RESUMEN
This article proposes solid-like systems from sunflower oil structured with a fibrillar network built by the assembly of 12-hydroxystearic acid (12-HSA), a gelator molecule for an oil phase. The resulting organogels were studied as oral controlled release formulations for a lipophilic drug, Efavirenz (EFV), dissolved in the oil. The effects of the gelator concentration on the thermal properties of the organogels were studied by Differential Scanning Calorimetry (DSC) and showed that drug incorporation did not change the sol-gel-sol transitions. The erosion and drug release kinetics from organogels under conventional (filling gelatin capsules) or multiparticulate (beads obtained by prilling) dosage forms were measured in simulated gastric and intestinal fluids. EFV release profiles were analyzed using model-dependent (curve-fitting) and independent approaches (Dissolution Efficiency DE). Korsmeyer-Peppas was the best fitting release kinetic model based on the goodness of fit, revealing a release mechanism from organogels loaded with EFV different from the simple drug diffusion release mechanism obtained from oily formulations. From organogels, EFV probably diffuses through an outer gel layer that erodes releasing oil droplets containing dissolved EFV into the aqueous medium.
Asunto(s)
Benzoxazinas/química , Preparaciones de Acción Retardada/química , Geles/química , Administración Oral , Alquinos , Química Farmacéutica/métodos , Ciclopropanos , Difusión , Portadores de Fármacos/química , Composición de Medicamentos/métodos , Sistemas de Liberación de Medicamentos/métodos , Liberación de Fármacos , Gelatina/química , Interacciones Hidrofóbicas e Hidrofílicas , Cinética , Aceites de Plantas/química , Solubilidad , Aceite de GirasolRESUMEN
In the challenging quest for a solution to reduce the risk of implant-associated infections in bone substitution surgery, the use of silver ions is promising regarding its broad spectrum on planktonic, sessile as well as multiresistant bacteria. In view of controlling its delivery in situ at the desired dose, we investigated its encapsulation in carboxymethyl cellulose (CMC) microparticles by spray-drying and included the latter in the formulation of a self-setting calcium phosphate bone cement. We implemented an original step-by-step methodology starting from the in vitro study of the antibacterial properties and cytotoxicity of two silver salts of different solubility in aqueous medium and then in the cement to determine the range of silver loading able to confer anti-biofilm and non-cytotoxic properties to the biomaterial. A dose-dependent efficiency of silver was demonstrated on the main species involved in bone-implant infection (S. aureus and S. epidermidis). Loading silver in microspheres instead of loading it directly inside the cement permitted to avoid undesired silver-cement interactions during setting and led to a faster release of silver, i.e. to a higher dose released within the first days combining anti-biofilm activity and preserved cytocompatibility. In addition, a combined interest of the introduction of about 10% (w/w) silver-loaded CMC microspheres in the cement formulation was demonstrated leading to a fully injectable and highly porous (77%) cement, showing a compressive strength analogous to cancellous bone. This injectable silver-loaded biomimetic composite cement formulation constitutes a versatile bone substitute material with tunable drug delivery properties, able to fight against bone implant associated infection. STATEMENT OF SIGNIFICANCE: This study is based on two innovative scientific aspects regarding the literature: i) Choice of silver ions as antibacterial agent combined with their way of incorporation: Carboxymethylcellulose has never been tested into bone cement to control its drug loading and release properties. ii) Methodology to formulate an antibacterial and injectable bone cement: original and multidisciplinary step-by-step methodology to first define, through (micro)biological tests on two silver salts with different solubilities, the targeted range of silver dose to include in carboxymethylcellulose microspheres and, then optimization of silver-loaded microparticles processing to fulfill requirements (encapsulation efficiency and size). The obtained fully injectable composite controls the early delivery of active dose of silver (from 3 h and over 2 weeks) able to fight against bone implant-associated infections.
Asunto(s)
Cementos para Huesos , Plata , Antibacterianos/farmacología , Cementos para Huesos/farmacología , Fosfatos de Calcio , Carboximetilcelulosa de Sodio/farmacología , Sales (Química) , Plata/farmacología , Staphylococcus aureus , Staphylococcus epidermidisRESUMEN
Polysaccharidic scaffolds hold great hope in regenerative medicine, however their sterilization still remains challenging since conventional methods are deleterious. Recently, electron beams (EB) have raised interest as emerging sterilization techniques. In this context, the aim of this work was to study the impact of EB irradiations on polysaccharidic macroporous scaffolds. The effects of continuous and pulsed low energy EB were examined on polysaccharidic or on polyelectrolyte complexes (PEC) scaffolds by SEC-MALLS, FTIR and EPR. Then the scaffolds' physicochemical properties: swelling, architecture and compressive modulus were investigated. Finally, sterility and in vitro biocompatibility of irradiated scaffolds were evaluated to validate the effectiveness of our approach. Continuous beam irradiations appear less deleterious on alginate and chitosan chains, but the use of a pulsed beam limits the time of irradiation and better preserve the architecture of PEC scaffolds. This work paves the way for low energy EB tailor-made sterilization of sensitive porous scaffolds.
RESUMEN
In this study we evaluate macroporous scaffolds made of alginate-chitosan polyelectrolyte complexes (PEC) as tools to optimize the results of soft tissues cell therapy. Cell therapy using mesenchymal stem cells (MSC) has become attractive for tissue repair and regeneration in a number of acute and chronic injuries. Unfortunately their low retention and/or survival after injection limit their beneficial effects. A biomaterial-assisted implantation, providing cells a three-dimensional (3D) microenvironment is a promising strategy. To this purpose, we designed a family of PEC scaffolds, and studied if they could meet the requirement of such application. Xray tomography showed that all PEC scaffolds present an interconnected macroporosity, and both rheology and tensile measurements reveal optimized mechanical properties (higher storage moduli and Young moduli) compared to alginate reference scaffolds. In vitro assays demonstrated their ability to allow MSC retention (higher than 90%), long-term viability and FGF2 secretion. Then, we used a skeletal muscle implantation model to assess the biological response to scaffolds graft, and showed that they support in vivo vascular formation within the implant-derived tissue. The combination of alginate/chitosan PEC scaffolds architecture and angiogenic potential make them appear as interesting tools to optimize MSC therapy results in soft tissues.
Asunto(s)
Alginatos/administración & dosificación , Quitosano/administración & dosificación , Isquemia/terapia , Trasplante de Células Madre Mesenquimatosas , Polielectrolitos/administración & dosificación , Andamios del Tejido/química , Alginatos/química , Animales , Materiales Biocompatibles/administración & dosificación , Materiales Biocompatibles/química , Proliferación Celular , Supervivencia Celular , Células Cultivadas , Quitosano/química , Terapia Combinada/métodos , Modelos Animales de Enfermedad , Estudios de Factibilidad , Femenino , Humanos , Masculino , Ensayo de Materiales , Células Madre Mesenquimatosas , Polielectrolitos/química , Porosidad , Cultivo Primario de Células , Ratas , Ratas Endogámicas Lew , Ingeniería de TejidosRESUMEN
Controlling microarchitecture in polymer scaffolds is a priority in material design for soft tissue applications. This paper reports for the first time the elaboration of alginate foam-based scaffolds for mesenchymal stem cell (MSC) delivery and a comparative study of various surfactants on the final device performance. The use of surfactants permitted to obtain highly interconnected porous scaffolds with tunable pore size on surface and in cross-section. Their mechanical properties in compression appeared to be adapted to soft tissue engineering. Scaffold structures could sustain MSC proliferation over 14 days. Paracrine activity of scaffold-seeded MSCs varied with the scaffold structure and growth factors release was globally improved in comparison with control alginate scaffolds. Our results provide evidence that exploiting different surfactant types for alginate foam preparation could be an original method to obtain biocompatible scaffolds with tunable architecture for soft tissue engineering.
Asunto(s)
Alginatos/química , Materiales Biocompatibles , Células Madre Mesenquimatosas/citología , Ingeniería de Tejidos , Andamios del Tejido , Ácido Glucurónico/química , Ácidos Hexurónicos/química , Humanos , PorosidadRESUMEN
Nanocrystalline calcium phosphate apatites constitute the mineral part of hard tissues, and the synthesis of biomimetic analogs is now well-mastered at the lab-scale. Recent advances in the fine physico-chemical characterization of these phases enable one to envision original applications in the medical field along with a better understanding of the underlying chemistry and related pharmacological features. In this contribution, we specifically focused on applications of biomimetic apatites in the field of cancer diagnosis or treatment. We first report on the production and first biological evaluations (cytotoxicity, pro-inflammatory potential, internalization by ZR-75-1 breast cancer cells) of individualized luminescent nanoparticles based on Eu-doped apatites, eventually associated with folic acid, for medical imaging purposes. We then detail, in a first approach, the preparation of tridimensional constructs associating nanocrystalline apatite aqueous gels and drug-loaded pectin microspheres. Sustained releases of a fluorescein analog (erythrosin) used as model molecule were obtained over 7 days, in comparison with the ceramic or microsphere reference compounds. Such systems could constitute original bone-filling materials for in situ delivery of anticancer drugs.