Sustainable pathways for solar desalination using nanofluids: A critical review.

Water is a fundamental requirement for the survival of human beings. Although water is abundantly available across the globe, access to freshwater still remains a major concern. Most of the water available is saline or brackish, which is not fit for human consumption. Desalination is the optimum solution for production of potable water from saline water. A major shortcoming of conventional desalination technologies is their dependence on fossil fuel that results in environmental degradation, global warming, etc. Therefore, sustainable desalination technology has evolved as a need of hour. Among all renewable energy resources, solar energy is abundantly available and can be potentially harvested. Therefore, solar energy can be used to drive sustainable desalination technologies. A solar still converts saline water into freshwater in a single step using solar energy. But the major drawbacks of solar still are relatively lower efficiency and lower yield. Nanofluids are widely used to overcome these limitations due to their extraordinary and unique properties. This paper critically reviews the recent research performed on the application of nanofluids in solar desalination systems. Methods of nanofluid preparation, their types and properties are also discussed in detail. Application of nanofluids in solar desalination systems is discussed with special attention on performance enhancement of solar stills. Combinations of nanofluids with various other performance enhancement techniques are also considered. The effectiveness of nanofluids in solar stills is found to be dependent majorly on the nature and concentration of the nanofluid used.

Enhancing sequencing batch reactors for efficient wastewater treatment across diverse applications: A comprehensive review.

This review explores recent progress in sequencing batch reactors (SBRs) and hybrid systems for wastewater treatment, emphasizing their adaptability and effectiveness in managing diverse wastewater compositions. Through extensive literature analysis from 1985 to 2024, the integration of advanced technologies like photocatalysis within hybrid systems is highlighted, showing promise for improved pollutant removal efficiencies. Insights into operational parameters, reactor design, and microbial communities influencing SBR performance are discussed. Sequencing batch biofilm reactors (SBBRs) demonstrate exceptional efficiency in Chemical Oxygen Demand, nitrogen, and phosphorus removal, while innovative anaerobic-aerobic-anoxic sequencing batch reactors (AOA-SBRs) offer effective nutrient removal strategies. Hybrid systems, particularly photocatalytic sequencing batch reactors (PSBRs), show potential for removing persistent pollutants like antibiotics and phenols, underscoring the significance of advanced oxidation processes. However, research gaps persist, including the need for comparative studies between different SBR types and comprehensive evaluations of long-term performance, environmental variability, and economic viability. Addressing these gaps will be vital for the practical deployment of SBRs and hybrid systems. Further exploration of synergies, economic considerations, and reactor stability will enhance the sustainability and scalability of these technologies for efficient and eco-friendly wastewater treatment.

Enhancing agricultural output: Investigating the impact of advanced organic formulations on crop productivity, nutrient use efficiency, and profitability in a multi-crop system.

The significance of integrating agricultural by-products such as paddy husk ash (PHA) and potato peels with organic fertilizers lies in enhancing soil fertility, increasing crop yields, and reducing reliance on traditional organic fertilizers like farmyard manure (FYM) or compost alone. Grounded in sustainable agriculture and nutrient management frameworks, this study examines the impact of diverse formulations derived from agricultural waste on productivity, nutrient efficiency, and profitability in a pigeon pea-vegetable mustard-okra cropping system. A two-year field experiment (2020-2022) at ICAR-IARI, New Delhi tested seven nutrient sources viz., (T1) control, (T2) 100% RDN through FYM, (T3) 100% RDN through improved RRC, (T4) 100% RDN through PHA based formulation, (T5) 75% RDN through PHA based formulation, (T6) 100% RDN through PPC based formulation and (T7) 75% RDN through PPC based formulation that were tested in RBD and replicated thrice. Treatment T4 had significant effect on seed yield of pigeon pea (1.89 ± 0.09 and 1.97 ± 0.12 t ha-1), leaf yield of vegetable mustard (81.57 ± 4.59 and 82.97 ± 4.17 t ha-1), and fruit yield of okra (13.54 ± 0.82 and 13.78 ± 0.81 t ha-1) grown in rotation, followed by treatment T6 and T2 during both the years respectively over control. Enhanced system uptake of N, P and K along with system gross and net returns in T4, showed increases of 78.9%, 83.8%, 72.4%, 54.4% and 56.8% in the first year and 77.5%, 80.8%, 77.7%, 54.8% and 57.4% in the second year, respectively, over control. Treatment T4 significantly improved apparent recovery by 66.3% and 69.2% in pigeon pea, 64.7% and 47.9% in vegetable mustard, and 72.7% and 79.4% in okra over T3, averaged across two years. Based on the above findings, (T4) 100% RDN through PHA-based formulation, and (T6) 100% RDN through PPC-based formulation can be recommended for areas with a shortage of FYM but availability of rice husk ash/potato peels for sustainable agricultural wastes and improved sustainability.

Graphene-based functional electrochemical sensors for the detection of chlorpyrifos in water and food samples: a review.

Prolonged and excessive use of chlorpyrifos (CPS) has caused severe pollution, particularly in crops, vegetables, fruits, and water sources. As a result, CPS is detected in various food and water samples using conventional methods. However, its applications are limited due to size, portability, cost, etc. In this regard, electrochemical sensors are preferred for CPS detection due to their high sensitivity, reliability, rapid, on-site detection, and user-friendly. Notably, graphene-based electrochemical sensors have gained more attention due to their unique physiochemical and electrochemical properties. It shows high sensitivity, selectivity, and quick response because of its high surface area and high conductivity. In this review, we have discussed an overview of three graphene-based different functional electrochemical sensors such as electroanalytical sensors, bio-electrochemical sensors, and photoelectrochemical sensors used to detect CPS in food and water samples. Furthermore, the fabrication and operation of these electrochemical sensors using various materials (low band gap material, nanomaterials, enzymes, antibodies, DNA, aptamers, and so on) and electrochemical techniques (CV, DPV, EIS, SWV etc.) are discussed. The study found that the electrical signal was reduced with increasing CPS concentration. This is due to the blocking of active sites, reduced redox reaction, impedance, irreversible reactions, etc. In addition, acetylcholinesterase-coupled sensors are more sensitive and stable than others. Also, it can be further improved by fabricating with low band gap nanomaterials. Despite their advantages, these sensors have significant drawbacks, such as low reusability, repeatability, stability, and high cost. Therefore, further research is required to overcome such limitations.

Prevalence and hazardous impact of pharmaceutical and personal care products and antibiotics in environment: A review on emerging contaminants.

Antibiotic resistance is a global health emergency linked to unrestrained use of pharmaceutical and personal care products (PPCPs) as prophylactic agent and therapeutic purposes across various industries. Occurrence of pharmaceuticals are identified in ground water, surface water, soils, and wastewater treatment plants (WWTPs) in ng/L to µg/L concentration range. The prevalence of organic compounds including antimicrobial agents, hormones, antibiotics, preservatives, disinfectants, synthetic musks etc. in environment have posed serious health concerns. The aim of this review is to elucidate the major sources accountable for emergence of antibiotic resistance. For this purpose, variety of introductory sources and fate of PPCPs in aquatic environment including human and veterinary wastes, aquaculture and agriculture related wastes, and other anthropogenic activities have been discussed. Furthermore, genetic and enzymatic factors responsible for transfer and appearance of antibiotic resistance genes are presented. Ecotoxicity of PPCPs has been studied in environment in order to present risk imposed to human and ecological health. As per published literature reports, the removal of antibiotics and related traces being difficult, couples the possibility of emergence of antibiotic resistance and hence sustainability in global water resources. Therefore, research on environmental behavior and control strategies should be conducted along with assessing their chronic toxicity to identify potential human and ecological risks.

Unravelling the Role of Rhizospheric Plant-Microbe Synergy in Phytoremediation: A Genomic Perspective.

BACKGROUND: Accretion of organic and inorganic contaminants in soil interferes in the food chain, thereby posing a serious threat to the ecosystem and adversely affecting crop productivity and human life. Both endophytic and rhizospheric microbial communities are responsible for the biodegradation of toxic organic compounds and have the capability to enhance the uptake of heavy metals by plants via phytoremediation approaches. The diverse set of metabolic genes encoding for the production of biosurfactants and biofilms, specific enzymes for degrading plant polymers, modification of cell surface hydrophobicity and various detoxification pathways for the organic pollutants, plays a significant role in bacterial driven bioremediation. Various genetic engineering approaches have been demonstrated to modulate the activity of specific microbial species in order to enhance their detoxification potential. Certain rhizospheric bacterial communities are genetically modified to produce specific enzymes that play a role in degrading toxic pollutants. Few studies suggest that the overexpression of extracellular enzymes secreted by plant, fungi or rhizospheric microbes can improve the degradation of specific organic pollutants in the soil. Plants and microbes dwell synergistically, where microbes draw benefit by nutrient acquisition from root exudates whereas they assist in plant growth and survival by producing certain plant growth promoting metabolites, nitrogen fixation, phosphate solubilization, auxin production, siderophore production, and inhibition or suppression of plant pathogens. Thus, the plant-microbe interaction establishes the foundation of the soil nutrient cycle as well as decreases soil toxicity by the removal of harmful pollutants. CONCLUSION: The perspective of integrating genetic approach with bioremediation is crucial to evaluate connexions among microbial communities, plant communities and ecosystem processes with a focus on improving phytoremediation of contaminated sites.

Biodegradation of methylene blue dye in a batch and continuous mode using biochar as packing media.

Bacterial species for metabolizing dye molecules were isolated from dye rich water bodies. The best microbial species for such an application was selected amongst the isolated bacterial populations by conducting methylene blue (MB) batch degradation studies with the bacterial strains using NaCl-yeast as a nutrient medium. The most suitable bacterial species was Alcaligenes faecalis (A. faecalis) according to 16S rDNA sequencing. Process parameters were optimized and under the optimum conditions (e.g., inoculum size of 3 mL, temperature of 30 °C, 150 ppm, and time of 5 days), 96.2% of MB was removed. Furthermore, the effectiveness for the separation of MB combining bio-film with biochar was measured by a bio-sorption method in a packed bed bioreactor (PBBR) in which microbes was immobilized. The maximum MB removal efficiencies, when tested with 50 ppm dye using batch reactors containing free A. faecalis cells and the same cells immobilized on the biochar surface, were found to be 81.5% and 89.1%, respectively. The PBBR operated in continuous recycle mode at high dye concentration of 500 ppm provided 87.0% removal of MB through second-order kinetics over 10 days. The % removal was found in the order of PBBR>Immobilized batch>Free cell. The standalone biochar batch adsorption of MB can be described well by the pseudo-second order kinetics (R2 ≥ 0.978), indicating the major contribution of electron exchange-based valence forces in the sorption of MB onto the biochar surface. The Langmuir isotherm suggested a maximum monolayer adsorption capacity of 4.69 mg g-1 at 40 °C which was very close to experimentally calculated value (4.97 mg g-1). Moreover, the Casuarina seed biochar was reusable 5 times.

Application and functional properties of millet starch: Wet milling extraction process and different modification approaches.

In the past decade, the demand and interest of consumers have expanded for using plant-based novel starch sources in different food and non-food processing. Therefore, millet-based value-added functional foods are acquired spare attention due to their excellent nutritional, medicinal, and therapeutic properties. Millet is mainly composed of starch (amylose and amylopectin), which is primary component of the millet grain and defines the quality of millet-based food products. Millet contains approximately 70 % starch of the total grain, which can be used as a, ingredient, thickening agent, binding agent, and stabilizer commercially due to its functional attributes. The physical, chemical, and enzymatic methods are used to extract starch from millet and other cereals. Numerous ways, such as non-thermal physical processes, including ultrasonication, HPP (High pressure processing) high-pressure, PEF (Pulsed electric field), and irradiation are used for modification of millet starch and improve functional properties compared to native starch. In the present review, different databases such as Scopus, Google Scholar, Research Gate, Science Direct, Web of Science, and PubMed were used to collect research articles, review articles, book chapters, reports, etc., for detailed study about millet starch, their extraction (wet milling process) and modification methods such as physical, chemical, biological. The impact of different modification approaches on the techno-functional properties of millet starch and their applications in different sectors have also been reviewed. The data and information created and aggregated in this study will give users the necessary knowledge to further utilize millet starch for value addition and new product development.

Computational study of the performance of a solar dryer for improvement in the shelf life of the food materials.

In this study, the thermal and drying characteristics of a thin layer food sample were investigated. An indirect type, simple, efficient, and economically feasible solar dryer was fabricated and used for food preservation. However, a dynamic model of a fabricated solar dryer was also presented to gain a better insight into the drying and thermal actions. This model consists of thermal modeling of the drying chamber, solar collector, and solar-dried food sample. The law of conservation of energy was applied to evaluate the temperature at different sections of the solar dryer with respect to drying time. All listed model equations were solved in the MATLAB environment. This study helps to examine the influence of solar radiation on the collector plate temperature, drying chamber temperature, food sample temperature, and performance parameters such as thermal efficiency with respect to drying time. Model data was found in good agreement with experimental data within a 4% error. It is concluded that the drying of food material is affected by air temperature, the collector temperature, mode of heat transfer, and material characteristics such as dimension and mass of the food sample.

Solar water splitting for hydrogen production using Zn electrodes: a green and sustainable approach.

The global transition towards clean and sustainable energy sources has led to an increasing interest in green hydrogen production. The present work focuses on the development and assessment of a solar-assisted green hydrogen production system. The basic objective of this work is to investigate the influence of solar radiation to drive the electrolysis process for green hydrogen production. The system design includes photovoltaic solar panel to capture solar radiation and convert it into electrical energy. This energy is further utilized to operate an electrolyzer with zinc electrodes that facilitates the water-splitting reaction resulting in the production of hydrogen gas. The solar panel outputs along with global radiation and other relevant climatic conditions are monitored. The hydrogen production is analyzed at three different voltages, i.e., 11 V, 12 V, and 13 V. After 60 min of operations, the maximum amount of hydrogen (2952 mL) is produced at 13 V. The fabricated electrolyzer has been found suitable and economically feasible.

Microalgae derived honeycomb structured mesoporous diatom biosilica for adsorption of malachite green: Process optimization and modeling.

The present study investigated the removal of malachite green dye from aquifers by means of microalgae-derived mesoporous diatom biosilica. The various process variables (dye concentration, pH, and adsorbent dose) influencing the removal of the dye were optimized and their interactive effects on the removal efficiency were explored by response surface methodology. The pH of the solution (pH = 5.26) was found to be the most dominating among other tested variables. The Langmuir isotherm (R2 = 0.995) best fitted the equilibrium adsorption data with an adsorption capacity of 40.7 mg/g at 323 K and pseudo-second-order model (R2 = 0.983) best elucidated the rate of dye removal (10.6 mg/g). The underlying mechanism of adsorption was investigated by Weber-Morris and Boyd models and results revealed that the film diffusion governed the overall adsorption process. The theoretical investigations on the dye structure using DFT-based chemical reactivity descriptors indicated that malachite green cations are electrophilic, reactive and possess the ability to accept electrons, and are strongly adsorbed on the surface of diatom biosilica. Also, the Fukui function analysis proposed the favorable adsorption sites available on the adsorbent surface.

Natural wax recovery from Musa acuminata biomass using organic solvents.

The main aim of this study is to experimentally investigate the yield of extraction and the presence of wax in the extracted yield from Musaacuminata (banana) biomass based on various functional groups that are present in natural wax. Extraction of natural wax from Musaacuminata (banana) biomass has been done by using the Soxhlet apparatus method in the presence of both polar (ethyl acetate and ethanol) and non-polar (toluene and hexane) solvents. The extracted yield has been found as 3.58% from hexane, 5.16% from toluene, 7.03% from ethyl acetate, and 10.26% from ethanol. The wax was also found in the extracted yield only in the case of nonpolar solvents (toluene and hexane). The novelty of this work is that Musaacuminata (banana) waste biomass has been utilized to recover the natural wax using nonpolar solvents and also compared with that of polar solvents to check the scope of wax extraction using polar solvents. Also, statistical analysis has been performed of the extracted yield using both solvents. Thin Layer Chromatography (TLC) and Fourier Transform Infrared Spectroscopy (FTIR) methods have been used to determine the various hydrocarbon chains present in the extracted yield which is similar to that of natural wax.

Potable water production through a low-cost single chamber solar still in north India.

The main aim of this study is to evaluate the performance of a single slope solar still and to assess the effect of nanofluid on its performance. A single basin single slope solar still was designed and fabricated at the Department of Chemical Engineering, IET Lucknow. Its performance was assessed in terms of the yield of potable water. The effect of various climatic parameters was also studied. Al2O3 nanofluid was used to enhance the yield of the solar still. In the presence of nanofluid, the total yield of the solar still improved by 16.6%. Its economic feasibility was analyzed and reported. The portability of the small size of solar stills, its better economics, easy fabrication, and good performance make them very useful for industrial as well as household purposes.

Optimizing crop quality and yield: Assessing the impact of integrated potassium management on Chinese cabbage (Brassica rapa L. subsp. chinensis).

Potassium, a pivotal macronutrient essential for growth, development, and crop yield, serves as a critical determinant of soil productivity. Its depletion disrupts the equilibrium of soil nutrients, prompting an investigation into integrated potassium management strategies to address this challenge. A field experiment was conducted during the winter season of 2020 using a randomized complete block design, with eight treatments, each replicated three times in Chinese cabbage (Brassica rapa L. subsp. chinensis). These treatments comprised standard (100 %) and reduced (75 % and 50 %) rates of the recommended dose of potassium (RDK) via muriate of potash (MOP). Variations in the inclusion and exclusion of plant growth-promoting rhizobacteria (PGPR), farmyard manure (FYM) as 25 % of the potassium recommendation, and foliar spray of nano potash were systematically implemented. Findings unequivocally demonstrated that the treatmentT8, involving 100 % RDK +25 % K through FYM + PGPR + nano K fertilizer spray at 25 and 40 DAS, yielded significant improvements in both green fodder (64.0 t ha-1) and dry fodder (7.87 t ha-1).Moreover, T8 exhibited the highest values for total ash (8.75 %), total ash yield (68.9 ± 2.88 kg ha-1), ether extract (2.85 %), ether extract yield (22.4 ± 0.88 kg ha-1), crude protein (9.71 %), and total crude protein yield (76.4 ± 3.21 kg ha-1). Conversely, a marked reduction was observed in various fiber components and carbohydrate fractions upon application of the T8 treatment. The lowest values of yield, crude protein content, total ash ether extract were recorded in treatment T1 (control) applied with no potassium. This investigation underscores the inadequacy of the recommended potassium dose in achieving optimal productivity, necessitating a re-evaluation of potassium fertilization levels. The integrated approach involving FYM, PGPR, and nano potash, coupled with the recommended potassium dose through MOP, emerges as a promising avenue for augmenting both yield and quality parameters in Chinese cabbage.

Unlocking growth potential: Synergistic potassium fertilization for enhanced yield, nutrient uptake, and energy fractions in Chinese cabbage.

The implementation of integrated potassium management presents a viable approach for augmenting plant growth, yield, and nutrient uptake while enhancing soil nutrient availability. A field experiment was executed during the rabi season of 2020, employing a randomized complete block design encompassing eight treatments involving standard (100%) and reduced (75% and 50%) rates of the recommended dose of potassium (RDK) administered through muriate of potash (MOP). Treatments included variations in the incorporation/exclusion of plant growth-promoting rhizobacteria (PGPR), farmyard manure (FYM) at 25% of potassium recommendation, and foliar application of nano potash. The use of 100% RDK +25% K augmentation through FYM + PGPR and nano K fertilizer spray at 25 and 40 DAS (T8) exhibited significant enhancements in green fodder yield (64.0 ± 2.2 t ha-1) over control with no potassium application (47.3 ± 3.7 t ha-1) and found at par with and 75% RDK + 25% K augmentation through FYM + PGPR and nano K fertilizer spray at 25 and 40 DAS (T7). These treatments yielded maximum percent increase for plant height (34.9%), leaf count (38.5%), leaf dimensions (28.8-31.5%), stem girth (25.84%), root volume (27.0%), and root length (37.64%), observed at the harvest stage compared to control (T1-no potassium application). The treatment T8 was on par with T7 and recorded highest uptake of macro (N, P, and K) and micro (Zn, Fe, Cu, and Mn) nutrients. While soil parameters such as available nitrogen and potassium levels were notably increased through the application of treatment T7 across various treatment combinations and found significantly superiority over treatment T8. Multivariate analysis also highlighted treatment T7 is more efficient in maintaining sustainability. Hence, based on the present findings it can be concluded that application of 75% RDK +25% K augmentation through FYM + PGPR and nano K fertilizer spray at 25 and 40 DAS (T7) can be recommended for achieving enhanced productivity and soil fertility improvement within agricultural systems.

Treatment of waste gas containing low concentration of dimethyl sulphide in a high performance biotrickling filter.

A bench-scale biotrickling filter was operated in the laboratory for the treatment of dimethyl sulphide (DMS). The biotrickling filter was packed with pre-sterilized polyurethane foam and seeded with biomass developed from garden soil enriched with DMS. The biotrickling filter was operated for the generation of process parameters. The biotrickling filter could remove an average removal efficiency of 40.95% at an effective bed contact time of 84 sec with an average loading rate of 0.56 mg/m3/h. Evaluation of microbiological status of the biotrickling filter indicated the presence of other bacterial cultures viz. Paenibacillus polymyxa, and Bacillus megaterium, besides Bacillus sphaericus.

Adsorptive removal of ciprofloxacin and sulfamethoxazole from aqueous matrices using sawdust and plastic waste-derived biochar: A sustainable fight against antibiotic resistance.

We produced carbon-negative biochar from the pyrolysis of sawdust biomass alone (SB) and from the co-pyrolysis of sawdust and plastic waste (SPB). The co-pyrolysis approach in this study was driven by several hypothetical factors, such as increased porosity, surface chemistry, stability, as well as waste management. We applied pyrolyzed and co-pyrolyzed biochars for the removal of ciprofloxacin (CFX) and sulfamethoxazole (SMX). Due to its more alkaline and amorphous nature, SB showed better removal efficiencies compared to SPB. The maximum removals of CFX and SMX with SB were observed as ∼95% and >95%, respectively whereas with SPB were 58.8%, and 34.9%, respectively. The primary mechanisms involved in the adsorption process were H-bonding, electrostatic and π-π electron donor-acceptor interactions. Homogenously and heterogeneously driven adsorption of both antibiotics followed the pseudo-second-order kinetic model, implying electron sharing/transfer (chemisorption) mediated adsorption. The work is highly pertinent in the context of emerging concerns related to drivers that promote antimicrobial resistance.

Sustainable rural waste management using biogas technology: An analytical hierarchy process decision framework.

Biomass is present in ample amounts in rural areas, mainly in agriculture residue and animal wastes. Biogas can be produced from rural solid waste, providing affordable clean energy for rural households and a prominent solution to solid waste management. Despite having several benefits of using biogas, the contribution of biogas in rural areas is not as much as expected. Several technical and non-technical barriers are accountable for the slow rate of biogas technology adoption in rural households. Nineteen barriers to household biogas plant adoption in four dimensions of technical, economic, market, and awareness are identified and ranked with the analytical hierarchy process (AHP) in the perspective of rural India. The outcome of the barrier dimension reveals that the economic dimension gets the highest weight of (0.350), followed by the market with a weight of (0.322). At the same time, high installation cost with a weight of (0.141) dominates in the category of barriers, followed by competition from freely available fuel with a weight of 0.105). The gap in capital cost and capital subsidy, lack of paying capacity, and lack of easy credit have positioned respectively third, fourth, and fifth in the overall ranking of barriers with weights of (0.094), (0.084), and (0.08). This paper may contribute significantly to creating greater awareness, evaluating numerous barriers, and adopting biogas technology in India more effectively and efficiently.

Advances in the development of electrode materials for improving the reactor kinetics in microbial fuel cells.

Microbial fuel cells (MFCs) are an emerging technology for converting organic waste into electricity, thus providing potential solution to energy crises along with eco-friendly wastewater treatment. The electrode properties and biocatalysts are the major factors affecting electricity production in MFC. The electrons generated during microbial metabolism are captured by the anode and transferred towards the cathode via an external circuit, causing the flow of electricity. This flow of electrons is greatly influenced by the electrode properties and thus, much effort has been made towards electrode modification to improve the MFC performance. Different semiconductors, nanostructured metal oxides and their composite materials have been used to modify the anode as they possess high specific surface area, good biocompatibility, chemical stability and conductive properties. The cathode materials have also been modified using metals like platinum and nano-composites for increasing the redox potential, electrical conductivity and surface area. Therefore, this paper reviews the recent developments in the modification of electrodes towards improving the power generation capacity of MFCs.

An analytical hierarchy process based decision support system for the selection of biogas up-gradation technologies.

Recent developments in biogas upgradation have opened new horizons for its utilisation because upgradation technologies are fully developed and commercially available. However, the implementation of biogas upgrading technologies is not at the scale required to harness the full potential of biogas. Therefore, it is requisite to adopt a multicriteria decision-making methodology (MCDM) to select the most appropriate biogas up-gradation technology as each technology has its own set of benefits and downside. In this multifaceted scenario, the analytical hierarchy Process (AHP), one of the most preferred MCDM methods in rational decision-making, is applied in this study to select the most appropriate biogas upgrading technology. The broader recognition of AHP is its provision for converting multifaceted problems into a simple hierarchy. The research results reveal that biogas up-gradation technologies based on water scrubbing and membrane separation rank first and second among the alternatives. This research will show a direction to researchers and the MCDM community involved in biogas upgradation technologies on a broader scale.