High-Speed Atomic Force Microscopy Revealing Contamination in DNA Purification Systems.

Motivated by reports of low-level DNA contamination in popular commercial DNA purification kits, we employed a novel high-speed atomic force microscopy (HS-AFM) method to detect and characterize particulate and polymeric contaminants in four such systems: Qiagen MinElute PCR Purification, Zymo Research DNA Clean and Concentrator-5, Invitrogen ChargeSwitch-Pro PCR Purification, and Beckman Coulter AMPure XP. HS-AFM avoids amplification artifacts present in PCR or in the sequencing of amplified products, and it requires no chemical labels and easily achieves near-single-molecule sensitivity. Using this technique, we found trace levels of filamentous contamination, similar in appearance to dsDNA, in eluates from the Zymo, Qiagen, and ChargeSwitch kits. Conversely, we detected no contaminants in magnetic bead-based AMPure XP solutions. Eluates from the Zymo kits also tested positive for DNA in fluorescent intercalator dye and whole genome amplification (WGA) assays. Qiagen kits tested positive in the fluorescence assay but negative in the WGA assay. Both ChargeSwitch and AMPure XP tested negative in the fluorescence assay while the WGA results for these two kits were ambiguous. Taken together, our findings suggest AMPure XP would be the best choice for analyses requiring very high analytical stringency. While HS-AFM alone does not provide chemical specificity, it is a potentially valuable tool for characterizing and quantifying trace contaminants in molecular biology reagents and instruments in cases where conventional techniques fail.

Multistate resistive switching in silver nanoparticle films.

Resistive switching devices have garnered significant consideration for their potential use in nanoelectronics and non-volatile memory applications. Here we investigate the nonlinear current-voltage behavior and resistive switching properties of composite nanoparticle films comprising a large collective of metal-insulator-metal junctions. Silver nanoparticles prepared via the polyol process and coated with an insulating polymer layer of tetraethylene glycol were deposited onto silicon oxide substrates. Activation required a forming step achieved through application of a bias voltage. Once activated, the nanoparticle films exhibited controllable resistive switching between multiple discrete low resistance states that depended on operational parameters including the applied bias voltage, temperature and sweep frequency. The films' resistance switching behavior is shown here to be the result of nanofilament formation due to formative electromigration effects. Because of their tunable and distinct resistance states, scalability and ease of fabrication, nanoparticle films have a potential place in memory technology as resistive random access memory cells.

Atomic force microscopic detection enabling multiplexed low-cycle-number quantitative polymerase chain reaction for biomarker assays.

Quantitative polymerase chain reaction is the current "golden standard" for quantification of nucleic acids; however, its utility is constrained by an inability to easily and reliably detect multiple targets in a single reaction. We have successfully overcome this problem with a novel combination of two widely used approaches: target-specific multiplex amplification with 15 cycles of polymerase chain reaction (PCR), followed by single-molecule detection of amplicons with atomic force microscopy (AFM). In test experiments comparing the relative expression of ten transcripts in two different human total RNA samples, we find good agreement between our single reaction, multiplexed PCR/AFM data, and data from 20 individual singleplex quantitative PCR reactions. This technique can be applied to virtually any analytical problem requiring sensitive measurement concentrations of multiple nucleic acid targets.

Nanoscale characterization of effect of L-arginine on Streptococcus mutans biofilm adhesion by atomic force microscopy.

A major aetiological factor of dental caries is the pathology of the dental plaque biofilms. The amino acid L-arginine (Arg) is found naturally in saliva as a free molecule or as a part of salivary peptides and proteins. Plaque bacteria metabolize Arg to produce alkali and neutralize glycolytic acids, promoting a less cariogenous oral microbiome. Here, we explored an alternative and complementary mechanism of action of Arg using atomic force microscopy. The nanomechanical properties of Streptococcus mutans biofilm extracellular matrix were characterized under physiological buffer conditions. We report the effect of Arg on the adhesive behaviour and structural properties of extracellular polysaccharides in S. mutans biofilms. High-resolution imaging of biofilm surfaces can reveal additional structural information on bacterial cells embedded within the surrounding extracellular matrix. A dense extracellular matrix was observed in biofilms without Arg compared to those grown in the presence of Arg. S. mutans biofilms grown in the presence of Arg could influence the production and/or composition of extracellular membrane glucans and thereby affect their adhesion properties. Our results suggest that the presence of Arg in the oral cavity could influence the adhesion properties of S. mutans to the tooth surface.

Nanostructured self-assembly of inverted formin 2 (INF2) and F-actin-INF2 complexes revealed by atomic force microscopy.

Self-organization of cytoskeletal proteins such as actin and tubulin into filaments and microtubules is frequently assisted by the proteins binding to them. Formins are regulatory proteins that nucleate the formation of new filaments and are essential for a wide range of cellular functions. The vertebrate inverted formin 2 (INF2) has both actin filament nucleating and severing/depolymerizing activities connected to its ability to encircle actin filaments. Using atomic force microscopy, we report that a formin homology 2 (FH2) domain-containing construct of INF2 (INF2-FH1-FH2-C or INF2-FFC) self-assembles into nanoscale ringlike oligomeric structures in the absence of actin filaments, demonstrating an inherent ability to reorganize from a dimeric to an oligomeric state. A construct lacking the C-terminal region (INF2-FH1-FH2 or INF2-FF) also oligomerizes, confirming the dominant role of FH2-mediated interactions. Moreover, INF2-FFC domains were observed to organize into ringlike structures around single actin filaments. This is the first demonstration that formin FH2 domains can self-assemble into oligomers in the absence of filaments and has important implications for observing unaveraged decoration and/or remodeling of filaments by actin binding proteins.

Biophysical and morphological effects of nanodiamond/nanoplatinum solution (DPV576) on metastatic murine breast cancer cells in vitro.

Nanoparticles have recently gained increased attention as drug delivery systems for the treatment of cancer due to their minute size and unique chemical properties. However, very few studies have tested the biophysical changes associated with nanoparticles on metastatic cancer cells at the cellular and sub-cellular scales. Here, we investigated the mechanical and morphological properties of cancer cells by measuring the changes in cell Young's Modulus using AFM, filopodial retraction (FR) by time lapse optical light microscopy imaging and filopodial disorganization by high resolution AFM imaging of cells upon treatment with nanoparticles. In the current study, nanomechanical changes in live murine metastatic breast cancer cells (4T1) post exposure to a nanodiamond/nanoplatinum mixture dispersed in aqueous solution (DPV576), were monitored. Results showed a decrease in Young's modulus at two hours post treatment with DPV576 in a dose dependent manner. Partial FR at 20 min and complete FR at 40 min were observed. Moreover, analysis of the retraction distance (in microns) measured over time (minutes), showed that a DPV576 concentration of 15%v/v yielded the highest FR rate. In addition, DPV576 treated cells showed early signs of filopodial disorganization and disintegration. This study demonstrates the changes in cell stiffness and tracks early structural alterations of metastatic breast cancer cells post treatment with DPV576, which may have important implications in the role of nanodiamond/nanoplatinum based cancer cell therapy and sensitization to chemotherapy drugs.

Benchtop fabrication of memristive atomic switch networks.

Recent advances in nanoscale science and technology provide possibilities to directly self-assemble and integrate functional circuit elements within the wiring scheme of devices with potentially unique architectures. Electroionic resistive switching circuits comprising highly interconnected fractal electrodes and metal-insulator-metal interfaces, known as atomic switch networks, have been fabricated using simple benchtop techniques including solution-phase electroless deposition. These devices are shown to activate through a bias-induced forming step that produces the frequency dependent, nonlinear hysteretic switching expected for gapless-type atomic switches and memristors. By eliminating the need for complex lithographic methods, such an approach toward device fabrication provides a more accessible platform for the study of ionic resistive switches and memristive systems.

Thermodynamic self-assembly of two-dimensional pi-conjugated metal-porphyrin covalent organic frameworks by "on-site" equilibrium polymerization.

Two-dimensional pi-conjugated metal-porphyrin covalent organic frameworks were produced in aqueous solution on an iodine-modified Au(111) surface by "on-site" azomethine coupling of Fe(III)-5,10,15,20-tetrakis(4-aminophenyl)porphyrin (FeTAPP) with terephthal dicarboxaldehyde and investigated in detail using in-situ scanning tunneling microscopy. Mixed covalent organic porphyrin frameworks consisting of FeTAPP and metal-free TAPP (H2TAPP) were prepared through simultaneous adsorption in a mixed solution as well as partial replacement of FeTAPP by H2TAPP in an as-prepared metal-porphyrin framework. In the mixed framework, the relative distribution of FeTAPP to H2TAPP was not random and revealed a preference for homo-connection rather than heteroconnection. The construction of substrate-supported, pi-conjugated covalent frameworks from multiple building blocks, including metal centers, will be of significant utility in the design of functional molecular nanoarchitectures.

Advanced Interferometry with 3-D Structured Illumination Reveals the Surface Fine Structure of Complex Biospecimens.

Interference reflection microscopy (IRM) is a powerful, label-free technique to visualize the surface structure of biospecimens. However, stray light outside a focal plane obscures the surface fine structures beyond the diffraction limit (dxy ≈ 200 nm). Here, we developed an advanced interferometry approach to visualize the surface fine structure of complex biospecimens, ranging from protein assemblies to single cells. Compared to 2-D, our unique 3-D structure illumination introduced to IRM enabled successful visualization of fine structures and the dynamics of protein crystal growth under lateral (dx-y ≈ 110 nm) and axial (dx-z ≤ 5 nm) resolutions and dynamical adhesion of microtubule fiber networks with lateral resolution (dx-y ≈ 120 nm), 10 times greater than unstructured IRM (dx-y ≈ 1000 nm). Simultaneous reflection/fluorescence imaging provides new physical fingerprints for studying complex biospecimens and biological processes such as myogenic differentiation and highlights the potential use of advanced interferometry to study key nanostructures of complex biospecimens.

Amplification of conformational effects via tert-butyl groups: hexa-tert-butyl decacyclene on Cu(100) at room temperature.

The design of molecular systems as functional elements for use in next-generation electronic sensors and devices often relies on the addition of functional groups acting as spacers to modify adsorbate-substrate interactions. Although advantageous in many regards, these spacer groups have the secondary effect of amplifying internal conformational effects of the parent molecule. Here we investigate one such molecule-2,5,8,11,14,17-hexa-tert-butyl-decacyclene (HBDC, C60H66)-deposited on Cu(100) at monolayer and submonolayer coverages using an ultra-high vacuum (UHV) scanning tunneling microscope (STM). By combining submolecular resolution imaging with computational methods, we describe a variety of properties related to the effects of adding tert-butyl spacers to a decacyclene core, including the molecular conformation, structure, and chiral separation of the molecular adlayer, strong intermolecular interactions, and a metastable pinned conformation of the molecule brought on by deformation under high-bias conditions that enable an examination of its diffusive 2D molecular gas at room temperature. Collectively, these observations provide direct insight into the effect of adding spacers to a flexible molecular core such as decacyclene as relates to both intermolecular and adsorbate-substrate interfaces.

Synaptic plasticity and memory functions achieved in a WO3-x-based nanoionics device by using the principle of atomic switch operation.

A compact neuromorphic nanodevice with inherent learning and memory properties emulating those of biological synapses is the key to developing artificial neural networks rivaling their biological counterparts. Experimental results showed that memorization with a wide time scale from volatile to permanent can be achieved in a WO3-x-based nanoionics device and can be precisely and cumulatively controlled by adjusting the device's resistance state and input pulse parameters such as the amplitude, interval, and number. This control is analogous to biological synaptic plasticity including short-term plasticity, long-term potentiation, transition from short-term memory to long-term memory, forgetting processes for short- and long-term memory, learning speed, and learning history. A compact WO3-x-based nanoionics device with a simple stacked layer structure should thus be a promising candidate for use as an inorganic synapse in artificial neural networks due to its striking resemblance to the biological synapse.

A theoretical and experimental study of neuromorphic atomic switch networks for reservoir computing.

Atomic switch networks (ASNs) have been shown to generate network level dynamics that resemble those observed in biological neural networks. To facilitate understanding and control of these behaviors, we developed a numerical model based on the synapse-like properties of individual atomic switches and the random nature of the network wiring. We validated the model against various experimental results highlighting the possibility to functionalize the network plasticity and the differences between an atomic switch in isolation and its behaviors in a network. The effects of changing connectivity density on the nonlinear dynamics were examined as characterized by higher harmonic generation in response to AC inputs. To demonstrate their utility for computation, we subjected the simulated network to training within the framework of reservoir computing and showed initial evidence of the ASN acting as a reservoir which may be optimized for specific tasks by adjusting the input gain. The work presented represents steps in a unified approach to experimentation and theory of complex systems to make ASNs a uniquely scalable platform for neuromorphic computing.

Rigid microenvironments promote cardiac differentiation of mouse and human embryonic stem cells.

While adult heart muscle is the least regenerative of tissues, embryonic cardiomyocytes are proliferative, with embryonic stem (ES) cells providing an endless reservoir. In addition to secreted factors and cell-cell interactions, the extracellular microenvironment has been shown to play an important role in stem cell lineage specification, and understanding how scaffold elasticity influences cardiac differentiation is crucial to cardiac tissue engineering. Though previous studies have analyzed the role of the matrix elasticity on the function of differentiated cardiomyocytes, whether it affects the induction of cardiomyocytes from pluripotent stem cells is poorly understood. Here, we examined the role of matrix rigidity on the cardiac differentiation using mouse and human ES cells. Culture on polydimethylsiloxane (PDMS) substrates of varied monomer-to-crosslinker ratios revealed that rigid extracellular matrices promote a higher yield of de novo cardiomyocytes from undifferentiated ES cells. Using an genetically modified ES system that allows us to purify differentiated cardiomyocytes by drug selection, we demonstrate that rigid environments induce higher cardiac troponin T expression, beating rate of foci, and expression ratio of adult α- to fetal ß- myosin heavy chain in a purified cardiac population. M-mode and mechanical interferometry image analyses demonstrate that these ES-derived cardiomyocytes display functional maturity and synchronization of beating when co-cultured with neonatal cardiomyocytes harvested from a developing embryo. Together, these data identify matrix stiffness as an independent factor that instructs not only the maturation of the already differentiated cardiomyocytes but also the induction and proliferation of cardiomyocytes from undifferentiated progenitors. Manipulation of the stiffness will help direct the production of functional cardiomyocytes en masse from stem cells for regenerative medicine purposes.

Molecular cooperativity of drebrin1-300 binding and structural remodeling of F-actin.

Drebrin A, an actin-binding protein, is a key regulatory element in synaptic plasticity of neuronal dendrites. Understanding how drebrin binds and remodels F-actin is important for a functional analysis of their interactions. Conventionally, molecular models for protein-protein interactions use binding parameters derived from bulk solution measurements with limited spatial resolution, and the inherent assumption of homogeneous binding sites. In the case of actin filaments, their structural and dynamic states-as well as local changes in those states-may influence their binding parameters and interaction cooperativity. Here, we probed the structural remodeling of single actin filaments and the binding cooperativity of DrebrinA(1-300) -F-actin using AFM imaging. We show direct evidence of DrebrinA(1-300)-induced cooperative changes in the helical structure of F-actin and observe the binding cooperativity of drebrin to F-actin with nanometer resolution. The data confirm at the in vitro molecular level that variations in the F-actin helical structure can be modulated by cooperative binding of actin-binding proteins.

Short-term plasticity and long-term potentiation mimicked in single inorganic synapses.

Memory is believed to occur in the human brain as a result of two types of synaptic plasticity: short-term plasticity (STP) and long-term potentiation (LTP; refs 1-4). In neuromorphic engineering, emulation of known neural behaviour has proven to be difficult to implement in software because of the highly complex interconnected nature of thought processes. Here we report the discovery of a Ag(2)S inorganic synapse, which emulates the synaptic functions of both STP and LTP characteristics through the use of input pulse repetition time. The structure known as an atomic switch, operating at critical voltages, stores information as STP with a spontaneous decay of conductance level in response to intermittent input stimuli, whereas frequent stimulation results in a transition to LTP. The Ag(2)S inorganic synapse has interesting characteristics with analogies to an individual biological synapse, and achieves dynamic memorization in a single device without the need of external preprogramming. A psychological model related to the process of memorizing and forgetting is also demonstrated using the inorganic synapses. Our Ag(2)S element indicates a breakthrough in mimicking synaptic behaviour essential for the further creation of artificial neural systems that emulate characteristics of human memory.

In situ STM investigation of aromatic poly(azomethine) arrays constructed by "on-site" equilibrium polymerization.

Two-dimensional (2D) arrays of π-conjugated aromatic polymers produced by surface-selective Schiff base coupling reactions between an aromatic diamine and an aromatic dialdehyde were investigated in detail using in situ scanning tunneling microscopy. Surface-selective coupling was achieved for almost all diamine/dialdehyde combinations attempted, although several combinations did not proceed even in homogeneous aqueous alkaline solution. Most of the combinations of an aromatic diamine and a dialdehyde, except the combinations of 4,4'-azodianiline with mono/bithiophenedicarboxaldehyde, formed highly ordered π-conjugated polymer arrays on an iodine-modified Au(111) surface in aqueous solution at a suitable pH. The simplest polymer of the various combinations tested, obtained from the combination of 1,4-diaminobenzene with terephthaldicarboxaldehyde, gave a 2D array consisting of linearly connected benzene units. Poly(azomethine) adlayers caused a positive shift in the electrochemical potential of the butterfly shaped oxidative adsorption and reductive desorption of iodine. The acceleration of the reductive desorption of iodine suggests the existence of a weak interaction between the polymer layer and iodine. Not only the first polymer adlayers but also partially adsorbed secondary adlayers with "on-top" epitaxial behavior were frequently observed for all polymer systems. The alignment of the polymer chains in the adlayers possessed a certain regularity in terms of a regular interval between polymer chains because of repulsive interpolymer interactions.

Electrostatic force microscopy as a broadly applicable method for characterizing pyroelectric materials.

A general method based on the combination of electrostatic force microscopy with thermal cycling of the substrate holder is presented for direct, nanoscale characterization of the pyroelectric effect in a range of materials and sample configurations using commercial atomic force microscope systems. To provide an example of its broad applicability, the technique was applied to the examination of natural tourmaline gemstones. The method was validated using thermal cycles similar to those experienced in ambient conditions, where the induced pyroelectric response produced localized electrostatic surface charges whose magnitude demonstrated a correlation with the iron content and heat dissipation of each gemstone variety. In addition, the surface charge was shown to persist even at thermal equilibrium. This behavior is attributed to constant, stochastic cooling of the gemstone surface through turbulent contact with the surrounding air and indicates a potential utility for energy harvesting in applications including environmental sensors and personal electronics. In contrast to previously reported methods, ours has a capacity to carry out such precise nanoscale measurements with little or no restriction on the sample of interest, and represents a powerful new tool for the characterization of pyroelectric materials and devices.

Correlative nanomechanical profiling with super-resolution F-actin imaging reveals novel insights into mechanisms of cisplatin resistance in ovarian cancer cells.

The exact molecular mechanisms of ovarian cancer platinum resistance are not well understood, and biomarkers to reliably predict ovarian cancer resistance to platinum and other chemotherapeutic agents are lacking. Biomechanics of cisplatin-treated ovarian cancer cells were measured quantitatively at nanoscale level using atomic force microscopy. We demonstrate that cisplatin modulates the cellular nanomechanics of ovarian cancer cells; sensitive cells show dose-dependent increase in cell stiffness, which is effected by disrupting the F-actin polymerization. In contrast, resistant cells show no significant changes in cell stiffness upon cisplatin treatment. Further, stimulated emission depletion, an emerging super-resolution microscopy, shows that at the molecular level, F-actin is indeed remodeled considerably in cisplatin-sensitive and cisplatin-resistant cells. These findings reveal a direct role of the actin remodeling mechanism in cisplatin resistance of ovarian cancer cells, suggesting potential future applications of nanomechanical profiling as a marker for cancer drug sensitivity. FROM THE CLINICAL EDITOR: In this paper, nanomechanical profiling and an emerging super-resolution microscopy method was utilized to decipher the mechanisms of cisplatin resistance in ovarian cancer cells, paving the way to future studies of this and similar other problems with drug resistance in cancer biology.

Atomic force microscopy reveals drebrin induced remodeling of f-actin with subnanometer resolution.

We show by high-resolution atomic force microscopy analysis that drebrin A (a major neuronal actin binding protein) induced F-actin structural and mechanical remodeling involves significant changes in helical twist and filament stiffness (+55% persistence length). These results provide evidence of a unique mechanical role of drebrin in the dendrites, contribute to current molecular-level understanding of the properties of the neuronal cytoskeleton, and reflect the role of biomechanics at the nanoscale, to modulate nanofilament-structure assemblies such as F-actin.

Continuity of graphene on polycrystalline copper.

The atomic structure of graphene on polycrystalline copper substrates has been studied using scanning tunneling microscopy. The graphene overlayer maintains a continuous pristine atomic structure over atomically flat planes, monatomic steps, edges, and vertices of the copper surface. We find that facets of different identities are overgrown with graphene's perfect carbon honeycomb lattice. Our observations suggest that growth models including a stagnant catalytic surface do not apply to graphene growth on copper. Contrary to current expectations, these results reveal that the growth of macroscopic pristine graphene is not limited by the underlying copper structure.