Topochemical Fluorination of LaBaInO4 to LaBaInO3F2, Their Optical Characterization, and Photocatalytic Activities for Hydrogen Evolution.

We report on a nonoxidative topochemical route for the synthesis of a novel indate-based oxyfluoride, LaBaInO3F2, using a low-temperature reaction of Ruddlesden-Popper-type LaBaInO4 with polyvinylidene difluoride as a fluorinating agent. The reaction involves the replacement of oxide ions with fluoride ions as well as the insertion of fluoride ions into the interstitial sites. From the characterization via powder X-ray diffraction (PXRD) and Rietveld analysis as well as automated electron diffraction tomography (ADT), it is deduced that the fluorination results in a symmetry lowering from I4/mmm (139) to monoclinic C2/c (15) with an expansion perpendicular to the perovskite layers and a strong tilting of the octahedra in the ab plane. Disorder of the anions on the apical and interstitial sites seems to be favored. The most stable configuration for the anion ordering is estimated based on an evaluation of bond distances from the ADT measurements via bond valence sums (BVSs). The observed disordering of the anions in the oxyfluoride results in changes in the optical properties and thus shows that the topochemical anion modification can present a viable route to alter the optical properties. Partial densities of states (PDOSs) obtained from ab initio density functional theory (DFT) calculations reveal a bandgap modification upon fluoride-ion introduction which originates from the presence of the oxide anions on the interstitial sites. The photocatalytic performance of the oxide and oxyfluoride shows that both materials are photocatalytically active for hydrogen (H2) evolution.

Li5Sn, the Most Lithium-Rich Binary Stannide: A Combined Experimental and Computational Study.

From reaction of excess lithium with tin, we isolate well-crystallized Li5Sn and solve the crystal structure from single-crystal X-ray diffraction data. The orthorhombic structure (space group Cmcm) features the same coordination polyhedra around tin and lithium as previously predicted by electronic structure calculations for this composition, however differently arranged. An extensive ab initio analysis, including thermodynamic integration using Langevin dynamics in combination with a machine-learning potential (moment tensor potential), is conducted to understand the thermodynamic stability of this Cmcm Li5Sn structure observed in our experiments. Among the 108 Li5Sn structures systematically derived using the structure enumeration algorithm, including the experimental Cmcm structure and those obtained in previous ab initio studies, another new structure with the space group Immm is found to be energetically most stable at 0 K. This computationally discovered Immm structure is also found to be thermodynamically more stable than the Cmcm structure at finite temperatures, indicating that the Cmcm Li5Sn structure observed in our experiments is favored likely due to kinetic reasons rather than thermodynamics.

Structural, Magnetic and Catalytic Properties of a New Vacancy Ordered Perovskite Type Barium Cobaltate BaCoO2.67.

A new vacancy ordered, anion deficient perovskite modification with composition of BaCoO2.67 (Ba3 Co3 O8 □1 ) has been prepared via a two-step heating process. Combined Rietveld analysis of neutron and X-ray powder diffraction data shows a novel ordering of oxygen vacancies not known before for barium cobaltates. A combination of neutron powder diffraction, magnetic measurements, and density functional theory (DFT) studies confirms G-type antiferromagnetic ordering. From impedance measurements, the electronic conductivity of the order of 10-4  S cm-1 is determined. Remarkably, the bifunctional catalytic activity for oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) is found to be comparable to that of Ba0.5 Sr0.5 Co0.8 Fe0.2 O3-y , confirming that charge-ordered anion deficient non-cubic perovskites can be highly efficient catalysts.

Structural and Magnetic Properties of BaFeO2.667 Synthesized by Oxidizing BaFeO2.5 Obtained via Nebulized Spray Pyrolysis.

A vacancy-ordered perovskite-type compound Ba3Fe3O8 (BaFeO2.667) was prepared by oxidizing BaFeO2.5 (P21/c) with the latter compound obtained by a spray pyrolysis technique. The structure of Ba3Fe3O8 was found to be isotypic to Ba3Fe3O7F (P21/m) and can be written as Ba3Fe3+2Fe4+1O8. Mössbauer spectroscopy and ab initio calculations were used to confirm mixed iron oxidation states, showing allocation of the tetravalent iron species on the tetrahedral site, and octahedral as well as square pyramidal coordination for the trivalent species within a G-type antiferromagnetic ordering. The uptake and release of oxygen were investigated over a broad temperature range from room temperature to 1100 °C under pure oxygen and ambient atmosphere via a combination of DTA/TG and variable temperature diffraction measurements. The compound exhibited a strong lattice enthalpy driven reduction to monoclinic and cubic BaFeO2.5 at elevated temperatures.

Phonon Lifetimes throughout the Brillouin Zone at Elevated Temperatures from Experiment and Ab Initio.

We obtain phonon lifetimes in aluminium by inelastic neutron scattering experiments, by ab initio molecular dynamics, and by perturbation theory. At elevated temperatures significant discrepancies are found between experiment and perturbation theory, which disappear when using molecular dynamics due to the inclusion of full anharmonicity and the correct treatment of the multiphonon background. We show that multiple-site interactions are small and that local pairwise anharmonicity dominates phonon-phonon interactions, which permits an efficient computation of phonon lifetimes.

Anomalous Phonon Lifetime Shortening in Paramagnetic CrN Caused by Spin-Lattice Coupling: A Combined Spin and Ab Initio Molecular Dynamics Study.

We study the mutual coupling of spin fluctuations and lattice vibrations in paramagnetic CrN by combining atomistic spin dynamics and ab initio molecular dynamics. The two degrees of freedom are dynamically coupled, leading to nonadiabatic effects. Those effects suppress the phonon lifetimes at low temperature compared to an adiabatic approach. The dynamic coupling identified here provides an explanation for the experimentally observed unexpected temperature dependence of the thermal conductivity of magnetic semiconductors above the magnetic ordering temperature.

A Combined Experimental and First-Principles Based Assessment of Finite-Temperature Thermodynamic Properties of Intermetallic Al3Sc.

We present a first-principles assessment of the finite-temperature thermodynamic properties of the intermetallic Al3Sc phase including the complete spectrum of excitations and compare the theoretical findings with our dilatometric and calorimetric measurements. While significant electronic contributions to the heat capacity and thermal expansion are observed near the melting temperature, anharmonic contributions, and electron-phonon coupling effects are found to be relatively small. On the one hand, these accurate methods are used to demonstrate shortcomings of empirical predictions of phase stabilities such as the Neumann-Kopp rule. On the other hand, their combination with elasticity theory was found to provide an upper limit for the size of Al3Sc nanoprecipitates needed to maintain coherency with the host matrix. The chemo-mechanical coupling being responsible for the coherency loss of strengthening precipitates is revealed by a combination of state-of-the-art simulations and dedicated experiments. These findings can be exploited to fine-tune the microstructure of Al-Sc-based alloys to approach optimum mechanical properties.

A map for phase-change materials.

Phase-change materials are characterized by a unique property portfolio well suited for data storage applications. Here, a first treasure map for phase-change materials is presented on the basis of a fundamental understanding of the bonding characteristics. This map is spanned by two coordinates that can be calculated just from the composition, and represent the degree of ionicity and the tendency towards hybridization ('covalency') of the bonding. A small magnitude of both quantities is an inherent characteristic of phase-change materials. This coordinate scheme enables a prediction of trends for the physical properties on changing stoichiometry.

Determination of symmetry reduced structures using a soft phonon analysis for magnetic shape memory alloys (abstract only).

Ni(2)MnGa is a typical example of a Heusler alloy that undergoes a martensitic transformation. In the high temperature austenitic phase it has a cubic L2(1) structure, whereas below 200 K the symmetry is reduced by an orthorhombic distortion. Despite lattice deformations of more than 6% and large strains connected to this change, it is completely reversible. Therefore, Ni(2)MnGa serves as a shape memory compound. The fact that Ni(2)MnGa additionally orders ferromagnetically below 360 K makes the material particularly attractive for applications in actuators and sensors. Nevertheless, its structural details in the martensitic phase are still a subject of much debate. Several shuffling structures have been observed experimentally. The temperature and magnetic field dependent transformations between these structures need to be understood for improvement of the magnetic switching (e.g. operation with higher reliability and smaller magnetic fields). Our tool for identifying the stable structures and the low energy transition paths is the calculation of free energy surfaces as functions of key reaction coordinates (e.g. the ratio c/a) in density functional theory. (The generalized gradient approximation to the exchange-correlation functional and the projector augmented wave approach implemented in VASP (Vienna Ab initio Simulation Package) were used in these investigations.) The different variants of the low symmetry orthorhombic structures lead to characteristic minima on this surface. However, the ab initio determination of the experimentally observed shuffling structures is challenging, due to the large phase space of possible atomic positions and the small shuffling formation energies of only a few meV per unit cell. Hence, we used the quasiharmonic approximation in order to compute and analyze phonon spectra. Starting with the symmetric structure of the austenite, the TA(2) (TA standing for transverse acoustic) phonon dispersion shows a phonon softening along the [110] direction. We were able to extract detailed information about the type of this lattice instability from the eigenvectors of the unstable phonon modes. By setting up the corresponding modulated harmonics in supercell calculations, we systematically and efficiently identified stable shuffling structures. The resulting structural phases (austenite, martensite, pre-martensite) allow us to assign and to interpret the experimental observations.

Computationally-driven engineering of sublattice ordering in a hexagonal AlHfScTiZr high entropy alloy.

Multi-principle element alloys have enormous potential, but their exploration suffers from the tremendously large range of configurations. In the last decade such alloys have been designed with a focus on random solid solutions. Here we apply an experimentally verified, combined thermodynamic and first-principles design strategy to reverse the traditional approach and to generate a new type of hcp Al-Hf-Sc-Ti-Zr high entropy alloy with a hitherto unique structure. A phase diagram analysis narrows down the large compositional space to a well-defined set of candidates. First-principles calculations demonstrate the energetic preference of an ordered superstructure over the competing disordered solid solutions. The chief ingredient is the Al concentration, which can be tuned to achieve a D019 ordering on the hexagonal lattice. The computationally designed D019 superstructure is experimentally confirmed by transmission electron microscopy and X-ray studies. Our scheme enables the exploration of a new class of high entropy alloys.

The role of molybdenum in suppressing cold dwell fatigue in titanium alloys.

We test a hypothesis to explain why Ti-6242 is susceptible to cold dwell fatigue (CDF), whereas Ti-6246 is not. The hypothesis is that, in Ti-6246, substitutional Mo-atoms in α-Ti grains trap vacancies, thereby limiting creep relaxation. In Ti-6242, this creep relaxation enhances the loading of grains unfavourably oriented for slip and they subsequently fracture. Using density functional theory to calculate formation and binding energies between Mo-atoms and vacancies, we find no support for the hypothesis. In the light of this result, and experimental observations of the microstructures in these alloys, we agree with the recent suggestion (Qiu et al. 2014 Metall. Mater. Trans. A45, 6075-6087. (doi:10.1007/s11661-014-2541-5)) that Ti-6246 has a much smaller susceptibility to CDF because it has a smaller grain size and a more homogeneous distribution of grain orientations. We propose that the reduction of the susceptibility to CDF of Ti-6242 at temperatures above about 200°C is due to the activation of 〈c+a〉 slip in 'hard' grains, which reduces the loading of grain boundaries.

Deformation-Induced Martensite: A New Paradigm for Exceptional Steels.

Martensite steel is induced from pearlitic steel by a newly discovered method, which is completely different from the traditional route of quenching austenitic steel. Both experimental and theoretical studies demonstrate that Fe-C martensite forms by severe deformation at room temperature. The new mechanism identified here opens a paths to material-design strategies based on deformation-driven nanoscale phase transformations.