Construction of Hydration Layer for Proton Transport by Implanting the Hydrophilic Center Ag0 in Nickel Metal-Organic Frameworks.

The directional arrangement of H2O molecules can effectively regulate the ordered protons transfer to improve transport efficiency, which can be controlled by the interaction between materials and H2O. Herein, a strategy to build a stable hydration layer in metal-organic framework (MOF) platforms, in which hydrophilic centers that can manipulate H2O molecules are implanted into MOF cavities is presented. The rigid grid-Ni-MOF is selected as the supporting material due to the uniformly distributed cavities and rigid structures. The Ag0 possesses potential combination ability with the hydrophilic substances, so it is introduced into the MOF as hydration layer centers. Relying on the strong interaction between Ag0 and H2O, the H2O molecules can rearrange around Ag0 in the cavity, which is intuitively verified by DFT calculation and molecular dynamics simulation. The establishment of a hydration layer in Ag@Ni-MOF regulates the chemical properties of the material and gives the material excellent proton conduction performance, with a proton conductivity of 4.86 × 10-2 S cm-1.

Ingenious Modulation of Third-Order Nonlinear Optical Response of Zr-MOFs through Defect Engineering Based on a Mixed-Linker Strategy.

Defect engineering plays a pivotal role in regulating electronic structure and facilitating charge transfer, yielding captivating effects on third-order nonlinear optical (NLO) properties. In this work, we utilized a mixed-linker strategy to intentionally disrupt the initial periodic arrangement of UiO-66 and construct defects. Specifically, we incorporated tetrakis(4-carboxyphenyl)porphyrin (TCPP) with an exceptionally electron-rich delocalization system into the framework of UiO-66 using a one-pot solvothermal method, ingeniously occupying the partial distribution sites of the Zr6 clusters. Compared to UiO-66, the NLO absorption and refraction performance of TCPP/UiO-66 were significantly improved. Additionally, due to the presence of nitrogen-rich sites that can accommodate metal ions in the porphyrin ring of TCPP, Co(II), Ni(II), Cu(II), and Zn(II) are introduced into TCPP/UiO-66, extending the d-π conjugation effect to further regulate the defects. The NLO absorption behavior transforms saturation absorption (SA) to reverse saturation absorption (RSA), while the refraction behavior shifts from self-defocusing to self-focusing. This work shows that defects can effectively regulate the electronic structure, while TCPP plays a crucial role in significantly enhancing electron delocalization.

Third-Order Nonlinear Optical Modulation Behavior of Photoresponsive Bimetallic MOFs.

Bimetallic metal-organic frameworks (MOFs) capable of sensing external stimuli will provide more possibilities for further regulating third-order nonlinear optical (NLO) properties. In this work, we synthesized bimetallic MOFs (ZnCu-MOF and ZnCd-MOF) through central metal exchange using a photoresponsive Zn-MOF as a precursor. Compared with Zn-MOF, both ZnCu-MOF and ZnCd-MOF exhibit significantly enhanced third-order NLO absorption properties. This is mainly attributed to the introduction of metal ions with different electron configurations that can adjust the bandgap of MOFs and enhance electron delocalization, thus promoting electron transfer. Interestingly, the bimetallic MOFs show a transition from reverse saturation absorption (RSA) to saturation absorption (SA) after exposure to ultraviolet irradiation, as they retain the properties of directional photogenerated electron transfer. Photoresponsive bimetallic MOFs not only have the effect of bimetallic modulation of electronic structures but also have the characteristics of photoinduced electron transfer, exhibiting diversified optical properties. These findings provide a novel method for the development of multifunctional NLO materials.

Guest-Induced Multilevel Charge Transport Strategy for Developing Metal-Organic Frameworks to Boost Photocatalytic CO2 Reduction.

Encapsulating photogenerated charge-hopping nodes and space transport bridges within metal-organic frameworks (MOFs) is a promising method of boosting the photocatalytic performance. Herein, this work embeds electron transfer media (9,10-bis(4-pyridyl)anthracene (BPAN)) in MOF cavities to build multi-level electron transfer paths. The MOF cavities are accurately regulated to investigate the significance of the multi-level electron transfer paths in the process of CO2 photoreduction by evaluating the difference in the number of guest media. The prepared MOFs, {[Co(BPAN)(1,4-dicarboxybenzene)(H2 O)2 ]·BPAN·2H2 O} and {[Co(BPAN)2 (4,4'-biphenyldicarboxylic acid)2 (H2 O)2 ]·2BPAN·2H2 O} (denoted as BPAN-Co-1 and BPAN-Co-2), exhibit efficient visible-light-driven CO2 conversion properties. The CO photoreduction efficacy of BPAN-Co-2 (5598 µmol g-1  h-1 ) is superior to that of most reported MOF-based catalysts. In addition, the enhanced CO2 photoreduction ability is supported by density functional theory (DFT). This work illustrates the feasibility of realizing charge separation characteristics in MOF catalysts at the molecular level, and provides new insight for designing high-performance MOFs for artificial photosynthesis.

Rational Construction of Metal Organic Framework Hybrid Assemblies for Visible Light-Driven CO2 Conversion.

Photocatalytic reduction of CO2 to value-added chemicals is known to be a promising approach for CO2 conversion. The design and preparation of ideal photocatalysts for CO2 conversion are of pivotal significance for the sustainable development of the whole society. In this work, we integrated two functional organic linkers to prepare a novel metal organic framework (MOF) photocatalyst {[Co(9,10-bis(4-pyridyl)anthracene)0.5(bpda)]·4DMF} (Co-MOF). The existence of anthryl and amino groups leads to a wide range of visible light absorption and efficient separation of photogenerated electrons. To extend the lifetime of photogenerated electrons in the photocatalytic system, we modified Co-MOF particles onto g-C3N4. As expected, Co-MOF/g-C3N4 composites exhibited an ultrahigh selectivity (more than 97%) in the photocatalytic process, and the highest CO production rate (1824 µmol/g/h) was 7.1 and 27.2 times of Co-MOFs and g-C3N4, respectively. What's more, we also discussed the reaction mechanism of the Co-MOF/g-C3N4 photocatalytic CO2 reduction, and this work paves the pathway for designing photocatalysts with ideal CO2 reduction performance.

Efficient Strategy for Investigating the Third-Order Nonlinear Optical (NLO) Properties of Solid-State Coordination Polymers.

The investigation of third-order nonlinear optical (NLO) properties of coordination polymers (CPs) based on solid samples is very difficult but is crucial for practical applications. Herein, we show a method for preparing high optical quality CP films in a polymer matrix to study the third-order NLO performance of solid-state CPs. Two novel azobenzene-based CPs, [CdL(DMAc)(H2O)]n (1) and {[CuL(4,4'-azobpy)]·3H2O}n (2) (H2L = 5-((4-(phenyldiazenyl)phenoxy)methyl)isophthalic acid), were selected as study subjects. The corresponding microcrystals with a grain size of around 3 µm were doped into poly(vinyl alcohol) (PVA), forming CP films (1-MC/PVA and 2-MC/PVA). 1-MC/PVA and 2-MC/PVA exhibit NLO absorption switching behavior from saturable absorption (SA) to reverse saturable absorption (RSA) with increasing pulse energy. Moreover, their NLO properties can also be efficiently modulated by photostimulation energy due to the trans → cis isomerization of an azobenzene moiety. The density functional theory (DFT) results show that the narrower the band gap between the conduction band minimum and the valence band maximum, the denser the electron density distribution in the central mental and coordination atoms, which is beneficial to exhibit better third-order NLO performance. This work provides a feasible method for the wider practical application of solid materials with excellent third-order NLO performance.

Influence of a Substituted Methyl on the Photoresponsive Third-Order Nonlinear-Optical Properties Based on Azobenzene Metal Complexes.

For studying the effect of a substituted group on the photoresponsive third-order nonlinear-optical (NLO) properties, photosensitive azobenzene derivative H2L1 was first selected to construct metal complexes {[Zn2(L1)2(H2O)3]·2DMA)}n (1) and {[Cd(L1)(4,4'-bpy)H2O]·H2O}n (2). Then H2L2 with a substituted methyl on the azobenzene ring was used to construct complexes {[Zn(L2)(4,4'-bpy)(H2O)]}n (3) and {[Cd(L2)(4,4'-bpy)(H2O)]}n (4). When the azobenzene moiety of the complexes is trans, the NLO behaviors of the complexes are the same. However, after the azobenzene moiety is excited by ultraviolet (UV) light to change from trans to cis, the substituted methyl increases the repulsion between two azobenzene rings in 3 and 4, thereby affecting their NLO behaviors. Therefore, the nonlinearity of the two types of complexes is different after UV irradiation. Density functional theory calculations support this result. The substituted methyl has a significant influence on the nonlinear absorption behaviors of 3 and 4. This work not only reports the examples of photoresponsive NLO materials based on metal complexes but also provides a new idea to deeply explore NLO properties.

Unlocking the Remarkable Influence of Intramolecular Group Rotation for Third-order Nonlinear Optical Properties.

This work exposes for the first time the remarkable influence of intramolecular group rotation on third-order nonlinear optical (NLO) performance. In order to prove the role of group rotation, we designed and synthesized two photo-response compounds tetramethyl 5,5'-(((diazene-1,2-diylbis(4,1-phenylene))bis(oxy))bis(methylene))diisophthalate (1) and 5,5'-(((diazene-1,2-diylbis(4,1-phenylene))bis(oxy))bis(methylene))diisophthalic acid (2) and investigated their NLO performance under different substituent (benzyloxy group) rotation states. 1 and 2 have dynamic benzyloxy group rotation in dilute solution and shows reverse saturated absorption (RSA). When the benzyloxy group rotation of 1 and 2 was restricted by PMMA, their NLO performance not only converted into saturated absorption (SA) and NLO refraction behaviours, but also hardly changed after isomerization. Interestingly, we also restricted the benzyloxy group rotation in solution to a certain extent through photo-induced trans→cis isomerization, and found that the NLO performances of cis isomers of 1 and 2 exhibit SA and positive refraction and are similar to those of 1-PMMA and 2-PMMA. This work provides a new exploratory method for studying the influencing factors of third-order NLO performance.