RESUMEN
A cochleate formulation was developed to enhance the oral bioavailability of revaprazan (RVP). Dimyristoyl phosphatidylcholine (DMPC) liposome containing dicetyl phosphate (DCP) successfully formed a cochleate after treatment with CaCl2, whereas that containing sodium deoxycholate did not. Cochleate was optimised using a D-optimal mixture design with three independent variables-DMPC (X1, 70.58 mol%), cholesterol (X2, 22.54 mol%), and DCP (X3, 6.88 mol%)-and three response variables: encapsulation efficiency (Y1, 76.92%), released amount of free fatty acid at 2 h (Y2, 39.82%), and released amount of RVP at 6 h (Y3, 73.72%). The desirability function was 0.616, showing an excellent agreement between the predicted and experimental values. The cylindrical morphology of the optimised cochleate was visualised, and laurdan spectroscopy confirmed the dehydrated membrane interface, showing an increased generalised polarisation value (approximately 0.5) over small unilamellar vesicle of RVP (RVP-SUV; approximately 0.1). The optimised cochleate showed greater resistance to pancreatic enzyme than RVP-SUV. RVP was released in a controlled manner, achieving approximately 94% release in 12 h. Following oral administration in rats, the optimised cochleate improved the relative bioavailability of RVP by approximately 274%, 255%, and 172% compared to RVP suspension, a physical mixture of RVP and the cochleate, and RVP-SUV, respectively. Thus, the optimised cochleate formulation might be a good candidate for the practical development of RVP.
Asunto(s)
Dimiristoilfosfatidilcolina , Liposomas , Pirimidinonas , Tetrahidroisoquinolinas , Ratas , Animales , Disponibilidad Biológica , Administración Oral , Tamaño de la PartículaRESUMEN
OBJECTIVE: To develop an immediate-release tablet preparation containing rebamipide (RBM) and perform the bioavailability assessment in the healthy human subjects. MATERIALS AND METHODS: Raw RBM powder was characterized using differential scanning calorimetry, powder X-ray diffraction, and scanning electron microscopy (SEM). RBM tablets were manufactured by the wet granulation method, and their dissolution behavior was compared with the reference tablet (Mucosta). A phase I study (n = 47; sequence-randomized, open-label, single-dose, and two-way cross-over design) was designed for oral administration of a test formulation (F4) and Mucosta to healthy human male subjects, and pharmacokinetic parameters including the maximum plasma concentration (Cmax) and area under the curve from 0 to 12 hours (AUC0-12h) were compared. RESULTS: RBM powder had a multimodal size distribution with typical crystallinity, and the needle-like and elongated morphologies of RBM were visualized using SEM. Various tablet formulations (F1 - F6) were successfully manufactured using wet granulation method. F4 formulation was selected based on the dissolution profile most equivalent to that of Mucosta. F4 was stable for 6 months under accelerated and long-term storage conditions. Based on one-way analysis of variance, the AUC0-12h (F(1,92) = 2.40, p = 0.13) and tmax (F(1,92) = 0.04, p = 0.85) were not significantly different; however, the Cmax (F(1,92) = 5.45, p = 0.022) showed significant difference between F4 and reference tablets. CONCLUSION: Despite similar in vitro dissolution profiles, in vivo pharmacokinetic results revealed a partial difference between F4 and reference tablets. Thus, further study on formulation development is still needed.
Asunto(s)
Equivalencia Terapéutica , Humanos , Masculino , Polvos , Disponibilidad Biológica , Comprimidos , Voluntarios Sanos , Estudios Cruzados , Área Bajo la CurvaRESUMEN
To enhance the oral bioavailability of atorvastatin calcium (ATV), a novel solidified micelle (S-micelle) was developed. Two surfactants, Gelucire 48/16 (G48) and Tween 20 (T20), were employed for micelle formation, and two solid carriers (SC), Florite PS-10 (FLO) and Vivapur 105 (VP105), were selected as solid carriers. The S-micelle was optimized using a Box-Behnken design with three independent variables, including G48:T20 (X1, 1.8:1), SC:G48 + T20 (X2, 0.65:1), and FLO:VP105 (X3, 1.4:0.6), resulting in a droplet size (Y1) of 198.4 nm, dissolution efficiency at 15 min in the pH 1.2 medium (Y2) of 47.6%, Carr's index (Y3) of 16.9, and total quantity (Y4) of 562.5 mg. The optimized S-micelle resulted in good correlation showing percentage prediction values less than 10%. The optimized S-micelle formed a nanosized dispersion in the aqueous phase, with a higher dissolution rate than raw ATV and crushed Lipitor®. The optimized S-micelle improved the relative bioavailability of oral ATV (25 mg equivalent/kg) in rats by approximately 509 and 271% compared to raw ATV and crushed Lipitor®, respectively. In conclusion, the optimized S-micelle possesses great potential for the development of solidified formulations for improved oral absorption of poorly water-soluble drugs.
Asunto(s)
Sistemas de Liberación de Medicamentos , Micelas , Ratas , Animales , Atorvastatina , Sistemas de Liberación de Medicamentos/métodos , Disponibilidad Biológica , Proyectos de Investigación , Química Farmacéutica/métodos , Solubilidad , Emulsiones , Polisorbatos , Tamaño de la Partícula , Administración OralRESUMEN
A self-nanoemulsifying drug delivery system (SNEDDS) was developed to enhance the dissolution and oral bioavailability (BA) of revaprazan (RVP). Various SNEDDSs containing 200 mg of RVP were formulated using Capmul MCM, Tween 80, and Brij L4, and they were characterized according to their size, polydispersity index, and dissolution behavior. Dissolution rates of all SNEDDS formulations significantly (p < 0.05) improved with the formation of nanoemulsion with monodispersity. Formulation D resulted in RVP dissolution exceeding 70% at 2 h. Compared to raw RVP, SNEDDS exhibited a 4.8- to 7.4-fold improved effective permeability coefficient (Peff) throughout the intestine in the in situ single pass intestinal permeability study and a 5.1-fold increased oral BA in the in vivo oral absorption assessment in rats. To evaluate the degree of lymphatic uptake, cycloheximide (CYC), a chylomicron flowing blocker, was pretreated prior to the experiment. This pretreatment barely affected the absorption of raw RVP; however, it greatly influenced the absorption of SNEDDS, resulting in an approximately 40% reduction in both the Peff value and oral BA representing lymphatic transport. Thus, we suggest that the SNEDDS formulation is a good candidate for improving oral absorption of RVP through enhanced lymphatic uptake.
Asunto(s)
Nanopartículas , Administración Oral , Animales , Disponibilidad Biológica , Sistemas de Liberación de Medicamentos/métodos , Liberación de Fármacos , Emulsiones , Tamaño de la Partícula , Pirimidinonas , Ratas , Solubilidad , TetrahidroisoquinolinasRESUMEN
To enhance the dissolution and oral bioavailability of telmisartan (TMS), a poorly water-soluble anti-hypertensive drug, a supersaturable self-microemulsifying drug delivery system (SuSMEDDS) was developed. Amorphous alkalinized TMS (AAT) was formulated into a SMEDDS, composed of Capmul® MCM (oil), Cremophor® RH40 (surfactant), and tetraglycol (co-surfactant). Although the SMEDDS was rapidly dissolved (>80% within 5 min) in a limited condition (500 mL, pH 6.8), drug precipitation was observed over time, resulting in a decrease in dissolution levels. The precipitation was due to drug recrystallization, as determined by differential scanning calorimetry and powder X-ray diffraction analyses. Several polymers, including Soluplus® (SOL), were screened as precipitation inhibitors; ultimately, SuSMEDDS-SOL was prepared by admixing SOL and the SMEDDS at a 5:100 (w/w) ratio. SuSMEDDS-SOL was superior in terms of dissolution efficiency (>90% over 2 h) and dissolution-retaining time (no precipitation over 2 h). An in vivo pharmacokinetic study in rats revealed that the oral bioavailability of SuSMEDDS-SOL was 4.8-, 1.3-, and 1.2-fold greater than those of the TMS suspension, AAT solution, and SMEDDS, respectively. Therefore, SuSMEDDS-SOL is a promising candidate to enhance the dissolution and oral bioavailability of TMS.
Asunto(s)
Antihipertensivos/sangre , Antihipertensivos/síntesis química , Sistemas de Liberación de Medicamentos/métodos , Emulsionantes/sangre , Emulsionantes/síntesis química , Telmisartán/sangre , Telmisartán/síntesis química , Administración Oral , Animales , Antihipertensivos/administración & dosificación , Disponibilidad Biológica , Emulsionantes/administración & dosificación , Masculino , Ratas , Ratas Sprague-Dawley , Solubilidad , Telmisartán/administración & dosificaciónRESUMEN
Valsartan (VST) is a poorly water-soluble drug and a P-glycoprotein (P-gp) substrate. To enhance the dissolution and oral absorption of VST, a novel supersaturable self-microemulsifying drug delivery system (Su-SMEDDS) was formulated. Based on the previously reported Su-SMEDDS composed of Capmul® MCM (oil), Tween® 20 (T20; surfactant), Transcutol® P (cosurfactant), and Poloxamer 407 (supersaturating agent), P-gp inhibitory surfactants including Tween® 80 (T80) and Cremophor® EL (CR) were newly introduced to replace T20. All Su-SMEDDS formulations had a droplet size of <200 nm and showed rapid (>90% within 5 min) and pH-independent dissolution characteristics. The effective permeability coefficient (Peff) in rat jejunum was obtained using an in situ single-pass intestinal perfusion study: Peff values of Su-SMEDDS-T20, Su-SMEDDS-T80, and Su-SMEDDS-CR were 2.3, 4.1, and 3.4 times greater, respectively, than that of the VST solution. After oral administration of various formulations to rats (equivalent dose of VST 10 mg/kg), plasma drug levels were measured by liquid chromatography-tandem mass spectrometry. The relative bioavailabilities of Su-SMEDDS-T20, Su-SMEDDS-T80, and Su-SMEDDS-CR were 262%, 470%, and 458%, respectively, compared with the VST suspension. Thus, we propose that the Su-SMEDDS-T80 formulation is a good candidate for improving the oral absorption of poorly water-soluble and P-gp substrate drugs such as VST.
Asunto(s)
Miembro 1 de la Subfamilia B de Casetes de Unión a ATP/antagonistas & inhibidores , Valsartán/química , Administración Oral , Animales , Disponibilidad Biológica , Química Farmacéutica/métodos , Sistemas de Liberación de Medicamentos/métodos , Emulsiones/química , Masculino , Tamaño de la Partícula , Ratas , Ratas Sprague-Dawley , Solubilidad/efectos de los fármacos , Tensoactivos/química , Valsartán/farmacologíaRESUMEN
To overcome the poor dissolution of telmisartan (TMS) at weak acidic pH, amorphous alkalinized TMS (AAT) was prepared by introducing sodium hydroxide as a selective alkalizer. AAT-containing polymeric solid dispersions were prepared by a solvent evaporation method; these solid dispersions were AAT-PEG, AAT-PVP, AAT-POL, and AAT-SOL for the polymers of PEG 6000, PVP K30, Poloxamer 407, and Soluplus, respectively. The characteristics of the different formulations were observed by differential scanning calorimetry, powder X-ray diffraction, Fourier transform infrared spectroscopy, and scanning electron microscopy. To compare the supersaturation behavior, a dissolution test was performed at 37 ± 0.5 °C either in 900 ml (plain condition) or 500 ml (limited condition) of pH 6.8-simulated intestinal fluid used as a medium. AAT-SOL exhibited enhanced dissolution, indicating the probability of extended supersaturation in the limited condition. AAT-SOL was further formulated into a tablet by introducing other excipients, Vivapur 105 and Croscarmellose, as a binder and superdisintegrant, respectively, using a direct compression method. The selected AAT-SOL tablet was superior to Micardis (the reference product) in the aspect of supersaturation maintenance during dissolution in the limited condition, suggesting that it is a promising candidate for practical development that can replace the commercial product in the future.
Asunto(s)
Antiácidos/química , Composición de Medicamentos/métodos , Telmisartán/química , Antiácidos/metabolismo , Antihipertensivos/química , Antihipertensivos/metabolismo , Rastreo Diferencial de Calorimetría/métodos , Excipientes/química , Excipientes/metabolismo , Microscopía Electrónica de Rastreo/métodos , Polímeros/química , Polímeros/metabolismo , Solventes/química , Solventes/metabolismo , Espectroscopía Infrarroja por Transformada de Fourier/métodos , Comprimidos , Telmisartán/metabolismo , Difracción de Rayos X/métodosRESUMEN
To overcome the low oral bioavailability of insulin, we hypothesized that the insulin-hydrophobic ion pairing (HIP) complex incorporated self-microemulsifying drug delivery system (SMEDDS) would be beneficial. In the present study, an oral insulin delivery system was developed and estimated using the HIP technique and SMEDDS. Further insulin-HIP complexes were characterized using various spectroscopical techniques. Additionally, insulin-HIP complexes were subjected to analysis of complexes' conformational stability in the real physiological solution using computational approaches. On the other hand, in vitro, and in vivo studies were carried out to investigate the permeability and hypoglycemic effect. Subsequently, in an in vitro non-everted gut sac study, the apparent permeability coefficient (Papp) was approximately 8-fold higher in the colon than in the jejunum, and the HIP-incorporated SMEDDS showed an approximately 3-fold higher Papp value than the insulin solution. The hypoglycemic effect after in situ colon instillation, the HIP complex between insulin and sodium docusate-incorporated SMEDDS showed a pharmacological availability of 2.52 ± 0.33 % compared to the subcutaneously administered insulin solution. Thus, based on these outcomes, it can be concluded that the selection of appropriate counterions is important in developing HIP-incorporated SMEDDS, wherein this system shows promise as a tool for oral peptide delivery systems.
Asunto(s)
Diabetes Mellitus , Insulina , Ratas , Animales , Humanos , Ratas Sprague-Dawley , Emulsiones/química , Solubilidad , Sistemas de Liberación de Medicamentos/métodos , Administración Oral , Hipoglucemiantes/farmacología , Hipoglucemiantes/uso terapéutico , Disponibilidad BiológicaRESUMEN
Despite the superior clinical efficacy of the re-esterified triglyceride (rTG) form compared to the ethylester form, few studies have been conducted on improving the bioavailability of the rTG form of omega-3 oil. The aim of study was to evaluate the effect of self emulsifying formulation on the improvement of bioavailability of rTG form of omega-3 oil. To develop a re-esterified triglyceride (rTG) soft capsule, an rTG-loaded self-emulsifying delivery system (SEDS) was designed using coconut oil, polysorbate 80, and lecithin. Candidate formulations were designed from a phase-diagram study and optimal SEDS formulations containing 85% of high omega-3 (ω-3) oils were screened from the evaluation of droplet size distribution, measurement of oil floating area and emulsion turbidity. The selected, optimized rTG SEDS formulation was filled into a soft capsule (NOVASEDS) and applied to a sequence-randomized, double-blind, single-dose, and two-way crossover clinical study (n = 44), and the the bioavailability of NOVASEDS was compared with that of a 'raw' rTG capsule (rTG OMEGA3) as control. The droplet size (D50) formed from the candidate formulations was approximately 30-45 µm, and the optimal formulation showed a unimodal particle distribution with the smallest oil floating area and small changes in turbidity after 24 h. Cmax and AUC from 0 to 24 h for NOVASEDS, calculated from docosahexaenoic acid (DHA), eicosapentaenoic acid (EPA), and as the sum of DHA and EPA, were significantly higher (P < 0.05) than corresponding values for rTG OMEGA3. In conclusion, NOVASEDS formulated by SEDS technology enabled the manufacture of a high rTG payload soft capsule with improved bioavailability in human subjects.
RESUMEN
The simultaneous drug delivery efficiency of a co-loaded single-carrier system of docetaxel (DTX)- and tariquidar (TRQ)-loaded nanostructured lipid carrier (NLC) functionalized with PEG and RIPL peptide (PRN) (D^T-PRN) was compared with that of a physically mixed dual-carrier system of DTX-loaded PRN (D-PRN) and TRQ-loaded PRN (T-PRN) to overcome DTX mono-administration-induced multidrug resistance. NLC samples were prepared using the solvent emulsification evaporation technique and showed homogeneous spherical morphology, with nano-sized dispersion (<220 nm) and zeta potential values of -15 to -7 mV. DTX and/or TRQ was successfully encapsulated in NLC samples (>95% encapsulation efficiency and 73-78 µg/mg drug loading). In vitro cytotoxicity was concentration-dependent; D^T-PRN exhibited the highest MDR reversal efficiency, with the lowest combination index value, and increased the cytotoxicity and apoptosis in MCF7/ADR cells by inducing cell-cycle arrest in the G2/M phase. A competitive cellular uptake assay using fluorescent probes showed that, compared to the dual nanocarrier system, the single nanocarrier system exhibited better intracellular delivery efficiency of multiple probes to target cells. In the MCF7/ADR-xenografted mouse models, simultaneous DTX and TRQ delivery using D^T-PRN significantly suppressed tumor growth as compared to other treatments. A single co-loaded system for PRN-based co-delivery of DTX/TRQ (1:1, w/w) constitutes a promising therapeutic strategy for drug-resistant breast cancer cells.
RESUMEN
The lipophilicity of a peptide drug can be considerably increased by hydrophobic ion pairing with amphiphilic counterions for successful incorporation into lipid-based formulations. Herein, to enhance the oral absorption of insulin (INS), a self-microemulsifying drug delivery system (SMEDDS) formulation was developed. Prior to optimization, INS was complexed with sodium n-octadecyl sulfate (SOS) to increase the loading into the SMEDDS. The INS-SOS complex was characterized via scanning electron microscopy, Fourier transform infrared spectroscopy, differential scanning calorimetry, and its dissociation behavior. The SMEDDS was optimized using a D-optimal mixture design with three independent variables including Capmul MCM (X1, 9.31%), Labrasol (X2, 49.77%), and Tetraglycol (X3, 40.92%) and three response variables including droplet size (Y1, 115.2 nm), INS stability (Y2, 46.75%), and INS leakage (Y3, 17.67%). The desirability function was 0.766, indicating excellent agreement between the predicted and experimental values. The stability of INS-SOS against gastrointestinal enzymes was noticeably improved in the SMEDDS, and the majority of INS remained in oil droplets during release. Following oral administration in diabetic rats, the optimized SMEDDS resulted in pharmacological availabilities of 3.23% (50 IU/kg) and 2.13% (100 IU/kg). Thus, the optimized SMEDDS is a good candidate for the practical development of oral delivery of peptide drugs such as INS.
Asunto(s)
Diabetes Mellitus Experimental , Insulina , Administración Oral , Animales , Disponibilidad Biológica , Diabetes Mellitus Experimental/tratamiento farmacológico , Sistemas de Liberación de Medicamentos/métodos , Emulsiones/química , Ratas , SolubilidadRESUMEN
Intravesical instillation of a poloxamer 407 (PLX)-based hydrogel offers advantages such as thermo-sensitivity and sol-to-gel transition, but its utility is limited by urinary obstruction and insufficient bladder residence time. To overcome these obstacles, a floating PLX-hydrogel (FPH) was developed using sodium bicarbonate (BC) as a floating agent and hyaluronic acid (HA) as a gel strength modulator. The FPH composition was optimized using the Box-Behnken design with three independent variables: X1 [PLX concentration, 23.91%], X2 [BC concentration, 5.15%], and X3 [HA concentration, 3.49%]. The quadratic model was the best fit (desirability function, 0.623), resulting in response parameters of Y1 [floating time, 53.7 s], Y2 [gelation temperature gap, 20.3°C], and Y3 [duration time of gel, 396.7 min]. Rheological observations revealed the mechanical rigidity (storage modulus > loss modulus at elevated temperature) of the optimized FPH (phase transition temperature, 15.08°C). Gel erosion and drug release studies were performed using the gravimetric method; the remaining FPH fraction decreased exponentially with time, and gemcitabine release was biphasic and surface erosion-controlled. In vivo buoyancy was evaluated in rats using ultrasonography; these results were similar to those of the in vitro floating behavior. Thus, optimized FPH for intravesical instillation is a prospective option for bladder cancer treatment.
Asunto(s)
Hidrogeles , Poloxámero , Administración Intravesical , Animales , Liberación de Fármacos , Estudios Prospectivos , RatasRESUMEN
PURPOSE: To enhance the oral bioavailability of revaprazan (RVP), a novel solid, supersaturable micelle (SSuM) was developed. METHODS: Surfactants and solid carriers were screened based on a solubility and a flowability test, respectively. Supersaturating agents, including Poloxamer 407 (P407), were screened. The SSuM was optimized using a Box-Behnken design with three independent variables, including Gelucire 44/14:Brij L4 (G44/BL4; X1) and the amounts of Florite PS-10 (FLO; X2) and Vivapur 105 (VP105; X3), and three response variables, ie, dissolution efficiency at 30 min (Y1), dissolution enhancing capacity (Y2), and Carr's index (Y3). The solid state property was evaluated, and a dissolution test was conducted. RVP, Revanex®, solid micelle (P407-free from the composition of SSuM), and SSuM were orally administrated to rats (RVP 20 mg equivalent/kg) for in vivo pharmacokinetic study. RESULTS: G44 and BL4 showed great solubility, with a critical micelle concentration range of 119.2-333.0 µg/mL. P407 had an excellent supersaturating effect. FLO and VP105 were selected as solid carriers, with a critical solidifying ratio (g/mL) of 0.30 and 0.91, respectively. With optimized values of X1 (-0.41), X2 (0.31), and X3 (-0.78), RVP (200 mg)-containing SSuM consisting of G44 (253.8 mg), BL4 (106.2 mg), FLO (99.3 mg), VP105 (199.8 mg), and P407 (40 mg) was developed, resulting in Y1 (40.3%), Y2 (0.008), and Y3 (12.3%). RVP existed in an amorphous state in the optimized SSuM, and the SSuM formed a nanosized dispersion in the aqueous phase, with approximately 71.7% dissolution at 2 h. The optimized SSuM improved the relative bioavailability of RVP in rats by approximately 478%, 276%, and 161% compared to raw RVP, Revanex®, and solid micelle, respectively. CONCLUSION: The optimized SSuM has great potential for the development of solidified formulations of poorly water-soluble drugs with improved oral absorption.
Asunto(s)
Micelas , Pirimidinonas/farmacología , Tetrahidroisoquinolinas/farmacología , Administración Oral , Animales , Disponibilidad Biológica , Composición de Medicamentos , Masculino , Modelos Teóricos , Tamaño de la Partícula , Polietilenglicoles , Pirimidinonas/farmacocinética , Ratas Sprague-Dawley , Solubilidad , Soluciones , Tensoactivos/química , Tetrahidroisoquinolinas/farmacocinéticaRESUMEN
INTRODUCTION: Intravesical instillation is preferred over the systemic route of administration, as an efficient route of drug administration to treat bladder cancer. However, the periodic voiding of urine washes out the instilled drugs, eventually resulting in reduced drug exposure. Moreover, the presence of the bladder permeability barrier limits drug permeation into tumor tissues. It is therefore important to develop a novel delivery system that not only promotes prolonged retention of drugs in the bladder but also enables drugs to penetrate the barrier. AREAS COVERED: This review addresses the limitations of conventional therapeutic regimens and reports the use of polymeric hydrogels and nano/microcarriers for enhanced intravesical drug delivery in bladder cancer. Strategies to prolong residence time in the bladder and enhance cell penetration and target-cell specificity are discussed. EXPERT OPINION: Although promising results have been obtained in the field of intravesical drug delivery, numerous questions remain unanswered in terms of therapeutic efficacy. Specialized function covering extended drug exposure and/or enhanced drug uptake should be considered. Assessment protocols that adequately mimic the human bladder environment in vitro and in vivo experiments are needed to expedite formulation development.
Asunto(s)
Sistemas de Liberación de Medicamentos , Neoplasias de la Vejiga Urinaria/tratamiento farmacológico , Administración Intravesical , Animales , Humanos , Hidrogeles , Permeabilidad , Polímeros/químicaRESUMEN
Docetaxel (DTX) has poor solubility, low specificity, and severe side effects. For efficient targeting of DTX to hepsin-overexpressing SKOV3 ovarian cancer cells, PEGylated and RIPL peptide (IPLVVPLRRRRRRRRC)-conjugated nanostructured lipid carriers (PEG-RIPL-NLCs) were examined for in vitro and in vivo antitumor efficacy. DTX-loaded plain NLCs (DTX-pNLCs), RIPL-NLCs (DTX-RIPL-NLCs), and PEG-RIPL-NLCs (DTX-PEG-RIPL-NLCs) were prepared using a solvent emulsification-evaporation technique. DTX was successfully loaded with high encapsulation efficiency (>93%), and all NLCs showed homogeneous dispersion with zeta potentials varying from -17 to 15 mV. Drug release was biphasic: initial rapid release, then gradual release. In vitro cytotoxicity was time- and dose-dependent: DTX-RIPL-NLCs and DTX-PEG-RIPL-NLCs exhibited greater cytotoxicity, enhanced cell apoptosis owing to the cell cycle arrest in the G2/M phase, and increased activation of the mitochondria-related intrinsic apoptosis pathway compared to DTX-pNLCs. Pharmacokinetic experiments in male Sprague-Dawley rats revealed that DTX-PEG-RIPL-NLCs increased the mean residence time of DTX but reduced total body clearance and volume of distribution. In a SKOV3-bearing xenograft Balb/c athymic mouse model, DTX-PEG-RIPL-NLCs suppressed tumors, evidenced by tumor volume change and histopathological examination. Thus, we conclude that PEG-RIPL-NLCs have an advantage of high payload of poorly water-soluble drugs and are a good candidate for drug targeting to SKOV3-derived ovarian cancer.
Asunto(s)
Antineoplásicos/administración & dosificación , Péptidos de Penetración Celular/metabolismo , Docetaxel/administración & dosificación , Portadores de Fármacos , Lípidos/química , Nanopartículas , Neoplasias Ováricas/tratamiento farmacológico , Animales , Antineoplásicos/química , Antineoplásicos/farmacocinética , Apoptosis/efectos de los fármacos , Línea Celular Tumoral , Péptidos de Penetración Celular/química , Docetaxel/química , Docetaxel/farmacocinética , Composición de Medicamentos , Liberación de Fármacos , Femenino , Puntos de Control de la Fase G2 del Ciclo Celular/efectos de los fármacos , Humanos , Inyecciones Intravenosas , Masculino , Ratones Endogámicos BALB C , Ratones Desnudos , Neoplasias Ováricas/metabolismo , Neoplasias Ováricas/patología , Ratas Sprague-Dawley , Carga Tumoral/efectos de los fármacos , Ensayos Antitumor por Modelo de XenoinjertoRESUMEN
A novel solid self-dispersing micelle (S-SDM) was developed to enhance the oral bioavailability of valsartan (VST) and to reduce the total mass of solidified supersaturable self-microemulsifying drug delivery system (S-SuSMEDDS), composed of Capmul MCM, Tween 80 (T80), Gelucire 44/14 (G44), Poloxamer 407, Florite PS-10 (FLO), and low-substituted hydroxypropyl cellulose B1 (HPC). Excluding oil component from S-SuSMEDDS, S-SDM was optimized using a Box-Behnken design with three independent variables: X1 (T80/G44, 0.63), X2 (FLO/HPC, 0.41), and X3 (solid carrier, 177.6 mg); and three response factors: Y1 (droplet size, 191.9 nm), Y2 (dissolution efficiency at 15 min, 55.0%), and Y3 (angle of repose, 32.4°). The desirability function was 0.636, showing an excellent agreement between the predicted and experimental values. With approximately 75% weight of S-SuSMEDDS, no distinct crystallinity of VST was observed in S-SDM, resulting in critical micelle concentration value of 32 µg/mL. Optimized S-SDM showed an approximate 4-fold improved dissolution (pH 1.2, 500 mL) compared with raw VST. Following oral administration in rats, optimized S-SDM improved relative bioavailability by approximately 235%, 216%, and 127% versus raw VST, Diovan® (commercial reference), and S-SuSMEDDS, respectively. Thus, optimized S-SDM could be a selectable candidate for developing water-insoluble drugs in reduced quantity.
Asunto(s)
Antihipertensivos/sangre , Antihipertensivos/síntesis química , Diseño de Fármacos , Micelas , Valsartán/sangre , Valsartán/síntesis química , Administración Oral , Animales , Antihipertensivos/administración & dosificación , Disponibilidad Biológica , Química Farmacéutica/métodos , Masculino , Ratas , Ratas Sprague-Dawley , Solubilidad , Valsartán/administración & dosificaciónRESUMEN
PURPOSE: To develop an intravesical instillation system for the treatment of bladder cancer, rapamycin (Rap) was encapsulated into liposomes and then homogeneously dispersed throughout a poloxamer 407 (P407)-based hydrogel. METHODS: Rap-loaded conventional liposomes (R-CL) and folate-modified liposomes (R-FL) were prepared using a film hydration method and pre-loading technique, and characterized by particle size, drug entrapment efficiency, and drug loading. The cellular uptake behavior in folate receptor-expressing bladder cancer cells was observed by flow cytometry and confocal laser scanning microscopy using a fluorescent probe. In vitro cytotoxic effects were evaluated using MTT assay, colony forming assay, and Western blot. For in vivo intravesical instillation, Rap-loaded liposomes were dispersed in P407-gel, generating R-CL/P407 and R-FL/P407. Gel-forming capacities and drug release were evaluated. Using the MBT2/Luc orthotopic bladder cancer mouse model, in vivo antitumor efficacy was evaluated according to regions of interest (ROI) measurement. RESULTS: R-CL and R-FL were successfully prepared, at approximately <160 nm, 42% entrapment efficiency, and 57 µg/mg drug loading. FL cellular uptake was enhanced over 2-fold than that of CL; folate receptor-mediated endocytosis was confirmed using a competitive assay with folic acid pretreatment. In vitro cytotoxic effects increased dose-dependently. Rap-loaded liposomes inhibited mTOR signaling and induced autophagy in urothelial carcinoma cells. With gelation time of <30 seconds and gel duration of >12 hrs, both R-CL/P407 and R-FL/P407 preparations transformed into gel immediately after instillation into the mouse bladder. Drug release from the liposomal gel was erosion controlled. In orthotopic bladder cancer mouse model, statistically significant differences in ROI values were found between R-CL/P407 and R-FL/P407 groups at day 11 (P=0.0273) and day 14 (P=0.0088), indicating the highest tumor growth inhibition by R-FL/P407. CONCLUSION: Intravesical instillation of R-FL/P407 might represent a good candidate for bladder cancer treatment, owing to its enhanced retention and FR-targeting.
Asunto(s)
Ácido Fólico/química , Hidrogeles/química , Sirolimus/administración & dosificación , Sirolimus/farmacología , Temperatura , Administración Intravesical , Animales , Antineoplásicos/farmacología , Antineoplásicos/uso terapéutico , Autofagia/efectos de los fármacos , Línea Celular Tumoral , Proliferación Celular/efectos de los fármacos , Coloides , Modelos Animales de Enfermedad , Liberación de Fármacos , Femenino , Receptores de Folato Anclados a GPI/metabolismo , Humanos , Liposomas , Ratones , Tamaño de la Partícula , Sirolimus/uso terapéutico , Serina-Treonina Quinasas TOR/metabolismo , Neoplasias de la Vejiga Urinaria/tratamiento farmacológicoRESUMEN
To improve the dissolution and oral bioavailability of valsartan (VST), we previously formulated a supersaturable self-microemulsifying drug delivery system (SuSMED) composed of Capmul® MCM (oil), Tween® 80 (surfactant), Transcutol® P (cosurfactant), and Poloxamer 407 (precipitation inhibitor) but encountered a stability problem (Transcutol® P-induced weight loss in storage) after solidification. In the present study, replacing Transcutol® P with Gelucire® 44/14 resulted in a novel SuSMED formulation, wherein the total amount of surfactant/cosurfactant was less than that of the previous formulation. Solidified SuSMED (S-SuSMED) granules were prepared by blending VST-containing SuSMED with selective solid carriers, L-HPC and Florite® PS-10, wherein VST existed in an amorphous state. S-SuSMED tablets fabricated by direct compression with additional excipients were sufficiently stable in terms of drug content and impurity changes after 6 months of storage at accelerated conditions (40 ± 2 °C and 75 ± 5% relative humidity). Consequently, enhanced dissolution was obtained (pH 1.2, 2 h): 6-fold for S-SuSMED granules against raw VST; 2.3-fold for S-SuSMED tablets against Diovan® (reference tablet). S-SuSMED tablets increased oral bioavailability in rats (10 mg/kg VST dose): approximately 177â»198% versus raw VST and Diovan®. Therefore, VST-loaded S-SuSMED formulations might be good candidates for practical development in the pharmaceutical industry.
RESUMEN
Although bacillus Calmette-Guérin cell wall skeleton (BCG-CWS) might function as a potential substitute for live BCG, its use in the treatment of bladder cancer remains limited owing to issues such as insolubility and micrometer-size following exposure to an aqueous environment. Thus, to develop a novel nanoparticulate system for efficient BCG-CWS delivery, liposomal encapsulation was carried out using a modified emulsification-solvent evaporation method (targets: Size, <200 nm; encapsulation efficiency, ~60%). Further, the liposomal surface was functionalized with specific ligands, folic acid (FA), and Pep-1 peptide (Pep1), as targeting and cell-penetrating moieties, respectively. Functionalized liposomes greatly increased the intracellular uptake of BCG-CWS in the bladder cancer cell lines, 5637 and MBT2. The immunoactivity was verified through elevated cytokine production and a THP-1 migration assay. In vivo antitumor efficacy revealed that the BCG-CWS-loaded liposomes effectively inhibited tumor growth in mice bearing MBT2 tumors. Dual ligand-functionalized liposome was also superior to single ligand-functionalized liposomes. Immunohistochemistry supported the enhanced antitumor effect of BCG-CWS, with IL-6 production and CD4 infiltration. Thus, we conclude that FA- and Pep1-modified liposomes encapsulating BCG-CWS might be a good candidate for bladder cancer treatment with high target selectivity.
RESUMEN
To improve the dissolution behavior of telmisartan (TMS), a poorly water-soluble angiotensin II receptor blocker, TMS-phospholipid complex (TPC) was prepared by solvent evaporation method and characterized by differential scanning calorimetry and powder X-ray diffractometry. The crystalline structure of TMS was transited into an amorphous state by TPC formation. The equilibrium solubility of TPC (1.3-6.1 mg/mL) in various vehicles was about 100 times higher than that of TMS (0.009-0.058 mg/mL). TPC-loaded self-microemulsifying drug delivery system (SMEDDS) formulation was optimized using the D-optimal mixture design with the composition of 14% Capryol 90 (oil; X1), 59.9% tween 80 (surfactant; X2), and 26.1% tetraglycol (cosurfactant; X3) as independent variables, which resulted in a droplet size of 22.17 nm (Y1), TMS solubilization of 4.06 mg/mL (Y2), and 99.4% drug release in 15 min (Y3) as response factors. The desirability function value was 0.854, indicating the reliability and accuracy of optimization; in addition, good agreement was found between the model prediction and experimental values of Y1, Y2, and Y3. Dissolution of raw TMS was poor and pH-dependent, where it had extremely low dissolution (< 1% for 2 h) in water, pH 4, and pH 6.8 media; however, it showed fast and high dissolution (> 90% in 5 min) in pH 1.2 medium. In contrast, the dissolution of the optimized TPC-loaded SMEDDS was pH-independent and reached over 90% within 5 min in all the media tested. Thus, we suggested that phospholipid complex formation and SMEDDS formulation using the experimental design method might be a promising approach to enhance the dissolution of poorly soluble drugs.