RESUMEN
Bacterial infections pose a significant threat to human health and safety, necessitating the urgent resolution of the problem through the development and implementation of highly effective antibacterial agents. However, the emergence of multidrug-resistant bacteria has diminished the satisfactory effectiveness of antibacterial treatments. To overcome this obstacle, we developed effective antibacterial agents by chemical reduction for inhibiting bacterial proliferation and inducing membrane damage. Specifically, four different types of chitosan/Ag nanoparticle (CS-AgNPs-i) (i-1, 2, 3, 4) complexes were synthesized by varying the quantity of chitosan added during the synthesis process. We found that the amount of CS does not affect the morphology and size of CS-AgNPs-i, which remained at approximately 20 nm and all CS-AgNPs were mostly spherical. The zeta potential measurements indicated that the surface of CS-AgNPs carries a positive charge. Notably, elevating the chitosan concentration led to a more pronounced antibacterial impact, particularly evident in its interaction with the peptidoglycan layer on the bacterial surface. Our experimental results undeniably establish the potent antibacterial efficacy of CS-AgNPs against both Escherichia coli and Staphylococcus aureus. Employing live/dead bacterial staining, we reveal the marked capability of CS-AgNPs to effectively hinder bacterial proliferation. Furthermore, our experimental investigations revealed that CS-AgNPs possess broad-spectrum antimicrobial activity. The results of in vitro cytotoxicity experiments substantiated the high biocompatibility of CS-AgNPs with elevated chitosan loading. The study provides valuable insights into the development of nano-antibacterial agents that exhibit significant potential as a substitute to replace traditional antibiotics for medical applications.
Asunto(s)
Quitosano , Nanopartículas del Metal , Humanos , Plata/farmacología , Plata/química , Nanopartículas del Metal/química , Quitosano/farmacología , Quitosano/química , Antibacterianos/farmacología , Antibacterianos/química , Staphylococcus aureus , Escherichia coli , Pruebas de Sensibilidad MicrobianaRESUMEN
Food packaging films play a vital role in preserving and protecting food. However, due to their non-biodegradability, conventional packaging materials have led to significant environmental pollution. To overcome this hurdle, we have developed safe, innovative, sustainable and biodegradable packaging materials that can effectively extend the shelf life of food. In this study, two types of cellulose materials cellulose nanofibers (CNF) and carboxymethyl cellulose (CMC) with complementary roles were combined to prepare nanocellulose composite films with high transparency (90.3 %) of a certain thickness (30 ± 0.019 µm) by solution casting method, and their mechanical properties were further optimized by the addition of plasticizer-glycerol (Gly) and cross-linking agent-glutaraldehyde (GA), so as to maintain the strong tensile strength (≈112.60 MPa) and better malleability (4.12 %). In addition, we loaded the natural active agent tea polyphenols (TPs) with different concentrations to study the inhibition effect on E.coli and S.aureus and to simulate food packaging. Finally, we also found that the synthesized nanocellulose composite films can also achieve rapid degradation in a short time through soil burial, water flushing and immersion. The excellent performance demonstrated in this study provides reference value for further replacing petroleum-based materials with biomass materials in the field of food packaging.
Asunto(s)
Antibacterianos , Embalaje de Alimentos , Embalaje de Alimentos/métodos , Antibacterianos/farmacología , Agua , Glutaral , CelulosaRESUMEN
Background: Hypertension is a major public health problem, and its resulting other cardiovascular diseases are the leading cause of death worldwide. In this study, we constructed a convenient and high-performance hypertension risk prediction model to assist in clinical diagnosis and explore other important influencing factors. Methods: We included 8,073 people from NHANES (2017-March 2020), using their 120 features to form the original dataset. After data pre-processing, we removed several redundant features through LASSO regression and correlation analysis. Thirteen commonly used machine learning methods were used to construct prediction models, and then, the methods with better performance were coupled with recursive feature elimination to determine the optimal feature subset. After data balancing through SMOTE, we integrated these better-performing learners to construct a fusion model based for predicting hypertension risk on stacking strategy. In addition, to explore the relationship between serum ferritin and the risk of hypertension, we performed a univariate analysis and divided it into four level groups (Q1 to Q4) by quartiles, with the lowest level group (Q1) as the reference, and performed multiple logistic regression analysis and trend analysis. Results: The optimal feature subsets were: age, BMI, waist, SBP, DBP, Cre, UACR, serum ferritin, HbA1C, and doctors recommend reducing salt intake. Compared to other machine learning models, the constructed fusion model showed better predictive performance with precision, accuracy, recall, F1 value and AUC of 0.871, 0.873, 0.871, 0.869 and 0.966, respectively. For the analysis of the relationship between serum ferritin and hypertension, after controlling for all co-variates, OR and 95% CI from Q2 to Q4, compared to Q1, were 1.396 (1.176-1.658), 1.499 (1.254-1.791), and 1.645 (1.360-1.989), respectively, with P < 0.01 and P for trend <0.001. Conclusion: The hypertension risk prediction model developed in this study is efficient in predicting hypertension with only 10 low-cost and easily accessible features, which is cost-effective in assisting clinical diagnosis. We also found a trend correlation between serum ferritin levels and the risk of hypertension.
RESUMEN
PURPOSE: To compare the root canal morphology of mandibular incisors by using cone-beam CT (CBCT) and canal staining and clearing technique. METHODS: Sixty-one extracted mandibular incisors with complete dental root and apex which received no endodontic treatment and no post crown restoration were selected. Each tooth was radiographed with CBCT, and the root canal system was stained by canal staining and clearing technique. The consistency of the number of root canal, root canal Vertucci type of mandibular permanent incisors between the two methods were compared, and the differences of the detection rate on root canal branch structure between the two methods were analyzed. The results were statistically analyzed with SPSS 17.0 software package. RESULTS: The Kappa value of single and double root canal types between CBCT and canal staining and clearing technique was 0.847 (P<0.001). The Kappa value of Vertucci root canal types between CBCT and canal staining and clearing technique was 0.861 (P<0.001). The detection rates of root canal branch structure were 8.19% and 22.95%, respectively, with significant difference between the two methods (P=0.025). The canal staining and clearing technique was significantly better than CBCT in detection of root canal branch structure. CONCLUSIONS: CBCT can reflect the root canal types nearly perfectly, but inferior to canal staining and clearing technique in detection of root canal branch structure, CBCT is a relatively accurate clinical diagnosis tool of root canal morphology.
Asunto(s)
Tomografía Computarizada de Haz Cónico , Cavidad Pulpar/anatomía & histología , Incisivo/anatomía & histología , Atención Odontológica , Humanos , Mandíbula , Raíces de Plantas , Tratamiento del Conducto Radicular , Coloración y Etiquetado , Raíz del DienteRESUMEN
To analyze the incidence of instrument separation (IS) and the factors influencing it, when associated with Mtwo rotary system (VDW, Munich, Germany) during endodontic therapy. A retrospective study involving a total of 24,108 root canals (11,036 endodontic treated teeth) was conducted at Nanjing Stomatology Hospital between January 2011 and March 2013. The information included were tooth type, root canal curvature, number of fractured instruments, length of the separated fragments, and the distance from broken tip to apex. The incidence of IS was observed to be 2.2 % according to the number of teeth and 1.0 % according to the number of root canals. Many of the separated fragments were 2-4 mm in length and the mean length was 3.07 ± 1.46 mm, and 78.4 % of fractures occurred in the apex. The mean length of separated fragments in severely curved canals was maximum, while ultra-severe curved canals was observed to be minimum. Mtwo instruments demonstrated an extremely low fracture rate during endodontic therapy. Molar teeth (especially lower molars) and the degree of canal curvature had a significant effect on the incidence of IS.
Asunto(s)
Instrumentos Dentales , Cavidad Pulpar/cirugía , Análisis de Falla de Equipo , Rotación , Cavidad Pulpar/anatomía & histología , Humanos , Estudios Retrospectivos , Ápice del Diente/anatomía & histología , Ápice del Diente/cirugíaRESUMEN
PURPOSE: To compare the cytotoxicity of 5 different dental bonding agents to human periodontal ligament cells(HPDLCs). METHODS: Primary cultured HPDLCs were exposed to different concentrations (100%,50% and 25%) of Super Bond, Clearfil SE Bond, G-Bond, Single Bond2, and Adper Easy One for different times (24 h, 48 h and 72 h). Cytotoxicity of 5 different agents to HPDLCs were observed by MTT method. The data was analyzed using SPSS 19.0 software package. RESULTS: Cytotoxicity of 5 dentin bonding agents to HPDLCs were Super Bond
Asunto(s)
Recubrimiento Dental Adhesivo , Dentina , Compuestos de Boro , Recubrimientos Dentinarios , Humanos , Metacrilatos , Metilmetacrilatos , Ligamento Periodontal , Cementos de ResinaRESUMEN
OBJECTIVE: To investigate the mandibular bone mineral density (BMD) change of senile osteoporosis patients and the relationship between the mandible bone loss and systemic bone loss. METHODS: Forty senile osteoporotic patients (group A), 40 non-osteoporosis control elders (group B) and 40 healthy youths (group C) were included in this study. Standard digital panoramic tomography (SDPTG) was taken for each participant. Cortical width (CW), panoramic mandibular index (PMI), alveolar bone density and alveolar bone height were measured on the SDPTG. Lumbar and hip BMD were measured with dual energy X-ray absorptiometry (DXA). RESULTS: Close relationship was found between CW (3.57 +/- 0.82) and systemic BMD for osteoporosis patients (P < 0.05). All the SDPTG indices including CW, PMI, alveolar bone density and alveolar bone height were different for osteoporosis patients from the healthy youths (P < 0.05). The osteoporosis patients had thinner CW (3.57 +/- 0.82) and smaller PMI (0.29 +/- 0.06) than non-osteoporosis control elders (CW: 4.07 +/- 0.75, PMI: 0.32 +/- 0.07, P < 0.05). The alveolar bone density (105.40 +/- 20.48) and alveolar bone height (10.42 +/- 1.82) of the non-osteoporosis control elders reduced compared with the healthy youths (alveolar bone density: 117.10 +/- 22.23, alveolar bone height: 11.69 +/- 1.63, P < 0.05). CONCLUSIONS: The senile osteoporotic patients had significant mandibular cortical bone loss.
Asunto(s)
Densidad Ósea , Mandíbula/diagnóstico por imagen , Osteoporosis Posmenopáusica/diagnóstico por imagen , Osteoporosis/diagnóstico por imagen , Absorciometría de Fotón , Anciano , Anciano de 80 o más Años , Pérdida de Hueso Alveolar/diagnóstico por imagen , Pérdida de Hueso Alveolar/patología , Índice de Masa Corporal , Femenino , Humanos , Masculino , Mandíbula/patología , Persona de Mediana Edad , Osteoporosis/patología , Osteoporosis Posmenopáusica/patología , Radiografía PanorámicaRESUMEN
OBJECTIVE: To compare the mandibular indices differences between periodontitis and non-periodontitis subjects by digital panoramic tomograms in order to find a simple and effective method to evaluate the density of alveolar bone and study the relativity between local bone loss and systemic bone loss. METHODS: Standard digital panoramic tomograms of sixty periodontitis subjects and sixty non-periodontitis subjects were taken. Density and height cortical width (CW) and panoramic mandibular index (PMI) of alveolar bone were measured on the digital panoramic tomograms. SPSS 12.0 was used for statistics analyses. RESULTS: The periodontitis subjects had lower height of alveolar bone (8.76 mm vs. 11.85 mm, P=0.000), lower density of alveolar bone (106.08 vs. 113.33, P=0.034), thinner cortical width (3.80 mm vs. 4.27 mm, P=0.008), while the difference of PMI between the two groups was not significant (P>0.05). The relativity between both density and height of alveolar bone with CW was significant (P<0.05), but not significant with PMI (P>0.05). CONCLUSION: The optical method is a simple and effective method to measure the density of the alveolar bone. Compared with the non-periodontitis subjects, the periodontitis subjects not only have alveolar bone changed significantly but also have thinner cortical width.