Interaction of Hydrophobic Ionic Liquids with Lipids in Langmuir Monolayers.

The interaction of two ionic liquids, trihexyl(tetradecyl)phosphonium bis(trifluoromethylsulfonyl)-imide and trihexyl(tetradecyl)phosphonium dicyanamide, [P6 6 6 14][Ntf2] and [P6 6 6 14]/[N(CN)2], with several long-chained lipids with a different net charge at the hydrophilic group, a cationic surfactant, dioctadecyldimethylammonium bromide (DODAB), a zwitterionic phospholipid (DPPC), an anionic phospholipid (DPPG), and the neutral stearic acid (SA), was investigated at the air-water interface using the Langmuir trough technique. The experimental surface pressure-area (π- A) isotherms obtained for selected compositions of each binary system reveal distinct interfacial behavior. The degree and the nature of the IL-lipid interaction strongly depend on the charge distribution in the lipid polar group. Miscibility, or immiscibility, at the monolayer was inferred from the comparison of the experimental π- A isotherm with the theoretical curve calculated for the corresponding ideal mixture based on the π- A isotherms of the pure components. Phase separation and partial miscibility occurred in IL/DODAB and IL/DPPC systems, respectively. In both the IL/DPPG and the IL/SA systems, a new catanionic complex was found. For the IL/SA system, the catanionic complex formation varies with the subphase pH.

Ionic Liquid Films at the Water-Air Interface: Langmuir Isotherms of Tetra-alkylphosphonium-Based Ionic Liquids.

The behavior of ionic liquids trihexyl(tetradecyl)phosphonium bis(trifluoromethylsulfonyl)imide and trihexyl(tetradecyl)phosphonium dicyanamide, [P6 6 6 14][Ntf2] and [P6 6 6 14][N(CN)2], respectively, at the water-air interface was investigated using the Langmuir trough technique. The obtained surface pressure versus mean molecular area (MMA) isotherms, π-A, and surface potential versus MMA isotherms, ΔV-A, show distinct interfacial behavior between the two systems. The results were interpreted at a molecular level using molecular dynamics simulations: the different compression regimes along the [P6 6 6 14][Ntf2] isotherm correspond to the self-organization of the ions at the water surface into compact and planar monolayers that coalesce at an MMA value of ca. 1.85 nm(2)/ion pair to form an expanded liquidlike layer. Upon further compression, the monolayer collapses at around 1.2 nm(2)/ion pair to yield a progressively thicker and less organized layer. These transitions are much more subdued in the [P6 6 6 14][N(CN)2] system because of the more hydrophilic nature of the dicyanamide anion. The numerical density profiles obtained from the MD simulation trajectories are also able to emphasize the very unusual packing of the four long alkyl side chains of the cation above and below the ionic layer that forms at the water surface. Such a distribution is also different for the two studied systems during the different compression regimes.

Effect of glucosylceramide on the biophysical properties of fluid membranes.

Glucosylceramide (GlcCer), a relevant intermediate in the pathways of glycosphingolipid metabolism, plays key roles in the regulation of cell physiology. The molecular mechanisms by which GlcCer regulates cellular processes are unknown, but might involve changes in membrane biophysical properties and formation of lipid domains. In the present study, fluorescence spectroscopy, confocal microscopy and surface pressure-area (π-A) measurements were used to characterize the effect of GlcCer on the biophysical properties of model membranes. We show that C16:0-GlcCer has a high tendency to segregate into highly ordered gel domains and to increase the order of the fluid phase. Monolayer studies support the aggregation propensity of C16:0-GlcCer. π-A isotherms of single C16:0-GlcCer indicate that bilayer domains, or crystal-like structures, coexist within monolayer domains at the air-water interface. Mixtures with POPC exhibit partial miscibility with expansion of the mean molecular areas relative to the additive behavior of the components. Moreover, C16:0-GlcCer promotes morphological alterations in lipid vesicles leading to formation of flexible tubule-like structures that protrude from the fluid region of the bilayer. These results support the hypothesis that alterations in membrane biophysical properties induced by GlcCer might be involved in its mechanism of action.

Influence of intracellular membrane pH on sphingolipid organization and membrane biophysical properties.

Glucosylceramide (GlcCer) is a signaling lipid involved in the regulation of several cellular processes. It is present in different organelles, including the plasma membrane, Golgi apparatus, endoplasmic reticulum, and lysosomes. Accordingly, GlcCer is exposed to different pH environments in each organelle, which may lead to alterations in its properties and lateral organization and subsequent biological outcome. In this study, we addressed the effect of pH on the biophysical behavior of this lipid and other structurally related sphingolipids (SLs). Membranes composed of POPC (1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine) and C16-GlcCer, sphingomyelin, and different acyl chain ceramides were characterized by fluorescence spectroscopy, confocal microscopy, and surface pressure-area measurements under neutral and acidic conditions. The results show that changing the pH from 7.4 to 5.5 has a larger impact on C16-GlcCer-containing membranes compared to other SLs. In addition, acidification mainly affects the organization and packing properties of the GlcCer-enriched gel phase, suggesting that the interactions established by the glucose moiety, in the GlcCer molecule, are those most affected by the increase in the acidity. These results further highlight the role of GlcCer as a modulator of membrane biophysical properties and will possibly contribute to the understanding of its biological function in different organelles.

Microphase separation in mixed monolayers of DPPG with a double hydrophilic block copolymer at the air-water interface: a BAM, LSCFM, and AFM study.

Phase separation and interactions in mixed monolayers of dipalmitoylphosphatidylglycerol (DPPG) with the rhodamine B end-labeled double-hydrophilic block copolymer (DHBC), poly(N,N-dimethylacrylamide)-block-poly(N,N-diethylacrylamide) (RhB-PDMA(207)-b-PDEA(177)), was studied at the air-water interface. Surface pressure versus area isotherms indicate that both components behave almost independently. Brewster angle microscopy (BAM) images show a random distribution of liquid condensed (LC) domains of DPPG in an apparent homogeneous matrix of DHBC, excluding the macroscopic phase separation. The laser scanning confocal fluorescence microscopy (LSCFM) of the rhodamine dye at the end of the PDMA chain showed how the DHBC is distributed in Langmuir-Blodgett (LB) mixed monolayers. The high spatial resolution of atomic force microscopy (AFM) combined with the LCSFM images indicates that DHBC incorporates in the expanded phase of DPPG to form mixed domains, being excluded from the condensed regions. Upon compression, nanosized LC domains of DPPG nucleate inside the mixed domains corralled in the nanopatterning of pure DHBC. The negatively charged polar group of DPPG inhibits rhodamine aggregation, while the long polymer chains promote the formation of corralled nanodomains of DPPG in two dimensions.

Schizophrenic behavior of a thermoresponsive double hydrophilic diblock copolymer at the air-water interface.

The thermoresponsive behavior of the rhodamine B end-labeled double hydrophilic block copolymer (DHBC) poly(N,N-dimethylacrylamide)-b-poly(N,N-diethylacrylamide) (RhB-PDMA(207)-b-PDEA(177)) and the 1:1 segmental mixture of PDEA and rhodamine B end-labeled PDMA homopolymers was studied over the range of 10-40 degrees C at the air-water interface. The increase in collapse surface pressure (second plateau regime) of the DHBC with temperature confirms the thermoresponsiveness of PDEA at the interface. The sum of the pi-A isotherms of the two single homopolymers weighted by composition closely follows the pi-A isotherm of the DHBC, suggesting that the behavior of each block of the DHBC is not influenced by the presence of the other block. Langmuir-Blodgett monolayers of DHBC deposited on glass substrates were analyzed by laser scanning confocal fluorescence microscopy (LSCFM), showing schizophrenic behavior: at low temperature, the RhB-PDMA block dominates the inside of bright (core) microdomains, switching to the outside (shell) at temperatures above the lower critical solution temperature (LCST) of PDEA. This core-shell inversion triggered by the temperature increase was not detected in the homopolymer mixture. The present results suggest that both the covalent bond between the two blocks of the DHBC and the tendency of rhodamine B to aggregate play a role in the formation of the bright cores at low temperature whereas PDEA thermoaggregation is responsible for the formation of the dark cores above the LCST of PDEA.

Phase behaviour of binary mixtures involving tristearin, stearyl stearate and stearic acid: thermodynamic study and BAM observation at the air-water interface and AFM analysis of LB films.

The binary mixtures involving tristearin (TS), stearyl stearate (SS) and stearic acid (SA) were studied by surface pressure-area (pi-A) measurements and by Brewster angle microscopy (BAM), at the air-water interface, and the Langmuir-Blodgett (LB) monolayers, transferred onto mica substrates, were analysed by AFM. The thermodynamic analysis indicated miscibility in the whole composition range for the system SA/TS, and partial miscibility for systems SA/SS and TS/SS. This behaviour was further confirmed by BAM observation and AFM analysis of LB films. The AFM imaging of collapsed monolayers revealed domains with a multilayered structure varying with system and composition. The layers thickness determined by cross section analysis are consistent with estimated molecular lengths and conformations proposed for the molecules, assuming nearly perpendicular or tilted orientations of the hydrocarbon chains to the interface.

Microdomains in mixed monolayers of oleanolic and stearic acids: thermodynamic study and BAM observation at the air-water interface and AFM and FTIR analysis of LB monolayers.

Monolayers of oleanolic acid (OLA) mixed with stearic acid (SA) were studied at the air-water interface. The surface pressure-area (pi-A) isotherms, measured over the whole composition range, and BAM observations were used to investigate the phase behaviour and self-organization of these components in a two-dimensional structure. Pure OLA forms a very compressible monolayer, and BAM observation revealed the coexistence of large and irregular solid domains of different thickness dispersed in a gas matrix, compatible with the two most probable orientations of the OLA molecule at the interface. Mixtures of OLA/SA form condensed monolayers from low surface pressures and the thermodynamic analysis indicates that OLA molecules, in the presence of the long-chain SA, orient with the major axis almost perpendicular to the interface. Langmuir-Blodgett (LB) monolayers of pure SA and mixtures were further characterized by atomic force microscopy (AFM) and Fourier transform infrared spectroscopy (FTIR). AFM images of LB mixed monolayers evidenced microphase separation, not observable by BAM. The SA rich domains are 4-6A thicker than those rich in OLA. The FTIR spectra of mixed LB films on CaF2 substrates showed that OLA does not perturb the all-trans conformation of the SA long alkyl chains, up to a mole fraction of 0.4. The carbonyl-stretching band of OLA suggests that the carboxylic groups of neighbour OLA molecules are involved in hydrogen bonds, forming dimers, as in pure solid phase OLA. These interactions seem to prevail over the OLA-water hydrogen bonds.

Radiation damage on Langmuir monolayers of the anionic 1.2-dipalmitoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (sodium salt)(DPPG) phospholipid at the air-DNA solution interface.

The resilience of cells to ultraviolet (UV) irradiation is probably associated with the effects induced in biological molecules such as DNA and in the cell membrane. In this study, we investigated UV damage to the anionic 1.2-dipalmitoyl-sn-glycero-3-[phospho-rac-(1-glycerol)] (sodium salt) (DPPG) phospholipid, which is an important component of cell membranes. In films cast from DPPG emulsions, UV irradiation induced cleavage of C-O, C=O and -PO(2-) bonds, while in Langmuir monolayers at the air/water interface representing the cell membrane this irradiation caused the monolayer stability to decrease. When DNA was present in the subphase, however, the effects from UV irradiation were smaller, since the ionic products from degradation of either DPPG or DNA stabilize the intact DPPG molecules. This mechanism may explain why UV irradiation does not cause immediate cell collapse, thus providing time for the cellular machinery to repair elements damaged by UV.

Phase behaviour of oleanolic acid, pure and mixed with stearic acid: Interactions and crystallinity.

The phase behaviour of pure oleanolic acid (OLA) and in mixtures with stearic acid (SA) was characterized by differential scanning calorimetry (DSC), X-ray powder diffraction (XRD), diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) and nuclear magnetic resonance (NMR). The crystalline OLA as received (OLA(ar)) becomes amorphous after being dissolved in chloroform and vacuum-dried at 50 degrees C (OLA(50)). Upon heating, both forms transform to the needle shape crystalline form (OLA(220)). Dimerization through H-bonding between COOH groups was detected both in OLA(ar) and OLA(220). Dimers are stronger in OLA(220), where H-bonding also involves the alcohol groups and plays a role in the crystalline organization. A eutectic type phase diagram was established for mixtures, with the eutectic composition close to pure SA. Mixtures rich in SA are miscible in the liquid and in the amorphous solid states, where the presence of SA-OLA co-dimers, formed through H-bonding between carboxyl groups, was detected. Miscibility and SA crystallinity decrease drastically with the OLA content.

Phase behaviour of oleanolic acid/stearyl stearate binary mixtures in bulk and at the air-water interface.

The solid-liquid phase behaviour of oleanolic acid (OLA)/stearyl stearate (SS) was investigated by differential scanning calorimetry and polarizing optical microscopy. A eutectic type diagram, with the eutectic composition close to pure SS was obtained. Complementary studies by NMR, X-ray diffraction (XRD) and diffuse reflectance infrared Fourier transform (DRIFT) spectroscopy were performed. A mutual influence was detected in mixtures: the low melting form of SS is favoured at low OLA molar fractions (X(OLA)) and spherulitic structures appear at high X(OLA) and high temperature. Additionally, H-bonding between OLA carbonyl groups increases in the presence of SS. The study of OLA/SS by the Langmuir method and Brewster angle microscopy revealed the organization at the air-water interface: OLA interacts with water in the first layer, while SS is completely segregated to the upper layer for X(OLA)>0.3, and it distributes in the first and upper layers for X(OLA)<0.3.

Thermo-responsiveness of poly(N,N-diethylacrylamide) polymers at the air-water interface: The effect of a hydrophobic block.

The poly(N,N-diethylacrylamide) (h-PDEA) homopolymer and the poly(N-decylacrylamide)-b-PDEA (PDcA(11)-b-PDEA(231)) diblock copolymer were studied in the range of 10 to 40 degrees C, at the air-water interface. The pi-A isotherms of h-PDEA appear nearly invariant with temperature while the pi-A isotherms of PDcA(11)-b-PDEA(231) deviate significantly to lower areas with the temperature increase evidencing the thermo-responsiveness of this diblock copolymer at the interface. For the copolymer, the limiting area per segment versus temperature shows a break point around 29 degrees C, slightly lower than the lower critical solution temperature (LCST) of h-PDEA in water (31-33 degrees C). AFM images of LB monolayers transferred at 40 degrees C revealed for both polymers the presence of hydrophobic aggregates due to the conformational changes (collapse) of chains that occur at the LCST. Differences in the morphology of these aggregates, flat irregular structures for h-PDEA and round-shaped domains for PDcA(11)-b-PDEA(231), were related with the condensing effect of the hydrophobic block. The PDcA(11) block, anchoring the polymer to the interface, ensures a better stability and cohesion to the film and preserves the thermo-sensitivity of the h-PDEA at the interface.