RESUMEN
The hybrid technology of CO2 capture-mineral carbonation (CCMC) using alkaline streams has emerged in recent years. However, thus far, there has been no comprehensive study revealing the mechanisms of the simultaneous CCMC process regarding the choice of amine types and sensitivity of parameters. Combining with the analysis of multistep reaction mechanisms for different amines, we investigated a representative from each category in CCMC using calcium chloride to simulate the alkaline resource after leaching, i.e., primary (ethanolamine, MEA), secondary (diisopropanolamine, DIPA), tertiary (diethylethanolamine, DEAE), and triamine (diethylenetriamine, DETA), respectively. In the adsorption step, increasing the amine concentration beyond 2 mol/L reduced the absorption efficiency of DEAE due to the hydration mechanism, motivating a rational choice of concentration. In CCMC sections, when the amine concentration increased, only DEAE exhibited an increased carbonation efficiency of up to 100%, while DETA showed the lowest conversion. The carbonation of DEAE demonstrated the least sensitivity to temperature. The crystal transformation experiments suggested that over time, the produced vaterite could completely transform to calcite or aragonite, except those from DETA. Thus, with rationally chosen conditions, DEAE was demonstrated ideal for CCMC. These findings obtained in this work provided a theoretical foundation for designing future CCMC processes.
Asunto(s)
Aminas , Dióxido de Carbono , Dióxido de Carbono/química , DEET , Minerales , Carbonatos , Carbonato de Calcio/químicaRESUMEN
Ultrasound is a promising technology for the improvement of zeolite production, due to its beneficial effects on mass transfer and nucleation. However, a broad understanding of the sonication parameters that influence the growth of zeolites most is still lacking. In the present work, zeolite A was synthesized and the kinetic model of Gualtieri was used to obtain information about the crystallization parameters. The effect of the sonication power and duration on the relative crystallinity and particle size distribution were investigated using a Langevin-type transducer operating at 40 kHz. The experimental data shows that ultrasound has a significant effect on the nucleation and growth. With that, a reduction of up to 40 % of the initial synthesis time can be achieved. Additionally, a narrower particle size distribution is achieved when ultrasound is used during the zeolite A synthesis.
RESUMEN
The search for sustainable alternatives for use in chemical synthesis and catalysis has found an ally in non-conventional energy sources and widely available green solvents. The use of glycerol, an abundant natural solvent, as an excellent "sacrificial" hydrogen source for the copper-catalyzed microwave (MW)-promoted transfer hydrogenation of nitrobenzene to aniline has been investigated in this work. Copper nanoparticles (CuNPs) were prepared in glycerol and the efficacy of the glycerol layer in mediating the interaction between the metal active sites has been examined using HRTEM analyses. Its high polarity, low vapor pressure, long relaxation time, and high acoustic impedance mean that excellent results were also obtained when the reaction media was subjected to ultrasound (US) and MW irradiation. US has been shown to play an important role in the process via its ability to enhance CuNPs dispersion, favor mechanical depassivation and increase catalytic active surface area, while MW irradiation shortened the reaction time from some hours to a few minutes. These synergistic combinations promoted the exhaustive reduction of nitrobenzene to aniline and facilitated the scale-up of the protocol for its optimized use in industrial MW reactors.