Second Harmonic Generation microscopy reveals collagen fibres are more organised in the cervix of postmenopausal women.

BACKGROUND: During labour, the cervix undergoes a series of changes to allow the passage of the fetoplacental unit. While this visible transformation is well-described, the underlying and causative microscopic changes, in which collagen plays a major role, are poorly understood and difficult to visualise. Recent studies in mice and humans have shown that Second Harmonic Generation (SHG) microscopy, a non-destructive imaging technique, can detect changes in the cervical collagen. However, the question of whether SHG can identify changes in the arrangement of cervical collagen at different physiological stages still needs addressing. Therefore, this study aimed to compare the cervical collagen alignment between pre- and postmenopausal women using SHG and to generate proof-of-concept data prior to assessing this technique in pregnancy. METHODS: Cervical biopsies from premenopausal (n = 4) and postmenopausal (n = 4) multiparous women undergoing hysterectomy for benign conditions were cross-sectionally scanned using an upright confocal microscope. SHG images were collected in Z-stacks and qualitatively evaluated using semi-quantitative scoring (0-3 in ascending degree of alignment) by assessors who were unaware of the classification of the SHG images, and quantitatively, using 2D Fourier transformation analysis. The dominant orientation and difference in dispersion of collagen fibres in each z-stack (X ± SD) was calculated and compared between groups. RESULTS: Qualitatively, collagen fibres appeared more organised in postmenopausal women, [premenopausal: median 0, range (0-1), postmenopausal: median 1.25, range (1-3); X 2 (df = 5) = 19.35, p = 0.002]. Quantitatively, there was a statistically significant difference in collagen fibre dispersion between premenopausal (5.39° ± 12.68°) and postmenopausal women (-1.58° ± 8.24°), [Welch's t-test (245.54) = 5.54, p < 0.01], with no significant differences in dispersion within each group [premenopausal, Welch's F (7, 57.23) = 1.84, p = 0.098; postmenopausal, Welch's F (7, 57.28) = 1.39, p = 0.23]. CONCLUSION: These results suggest an increased alignment of cervical collagen in postmenopausal women which may result in increased stiffness and reduced compliance, confirm that SHG microscopy can provide qualitative and quantitative information about cervical collagen orientation without sample preparation, and support further research to explore SHG as a means of assessing cervical remodelling to predict the timing of term and preterm labour.

Pulsatile exposure to simulated reflux leads to changes in gene expression in a 3D model of oesophageal mucosa.

Oesophageal exposure to duodenogastroesophageal refluxate is implicated in the development of Barrett's metaplasia (BM), with increased risk of progression to oesophageal adenocarcinoma. The literature proposes that reflux exposure activates NF-κB, driving the aberrant expression of intestine-specific caudal-related homeobox (CDX) genes. However, early events in the pathogenesis of BM from normal epithelium are poorly understood. To investigate this, our study subjected a 3D model of the normal human oesophageal mucosa to repeated, pulsatile exposure to specific bile components and examined changes in gene expression. Initial 2D experiments with a range of bile salts observed that taurochenodeoxycholate (TCDC) impacted upon NF-κB activation without causing cell death. Informed by this, the 3D oesophageal model was repeatedly exposed to TCDC in the presence and absence of acid, and the epithelial cells underwent gene expression profiling. We identified ~300 differentially expressed genes following each treatment, with a large and significant overlap between treatments. Enrichment analysis (Broad GSEA, DAVID and Metacore™; GeneGo Inc) identified multiple gene sets related to cell signalling, inflammation, proliferation, differentiation and cell adhesion. Specifically NF-κB activation, Wnt signalling, cell adhesion and targets for the transcription factors PTF1A and HNF4α were highlighted. Our data suggest that HNF4α isoform switching may be an early event in Barrett's pathogenesis. CDX1/2 targets were, however, not enriched, suggesting that although CDX1/2 activation reportedly plays a role in BM development, it may not be an initial event. Our findings highlight new areas for investigation in the earliest stages of BM pathogenesis of oesophageal diseases and new potential therapeutic targets.

Dinuclear ruthenium(II) complexes as two-photon, time-resolved emission microscopy probes for cellular DNA.

The first transition-metal complex-based two-photon absorbing luminescence lifetime probes for cellular DNA are presented. This allows cell imaging of DNA free from endogenous fluorophores and potentially facilitates deep tissue imaging. In this initial study, ruthenium(II) luminophores are used as phosphorescent lifetime imaging microscopy (PLIM) probes for nuclear DNA in both live and fixed cells. The DNA-bound probes display characteristic emission lifetimes of more than 160 ns, while shorter-lived cytoplasmic emission is also observed. These timescales are orders of magnitude longer than conventional FLIM, leading to previously unattainable levels of sensitivity, and autofluorescence-free imaging.

The use of microphysiological systems to model metastatic cancer.

Cancer is one of the leading causes of death in the 21st century, with metastasis of cancer attributing to 90% of cancer-related deaths. Therefore, to improve patient outcomes there is a need for better preclinical models to increase the success of translating oncological therapies into the clinic. Current traditional staticin vitromodels lack a perfusable network which is critical to overcome the diffusional mass transfer limit to provide a mechanism for the exchange of essential nutrients and waste removal, and increase their physiological relevance. Furthermore, these models typically lack cellular heterogeneity and key components of the immune system and tumour microenvironment. This review explores rapidly developing strategies utilising perfusable microphysiological systems (MPS) for investigating cancer cell metastasis. In this review we initially outline the mechanisms of cancer metastasis, highlighting key steps and identifying the current gaps in our understanding of the metastatic cascade, exploring MPS focused on investigating the individual steps of the metastatic cascade before detailing the latest MPS which can investigate multiple components of the cascade. This review then focuses on the factors which can affect the performance of an MPS designed for cancer applications with a final discussion summarising the challenges and future directions for the use of MPS for cancer models.

Development of PCL PolyHIPE Substrates for 3D Breast Cancer Cell Culture.

Cancer is a becoming a huge social and economic burden on society, becoming one of the most significant barriers to life expectancy in the 21st century. In particular, breast cancer is one of the leading causes of death for women. One of the most significant difficulties to finding efficient therapies for specific cancers, such as breast cancer, is the efficiency and ease of drug development and testing. Tissue-engineered (TE) in vitro models are rapidly developing as an alternative to animal testing for pharmaceuticals. Additionally, porosity included within these structures overcomes the diffusional mass transfer limit whilst enabling cell infiltration and integration with surrounding tissue. Within this study, we investigated the use of high-molecular-weight polycaprolactone methacrylate (PCL-M) polymerised high-internal-phase emulsions (polyHIPEs) as a scaffold to support 3D breast cancer (MDA-MB-231) cell culture. We assessed the porosity, interconnectivity, and morphology of the polyHIPEs when varying mixing speed during formation of the emulsion, successfully demonstrating the tunability of these polyHIPEs. An ex ovo chick chorioallantoic membrane assay identified the scaffolds as bioinert, with biocompatible properties within a vascularised tissue. Furthermore, in vitro assessment of cell attachment and proliferation showed promising potential for the use of PCL polyHIPEs to support cell growth. Our results demonstrate that PCL polyHIPEs are a promising material to support cancer cell growth with tuneable porosity and interconnectivity for the fabrication of perfusable 3D cancer models.

Surfactant-free gelatin-stabilised biodegradable polymerised high internal phase emulsions with macroporous structures.

High internal phase emulsion (HIPE) templating is a well-established method for the generation of polymeric materials with high porosity (>74%) and degree of interconnectivity. The porosity and pore size can be altered by adjusting parameters during emulsification, which affects the properties of the resulting porous structure. However, there remain challenges for the fabrication of polyHIPEs, including typically small pore sizes (∼20-50 µm) and the use of surfactants, which can limit their use in biological applications. Here, we present the use of gelatin, a natural polymer, during the formation of polyHIPE structures, through the use of two biodegradable polymers, polycaprolactone-methacrylate (PCL-M) and polyglycerol sebacate-methacrylate (PGS-M). When gelatin is used as the internal phase, it is capable of stabilising emulsions without the need for an additional surfactant. Furthermore, by changing the concentration of gelatin within the internal phase, the pore size of the resulting polyHIPE can be tuned. 5% gelatin solution resulted in the largest mean pore size, increasing from 53 µm to 80 µm and 28 µm to 94 µm for PCL-M and PGS-M respectively. In addition, the inclusion of gelatin further increased the mechanical properties of the polyHIPEs and increased the period an emulsion could be stored before polymerisation. Our results demonstrate the potential to use gelatin for the fabrication of surfactant-free polyHIPEs with macroporous structures, with potential applications in tissue engineering, environmental and agricultural industries.

Gelatin-containing porous polycaprolactone PolyHIPEs as substrates for 3D breast cancer cell culture and vascular infiltration.

Tumour survival and growth are reliant on angiogenesis, the formation of new blood vessels, to facilitate nutrient and waste exchange and, importantly, provide a route for metastasis from a primary to a secondary site. Whilst current models can ensure the transport and exchange of nutrients and waste via diffusion over distances greater than 200 µm, many lack sufficient vasculature capable of recapitulating the tumour microenvironment and, thus, metastasis. In this study, we utilise gelatin-containing polymerised high internal phase emulsion (polyHIPE) templated polycaprolactone-methacrylate (PCL-M) scaffolds to fabricate a composite material to support the 3D culture of MDA-MB-231 breast cancer cells and vascular ingrowth. Firstly, we investigated the effect of gelatin within the scaffolds on the mechanical and chemical properties using compression testing and FTIR spectroscopy, respectively. Initial in vitro assessment of cell metabolic activity and vascular endothelial growth factor expression demonstrated that gelatin-containing PCL-M polyHIPEs are capable of supporting 3D breast cancer cell growth. We then utilised the chick chorioallantoic membrane (CAM) assay to assess the angiogenic potential of cell-seeded gelatin-containing PCL-M polyHIPEs, and vascular ingrowth within cell-seeded, surfactant and gelatin-containing scaffolds was investigated via histological staining. Overall, our study proposes a promising composite material to fabricate a substrate to support the 3D culture of cancer cells and vascular ingrowth.

Porous biomaterials for tissue engineering: a review.

The field of biomaterials has grown rapidly over the past decades. Within this field, porous biomaterials have played a remarkable role in: (i) enabling the manufacture of complex three-dimensional structures; (ii) recreating mechanical properties close to those of the host tissues; (iii) facilitating interconnected structures for the transport of macromolecules and cells; and (iv) behaving as biocompatible inserts, tailored to either interact or not with the host body. This review outlines a brief history of the development of biomaterials, before discussing current materials proposed for use as porous biomaterials and exploring the state-of-the-art in their manufacture. The wide clinical applications of these materials are extensively discussed, drawing on specific examples of how the porous features of such biomaterials impact their behaviours, as well as the advantages and challenges faced, for each class of the materials.

NF-κB is activated in oesophageal fibroblasts in response to a paracrine signal generated by acid-exposed primary oesophageal squamous cells.

Oesophageal exposure to duodenogastro-oesophageal refluxate leads to reflux oesophagitis and is implicated in the development of Barrett's metaplasia (BM). NF-κB signalling in epithelial cells is associated with the activation of transcription factors believed to be central to BM development, whilst NF-κB activation in fibroblasts plays a critical role in matrix remodelling. Our aim was to study the effects of acid exposure on NF-κB activation in primary human oesophageal fibroblasts (HOFs) and primary and immortalized oesophageal squames and to investigate any epithelial/stromal interactions in the response of these cells to acid. Primary HOFs and primary and immortalized oesophageal epithelial cells were exposed to acid (pH 7 - pH 4 ≤ 120 min) in single or pulsed treatments. Conditioned medium from epithelial cells following acid exposure was also applied to fibroblasts. Cell viability was determined by MTT-ESTA. NF-κB activation was determined by cellular localization of NF-κB/p65 visualized by immunofluorescence. Conditioned medium from oesophageal epithelial cells, subjected to pH 5 pulsatile exposure, activated NF-κB in fibroblasts, with some inter-patient variability, but these conditions did not directly activate NF-κB in the epithelial cells themselves. Significant NF-κB activation was seen in the epithelial cells but only with greater acidity and exposure times (pH 4, 60-120 min). Our findings show that acid exposure can cause indirect activation of stromal cells by epithelial-stromal interactions. This may contribute to the pathogenesis of oesophageal diseases, and the inter-patient variability may go some way to explain why some patients with reflux oesophagitis develop BM and others do not.

Electrospun Fiber Alignment Guides Osteogenesis and Matrix Organization Differentially in Two Different Osteogenic Cell Types.

Biomimetic replication of the structural anisotropy of musculoskeletal tissues is important to restore proper tissue mechanics and function. Physical cues from the local micro-environment, such as matrix fiber orientation, may influence the differentiation and extracellular matrix (ECM) organization of osteogenic progenitor cells. This study investigates how scaffold fiber orientation affects the behavior of mature and progenitor osteogenic cells, the influence on secreted mineralized-collagenous matrix organization, and the resulting construct mechanical properties. Gelatin-coated electrospun poly(caprolactone) fibrous scaffolds were fabricated with either a low or a high degree of anisotropy and cultured with mature osteoblasts (MLO-A5s) or osteogenic mesenchymal progenitor cells (hES-MPs). For MLO-A5 cells, alkaline phosphatase (ALP) activity was highest, and more calcium-containing matrix was deposited onto aligned scaffolds. In contrast, hES-MPs, osteogenic mesenchymal progenitor cells, exhibited higher ALP activity, collagen, and calcium deposition on randomly orientated fibers compared with aligned counterparts. Deposited matrix was isotropic on random fibrous scaffolds, whereas a greater degree of anisotropy was observed in aligned fibrous constructs, as confirmed by second harmonic generation (SHG) and scanning electron microscope (SEM) imaging. This resulted in anisotropic mechanical properties on aligned constructs. This study indicates that mineralized-matrix deposition by osteoblasts can be controlled by scaffold alignment but that the early stages of osteogenesis may not benefit from culture on orientated scaffolds.

In Vitro Low-Fluence Photodynamic Therapy Parameter Screening Using 3D Tumor Spheroids Shows that Fractionated Light Treatments Enhance Phototoxicity.

The evaluation of novel photosensitizers (PSs) for photodynamic therapy (PDT) is difficult due to the limitations of two-dimensional cell culture and multiple parameters (dose, light intensity, uptake time), which complicate progression to in vivo experiments and clinical translation. Three-dimensional (3D) cell culture models like multicellular cancer tumor spheroids (MCTS) show great similarities to in vivo avascular tumor conditions, improving the speed and accuracy of screening novel compounds with various treatment combinations. In this study, we utilize C8161 human melanoma spheroids to screen PDT treatment combinations using protoporphyrin IX (PpIX) and drug-loaded carbon dot (CD) conjugates PpIX-CD and PpIX@CD at ultralow fluence values (<10 J/cm2). Conjugates show equivalent light-induced damage to PpIX from 1 µg/mL with significantly less dark cytotoxicity up to 72 h after exposure, shown by LDH release and dsDNA content. Fractionated treatments, carried out by dividing light exposure with 24 h intervals, demonstrate an enhanced PDT effect compared to single exposure at equal concentrations. Light sheet fluorescence microscopy combined with live/dead staining demonstrates that spheroids sustain extensive damage after PDT, with PpIX and PpIX-CD showing improved uptake compared to PpIX@CD. We show that PDT parameter screening can be carried out using a low-cost and convenient combination of assays to improve the efficiency of evaluating novel compounds.

Two photon excitable graphene quantum dots for structured illumination microscopy and imaging applications: lysosome specificity and tissue-dependent imaging.

Biocompatible graphene quantum dots (GQDs), obtained from extracts of neem root, are found to be suitable for structured illumination microscopy and two-photon microscopy (TPM). Results of TPM and confocal luminescence microscopy ensure lysosome specificity in live cells and tissue-dependent localization in zebrafish, respectively, of GQDs.

A new anticancer glycolipid monoclonal antibody, SC104, which directly induces tumor cell apoptosis.

A novel monoclonal antibody was raised by immunization of mice with colorectal tumor cell lines. The fusion was screened by immunohistochemistry for binding to primary colorectal tumors. Subsequent analysis on primary disaggregated colorectal tumors show that the antibody recognizes a cell surface antigen expressed by the majority of colorectal tumors. Antigen characterization has shown that the antibody recognizes a sialyltetraosylceramide but does not bind to GM1, GD1a, GT1b, or sialyl Lewis(X) antigens. Binding to a frozen panel of tumor and normal tissue sections revealed that the antigen was also strongly expressed on esophageal, gastric, and endometrial tumors. Its normal tissue distribution was largely restricted to moderate staining of large intestine. Surprisingly, SC104 antibody directly induces tumor cell death without the need for immune effector cells or complement. This may be related in part to its homophilic binding properties that allow cross-linking of antibody and receptors on the cell surface. Caspase activation can be detected following SC104 treatment of colorectal cells, and cotreatment with caspase inhibitors has been shown to inhibit cell death. This suggests that SC104 induces death by a classic apoptotic pathway. Furthermore, SC104 antibody shows additive killing with complement and 5-fluorouracil/leucovorin in vivo, suggesting a new therapeutic approach for this class of antibodies.

Porous microspheres support mesenchymal progenitor cell ingrowth and stimulate angiogenesis.

Porous microspheres have the potential for use as injectable bone fillers to obviate the need for open surgery. Successful bone fillers must be able to support vascularisation since tissue engineering scaffolds often cease functioning soon after implantation due to a failure to vascularise rapidly. Here, we test the angiogenic potential of a tissue engineered bone filler based on a photocurable acrylate-based high internal phase emulsion (HIPE). Highly porous microspheres were fabricated via two processes, which were compared. One was taken forward and investigated for its ability to support human mesenchymal progenitor cells and angiogenesis in a chorioallantoic membrane (CAM) assay. Porous microspheres with either a narrow or broad size distribution were prepared via a T-junction microfluidic device or by a controlled stirred-tank reactor of the HIPE water in oil in water (w/o/w), respectively. Culture of human embryonic stem cell-derived mesenchymal progenitor (hES-MP) cells showed proliferation over 11 days and formation of cell-microsphere aggregates. In-vitro, hES-MP cells were found to migrate into microspheres through their surface pores over time. The presence of osteoblasts, differentiated from the hES-MP cells, was evidenced through the presence of collagen and calcium after 30 days. Microspheres pre-cultured with cells were implanted into CAM for 7 days and compared with control microspheres without pre-cultured cells. The hES-MP seeded microspheres supported greater angiogenesis, as measured by the number of blood vessels and bifurcations, while the empty scaffolds attracted host chick cell ingrowth. This investigation shows that controlled fabrication of porous microspheres has the potential to create an angiogenic, bone filling material for use as a cell delivery vehicle.

A new mode of contrast in biological second harmonic generation microscopy.

Enhanced image contrast in biological second harmonic imaging microscopy (SHIM) has previously been reported via quantitative assessments of forward- to epi-generated signal intensity ratio and by polarization analysis. Here we demonstrate a new form of contrast: the material-specific, wavelength-dependence of epi-generated second harmonic generation (SHG) excitation efficiency, and discriminate collagen and myosin by ratiometric epi-generated SHG images at 920 nm and 860 nm. Collagen shows increased SHG intensity at 920 nm, while little difference is detected between the two for myosin; allowing SHIM to characterize different SHG-generating components within a complex biological sample. We propose that momentum-space mapping of the second-order non-linear structure factor is the source of this contrast and develop a model for the forward and epi-generated SHG wavelength-dependence. Our model demonstrates that even very small changes in the assumed material fibrillar structure can produce large changes in the wavelength-dependency of epi-generated SHG. However, in the case of forward SHG, although the same changes impact upon absolute intensity at a given wavelength, they have very little effect on wavelength-dependency beyond the expected monotonic fall. We also propose that this difference between forward and epi-generated SHG provides an explanation for many of the wavelength-dependency discrepancies in the published literature.

Imaging cellular trafficking processes in real time using lysosome targeted up-conversion nanoparticles.

ß-NaYF4:Yb,Gd up-conversion nanoparticles, UCNPs, surface functionalized with suitable targetting peptides function as nontoxic lysosome-specific imaging probes.

Oxygen Mapping of Melanoma Spheroids using Small Molecule Platinum Probe and Phosphorescence Lifetime Imaging Microscopy.

Solid tumours display varied oxygen levels and this characteristic can be exploited to develop new diagnostic tools to determine and exploit these variations. Oxygen is an efficient quencher of emission of many phosphorescent compounds, thus oxygen concentration could in many cases be derived directly from relative emission intensity and lifetime. In this study, we extend our previous work on phosphorescent, low molecular weight platinum(II) complex as an oxygen sensing probe to study the variation in oxygen concentration in a viable multicellular 3D human tumour model. The data shows one of the first examples of non-invasive, real-time oxygen mapping across a melanoma tumour spheroid using one-photon phosphorescence lifetime imaging microscopy (PLIM) and a small molecule oxygen sensitive probe. These measurements were quantitative and enabled real time oxygen mapping with high spatial resolution. This combination presents as a valuable tool for optical detection of both physiological and pathological oxygen levels in a live tissue mass and we suggest has the potential for broader clinical application.

Developing Repair Materials for Stress Urinary Incontinence to Withstand Dynamic Distension.

BACKGROUND: Polypropylene mesh used as a mid-urethral sling is associated with severe clinical complications in a significant minority of patients. Current in vitro mechanical testing shows that polypropylene responds inadequately to mechanical distension and is also poor at supporting cell proliferation. AIMS AND OBJECTIVES: Our objective therefore is to produce materials with more appropriate mechanical properties for use as a sling material but which can also support cell integration. METHODS: Scaffolds of two polyurethanes (PU), poly-L-lactic acid (PLA) and co-polymers of the two were produced by electrospinning. Mechanical properties of materials were assessed and compared to polypropylene. The interaction of adipose derived stem cells (ADSC) with the scaffolds was also assessed. Uniaxial tensiometry of scaffolds was performed before and after seven days of cyclical distension. Cell penetration (using DAPI and a fluorescent red cell tracker dye), viability (AlamarBlue assay) and total collagen production (Sirius red assay) were measured for ADSC cultured on scaffolds. RESULTS: Polypropylene was stronger than polyurethanes and PLA. However, polypropylene mesh deformed plastically after 7 days of sustained cyclical distention, while polyurethanes maintained their elasticity. Scaffolds of PU containing PLA were weaker and stiffer than PU or polypropylene but were significantly better than PU scaffolds alone at supporting ADSC. CONCLUSIONS: Therefore, prolonged mechanical distension in vitro causes polypropylene to fail. Materials with more appropriate mechanical properties for use as sling materials can be produced using PU. Combining PLA with PU greatly improves interaction of cells with this material.

Emulsion templated scaffolds with tunable mechanical properties for bone tissue engineering.

Polymerised High Internal Phase Emulsions (PolyHIPEs) are manufactured via emulsion templating and exhibit a highly interconnected microporosity. These materials are commonly used as thin membranes for 3D cell culture. This study uses emulsion templating in combination with microstereolithography to fabricate PolyHIPE scaffolds with a tightly controlled and reproducible architecture. This combination of methods produces hierarchical structures, where the microstructural properties can be independently controlled from the scaffold macrostructure. PolyHIPEs were fabricated with varying ratios of two acrylate monomers (2-ethylhexyl acrylate (EHA) and isobornyl acrylate (IBOA)) and varying nominal porosity to tune mechanical properties. Young's modulus, ultimate tensile stress (UTS) and elongation at failure were determined for twenty EHA/IBOA compositions. Moduli ranged from 63.01±9.13 to 0.36±0.04MPa, UTS from 2.03±0.33 to 0.11±0.01MPa and failure strain from 21.86±2.87% to 2.60±0.61%. Selected compositions were fabricated into macro-porous woodpile structures, plasma treated with air or acrylic acid and seeded with human embryonic stem-cell derived mesenchymal progenitor cells (hES-MPs). Confocal and two-photon microscopy confirmed cell proliferation and penetration into the micro- and macro-porous architecture. The scaffolds supported osteogenic differentiation of mesenchymal cells and interestingly, the stiffest IBOA-based scaffolds that were plasma treated with acrylic acid promoted osteogenesis more strongly than the other scaffolds.

Raman spectroscopy detects melanoma and the tissue surrounding melanoma using tissue-engineered melanoma models.

Invasion of melanoma cells from the primary tumor involves interaction with adjacent tissues and extracellular matrix. The extent of this interaction is not fully understood. In this study Raman spectroscopy was applied to cryo-sections of established 3D models of melanoma in human skin. Principal component analysis was used to investigate differences between the tumor and normal tissue and between the peri-tumor area and the normal skin. Two human melanoma cells lines A375SM and C8161 were investigated and compared in 3D melanoma models. Changes were found in protein conformations and tryptophan configurations across the entire melanoma samples, in tyrosine orientation and in more fluid lipid packing only in tumor dense areas, and in increased glycogen content in the peri-tumor areas of melanoma. Raman spectroscopy revealed changes around the perimeter of a melanoma tumor as well as detecting differences between the tumor and the normal tissue.