En Route to a Molecular Terminal Tin Oxide.

In the pursuit of terminal tin chalcogenides, heteroleptic stannylenes bearing terphenyl- and hexamethyldisilazide ligands were reacted with carbodiimides to yield the respective guanidinato complexes. Further supported by quantum chemical calculations, this revealed that the iso-propyl-substituted derivative provides the maximum steric protection achievable. Oxidation with elemental selenium produced monomeric terminal tin selenides with four-coordinate tin centers. In reactions with N2O as oxygen transfer reagent, silyl migration toward putative terminal tin oxide intermediates gave rise to tin complexes with terminal ─OSiMe3 functionality. To prevent silyl migration, the silyl groups were substituted with cyclohexyl moieties. This analogue exhibited distinctively different reactivities toward selenium and N2O, yielding a 1,2,3,4,5-tetraselenastannolane and chalcogenide-bridged dimeric compounds, respectively.

Coordination and Stabilization of a Lithium Ion with a Silylene.

Herein, we report the stabilization of lithium-ion as the source of lithium to use as a trans-metalation reagent [{PhC(Nt Bu)2 Si(t Bu)Li}2 I(t BuN)2 CPh] (1). The reaction of 3 equivalents of the LSit Bu (L=PhC(Nt Bu)2 ) and lithium iodide at low temperature leads to a silylene stabilized lithium-ion with an additional coordination of amidinate ligand. Compound 1 shows two four membered and one six membered ring as confirmed by QTAIM calculations. Whereas the reaction of the LSiCl with 1.5 equivalents of carbodiimide (CyN)2 C at room temperature affords compound [PhC(Nt Bu)2 Si(Cl)(NCy)2 NCy] (2) with the CN2 SiN2 C skeleton containing silicon as a central atom. Both the compounds were fully characterized by NMR, mass spectrometry, X-ray crystallographic analysis, and quantum mechanical calculations.

[2+4] Cycloaddition Product of an Amidinate Substituted Dialumene with Toluene.

Reduction of LAlI2 (L=PhC(Ni Pr2 C6 H3 )2 ) with two equivalents of KC8 in toluene affords the [2+4]cycloaddition product of a dialumene with toluene. The mechanism for the formation of product complex was investigated using density functional theory (DFT) methods.

Compounds with Alternating Single and Double Bonds of Antimony and Silicon; Isoelectronic to Ethane-1,2-diimine.

We present an approach for preparing chain-type unsaturated molecules with low oxidation state Si(I) and Sb(I) supported by amidinato ligands that exploit to generate heavy analogues of ethane 1,2-diimine. The reduction of antimony dihalide (R-SbCl2) with KC8 in the presence of silylene chloride afforded L─(Cl)Si═Sb─Tip (1) and L(Cl)Si═Sb─TerPh (2), respectively. Compounds 1 and 2 further undergo reduction with KC8 to produce Tip─Sb═LSi─LSi═Sb─Tip (3) and TerPh─Sb═LSi─LSi═Sb─TerPh (4). The solid-state structures and DFT studies show that all compounds have σ-type lone pairs at each Sb atom. It forms a strong pseudo-π-bond with Si. The pseudo-π-bond is formed by the hyperconjugative donation of the π-type lone pair at Sb to the Si-N σ* MO. The quantum mechanical studies indicate that compounds 3 and 4 has delocalized pseudo-π-MOs arising from hyperconjugative interactions. Hence, 1 and 2 can be considered as isoelectronic to imine, while 3 and 4 are isoelectronic to ethane-1,2-diimine. The proton affinity studies indicate that the pseudo-π-bond resulting from the hyperconjugative interaction is more reactive than the σ-type lone pair.

Cyclic (Alkyl)(Amino)Carbene-Stabilized Aluminum and Gallium Radicals Based on Amidinate Scaffolds.

Neutral, mononuclear aluminum and gallium radicals, stabilized by cyclic (alkyl)(amino)carbene (cAAC), were synthesized. LMCl2 upon reduction with KC8 in the presence of cAAC afforded the radicals LMCl(cAAC), where L = PhC(NtBu)2 and M = Al (1), Ga (2). The radicals were characterized by X-ray crystallography, electron paramagnetic resonance (EPR) spectroscopy, and mass spectrometry. EPR, SQUID measurement, and computational calculations confirmed paramagnetism of the radicals with unpaired spin mainly on cAAC.

HAlCl2 and H2AlCl as Precursors for the Preparation of Compounds with Four- and Five-Coordinate Aluminum.

Carbenes are known as donor molecules to form with chloroalane adducts, which enhances their aerobic and thermal stabilities. In contrast, the insertion products (cAACH)AlCl2(cAAC) (1) and (cAACH)AlHCl(THF) (2; THF = tetrahydrofuran) have been formed in the reaction of a cyclic alkyl(amino)carbene (cAAC:) with HAlCl2, and H2AlCl, respectively. PhC(NtBu)2Li as the precursor for the reaction with HAlCl2 in a molar ratio of 2:1 can easily form compound [PhC(NtBu)2]2AlH (3) with five-coordinate aluminum. The new products have been studied by spectroscopic methods and single-crystal X-ray diffraction.

Introducing NacNac-Like Bis(4,6-isopropylbenzoxazol-2-yl)methanide in s-Block Metal Coordination.

Within this work, the field of bulky methanides in metal coordination is exceeded by the synthesis of the versatile and promising bis(4,6-isopropylbenzoxazol-2-yl)methane (7) ligand platform. As an enhancement in this class of ligands, isopropyl (iPr) substituents as steric-demanding groups have been successfully introduced in proximity to the coordination pocket, mimicking the shielding abilities of the ubiquitous NacNac ligand scaffold to improve the steric protection of a coordinated s-block metal cation. A percent buried volume (% Vbur) calculation as well as an electronic structure analysis shades light onto the shielding and electronic abilities of the ligand in comparison to other selected methanides and diketiminates. Upon deprotonation with a variety of different group 1 and 2 metalation agents, a row of novel s-block metal complexes of the parent deprotonated monoanionic ligand 7 was obtained and structurally, as well as spectroscopically, characterized. In particular, in this context, the alkali-metal precursor complexes [Li(THF)2{(4,6-iPr-NCOC6H2)2CH}] (8) and [K{µ-(4,6-iPr-NCOC6H2)2CH}]∞ (9) as well as the alkaline-earth-metal compounds [MgCl(THF)2{(4,6-iPr-NCOC6H2)2CH}] (10) and [M(THF)n{(4,6-iPr-NCOC6H2)2CH}2] [M = Mg, n = 0 (11); M = Ca, n = 1 (12); M = Sr, n = 1 (13); M = Ba, n = 1 (14)] were successfully synthesized. Especially, the latter four exhibit interesting trends in the solid state as well as in solution within the metal series.

Reducing hybrid ligand-based alane and chasing aluminium(I): dialane and unusual transient dialumene.

In this work, an alane, [DNIAlH2] (1) (DNI = 3,3-dimethyl-2-[2-methyl-2-(2,6-diisopropyl-aniline)ethenyl]-3H-indolenine), stabilised by a hybrid ligand was reduced by Jones's Mg(I) ([(MesBDIMg)2]) and Roesky's Al(I) ([DippBDIAl:]). The resulting dialane compound [{DNI(H)Al}2] (2) was characterised using NMR spectroscopy, mass spectrometry, DFT calculations and single-crystal XRD experiments. The reaction of aluminium dihydride [DNIAlH2] (1) with [DippBDIAl:] at high temperatures gives an intramolecular C(sp2)-H bond-activated compound 3. To study the monomeric hybrid ligand-based Al(I), characterisations and computational calculations were performed, which elucidate that compound 5, consisting of two inequivalent aluminium atoms in an Al2CN four-membered ring, resulting from the activation of a carbon-nitrogen bond in the reaction of [DNINa] with [(Cp*Al)4].

Indium Kα radiation from a MetalJet X-ray source: comparison of the Eiger2 CdTe and Photon III detectors.

The MetalJet source makes available new Kα radiation wavelengths for use in X-ray diffraction experiments. The purpose of this paper is to demonstrate the application of indium Kα radiation in independent-atom model refinement, as well as approaches using aspherical atomic form factors. The results vary greatly depending on the detector employed, as the energy cut-off of the Eiger2 CdTe provides a solution to a unique energy contamination problem of the MetalJet In radiation, which the Photon III detector cannot provide.

Indium Kα radiation from a MetalJet X-ray source: the long way to a successful charge-density investigation.

The MetalJet X-ray source provides indium Kα radiation with a wavelength even shorter than Ag radiation. This paper reports on problematic spectral impurities and presents possible countermeasures so that collection of data with excellent quality up to a high resolution is possible. It is demonstrated that these data can be used in the refinement of a multipole model, the results of which are used for a topological analysis to assess the bonding situation in a sulfur ylide compound.

Tangible symmetry elements and space-group models to guide from molecular to solid-state composition.

The ability to imagine symmetry and the spatial arrangement of atoms and molecules is crucial in chemistry in general. Teaching and understanding crystallography and the composition of the solid state therefore require understanding of symmetry elements and their relationships. To foster the student's spatial imagination, models representing a range of concepts from individual rotation axes to complete space groups have been designed and built. These models are robust and large enough to be presented and operated in a lecture hall, and they enable students to translate conventional 2D notations into 3D objects and vice versa. Tackling them hands-on means understanding them.

Synthesis and computational aspects of Al(II)-Al(II) and Ga(II)-Ga(II) dihalides based on an amidinate scaffold.

Amidinate compounds with stabilized aluminium(II) and gallium(II) elements of composition L2M2X2 (3 and 4) have been prepared from their LMX2 (1 and 2) precursor, where M = Al (1 and 4) and Ga (2 and 3); L = PhC(NiPr2C6H3)2 (1 and 4) and PhC(NtBu)2 (2 and 3); and X is I (1 and 4) and Cl (2 and 3) and insights into their bonding are gained. The M-M bond lengths are reported along with the single-crystal X-ray structures of 1-4.

Fluorescent organo-antimony compounds as precursors for syntheses of redox-active trimeric and dimeric alkali metal antimonides: an insight into electron transfer reduction processes.

(Tip)2SbCl (1, Tip = 2,4,6-triisopropylphenyl) has been utilized as a precursor for the synthesis of the distibane (Tip)4Sb2 (4) via one-electron reduction using KC8. The two-electron reduction of 1 and 4 afforded the novel trinuclear antimonide cluster [K3((Tip)2Sb)3(THF)5] (6). Changing the reducing agent from KC8 to a different alkali metal resulted in the solid-state isolation of corresponding stable dimeric alkali metal antimonides with the general formula [M2((Tip)2Sb)2(THF)p-x(tol)x] (M = Li (14), Na (15), Cs (16)). In this report, different aspects of the various reducing agents [K metal, KC8, and [K2(Naph)2(THF)]] used have been studied, correlating the experimental observations with previous reports. Additional reactivity studies involving 1 and AgNTf2 (Tf = trifluoromethanesulfonyl) afforded the corresponding antimony cation (Tip)2Sb+NTf2- (19). The Lewis acidic character of 19 has been unambiguously proved via treatment with Lewis bases to produce the corresponding adducts 20 and 21. Interestingly, the precursors 1 and 4 have been observed to be highly luminescent, emitting green light under short-wavelength UV radiation. All the reported compounds have been characterized via NMR, UV-vis, mass spectrometry, and single-crystal X-ray diffraction analysis. Cyclic voltammetry (CV) studies of 1 in THF showed possible two electron reduction, suggesting the in situ generation of the corresponding radical-anion intermediate 1˙- and its subsequent conversion to the monomeric intermediate (Tip)2Sb- (5) upon further reduction. 5 undergoes oligomerization in the solid state to produce 6. The existence of 1˙- was proved using electron paramagnetic resonance (EPR) spectroscopy in solution. CV studies of 6 suggested its potential application as a reducing agent, which was further proved via the conversion of Tip-PCl2 to trimeric (Tip)3P3 (17), and cAACP-Cl (cAAC = cyclic alkyl(amino)carbene) to (cAAC)2P2 (18) and 4, utilizing 6 as a stoichiometric reducing agent.

Excellent yield of a variety of silicon-boron radicals and their reactivity.

Herein we report stable silicon-boron radicals of composition LSi(NMe2)-B(Br)Tip (1), LSi(NMe2)-B(I)Tip (2) LSi(tBu)-B(I)Tip (3) [L = PhC(NtBu)2]. They were prepared in high yield using a one pot reaction of LSiR, X2BTip and KC8 in a 1 : 1 : 1 molar ratio (R = tBu, NMe2; X = Br, I). The reaction of the silicon-boron radical with Br2 and Se affords the dihalogenated compound LSi(tBu)-B(Br2)Tip (4) and oxidative addition product LSi(tBu)Se (5). All the compounds were characterized by single-crystal X-ray structural analysis, electron paramagnetic resonance (EPR) analysis, elemental analysis, multinuclear NMR spectroscopy, and mass spectrometry. Quantum chemical calculations show that the B-centered radicals 1-3 are stabilised by hyperconjugative interactions.

Amidinate based indium(III) monohalides and ß-diketiminate stabilized In(II)-In(II) bond: synthesis, crystal structure, and computational study.

Synthesis and bonding aspects of mononuclear bis-amidinate indium(iii) monohalides L2InX (1-3), where L = PhC(NtBu)2; X is F (1), Br (2) or I (3) and ß-diketiminate (NacNac) stabilized In(ii) dimer (MesNacNac)2In2Br2 (4) with In-In bond are reported along with the single-crystal X-ray structures of 2-4.