RESUMEN
Small molecule photoswitches capable of toggling between two distinct molecular states in response to light are versatile tools to monitor biological processes, control photochemistry, and design smart materials. In this work, six novel dicyanorhodanine-based pyrrole-containing photoswitches are reported. The molecular design avails both the Z and E isomers from synthesis, where each can be isolated using chromatographic techniques. Inter- and intramolecular hydrogen bonding (H-bonding) interactions available to the E and Z isomers, respectively, uniquely impart thermal stability to each isomer over long time periods. Photoisomerization could be assessed by solution NMR and UV-vis spectroscopic techniques along with complementary ground- and excited-state computational studies, which show good agreement. Quantitative E â Z isomerization occurs upon 523 nm irradiation of the parent compound (where R = H) in solution, whereas Z â E isomerization using 404 nm irradiation offers a photostationary state (PSS) ratio of 84/16 (E/Z). Extending the π-conjugation of the pyrrole unit (where R = p-C6H4-OMe) pushes the maximum absorption to the yellow-orange region of the visible spectrum and allows bidirectional quantitative isomerization with 404 and 595 nm excitation. Comparator molecules have been prepared to report how the presence or absence of H-bonding affects the photoswitching behavior. Finally, studies of the photoswitches in neat films and photoinactive polymer matrices reveal distinctive structural and optical properties of the Z and E isomers and ultimately afford reversible photoswitching to spectrally unique PSSs using visible light sources including the Sun.
RESUMEN
Reactions between tungsten alkylidyne [tBuOCO]W≡CtBu(THF)2 1 and sulfur containing small molecules are reported. Complex 1 reacts with CS2 to produce intermediate η2 bound CS2 complex [O2C(tBuCâ)W(η2-(S,C)-CS2)(THF)] 8. Heating complex 8 provides a mixture of a monomeric tungsten sulfido complex 9 and a dimeric complex 10 in a 4:1 ratio, respectively. Heating the mixture does not perturb the ratio. Addition of excess THF in a solution of 9 and 10 (4:1) converts 10 to 9 (>96%) with concomitant loss of (CS)x. Both 9 and 10 can be selectively crystallized from the mixture. An alternative synthesis of exclusively monomeric 9 involves the reaction between 1 and PhNCS. Demonstrating ring expansion metathesis polymerization (REMP), tethered tungsten alkylidene 8 polymerizes norbornene to produce cis-selective syndiotactic cyclic polynorbornene (c-poly(NBE)).
RESUMEN
A new strategy to access α-functionalized alicyclic amines via their corresponding imine-BF3 complexes is reported. Isolable imine-BF3 complexes, readily prepared via dehydrohalogenation of N-bromoamines in a base-promoted/18-crown-6 catalyzed process followed by addition of boron trifluoride etherate, undergo reactions with a wide range of organometallic nucleophiles to afford α-functionalized azacycles. Organozinc and organomagnesium nucleophiles add at ambient temperatures, obviating the need for cryogenic conditions. In situ preparation of imine-BF3 complexes provides access to α-functionalized morpholines and piperazines directly from their parent amines in a single operation. α-Functionalized morpholines can be elaborated further, for instance by installing a second substituent in the α'-position.
RESUMEN
The synthesis, characterization, and preliminary activity of an unprecedented tethered alkylidyne tungsten complex for ring expansion alkyne metathesis polymerization (REAMP) are reported. The tethered alkylidyne 7 is generated rapidly by combining alkylidyne W(CtBu)(CH2tBu)(O-2,6-i-Pr2C6H3)2 (6) with 1 equiv of an yne-ol proligand (5). Characterized by NMR studies and nuclear Overhauser effect spectroscopy, complex 7 is a dimer. Each metal center contains a tungsten-carbon triple bond tethered to the metal center via an alkoxide ligand. The polymerization of the strained cycloalkyne 3,8-didodecyloxy-5,6-dihydro-11,12-didehydrodibenzo[a,e]-[8]annulene, 8, to generate cyclic polymers was demonstrated. Size exclusion chromatography (SEC) and intrinsic viscosity (η) measurements confirm the polymer's cyclic topology.
RESUMEN
Biosynthetic modifications of the 6/10-bicyclic hydrocarbon skeletons of the eunicellane family of diterpenoids are unknown. We explored the biosynthesis of a bacterial trans-eunicellane natural product, albireticulone A (3), and identified a novel isomerase that catalyzes cryptic isomerization in the biosynthetic pathway. We also assigned functions of two cytochromes P450 that oxidize the eunicellane skeleton, one of which was a naturally evolved non-functional P450 that, when genetically repaired, catalyzes allylic oxidation. Finally, we described the chemical susceptibility of the trans-eunicellane skeleton to undergo Cope rearrangement to yield inseparable atropisomers.
Asunto(s)
Sistema Enzimático del Citocromo P-450 , Diterpenos , Isomerismo , Sistema Enzimático del Citocromo P-450/metabolismo , Diterpenos/metabolismo , Oxidación-Reducción , Bacterias/metabolismoRESUMEN
The resorcinol-terpene phytocannabinoid template is a privileged scaffold for the development of diverse therapeutics targeting the endocannabinoid system. Axially chiral cannabinols (axCBNs) are unnatural cannabinols (CBNs) that bear an additional C10 substituent, which twists the cannabinol biaryl framework out of planarity creating an axis of chirality. This unique structural modification is hypothesized to enhance both the physical and biological properties of cannabinoid ligands, thus ushering in the next generation of endocannabinoid system chemical probes and cannabinoid-inspired leads for drug development. In this full report, we describe the philosophy guiding the design of axCBNs as well as several synthetic strategies for their construction. We also introduce a second class of axially chiral cannabinoids inspired by cannabidiol (CBD), termed axially chiral cannabidiols (axCBDs). Finally, we provide an analysis of axially chiral cannabinoid (axCannabinoid) atropisomerism, which spans two classes (class 1 and 3 atropisomers), and provide first evidence that axCannabinoids retainâand in some cases, strengthenâaffinity and functional activity at cannabinoid receptors. Together, these findings present a promising new direction for the design of novel cannabinoid ligands for drug discovery and exploration of the complex endocannabinoid system.
Asunto(s)
Cannabidiol , Cannabinoides , Endocannabinoides , Receptores de Cannabinoides , Ligandos , CannabinolRESUMEN
Water solubility measurements are required in drug discovery, in toxicological or environmental studies, and in developing industrial processes which employ extractions or crystallizations. The gold-standard shake-flask method is tedious and takes at least 24 h. We developed a nuclear magnetic resonance (NMR) method for automation, which has the same accuracy and solubility range as the shake-flask method, but a measurement can be made faster, since the analysis does not require separation of the phases. Samples of saturated solutions are analyzed in the presence of excess solute, since the NMR spectra do not show signals for the dispersed solids, and they tend to show separate signals for the dissolved and dispersed liquids. Spectra are acquired with water suppression, using a pulse sequence appropriate for quantitation. A sample of water is used as the external reference, and the concentration of the solute is determined using the PULCON relationship. An evaluation of the method in terms of selectivity, accuracy, precision, and limit of quantitation is presented in detail.
RESUMEN
The reactivity of phosphaalkynes, the isolobal and isoelectronic congeners to alkynes, with metal alkylidyne complexes is explored in this work. Treating the tungsten alkylidyne [t BuOCO]W≡Ct Bu(THF)2 (1) with phosphaalkyne (10) results in the formation of [O2 C(t BuC=)W{η2 -(P,C)-P≡C-Ad}(THF)] (13-t BuTHF ) and [O2 C(AdC=)W{η2 -(P,C)-P≡C-t Bu}(THF)] (13-AdTHF ); derived from the formal reductive migratory insertion of the alkylidyne moiety into a W-Carene bond. Analogous to alkyne metathesis, a stable phosphametallacyclobutadiene complex [t BuOCO]W[κ2 -C(t Bu)PC(Ad)] (14) forms upon loss of THF from the coordination sphere of either 13-t BuTHF or 13-AdTHF . Remarkably, the C-C bonds reversibly form/cleave with the addition or removal of THF from the coordination sphere of the formal tungsten(VI) metal center, permitting unprecedented control over the transformation of a tetraanionic pincer to a trianionic pincer and back. Computational analysis offers thermodynamic and electronic reasoning for the reversible equilibrium between 13-t Bu/AdTHF and 14.
RESUMEN
This work outlines an approach to creating a catalyst for cyclic polymer synthesis using readily available materials in only one or two steps. Combining commercially available molybdenum-alkylidene 1 with two equivalents of ene-ol proligand 2 rapidly produces, in quantitative yield (1H NMR spectroscopy), the double tethered metallacyclobutane complex 3. Characterized by variable temperature NMR studies and nuclear Overhauser effect spectroscopy (NOESY) experiments, complex 3 exhibits fluxional behavior in solution. Determined by single crystal X-ray diffraction, the solid-state structure of complex 3 reveals metrical parameters indicating that the metallacyclobutane is not predicted to undergo rapid retro-cycloaddition. However, complex 3 is a precatalyst for the polymerization of norbornene to produce cyclic polynorbornene. An NMR spectrum of a test polymerization indicates that only a small fraction of the precatalyst is activated upon exposure to monomer. Quantifying the active catalyst is possible by measuring vinyl resonances that appear in the 1H NMR spectrum. The vinyl resonances are attributable to the release of one of the tethers upon norbornene addition. Confirmation of the polymer cyclic topology comes from gel permeation chromatography (GPC), dynamic light scattering (DLS), and intrinsic viscosity (η) measurements. The double tethered metallacyclobutane complex is a novel design for catalytic cyclic polymer synthesis. The synthetic approach suggests that catalyst tuning is possible by a choice of the commercial alkylidene and alteration of the ene-ol proligand.
Asunto(s)
NorbornanosRESUMEN
This report describes an approach for preparing tethered tungsten-imido alkylidene complexes featuring a tetra-anionic pincer ligand. Treating the tungsten alkylidyne [tBuOCO]W≡CtBu(THF)2 (1) with isocyanates (RNCO; R = tBu, Cy, and Ph) leads to cycloaddition occurring exclusively at the CâN bond to generate the tethered tungsten-imido alkylidenes (6-NR). Unanticipated intermediates reveal themselves, including the discovery of [(O2CtBuCâ)W(η2-(N,C)-RNCO)(THF)] (11-R) and an unprecedented decarbonylation product [(tBuOCO)W(≡NR)(tBuCCO)] (14-R), on the pathway to the formation of 6-NR. Complex 11-R is kinetically stable for sterically bulky isocyanate R = tBu (11-tBu) and is isolated and characterized by single-crystal X-ray diffraction. Finally, adding to the short list of catalysts capable of ring expansion metathesis polymerization (REMP), complexes 6-NR and 11-tBu are active for the stereoselective synthesis of cyclic polynorbornene.
Asunto(s)
Alquenos/química , Complejos de Coordinación/química , Plásticos/síntesis química , Tungsteno/química , Catálisis , Complejos de Coordinación/síntesis química , Cristalografía por Rayos X , Modelos Moleculares , Estructura Molecular , Plásticos/química , EstereoisomerismoRESUMEN
ß-Amino esters are obtained with high levels of enantioselectivity via the conjugate addition of cyclic amines to unactivated α,ß-unsaturated esters. A related strategy enables the kinetic resolution of racemic cyclic 2-arylamines, using benzyl acrylate as the resolving agent. Reactions are facilitated by an unprecedented selenourea-thiourea organocatalyst. As elucidated by DFT calculations and 13C kinetic isotope effect studies, the rate-limiting and enantiodetermining step of the reaction is the protonation of a zwitterionic intermediate by the catalyst. This represents a rare case in which a thiourea compound functions as an asymmetric Brønsted acid catalyst.
Asunto(s)
Aminas/química , Ésteres/química , Compuestos de Organoselenio/química , Tiourea/química , Urea/análogos & derivados , Aminas/síntesis química , Catálisis , Teoría Funcional de la Densidad , Ésteres/síntesis química , Cinética , Modelos Químicos , Urea/químicaRESUMEN
Tris(ß-diketimine) cyclophanes are an important ligand class for investigating cooperative multimetallic interactions of bioinorganic clusters. Discussed herein are the synthetic factors governing access to tris(ß-diketimine) cyclophanes versus tripodal tri-ß-aminoenones. Cyclophanes bearing Me, Et, and MeO cap substituents and ß-Me, Et, or Ph arm substituents are obtained, and a modified condensation method produced α-Me ß-Me cyclophane. These operationally simple procedures produce the ligands in gram quantities and in 22-94% yields.
Asunto(s)
LigandosRESUMEN
The paper focuses on exploiting aurophilic bonding to produce white light emitting materials. Inorganic Click (iClick) is employed to link two or four Au(I) metal ions through a triazolate bridge. Depending on the choice of phosphine ligand (PEt3 or PPh3), dinuclear Au2-FO or tetranuclear Au4-FO complexes can be controllably synthesized (FO = 2-(9,9-dioctylfluoreneyl-)). The iClick products Au2-FO and Au4-FO are characterized by combustion analysis and multinuclear NMR, TOCSY 1D, 1H-13C gHMBC, and 1H-13C gHSQC. In addition, the photophysical properties of Au2-FO and Au4-FO were examined in THF solution. Transient absorption spectroscopy was employed to elucidate the excited state features of the gold compounds. Solution processed OLEDs were fabricated and characterized, which gave white light electroluminescence with CIE coordinates (0.34, 0.36), as seen referenced to CIE standard illuminant D65 (0.31, 0.32). TDDFT computational analysis of Au2-FO and Au4-FO reveals the origin of light emission. In the case of Au4-FO, direct excitation leads to increased aurophilic bonding in the excited state, and as a result the emission profile is broadened to cover a larger region of the visible spectrum, thus giving white light emission. Designing molecules that can access or increase aurophilic bonding in the excited state provides another tool for fine-tuning the emission profiles of gold complexes.
RESUMEN
Reported is the hydrolysis of a homogeneous Mo-nitride complex bearing a trianionic pincer-type ligand to produce ammonia. Treating the anionic [(ONO)]Mo≡N(OtBu)]Ph3 PCH3 with two equivalents of water produces ammonia and the dioxo complex [(ONO)]MoO2 ]Ph3 PCH3 . X-Ray crystal structures of the starting nitrido complex and product dioxo complex are presented. Evidence for ammonia release comes from GC-MS and deuterium-labelling studies. The reaction is presented in the context of a two-stage solar thermochemical dinitrogen fixation process as the solid-state nitride hydrolysis step.
RESUMEN
Tungsten nitrido amido guanidinato complexes of the type WN(NR2)[(NR')2C(NR2)]2 (R = Me, Et; R' = i Pr, Cy) were synthesized as precursors for aerosol-assisted chemical vapor deposition (AACVD) of WNxCy thin films. The reaction of tungsten nitrido amido complexes of the type WN(NR2)3 (R = Me, Et) with two equivalents of a carbodiimide R'N=C=NR' (R' = i Pr, Cy) resulted in two insertions of a carbodiimide into W-N(amido) bonds, affording bis(guanidinato) amido nitrido tungsten complexes. These compounds were characterized by 14N NMR, indicating distinctive chemical shifts for each type of N-bound ligand. Crystallographic structure determination of WN(NMe2)[(N i Pr)2C(NMe2)]2 showed the guanidinato ligands to be non-equivalent. The complex WN(NMe2)[(N i Pr)2C(NMe2)]2 was demonstrated to serve as a precursor for AACVD of WNxCy thin films, resulting in featureless, X-ray amorphous thin films for growth temperatures 200 - 400 °C.
RESUMEN
Stevia rebaudiana and its diterpene glycosides are one of the main focuses of food companies interested in developing novel zero calorie sugar substitutes since the recognition of steviol glycosides as Generally Recognized as Safe (GRAS) by the United States Food and Drug Administration. Rebaudioside A, one of the major steviol glycosides of the leaves is more than 200 times sweeter than sucrose. However, its lingering aftertaste makes it less attractive as a table-top sweetener, despite its human health benefits. Herein, we report the purification of two novel tetra-glucopyranosyl diterpene glycosides 1 and 3 (rebaudioside A isomers) from a commercial Stevia rebaudiana leaf extract compounds, their saponification products compounds 2 and 4, together with three known compounds isolated in gram quantities. Compound 1 was determined to be 13-[(2-O-ß-d-glucopyranosyl-6-O-ß-d-glucopyranosyl-ß-d-glucopyranosyl) oxy]ent-kaur-16-en-19-oic acid-ß-d-glucopyranosy ester (rebaudioside Z), whereas compound 3 was found to be 13-[(2-O-ß-d-glucopyranosyl-3-O-ß-d-glucopyranosyl-ß-d-glucopyranosyl) oxy]ent-hydroxyatis-16-en-19-oic acid -ß-d-glucopyranosy ester. Two new tetracyclic derivatives with no sugar at position C-19 were prepared from rebaudiosides 1 and 3 under mild alkaline hydrolysis to afford compounds 2 13-[(2-O-ß-d-glucopyranosyl-6-O-ß-d-glucopyranosyl-ß-d-glucopyranosyl) oxy]ent-kaur-16-en-19-oic acid (rebaudioside Z1) and 4 13-[(2-O-ß-d-glucopyranosyl-3-O-ß-d-glucopyranosyl-ß-d-glucopyranosyl) oxy]ent-hydroxyatis-16-en-19-oic acid. Three known compounds were purified in gram quantities and identified as rebaudiosides A (5), H (6) and J (7). Chemical structures were unambiguously elucidated using different approaches, namely HRESIMS, HRESI-MS/MS, and 1D-and 2D-NMR spectroscopic data. Additionally, a high-quality crystal of iso-stevioside was grown in methanol and its structure confirmed by X-ray diffraction.
Asunto(s)
Diterpenos/química , Extractos Vegetales/química , Stevia/química , Espectroscopía de Resonancia Magnética con Carbono-13 , Glicosilación , Espectroscopía de Protones por Resonancia MagnéticaRESUMEN
As an aid for structure elucidation of new steviol glycosides, reversed-phase C18 high-performance liquid chromatography method was developed with several previously characterized diterpene glycosides, to identify known and detect novel aglycone-C13 oligosaccharide moieties and indirectly identify C-19 interlinkages. Elution order of several diterpene glycosides and their aglycone-C13 oligosaccharide substituted with different sugar arrangements were also summarized. Comparison of the retention time of a product obtained after alkaline hydrolysis with the aglycone-C-13 portions of known compounds reported herein allowed us to deduce the exact positions of the sugars in the C-13 oligosaccharide portion. The elution position of several steviol glycosides with an ent-kaurene skeleton was helpful to describe an identification key. Two previously uncharacterized diterpene glycosides together with two known compounds were isolated from a commercial Stevia rebaudiana leaf extract. One was found to be 13-[(2-O-ß-d-xylopyranosyl-3-O-ß-d-glucopyranosyl-ß-d-glucopyranosyl)oxy]ent-kaur-16-en-19-oic acid-(2-O-ß-d-glucopyranosyl-ß-d-glucopyranosyl) ester (rebaudioside V), whereas the other was determined to be 13-[(2-O-ß-d-xylopyranosyl-3-O-ß-d-glucopyranosyl-ß-d-glucopyranosyl)oxy]ent-kaur-16-en-19-oic acid-(2-O-α-l-rhamnopyranosyl-3-O-ß-d-glucopyranosyl-ß-d-glucopyranosyl) ester (rebaudioside W). Previously reported compounds were isolated in gram quantities and identified as rebaudioside J and rebaudioside H. In addition, a C-19 sugar-free derivative was also prepared from rebaudioside H to afford rebaudioside H1 . Chemical structures were partially determined by the high-performance liquid chromatography method and unambiguously characterized by using one-dimensional and two-dimensional nuclear magnetic resonance experiments.
Asunto(s)
Cromatografía Líquida de Alta Presión , Diterpenos/análisis , Glicósidos/análisis , Oligosacáridos/análisis , Stevia/químicaRESUMEN
Tungsten alkylidynes [CF3-ONO]W≡CC(CH3)3(THF)2 (1) and [(t)BuOCO]W≡CC(CH3)3(THF)2 (3) react with ethylene. Complex 1 reacts reversibly with ethylene to give the metallacyclobutene (2). Complex 3 reacts with ethylene to form the tethered alkylidene (4) featuring a tetraanionic pincer ligand. Complexes 1 and 3 initiate the polymerization of norbornene at room temperature. The polymerization of norbornene by 1 is not stereoselective, whereas 3 generates a highly cis and syndiotactic cyclic polynorbornene. Comparison of the intrinsic viscosity, radius of gyration, and elution time of the synthesized cyclic polynorbornene with those of linear analogues provides conclusive evidence for a cyclic topology.
RESUMEN
Through-space (19) F-(15) N couplings revealed the configuration of flubenzimine, with the CF3 group on N4 pointing towards the lone pair of N5. The (19) F-(15) N coupling constants were measured at natural abundance using a spin-state selective indirect-detection pulse sequence. As (15) N-labelled proteins are routinely synthesized for NMR studies, through-space (19) F-(15) N couplings have the potential to probe the stereochemistry of these proteins by (19) F labelling of some amino acids or can reveal the site of docking of fluorine-containing drugs. Copyright © 2016 John Wiley & Sons, Ltd.