using (99m)Tc-NTP 15-5, and histology. METHODS: We used two models, one with one OD (OD1 group) in the femoral condyle of one knee and the other with two ODs (OD2 group) in the femoral condyle of one knee, with the contralateral knees serving as the reference. A serial longitudinal imaging study was performed with the scintigraphic ratio (SR, operated knee uptake/contralateral knee uptake) determined at each time-point. RESULTS: ODs were imaged as radioactive defects. The SR was decreased with respective to controls, with values of 0.73 ± 0.08 and 0.65 ± 0.07 in the OD1 and OD2 groups, respectively, at 4 weeks after surgery. Histology of both OD groups revealed the presence of repair tissue characterized by a small amount of sulphated glycosaminoglycans and collagen. CONCLUSION: (99m)Tc-NTP 15-5 imaging provided quantitative criteria useful for in vivo evaluation of cartilage trauma and healing.

Haematogenous osteomyelitis: clinical presentation and outcome in three dogs.

Haematogenous osteomyelitis is a rare form of bone infection in adult dogs. Most commonly the infection is iatrogenic or traumatic in origin. The authors report three different presentations of haematogenous osteomyelitis: a focal pelvic localisation in a growing dog, a vertebral lesion in an adult dog with associated neurological signs and a multifocal affection in another adult dog with concomitant pathological fractures. Clinical signs included pyrexia of undetermined origin, focal pain and lameness. Diagnostic investigation included radiographic imaging, bone scintigraphy, magnetic resonance imaging, surgical biopsy, and bacteriological culture with sensitivity testing of biopsy specimens as well as of peripheral blood samples. Treatment consisted of long-term antimicrobial therapy and surgical debridement with curettage of the pelvic abscess of the young dog and decompressive hemilaminectomy of the second dog, with excellent recovery. The dog affected by polyostotic bone involvement and suffering pathological fractures was euthanatized. Haematogenous osteomyelitis may be a diagnostic and therapeutic challenge and may present as a devastating skeletal condition, even in adult dogs, and should be considered amongst the differential diagnoses early on to allow effective treatment.

An injectable cellulose-based hydrogel for the transfer of autologous nasal chondrocytes in articular cartilage defects.

Articular cartilage has a low capacity for spontaneous repair. To promote the repair of this tissue, the transfer of autologous chondrocytes using a three-dimensional matrix appears promising. In this context, the aim of the present work was to investigate the potential use of autologous rabbit nasal chondrocytes (RNC) associated with an injectable self-setting cellulose-based hydrogel (Si-HPMC). Firstly, the influence of Si-HPMC on chondrocytic phenotype was investigated by real-time PCR for specific chondrocyte markers (type II collagen and aggrecan) and type I collagen. Thereafter, autologous RNC were amplified in vitro for 4 weeks before transplantation with Si-HPMC into a rabbit articular cartilage defect followed by analysis 6 weeks later. Implants were histologically characterized for the presence of sulfated GAG and type II collagen. Transcripts analysis indicated that dedifferentiated RNC recovered expression of the main chondrocytic markers after in vitro three-dimensional culture within Si-HPMC. Histological analysis of autologous RNC transplanted in an articular cartilage defect revealed the formation of repair tissue with a histological organization similar to that of healthy articular cartilage. In addition, immunohistological analysis of type II collagen suggested that the repair tissue was a hyaline-like cartilage. Si-HPMC hydrogel associated with nasal chondrocytes therefore appears a promising injectable tissue engineering device for the repair of articular cartilage.

Effects of autologous platelet rich plasma gel and calcium phosphate biomaterials on bone healing in an ulnar ostectomy model in dogs.

The aim of the study was to evaluate the bone healing properties of an osteopromotive platelet rich plasma (PRP) gel in combination with osteoconductive calcium phosphate (CaP) ceramic granules in a long-bone critical size defect in dogs. A standardised 2 cm long ulnar ostectomy was performed bilaterally in four dogs to compare new-bone formation by CaP matrix with and without association with PRP. Radiographic and histological evaluations were performed blindly. Radiographic evaluation was performed at three, six, nine, 12 and 16 weeks postoperatively. Quantitative measurements of new-bone formation were compared using statistical analysis. At explantation 16 weeks after surgery, no significant ossification was present, neither with CaP granules alone nor in association with PRP gel, and there was no difference of radiodensity between the groups. Qualitative histological evaluation demonstrated for both types of implants the presence of non-mineralised fibrous connective tissue around the CaP granules. New-bone formation was only present to a very small extent within the macropores of the CaP granules at the distal bone-implant interface. In our model which exhibited very limited osteoconduction, neither the CaP granules alone nor in association with PRP were sufficient to stimulate bone healing. In this canine model employing a critical size ulnar gap, the combination of CaP granules and PRP did not effectively promote bone regeneration.

Implants delivering bisphosphonate locally increase periprosthetic bone density in an osteoporotic sheep model. A pilot study.

It is a clinical challenge to obtain a sufficient orthopaedic implant fixation in weak osteoporotic bone. When the primary implant fixation is poor, micromotions occur at the bone-implant interface, activating osteoclasts, which leads to implant loosening. Bisphosphonate can be used to prevent the osteoclastic response, but when administered systemically its bioavailability is low and the time it takes for the drug to reach the periprosthetic bone may be a limiting factor. Recent data has shown that delivering bisphosphonate locally from the implant surface could be an interesting solution. Local bisphosphonate delivery increased periprosthetic bone density, which leads to a stronger implant fixation, as demonstrated in rats by the increased implant pullout force. The aim of the present study was to verify the positive effect on periprosthetic bone remodelling of local bisphosphonate delivery in an osteoporotic sheep model. Four implants coated with zoledronate and two control implants were inserted in the femoral condyle of ovariectomized sheep for 4 weeks. The bone at the implant surface was 50% higher in the zoledronate-group compared to control group. This effect was significant up to a distance of 400mum from the implant surface. The presented results are similar to what was observed in the osteoporotic rat model, which suggest that the concept of releasing zoledronate locally from the implant to increase the implant fixation is not species specific. The results of this trial study support the claim that local zoledronate could increase the fixation of an implant in weak bone.

Engineering cartilage with human nasal chondrocytes and a silanized hydroxypropyl methylcellulose hydrogel.

Tissue engineering strategies, based on developing three-dimensional scaffolds capable of transferring autologous chondrogenic cells, holds promise for the restoration of damaged cartilage. In this study, the authors aimed at determining whether a recently developed silanized hydroxypropyl methylcellulose (Si-HPMC) hydrogel can be a suitable scaffold for human nasal chondrocytes (HNC)-based cartilage engineering. Methyltetrazolium salt assay and cell counting experiments first revealed that Si-HPMC enabled the proliferation of HNC. Cell tracker green staining further demonstrated that HNC were able to form nodular structures in this three-dimensional scaffold. HNC phenotype was then assessed by RT-PCR analysis of type II collagen and aggrecan expression as well as alcian blue staining of extracellular matrix. Our data indicated that Si-HPMC allowed the maintenance and the recovery of a chondrocytic phenotype. The ability of constructs HNC/Si-HPMC to form a cartilaginous tissue in vivo was finally investigated after 3 weeks of implantation in subcutaneous pockets of nude mice. Histological examination of the engineered constructs revealed the formation of a cartilage-like tissue with an extracellular matrix containing glycosaminoglycans and type II collagen. The whole of these results demonstrate that Si-HPMC hydrogel associated to HNC is a convenient approach for cartilage tissue engineering.

Biphasic calcium phosphate ceramics for bone reconstruction: A review of biological response.

Autologous bone graft is considered as the gold standard in bone reconstructive surgery. However, the quantity of bone available is limited and the harvesting procedure requires a second surgical site resulting in severe complications. Due to these limits, scientists and clinicians have considered alternatives to autologous bone graft. Calcium phosphates (CaPs) biomaterials including biphasic calcium phosphate (BCP) ceramics have proven efficacy in numerous clinical indications. Their specific physico-chemical properties (HA/TCP ratio, dual porosity and subsequent interconnected architecture) control (regulate/condition) the progressive resorption and the bone substitution process. By describing the most significant biological responses reported in the last 30years, we review the main events that made their clinical success. We also discuss about their exciting future applications as osteoconductive scaffold for delivering various bioactive molecules or bone cells in bone tissue engineering and regenerative medicine. STATEMENT OF SIGNIFICANCE: Nowadays, BCPs are definitely considered as the gold standard of bone substitutes in bone reconstructive surgery. Among the numerous clinical studies in literature demonstrating the performance of BCP, Passuti et al. and Randsford et al. studies largely contributed to the emergence of the BCPs. It could be interesting to come back to the main events that made their success and could explain their large adhesion from scientists to clinicians. This paper aims to review the most significant biological responses reported in the last 30years, of these BCP-based materials. We also discuss about their exciting future applications as osteoconductive scaffold for delivering various bioactive molecules or bone cells in bone tissue engineering and regenerative medicine.

Calcium phosphate drug delivery system: influence of local zoledronate release on bone implant osteointegration.

Despite total hip replacement (THR) gives generally satisfactory results, the quality of outcome in young patients is markedly decreased compared to the average THR outcome. For this population, pharmacological treatment with bisphosphonate would be beneficial to decrease the peri-implant osteolysis. However, as this population does not necessarily suffer from osteoporosis, a nonsystemic treatment would be preferable. Zoledronate was then grafted to hydroxyapatite (HA) coating of titanium implants. The implants were inserted in rat condyles with various zoledronate concentrations. A positive concentration-dependent effect was observed on the peri-implant bone density and on different histomorphometric parameters. Importantly for the outcome of the implants, the mechanical fixation was increased by the local presence of zoledronate. The obtained results open the way of an easy transformation of currently existing HA-coated implants by grafting bisphosphonate onto the coating in order to increase their service life in the patients.

Human growth hormone locally released in bone sites by calcium-phosphate biomaterial stimulates ceramic bone substitution without systemic effects: a rabbit study.

Calcium-phosphate bone replacement biomaterial has been used as a drug carrier for therapeutic agents. This study investigated the efficacy of local administration of human growth hormone (hGH) by macroporous biphasic calcium phosphate (MBCP) implants in improving the bone substitution qualities of ceramics. hGH release from MBCP implants loaded with 1 microg of hGH was rapid during the first 48 h and then sustained for a total of 9 days. Immunolocalization of hGH in vitro and in vivo by transmission electron microscopy showed its presence inside the material, indicating that it was able to penetrate within the porosity of the ceramic during the adsorption process. MBCP cylinders (6 x 6 mm) were loaded with 0.1, 1, and 10 microg of hGH and implanted into rabbit femurs (n = 40). The effects of locally released hGH on bone ingrowth and ceramic resorption were evaluated by scanning electron microscopy and image analysis. The results indicated that hGH increased bone ingrowth (+65%) and ceramic resorption (+140%) significantly in comparison with control implants and that the increase was dose dependent. Biochemical parameters monitored in rabbit plasma and urine, as well as the absence of any significant difference between contralateral implants and the control, indicated that hGH did not produce detectable systemic effects. Thus, the use of MBCP appears to be effective for local delivery of hGH, resulting in improved bone substitution.

In vivo retrovirus-mediated gene transfer to the liver of dogs results in transient expression and induction of a cytotoxic immune response.

Gene transfer in regenerating dog liver using high-titer recombinant retroviral vectors carrying the E. coli beta-galactosidase gene was studied. Supernatants containing amphotropic or gibbon ape pseudotyped recombinant retroviruses were infused into a peripheral vein in beagle dogs after partial hepatectomy. The kinetics of liver regeneration were determined in the animals and daily infusions were carried out for 4 or 5 days during the regeneration period. Up to 2.8% of hepatocytes were beta-galactosidase positive at the end of the procedure. However, the number of positive cells declined rapidly and few positive hepatocytes were detected after 3 weeks. PCR demonstrated the disappearance of the provirus. Histologically, inflammatory lesions were observed in the transduced livers. Finally, we demonstrated the presence of a cytotoxic T lymphocyte immune response directed against beta-galactosidase-expressing cells, which could explain the disappearance of the transgene. This work suggests that the efficiency of in vivo gene delivery using high-titer retroviral vectors directly infused into the circulation may be hampered by a cytotoxic immune response against the infected cells.

Injectable bone substitute using a hydrophilic polymer.

We studied a new injectable biomaterial for bone and dental surgery consisting of a hydrophilic polymer as matrix and bioactive calcium phosphate (CaP) ceramics as fillers. This material is composed of complex fluids whose flow is determined by the laws of rheology. We investigated the macromolecular effects on this composite in a tube. The stability of the polymer and the mixture is essential to the production of a ready-to-use injectable biomaterial. These flow properties are necessary to obtain CaP bioactivity in a dental canal or bone defect during percutaneous surgery. Macromolecules provide spaces between CaP ceramic granules and facilitate the role of the biological agents of bone substitution.

Biphasic calcium phosphate/hydrosoluble polymer composites: a new concept for bone and dental substitution biomaterials.

Calcium phosphate materials have been increasingly employed in orthopedic and dental applications in recent years and are now being developed for use in noninvasive surgery or as carriers for drug delivery systems. We developed an injectable bone substitute (IBS) constituted of biphasic calcium phosphate and a hydrosoluble polymer as a carrier. In vivo biocompatibility and biofunctionality of IBS were tested in rabbits using implants in osseous and nonosseous areas. The results obtained demonstrated that the concept of IBS, a filler without initial mechanical properties but able to be rapidly resorbed and replaced by newly formed bone, can be applied to new surgical applications in orthopedic surgery, maxillofacial surgery, and dentistry for pulp capping and root filling.

Short-term effects of mineral particle sizes on cellular degradation activity after implantation of injectable calcium phosphate biomaterials and the consequences for bone substitution.

This in vivo study investigated the influence of two calcium phosphate particle sizes (40-80 microm and 200-500 microm) on the cellular degradation activity associated with the bone substitution process of two injectable bone substitutes (IBS). The tested biomaterials were obtained by associating a biphasic calcium phosphate (BCP) ceramic mineral phase and a 3% aqueous solution of a cellulosic polymer (hydroxypropylmethylcellulose). Both were injected into osseous defects at the distal end of rabbit femurs for 2- and 3-week periods. Quantitative results for tartrate-resistant acid phosphatase (TRAP) cellular activity, new bone formation, and ceramic resorption were studied for statistical purposes. Positive TRAP-stained degradation cells were significantly more numerous for IBS 40-80 than IBS 200-500, regardless of implantation time. BCP degradation was quite marked during the first 2 weeks for IBS 40-80, and bone colonization occurred more extensively for IBS 40-80 than for IBS 200-500. The resorption-bone substitution process occurred earlier and faster for IBS 40-80 than IBS 200-500. Both tested IBS displayed similar biological efficiency, with conserved in vivo bioactivity and bone-filling ability. Differences in calcium phosphate particle sizes influenced cellular degradation activity and ceramic resorption but were compatible with efficient bone substitution.

Macroporous biphasic calcium phosphate ceramics: influence of macropore diameter and macroporosity percentage on bone ingrowth.

A total of 60 cylindrical 6 x 6 mm samples of a macroporous biphasic calcium phosphate (MBCP) ceramic were implanted into a distal femoral site in 30 rabbits. These samples represented six kinds of implants with two different macropore diameters and three different macroporosity percentages. Analysis of backscattered electron images of implant surfaces analysed by a factorial design method showed that implants with 565 microm pore size provided more abundant newly formed bone both in peripheral and deep pores than those with 300 microm pore size. No significant differences were found between implants with 40 and 50% macroporosity, suggesting that the influence of macropore size on bone ingrowth was greater than that of macroporosity percentage. MBCP implants with 565 microm pore diameter and 40% macroporosity represented the optimal association for homogeneous and abundant bone ingrowth.

Synchrotron X-ray microtomography (on a micron scale) provides three-dimensional imaging representation of bone ingrowth in calcium phosphate biomaterials.

This study used synchrotron X-ray microtomography on a micron scale to compare three-dimensional (3D) bone ingrowth after implantation of various calcium phosphate bone substitutes in a rabbit model. The advantage of using this new method for the study of biomaterials was then compared with histomorphometry for analysis of interconnection and bone ingrowth. The study focused on the newly formed bone-biomaterial interface. Macroporous Biphasic Calcium Phosphate (MBCP) ceramic blocks and two different injectable calcium phosphate biomaterials [an injectable bone substitute (IBS) consisting of a biphasic calcium phosphate granule suspension in hydrosoluble polymer and a calcium phosphate cement material (CPC)] were studied after in vivo implantation. Absorption or phase-contrast microtomography was performed with the dedicated set-up at beamline ID22. Experimental spatial resolution was between 1 and 1.4 microm, depending on experimental radiation. All calcium phosphates tested showed osteoconduction. IBS observations after 3D reconstruction showed interconnected bioactive biomaterial with total open macroporosity and complete bone ingrowth as early as 3 weeks after implantation. This experimentation was consistent with two-dimensional histomorphometric analysis, which confirmed its suitability for biomaterials. This 3D study relates the different types of bone substitution to biomaterial architecture. As porosity and interconnection increase, bone ingrowth becomes greater at the expense of the bone substitute: IBS>MBCP>CPC.

Leg ulcers and hydroxyurea: forty-one cases.

BACKGROUND: Hydroxyurea is an antitumor agent used to treat chronic myeloproliferative disorders. Leg ulcerations have been reported in patients undergoing long-term hydroxyurea therapy for myeloproliferative diseases. To better define this dermatological adverse effect of hydroxyurea therapy and to try to understand the pathophysiological process of this disease, we collected medical information for such patients in a multicenter retrospective study. OBSERVATIONS: Forty-one patients (mean age, 67 years) developed leg ulcerations while undergoing hydroxyurea therapy (mean therapy duration, 5 years). The sex ratio was 1, and there was no underlying vascular disease. Hematologic abnormalities were identified. Complete recovery from the ulcerations occurred quickly after withdrawal of treatment in 33 (80%) of the cases. CONCLUSIONS: This longest-reported series of patients confirms the role of hydroxyurea therapy in the onset of leg ulcerations. Healing or improvement requires cessation of treatment. Cutaneous atrophy and impaired wound healing may explain the relationship between hydroxyurea and leg ulcers. In addition, the megaloblastic erythrocytes resulting from the presence of hydroxyurea may circulate poorly through the capillary network. A prospective study in hematologic centers would be valuable.

Calcium-deficient apatite: a first in vivo study concerning bone ingrowth.

Biphasic calcium phosphate (BCP) materials are increasingly used to restore bone loss in surgery. Calcium-deficient apatites (CDA), the precursors of BCP, are closer in structure to biological apatites and can be associated with therapeutic agents to form drug-delivery systems. The purpose of this first in vivo study of CDA was to evaluate the osteoconductive properties of two composites, consisting of 40-80 microm granules carried by a cellulose-derived polymer, used to fill critical size bone defects in rabbit femoral ends. Animals were sacrificed 2 or 3 weeks after implantation. Histomorphometric analysis of scanning electron microscopy implant surface files was performed using gray level threshold that distinguish between bone or materials (white) and noncalcified tissue (black). Quantitative results for new bone formation showed no significant differences between the composites or the implantation periods. However, nearly all of the CDA disappeared early while supporting more extensive bone colonization than biphasic calcium phosphates implanted in the same conditions.

Noninvasive bone replacement with a new injectable calcium phosphate biomaterial.

The use of injectable calcium phosphate (CaP) biomaterials in noninvasive surgery should provide efficient bone colonization and implantation. Two different kinds of injectable biomaterials are presently under development: ionic hydraulic bone cements that harden in vivo after injection, and an association of biphasic calcium phosphate (BCP) ceramic granules and a water-soluble polymer vehicle (a technique particularly investigated by our group), providing an injectable CaP bone substitute (IBS). In our study, we compared these two approaches, using physicochemical characterizations and in vivo evaluations in light microscopy, scanning electron microscopy, and three-dimensional microtomography with synchrotron technology. Three weeks after implantation in rabbit bone, both biomaterials showed perfect biocompatibility and bioactivity, but new bone formation and degradation of the biomaterial were significantly greater for BCP granules than for ionic cement. Newly formed bone developed, binding the BCP granules together, whereas new bone grew only on the surface of the cement, which remained dense, with no obvious degradation 3 weeks after implantation. This study confirms that BCP granules carried by a cellulosic polymer conserve bioactivity and are conducive to earlier and more extensive bone substitution than a carbonated-hydroxyapatite bone cement. The presence of intergranular spaces in the BCP preparation, as shown on microtomography imaging, seems particularly favorable, allowing body fluids to reach each BCP granule immediately after implantation. Thus, the IBS functions as a completely interconnected ceramic with total open macroporosity. This new bone replacement approach should facilitate microinvasive bone surgery and local delivery of bone therapy agents.

A new injectable calcium phosphate biomaterial for immediate bone filling of extraction sockets: a preliminary study in dogs.

BACKGROUND: Many different bone substitutes, such as autografts, allografts or synthetic biomaterials have been proposed to restore alveolar bone loss and support efficient placement of dental implants. This experimental study evaluated the osteoconductive properties of an injectable bone substitute (IBS) composed of a polymeric carrier and a calcium phosphate mineral phase, used to fill mandibular and maxillary canine extraction sockets. METHODS: The polymer was a cellulose derivative (methyl-hydroxy-propyl-cellulose, MHPC), and the mineral phase consisted of granules of biphasic calcium phosphate (BCP) ceramics 200 to 500 microm in diameter. Mandibular and maxillary premolars extracted from 3 dogs (a total of 60 extraction sites) were immediately treated with the IBS or left unfilled as control sites. Animals were sacrificed 3 months after implantation and all extraction sockets were prepared for histological evaluation. RESULTS: Qualitative histological studies showed that the IBS was able to support the extensive apposition of well-mineralized newly formed lamellar bone over the entire socket surface and appeared to prevent alveolar ridge bone loss in treated extraction sites. Quantitative evaluation showed that the amount of newly formed bone was significantly higher in mandibular than maxillary extraction sockets for both treated and control sites. CONCLUSIONS: An injectable bone substitute composed of a polymeric carrier and calcium phosphate was effective in enhancing the bone fill of extraction sockets. This approach may prove promising for periodontal lesions. The material expressed osteoconductive capacities, and the biological properties of the mineral phase were conserved.