Microporous Metal-Phosphonates with a Novel Orthogonalized Linker and Complementary Guests: Insights for Trivalent Metal Complexes from Divalent Metal Complexes.

The reliable self-assembly of microporous metal-phosphonate materials remains a longstanding challenge. This stems from, generally, more coordination modes for the functional group allowing more dense structures, and stronger bonding driving less crystalline products. Here, a novel orthogonalized aryl-phosphonate linker, 1,3,5-tris(4'-phosphono-2',6'-dimethylphenyl) benzene (H6 L3) has been used to direct formation of open frameworks. The peripheral aryl rings of H6 L3 are orthogonalized relative to the central aromatic ring giving a tri-cleft conformation of the linker in which small aromatic molecules can readily associate. When coordinated to magnesium ions, a series of porous crystalline metal-organic, and hydrogen-bonded metal-organic frameworks (MOFs, HMOFs) are formed (CALF-41 (Mg), HCALF-42 (Mg), -43 (Mg)). While most metal-organic frameworks are tailored based on choice of metal and linker, here, the network structures are highly dependent on the inclusion and structure of the guest aromatic compounds. Larger guests, and a higher stoichiometry of metal, result in increased solvation of the metal ion, resulting in networks with connectivities increasingly involving hydrogen-bonds rather than direct phosphonate coordination. Upon thermal activation and aromatic template removal, the materials exhibit surface areas ranging from 400-600 m2 /g. Self-assembly in the absence of aromatic guests yields mixtures of phases, frequently co-producing a dense 3-fold interpenetrated structure (1). Interestingly, a series of both more porous (530-900 m2 /g), and more robust solids is formed by complexing with trivalent metal ions (Al, Ga, In) with aromatic guest; however, these are only attainable as microcrystalline powders. The polyprotic nature of phosphonate linkers enables structural analogy to the divalent analogues and these are identified as CALF-41 analogues. Finally, insights to the structural transformations during metal ion desolvation in this family are gained by considering a pair of structurally related Co materials, whose hydrogen-bonded (HCALF-44 (Co)) and desolvated (CALF-44 (Co)) coordination bonded networks were fully structurally characterized.

Orthogonalization of Polyaryl Linkers as a Route to More Porous Phosphonate Metal-Organic Frameworks.

The coordinative pliancy of the phosphonate functional group means that metal-phosphonate materials often self-assemble as well-packed structures with minimal porosity, as efficient inter-ligand packing is enabled. Here, we report a multistep synthesis of a novel aryl-phosphonate linker with an orthogonalized ligand core, 1,3,5-tris(4'-phosphonophenyl)-2,4,6-trimethylbenzene (H6 L2) designed to form more open structures. A series of crystalline metal-phosphonate frameworks (CALF-35 to -39) have been assembled by coordinating to divalent metals (Ba, Sr, Ca, Mg, Zn). H6 L2 is unable to pack efficiently and, as a consequence, yields several distinct microporous structures. The resulting structures are discussed in detail, with a focus on the solid-state packing of the sterically rigidified linker. Combined with larger cations (Sr, and Ba), H6 L2 packs in a parallel-offset manner, yielding isomorphous and microporous metal-organic frameworks (CALF-35 (Sr), and (Ba)). When coordinated to smaller metals (Ca, Mg, Zn), H6 L2 forms four new structures. Two Ca MOFs of different stoichiometry, (CALF-36 and 37) and a Mg MOF CALF-38 show narrow pores and have high selectivities for CO2 over N2 and CH4 . Finally, in CALF-39 (Zn), H6 L2 linkers pack in a herringbone fashion, resulting in a material with 10.9×10.1 Å2 square channels. The stability of all structures was tested, and the most porous structure, CALF-39 (Zn), was found to retain its structure and gas adsorption after immersion in water over pH 3-11.

Regioselective Synthesis of C3-Hydroxyarylated Pyrazoles.

Pyrazoles are ubiquitous structures in medicinal chemistry. We report the first regioselective route to C3-hydroxyarylated pyrazoles obtained through reaction of pyrazole N-oxides with arynes using mild conditions. Importantly, this method does not require the C4 and C5 positions of the pyrazole to be functionalized to observe regioselectivity. Using this method, we completed the synthesis of a recently reported JAK 1/2 inhibitor. Our synthesis produces the desired product in 4 steps from commercially available starting materials.

A Mesoionic Carbene-Pyridine Bidentate Ligand That Improves Stability in Electrocatalytic CO2 Reduction by a Molecular Manganese Catalyst.

Tricarbonyl Group 7 complexes have a longstanding history as efficacious CO2 electroreduction catalysts. Typically, these complexes feature an auxiliary 2,2'-bipyridine ligand that assists in redox steps by delocalizing the electron density into the ligand orbitals. While this feature lends to an accessible redox potential for CO2 electroreduction, it also presents challenges for electrocatalysis with Mn because the electron density is removed from metal-ligand bonding orbitals. The results presented here thus introduce a mesoionic carbene (MIC) as a potent ligand platform to promote Mn-based electrocatalysis. The strong σ donation of the N,C-bidentate MIC is shown to help centralize the electron density on the Mn center while also maintaining relevant redox potentials for CO2 electroreduction. Mechanistic investigation supports catalytic turnover at two operative potentials separated by 400 mV. In the low operating potential regime at -1.54 V, Mn(0) species catalyze CO2 to CO and CO32-, which has a maximum rate of 7 ± 5 s-1 and is stable for up to 30.7 h. At higher operating potential at -1.94 V, "Mn(-1)" catalyzes CO2 to CO and H2O with faster turnovers of 200 ± 100 s-1, with the trade-off being less stability at 6.7 h. The relative stabilities of Mn complexes bearing MIC and 4,4'-di-tert-butyl-2,2'-bipyridine were compared by evaluation under the same electrolysis conditions and therefore elucidated that the MIC promotes longevity for CO evolution throughout a 5 h period.

Unexpected Formation and Potent Antioxidant Activity of Macrocyclic Dimers Containing Disulfide and Selenide Groups.

During attempts to prepare spirodithiaselenuranes as GPx mimetics, a series of unexpected dimeric macrocycles was obtained, each containing two selenide and two disulfide moieties in rings ranging from 18- to 26-membered. The products showed potent GPx-like activity in an NMR assay based on their ability to catalyze the reduction of hydrogen peroxide with benzyl thiol. The high catalytic activity was attributed to transannular effects during selenide to selenoxide oxidation. This redox process was also characterized by an induction period that indicated autocatalysis in the formation of an intermediate selenoxide from the oxidation of the corresponding selenide.

Spontaneous Ammonia Activation Through Coordination-Induced Bond Weakening in Molybdenum Complexes of a Dianionic Pentadentate Ligand Platform.

Ammonia oxidation catalyzed by molecular compounds is of current interest as a carbon-free source of dihydrogen. Activation of N-H bonds through coordination to transition metal centers is a key reaction in this process. We report the substantial activation of ammonia via reaction with low-valent molybdenum complexes of a diborate pentadentate ligand system. Spontaneous loss of dihydrogen from (B2 Pz4 Py)MoII -NH3 at room temperature to produce the dinuclear µ-nitrido compound (B2 Pz4 Py)Mo-N-Mo(B2 Pz4 Py) is observed due to substantial N-H bond weakening upon coordination to Mo. Mechanistic details are supported through the experimental observation/characterization of terminal amido, imido and nitrido complexes and density functional theory computations. The generally under-appreciated role of bridging nitrido intermediates is revealed and discussed, providing guidance for further catalyst development for this process.

Lowering Electrocatalytic CO2 Reduction Overpotential Using N-Annulated Perylene Diimide Rhenium Bipyridine Dyads with Variable Tether Length.

We report the design, synthesis, and characterization of four N-annulated perylene diimide (NPDI) functionalized rhenium bipyridine [Re(bpy)] supramolecular dyads. The Re(bpy) scaffold was connected to the NPDI chromophore either directly [Re(py-C0-NPDI)] or via an ethyl [Re(bpy-C2-NPDI)], butyl [Re(bpy-C4-NPDI)], or hexyl [Re(bpy-C6-NPDI)] alkyl-chain spacer. Upon electrochemical reduction in the presence of CO2 and a proton source, Re(bpy-C2/4/6-NPDI) all exhibited significant current enhancement effects, while Re(py-C0-NPDI) did not. During controlled potential electrolysis (CPE) experiments at Eappl = -1.8 V vs Fc+/0, Re(bpy-C2/4/6-NPDI) all achieved comparable activity (TONco ∼ 25) and Faradaic efficiency (FEco ∼ 94%). Under identical CPE conditions, the standard catalyst Re(dmbpy) was inactive for electrocatalytic CO2 reduction; only at Eappl = -2.1 V vs Fc+/0 could Re(dmbpy) achieve the same catalytic performance, representing a 300 mV lowering in overpotential for Re(bpy-C2/4/6-NPDI). At higher overpotentials, Re(bpy-C4/6-NPDI) both outperformed Re(bpy-C2-NPDI), indicating the possibility of coinciding electrocatalytic CO2 reduction mechanisms that are dictated by tether-length and overpotential. Using UV-vis-nearIR spectroelectrochemistry (SEC), FTIR SEC, and chemical reduction experiments, it was shown that the NPDI-moiety served as an electron-reservoir for Re(bpy), thereby allowing catalytic activity at lower overpotentials. Density functional theory studies probing the optimized geometries and frontier molecular orbitals of various catalytic intermediates revealed that the geometric configuration of NPDI relative to the Re(bpy)-moiety plays a critical role in accessing electrons from the electron-reservoir. The improved performance of Re(bpy-C2/4/6-NPDI)dyads at lower overpotentials, relative to Re(dmbpy), highlights the utility of chromophore electron-reservoirs as a method for lowering the overpotential for CO2 conversion.

One-Pot Synthesis of Aryl Selenonic Acids and Some Unexpected Byproducts.

The synthesis of aryl selenonic acids was achieved from diverse aryl bromides via a one-pot method involving metalation, selenation, and oxidation with hydrogen peroxide followed by ion exchange to afford the pure products in 77-90% yield. An o-hydroxymethyl derivative was found to dehydrate readily, affording the first example of a cyclic selenonic ester, while two minor byproducts were isolated and shown by X-ray crystallography to be mixed salts of aryl selenonic acids with either the corresponding aryl seleninic or selenious acid.

Side-on Coordination in Isostructural Nitrous Oxide and Carbon Dioxide Complexes of Nickel.

A nickel complex incorporating an N2 O ligand with a rare η2 -N,N'-coordination mode was isolated and characterized by X-ray crystallography, as well as by IR and solid-state NMR spectroscopy augmented by 15 N-labeling experiments. The isoelectronic nickel CO2 complex reported for comparison features a very similar solid-state structure. Computational studies revealed that η2 -N2 O binds to nickel slightly stronger than η2 -CO2 in this case, and comparably to or slightly stronger than η2 -CO2 to transition metals in general. Comparable transition-state energies for the formation of isomeric η2 -N,N'- and η2 -N,O-complexes, and a negligible activation barrier for the decomposition of the latter likely account for the limited stability of the N2 O complex.

The Unexpected Role of SeVI Species in Epoxidations with Benzeneseleninic Acid and Hydrogen Peroxide.

Benzeneperoxyseleninic acid has been proposed as the key intermediate in the widely used epoxidation of alkenes with benzeneseleninic acid and hydrogen peroxide. However, it reacts sluggishly with cyclooctene and instead rapidly decomposes in solution to a mixed selenonium-selenonate salt that was identified by X-ray absorption and 77 Se NMR spectroscopy, as well as by single crystal X-ray diffraction. This process includes a selenoxide elimination of the peroxyseleninic acid with liberation of oxygen and additional redox steps. The salt is relatively stable in the solid state, but generates the corresponding selenonic acid in the presence of hydrogen peroxide. The selenonic acid is inert towards cyclooctene on its own; however, rapid epoxidation occurs when hydrogen peroxide is added. This shows that the selenonic acid must first be activated through further oxidation, presumably to the heretofore unknown benzeneperoxyselenonic acid. The latter is the principal oxidant in this epoxidation.

Three Sequential Hydrolysis Products of the Ubiquitous Cu24 Isophthalate Metal-Organic Polyhedra.

Metal-organic polyhedra (MOPs) are increasingly studied as host-guest capsules, linked into networks, or incorporated into composite materials. As such, understanding the decomposition of MOP structures is of fundamental importance. The degradation of the ubiquitous copper(II) MOP Cu24[5-(hydroxy)isophthalate]24 (1) is studied in liquid water. At different intervals of water exposure, powder X-ray diffraction (PXRD) is performed and stepwise conversion of the MOP into three different coordination polymers is observed. First, the formation of a 2D coordination polymer, 2, is observed, which upon further exposure gives a 1D coordination polymer, 3, and finally a trinuclear copper(II) complex, 4. Compound 2 is characterized by PXRD owing to its transient nature, while 3 and 4 are characterized crystallographically. The final structure, 4, contains copper(II) trimers, and so its magnetic behavior is also investigated.

Achieving Superprotonic Conduction in Metal-Organic Frameworks through Iterative Design Advances.

Two complementary design strategies, isomorphous ligand replacement and heterocycle doping, have been applied to iteratively enhance the proton conductivity of a metal-organic framework, ß-PCMOF2. The resulting materials, PCMOF21/2(Pz) and PCMOF21/2(Tz) (Pz = 1H-pyrazole, Tz = 1H-1,2,4-triazole), have their proton conduction raised almost 2 orders of magnitude compared to ß-PCMOF2. The bulk conductivities of these materials are over 10-1 S cm-1 at 85 °C and 90% relative humidity (RH), while maintaining the parent MOF structure. A solid state synthetic route for doping 1-D channels is also presented.

Microsphere Assemblies via Phosphonate Monoester Coordination Chemistry.

By complexing a bent phosphonate monoester ligand with cobalt(II), coupled with in situ ester hydrolysis, coordination microspheres (CALS=CALgary Sphere) are formed whereas the use of the phosphonic acid directly resulted in a sheet-like structure. Manipulation of the synthetic conditions gave spheres with different sizes, mechanical stabilities, and porosities. Time-dependent studies determined that the sphere formation likely occurred through the formation of a Co2+ and ligand chain that propagates in three dimensions through different sets of interactions. The relative rates of these assembly processes versus annealing by ester hydrolysis and metal dehydration determine the growth of the microspheres. Hardness testing by nanoindentation is carried out on the spheres and sheets. Notably, no templates or capping agents are employed, the growth of the spheres is intrinsic to the ligand geometry and the coordination chemistry of cobalt(II) and the phosphonate monoester.

Methionine Binding to Dirhodium(II) Tetraacetate.

The reaction between antitumor active dirhodium(II) tetraacetate and dl-methionine (HMet) was followed in aqueous solution and showed initially mixtures of 1:1 and 1:2 adducts [Rh2(AcO)4(HMet)(H2O)] (AcO- = CH3COO-) and [Rh2(AcO)4(HMet)2] formed at room temperature (RT), as evidenced by UV-vis spectroscopy and electrospray ionization mass spectrometry (ESI-MS). Rh K-edge extended X-ray absorption fine structure (EXAFS) spectroscopy confirmed methionine thioether binding to the axial positions of the Rh2(AcO)4 cage structure. With excess HMet at RT, stepwise displacement of the acetate groups was observed after some time using ESI-MS. Heating the solution to 40° for 24 h accelerated the substitution reaction leading to stable dirhodium(II) species with two acetate ligands displaced by two methionine groups. The crystal structure of the purple [RhII2(AcO)2(d-Met)(l-Met)]·6H2O compound obtained from the solution revealed tridentate coordination of the methionine ligands to the Rh(II) ions, with the thioether S atoms in equatorial positions. A minor amount of a light orange monomeric [RhIII(Met)2](AcO) complex also formed in the solution was isolated by size exclusion chromatography and identified by ESI-MS. Crystals of [RhIII(d-Met)(l-Met)]Cl·3H2O were prepared by reacting RhCl3 and dl-HMet. The crystal structure showed tridentate binding of the methionine ligands to the Rh(III) ion in a trans-S, N, O arrangement.

Tuning Intrinsic and Extrinsic Proton Conduction in Metal-Organic Frameworks by the Lanthanide Contraction.

Seven isomorphous lanthanide metal-organic frameworks in the PCMOF-5 family, [Ln(H5L)(H2O)n](H2O) (L = 1,2,4,5-tetrakis(phosphonomethyl)benzene, Ln = La, Ce, Pr, Nd, Sm, Eu, Gd) have been synthesized and characterized. This family contains 1-D water-filled channels lined with free hydrogen phosphonate groups and gives a very low activation energy pathway for proton transfer. The lanthanide contraction was employed to systematically vary the unit cell dimensions and tune the proton conducting pathways. LeBail fitting of the crystalline series shows that the crystallographic a-axis, along the channel, can be varied in increments less than 0.02 Å correspondingly shortening the proton transfer pathway. The proton conductivities for the La and Pr complexes were roughly an order of magnitude higher than other members of the series (10-3 S cm-1 versus 10-4 S cm-1). Single crystal structures of the high and low conducting members of the series (La, Pr for high and Ce for low) affirm the structural similarities extend beyond the unit cell parameters to positions of free acid groups and included water molecules. Scanning electron microscopy reveals marked differences in particle size of the different members of the Ln series owing to lattice strain effects induced by changing the lanthanide. Notably, the high conducting La and Pr complexes have the largest particle sizes. This result contradicts any notion that degradation of the MOF at grain boundaries is enabling the observed conductivity as proton conduction dominated by extrinsic pathways would be enabled by small particles (i.e., the La and Pr complexes would be the worst conductors). Proton conductivity measurements of a ball milled sample of the La complex corroborate this result.

Dithienophosphole-Based Phosphinamides with Intriguing Self-Assembly Behavior.

A new, highly adaptable type of phosphinamide-based hydrogen bonding is representatively demonstrated in π-conjugated phosphole materials. The rotational flexibility of these intermolecular P=O-H-N hydrogen bonds is demonstrated by X-ray crystallography and variable-concentration NMR spectroscopy. In addition to crystalline compounds, phosphinamide hydrogen bonding was successfully introduced into the self-assembly of soft crystals, liquid crystals, and organogels, thus highlighting the high general value of this type of interaction for the formation of organic soft materials.

Mediating Order and Modulating Porosity by Controlled Hydrolysis in a Phosphonate Monoester Metal-Organic Framework.

A crystalline and permanently porous copper phosphonate monoester framework has been synthesized from a tetraaryl trigonal phosphonate monoester linker. This material has a surface area over 1000 m2 g-1 , as measured by N2 sorption, the highest reported for a phosphonate-based metal-organic framework (MOF). The monoesters result in hydrophobic pore surfaces that give a low heat of adsorption for CO2 and low calculated selectivity for CO2 over N2 and CH4 in binary mixtures. By careful manipulation of synthetic conditions, it is possible to selectively remove some of the monoesters lining the pore to form a hydrogen phosphonate while giving an isomorphous structure. This increases the affinity of the framework for CO2 giving higher ambient uptake, higher heat of adsorption, and much higher calculated selectivity for CO2 over both N2 and CH4 . Formation of the acid groups is noteworthy as complexation with the parent acid gives a different structure.

A Water Stable Magnesium MOF That Conducts Protons over 10(-2) S cm(-1).

From the outset of the study of MOFs as proton conductors, both conductivity and hydrolytic robustness of the materials have needed to be improved. Here, we report a layered magnesium carboxyphosphonate framework, PCMOF10, that shows an extremely high proton conductivity value of 3.55 × 10(-2) S·cm(-1) at 70 °C and 95% RH. Moreover, PCMOF10 is water stable owing to strong Mg phosphonate bonding. The 2,5-dicarboxy-1,4-benzenediphosphonic acid (H6L) linker anchors a robust backbone and has hydrogen phosphonate groups that interact with the lattice water to form an efficient proton transfer pathway.

Design of a humidity-stable metal-organic framework using a phosphonate monoester ligand.

Phosphonate monoesters are atypical linkers for metal-organic frameworks, but they offer potentially added versatility. In this work, a bulky isopropyl ester is used to direct the topology of a copper(II) network from a dense to an open framework, CALF-30. CALF-30 shows no adsorption of N2 or CH4 however, using CO2 sorption, CALF-30 was found to have a Langmuir surface area of over 300 m(2)/g and to be stable to conditions of 90% relative humidity at 353 K owing to kinetic shielding of the framework by the phosphonate ester.

Ruthenium polyhydrides supported by rigid PCP pincer ligands: dynamic behaviour and reactions with CO2.

Two rigid ß-elimination immune PCcarbeneP pincer ligands, differing in their electron donor properties by variation of the substitution pattern on the aromatic linker arms, were complexed to ruthenium to form the dichlorides LRRuCl2 (R = H or NMe2). These compounds were converted to hydrido chlorides by treatment with dihydrogen (H2) and a base. By converting to tert-butoxide derivatives in situ under an atmosphere of H2, the poly hydride PCalkylP complexes LHRRu(H)3 compounds were generated. In these complexes, H2 has added across the RuC bond in the PCcarbeneP starting materials. The polyhydrides are dynamic in solution and extensive NMR studies helped to elucidate the speciation and fluxional processes operative in this dynamic system. The polyhydride complexes react rapidly with CO2 to give the PCcarbeneP formato hydride complexes LRRu(H)-κ2-O2CH. For R = H, the 1,2-hydride shift from the anchoring alkyl of the PCalkylP carbon to the metal is reversible, but for R = NMe2 it is irreversible. The CO2 incorporated into the formato ligand of these compounds exchanges with free CO2via a bimolecular mechanism that is more rapid for R = NMe2 than for R = H; plausible explanations for this observation are proffered. Experiments designed to evaluate the efficacy of the R = NMe2 formato hydride complex as a catalyst precursor for CO2 hydrogenation to formate salts reveal poor performance in comparison to state-of-the-art ruthenium-based catalysts. This is due primarily to the precipitation of a dimeric µ-κ2-κ1-CO3 carbonate complex that is not an active catalyst for the reaction.