RESUMEN
The nuclear envelope (NE) separates genomic DNA from the cytoplasm and regulates transport between the cytosol and the nucleus in eukaryotes. Nuclear stiffening enables the cell nucleus to protect itself from extensive deformation, loss of NE integrity, and genome instability. It is known that the reorganization of actin, lamin, and chromatin can contribute to nuclear stiffening. In this work, we show that structural alteration of NE also contributes to instantaneous nuclear stiffening under indentation. In situ mechanical characterization of cell nuclei in intact cells shows that nuclear stiffening and unfolding of NE wrinkles occur simultaneously at the indentation site. A positive correlation between the initial state of NE wrinkles, the unfolding of NE wrinkles, and the stiffening ratio (stiffness fold-change) is found. Additionally, NE wrinkles unfold throughout the nucleus outside the indentation site. Finite element simulation, which involves the purely passive process of structural unfolding, shows that unfolding of NE wrinkles alone can lead to an increase in nuclear stiffness and a reduction in stress and strain levels. Together, these results provide a perspective on how cell nucleus adapts to mechanical stimuli through structural alteration of the NE.
Asunto(s)
Núcleo Celular , Membrana Nuclear , Cromatina , Citosol , CitoplasmaRESUMEN
Emerging heart-on-a-chip technology is a promising tool to establish in vitro cardiac models for therapeutic testing and disease modeling. However, due to the technical complexity of integrating cell culture chambers, biosensors, and bioreactors into a single entity, a microphysiological system capable of reproducing controlled microenvironmental cues to regulate cell phenotypes, promote iPS-cardiomyocyte maturity, and simultaneously measure the dynamic changes of cardiomyocyte function in situ is not available. This paper reports an ultrathin and flexible bioelectronic array platform in 24-well format for higher-throughput contractility measurement under candidate drug administration or defined microenvironmental conditions. In the array, carbon black (CB)-PDMS flexible strain sensors were embedded for detecting iPSC-CM contractility signals. Carbon fiber electrodes and pneumatic air channels were integrated to provide electrical and mechanical stimulation to improve iPSC-CM maturation. Performed experiments validate that the bioelectronic array accurately reveals the effects of cardiotropic drugs and identifies mechanical/electrical stimulation strategies for promoting iPSC-CM maturation.
Asunto(s)
Técnicas Biosensibles , Células Madre Pluripotentes Inducidas , Miocitos Cardíacos , Técnicas de Cultivo de Célula , Preparaciones Farmacéuticas , Diferenciación CelularRESUMEN
Swarms, which stem from collective behaviors among individual elements, are commonly seen in nature. Since two decades ago, scientists have been attempting to understand the principles of natural swarms and leverage them for creating artificial swarms. To date, the underlying physics; techniques for actuation, navigation, and control; field-generation systems; and a research community are now in place. This Review reviews the fundamental principles and applications of micro/nanorobotic swarms. The generation mechanisms of the emergent collective behaviors among the micro/nanoagents identified over the past two decades are elucidated. The advantages and drawbacks of different techniques, existing control systems, major challenges, and potential prospects of micro/nanorobotic swarms are discussed.
RESUMEN
Glioblastoma (GBM) is the most common and aggressive primary brain cancer. Despite multimodal treatment including surgery, radiotherapy, and chemotherapy, median patient survival has remained at ~15 months for decades. This situation demands an outside-the-box treatment approach. Using magnetic carbon nanotubes (mCNTs) and precision magnetic field control, we report a mechanical approach to treat chemoresistant GBM. We show that GBM cells internalize mCNTs, the mobilization of which by rotating magnetic field results in cell death. Spatiotemporally controlled mobilization of intratumorally delivered mCNTs suppresses GBM growth in vivo. Functionalization of mCNTs with anti-CD44 antibody, which recognizes GBM cell surface-enriched antigen CD44, increases mCNT recognition of cancer cells, prolongs mCNT enrichment within the tumor, and enhances therapeutic efficacy. Using mouse models of GBM with upfront or therapy-induced resistance to temozolomide, we show that mCNT treatment is effective in treating chemoresistant GBM. Together, we establish mCNT-based mechanical nanosurgery as a treatment option for GBM.
Asunto(s)
Neoplasias Encefálicas , Glioblastoma , Nanotubos de Carbono , Ratones , Animales , Glioblastoma/metabolismo , Neoplasias Encefálicas/tratamiento farmacológico , Neoplasias Encefálicas/cirugía , Neoplasias Encefálicas/metabolismo , Temozolomida/farmacología , Temozolomida/uso terapéutico , Muerte Celular , Línea Celular TumoralRESUMEN
Major obstacles in brain cancer treatment include the blood-tumor barrier (BTB), which limits the access of most therapeutic agents, and quiescent tumor cells, which resist conventional chemotherapy. Here, we show that Sox2+ tumor cells project cellular processes to ensheathe capillaries in mouse medulloblastoma (MB), a process that depends on the mechanosensitive ion channel Piezo2. MB develops a tissue stiffness gradient as a function of distance to capillaries. Sox2+ tumor cells perceive substrate stiffness to sustain local intracellular calcium, actomyosin tension, and adhesion to promote cellular process growth and cell surface sequestration of ß-catenin. Piezo2 knockout reverses WNT/ß-catenin signaling states between Sox2+ tumor cells and endothelial cells, compromises the BTB, reduces the quiescence of Sox2+ tumor cells, and markedly enhances the MB response to chemotherapy. Our study reveals that mechanosensitive tumor cells construct the BTB to mask tumor chemosensitivity. Targeting Piezo2 addresses the BTB and tumor quiescence properties that underlie treatment failures in brain cancer.
Asunto(s)
Neoplasias Encefálicas , beta Catenina , Ratones , Animales , beta Catenina/metabolismo , beta Catenina/uso terapéutico , Células Endoteliales/metabolismo , Neoplasias Encefálicas/tratamiento farmacológico , Neoplasias Encefálicas/patología , Encéfalo/metabolismo , Canales Iónicos/metabolismo , Barrera Hematoencefálica/metabolismoRESUMEN
Heart beating is triggered by the generation and propagation of action potentials through the myocardium, resulting in the synchronous contraction of cardiomyocytes. This process highlights the importance of electrical and mechanical coordination in organ function. Investigating the pathogenesis of heart diseases and potential therapeutic actions in vitro requires biosensing technologies which allow for long-term and simultaneous measurement of the contractility and electrophysiology of cardiomyocytes. However, the adoption of current biosensing approaches for functional measurement of in vitro cardiac models is hampered by low sensitivity, difficulties in achieving multifunctional detection, and costly manufacturing processes. Leveraging carbon-based nanomaterials, we developed a biosensing platform that is capable of performing on-chip and simultaneous measurement of contractility and electrophysiology of human induced pluripotent stem-cell-derived cardiomyocyte (iPSC-CM) monolayers. This platform integrates with a flexible thin-film cantilever embedded with a carbon black (CB)-PDMS strain sensor for high-sensitivity contraction measurement and four pure carbon nanotube (CNT) electrodes for the detection of extracellular field potentials with low electrode impedance. Cardiac functional properties including contractile stress, beating rate, beating rhythm, and extracellular field potential were evaluated to quantify iPSC-CM responses to common cardiotropic agents. In addition, an in vitro model of drug-induced cardiac arrhythmia was established to further validate the platform for disease modeling and drug testing.
Asunto(s)
Células Madre Pluripotentes Inducidas , Miocitos Cardíacos , Humanos , Miocitos Cardíacos/fisiología , Células Madre Pluripotentes Inducidas/fisiología , Células Cultivadas , Contracción Miocárdica , Fenómenos Electrofisiológicos , Diferenciación CelularRESUMEN
In cell biology, fluorescent dyes are routinely used for biochemical measurements. The traditional global dye treatment method suffers from low signal-to-noise ratios (SNR), especially when used for detecting a low concentration of ions, and increasing the concentration of fluorescent dyes causes more severe cytotoxicity. Here, we report a robotic technique that controls how a low amount of fluorescent-dye-coated magnetic nanoparticles accurately forms a swarm and increases the fluorescent dye concentration in a local region inside a cell for intracellular measurement. Different from existing magnetic micromanipulation systems that generate large swarms (several microns and above) or that cannot move the generated swarm to an arbitrary position, our system is capable of generating a small swarm (e.g., 1 µm) and accurately positioning the swarm inside a single cell (position control accuracy: 0.76 µm). In experiments, the generated swarm inside the cell showed an SNR 10 times higher than the traditional global dye treatment method. The high-SNR robotic swarm enabled intracellular measurements that had not been possible to achieve with traditional global dye treatment. The robotic swarm technique revealed an apparent pH gradient in a migrating cell and was used to measure the intracellular apparent pH in a single oocyte of living C. elegans. With the position control capability, the swarm was also applied to measure calcium changes at the perinuclear region of a cell before and after mechanical stimulation. The results showed a significant calcium increase after mechanical stimulation, and the calcium increase was regulated by the mechanically sensitive ion channel, PIEZO1.
Asunto(s)
Colorantes Fluorescentes , Robótica , Animales , Relación Señal-Ruido , Calcio , Caenorhabditis elegansRESUMEN
From single-pole magnetic tweezers to robotic magnetic-field generation systems, the development of magnetic micromanipulation systems, using electromagnets or permanent magnets, has enabled a multitude of applications for cellular and intracellular measurement and stimulation. Controlled by different configurations of magnetic-field generation systems, magnetic particles have been actuated by an external magnetic field to exert forces/torques and perform mechanical measurements on the cell membrane, cytoplasm, cytoskeleton, nucleus, intracellular motors, etc. The particles have also been controlled to generate aggregations to trigger cell signaling pathways and produce heat to cause cancer cell apoptosis for hyperthermia treatment. Magnetic micromanipulation has become an important tool in the repertoire of toolsets for cell measurement and stimulation and will continue to be used widely for further explorations of cellular/intracellular structures and their functions. Existing review papers in the literature focus on fabrication and position control of magnetic particles/structures (often termed micronanorobots) and the synthesis and functionalization of magnetic particles. Differently, this paper reviews the principles and systems of magnetic micromanipulation specifically for cellular and intracellular measurement and stimulation. Discoveries enabled by magnetic measurement and stimulation of cellular and intracellular structures are also summarized. This paper ends with discussions on future opportunities and challenges of magnetic micromanipulation in the exploration of cellular biophysics, mechanotransduction, and disease therapeutics.
Asunto(s)
Mecanotransducción Celular , Micromanipulación , Campos Magnéticos , Magnetismo , ImanesRESUMEN
Octopuses can employ their tapered arms to catch prey of all shapes and sizes due to their dexterity, flexibility, and gripping power. Intrigued by variability in arm taper angle between different octopus species, we explored the utility of designing soft actuators exhibiting a distinctive conical geometry, compared with more traditional cylindrical forms. We find that these octopus-inspired conical-shaped actuators exhibit a wide range of bending curvatures that can be tuned by simply altering their taper angle and they also demonstrate greater flexibility compared with their cylindrical counterparts. The taper angle and bending curvature are inversely related, whereas taper angle and applied bending force are directly related. To further expand the functionality of our soft actuators, we incorporated vacuum-actuated suckers into the actuators for the production of a fully integrated octopus arm-inspired gripper. Notably, our results reveal that because of their enhanced flexibility, these tapered actuators with suckers have better gripping power than their cylindrical-shaped counterparts and require significantly larger forces to be detached from both flat and curved surfaces. Finally, we show that by choosing appropriate taper angles, our tapered actuators with suckers can grip, move, and place a remarkably wide range of objects with flat, nonplanar, smooth, or rough surfaces, as well as retrieve objects through narrow openings. The results from this study not only provide new design insights into the creation of next-generation soft actuators for gripping a wide range of morphologically diverse objects but also contribute to our understanding of the functional significance of arm taper angle variability across octopus species.
Asunto(s)
Octopodiformes , Robótica , Animales , Brazo , Diseño de Equipo , Fuerza de la Mano , Robótica/métodosRESUMEN
Collecting seafood animals (such as sea cucumbers, sea echini, scallops, etc.) cultivated in shallow water (water depth: ~30 m) is a profitable and an emerging field that requires robotics for replacing human divers. Soft robotics have several promising features (e.g., safe contact with the objects, lightweight, etc.) for performing such a task. In this paper, we implement a soft manipulator with an opposite-bending-and-extension structure. A simple and rapid inverse kinematics method is proposed to control the spatial location and trajectory of the underwater soft manipulator's end effector. We introduce the actuation hardware of the prototype, and then characterize the trajectory and workspace. We find that the prototype can well track fundamental trajectories such as a line and an arc. Finally, we construct a small underwater robot and demonstrate that the underwater soft manipulator successfully collects multiple irregular shaped seafood animals of different sizes and stiffness at the bottom of the natural oceanic environment (water depth: ~10 m).
RESUMEN
Remoras of the ray-finned fish family Echeneidae have the remarkable ability to attach to diverse marine animals using a highly modified dorsal fin that forms an adhesive disc, which enables hitchhiking on fast-swimming hosts despite high magnitudes of fluid shear. We present the design of a biologically analogous, multimaterial biomimetic remora disc based on detailed morphological and kinematic investigations of the slender sharksucker (Echeneis naucrates). We used multimaterial three-dimensional printing techniques to fabricate the main disc structure whose stiffness spans three orders of magnitude. To incorporate structures that mimic the functionality of the remora lamellae, we fabricated carbon fiber spinules (270 µm base diameter) using laser machining techniques and attached them to soft actuator-controlled lamellae. Our biomimetic prototype can attach to different surfaces and generate considerable pull-off force-up to 340 times the weight of the disc prototype. The rigid spinules and soft material overlaying the lamellae engage with the surface when rotated, just like the discs of live remoras. The biomimetic kinematics result in significantly enhanced frictional forces across the disc on substrates of different roughness. Using our prototype, we have designed an underwater robot capable of strong adhesion and hitchhiking on a variety of surfaces (including smooth, rough, and compliant surfaces, as well as shark skin). Our results demonstrate that there is promise for the development of high-performance bioinspired robotic systems that may be used in a number of applications based on an understanding of the adhesive mechanisms used by remoras.