Diphenylpyrrole-Strapped Calix[4]pyrrole Extractant for the Fluoride and Chloride Anions.

The anion binding features of diphenylpyrrole-strapped calix[4]pyrrole 1 have been investigated by means of 1 H NMR spectroscopy and ITC (isothermal titration calorimetry), as well as single crystal X-ray diffraction analyses. Receptor 1 bearing an auxiliary pyrrolic NH donor and solubilizing phenyl groups on the strap was found to bind F- , Cl- , and Br- as their tetrabutylammonium salts with high affinity in DMSO-d6 . In addition, receptor 1 was found to extract the fluoride anion (as both its tetraethylammonium (TEA+ ) and tetrabutylammonium (TBA+ ) salts), as well as the chloride anion into chloroform-d from an aqueous source phase. Cation metathesis using TBAI or the use of a dual host approach involving crown ethers enabled receptor 1 to extract simple alkali metal fluoride or chloride salts from water. Quantitative binding of NaF by receptor 1 was observed in 20 % D2 O-DMSO-d6 allowing for the direct determination of the NaF concentration in an unknown sample.

Syntheses and properties of graphyne fragments: trigonally expanded dehydrobenzo[12]annulenes.

We present herein the synthesis and properties of the largest hitherto unknown graphyne fragment, namely trigonally expanded tetrakis(dehydrobenzo[12]annulene)s (tetrakis-DBAs). Intramolecular three-fold alkyne metathesis reactions of hexakis(arylethynyl)DBAs 9 a and 9 b using Fürstner's Mo catalyst furnished tetrakis-DBAs 8 a and 8 b substituted with tert-butyl or branched alkyl ester groups in moderate and fair yields, respectively, demonstrating that the metathesis reaction of this protocol is a powerful tool for the construction of graphyne fragment backbones. For comparison, hexakis(arylethynyl)DBAs 9 c-g have also been prepared. The one-photon absorption spectrum of tetrakis-DBA 8 a bearing tert-butyl groups revealed a remarkable bathochromic shift of the absorption cut-off (λcutoff ) compared with those of previously reported graphyne fragments due to extended π-conjugation. Moreover, in the two-photon absorption spectrum, 8 a showed a large cross-section for a pure hydrocarbon because of the planar para-phenylene-ethynylene conjugation pathways. Hexakis(arylethynyl)-DBAs 9 c-e and 9 g and tetrakis-DBA 8 b bearing electron-withdrawing groups aggregated in chloroform solutions. Comparison between the free energies of 9 e and 8 b bearing the same substituents revealed the more favorable association of the latter due to stronger π-π interactions between the extended π-cores. Polarized optical microscopy observations, DSC, and XRD measurements showed that 8 b and 9 e with branched alkyl ester groups displayed columnar rectangular mesophases. By the time-resolved microwave conductivity method, the columnar rectangular phase of 8 b was shown to exhibit a moderate charge-carrier mobility of 0.12 cm(2) V(-1) s(-1) . These results indicate that large graphyne fragments can serve as good organic semiconductors.

Diffusion-controlled detection of trinitrotoluene: interior nanoporous structure and low highest occupied molecular orbital level of building blocks enhance selectivity and sensitivity.

Development of simple, cost-effective, and sensitive fluorescence-based sensors for explosives implies broad applications in homeland security, military operations, and environmental and industrial safety control. However, the reported fluorescence sensory materials (e.g., polymers) usually respond to a class of analytes (e.g., nitroaromatics), rather than a single specific target. Hence, the selective detection of trace amounts of trinitrotoluene (TNT) still remains a big challenge for fluorescence-based sensors. Here we report the selective detection of TNT vapor using the nanoporous fibers fabricated by self-assembly of carbazole-based macrocyclic molecules. The nanoporosity allows for time-dependent diffusion of TNT molecules inside the material, resulting in further fluorescence quenching of the material after removal from the TNT vapor source. Under the same testing conditions, other common nitroaromatic explosives and oxidizing reagents did not demonstrate this postexposure fluorescence quenching; rather, a recovery of fluorescence was observed. The postexposure fluorescence quenching as well as the sensitivity is further enhanced by lowering the highest occupied molecular orbital (HOMO) level of the nanofiber building blocks. This in turn reduces the affinity for oxygen, thus allocating more interaction sites for TNT. Our results present a simple and novel way to achieve detection selectivity for TNT by creating nanoporosity and tuning molecular electronic structure, which when combined may be applied to other fluorescence sensor materials for selective detection of vapor analytes.

Engineering solid-state morphologies in carbazole-ethynylene macrocycles.

We present a crystallographic study that systematically investigates the effects of the n-alkyl side-chain length on the crystal packing in shape-persistent macrocycles. The solid-state packing of carbazole-ethynylene-containing macrocycles is sensitive to the alkyl-chain length. In macrocycles containing n-alkyl side chains up to nine carbons in length, face-on aromatic π interactions predominate, while the addition of one carbon leads to a completely different packing arrangement. Macrocycles with C(10) or C(11) chains exhibit a novel packing motif wherein the alkyl chains intercalate between macrocycles, leading in one case to continuous solvent-filled channels. When crystals of the C(10) macrocycle are bathed in solvent, the included molecules exchange with the external solvent, and the alkyl chain disorder changes in response to changes in the guest volume in order to retain crystallinity. Powder X-ray diffraction data indicate that alkyl-macrocycle interactions in the longer chains "emulate" the distances typical of face-to-face π interactions, leading to deceptive indicators of π stacking.

N-Tosylpyrrolidine calix[4]pyrrole: synthesis and ion binding studies.

The synthesis and preliminary solution phase ion binding properties of the N-tosylpyrrolidine calix[4]pyrrole 2 are reported. This ß-octaalkyl-substituted calix[4]pyrrole, the first to be prepared via a direct condensation reaction, was obtained by reacting the 3,4-alkyl-functionalized pyrrole 8 with acetone in the presence of an acid catalyst. On the basis of (1)H NMR spectroscopic analyses and isothermal titration calorimetry, it was concluded that, compared with the parent, ß-unsubstituted calix[4]pyrrole (1), compound 2 possesses significantly enhanced binding ability for halide anions in chloroform. Furthermore, 2 proved capable of solubilizing in chloroform solution the otherwise insoluble salts, CsF and CsCl. These effects are ascribed to the interactions between the four tosyl groups present in 2 and the counter cations of the halide anion salts.

Octafluorocalix[4]pyrrole: a chloride/bicarbonate antiport agent.

meso-Octamethyloctafluorocalixpyrrole, a simple tetrapyrrolic macrocycle, has been shown to function as both a chloride/nitrate and a chloride/bicarbonate antiport agent for lipid bilayer transmembrane anion transport. This is the first example of a synthetic macrocyclic pyrrole-based receptor capable of transmembrane bicarbonate transport.

A calix[4]arene strapped calix[4]pyrrole: an ion-pair receptor displaying three different cesium cation recognition modes.

An ion-pair receptor, the calix[4]pyrrole-calix[4]arene pseudodimer 2, bearing a strong anion-recognition site but not a weak cation-recognition site, has been synthesized and characterized by standard spectroscopic means and via single-crystal X-ray diffraction analysis. In 10% CD(3)OD in CDCl(3) (v/v), this new receptor binds neither the Cs(+) cation nor the F(-) anion when exposed to these species in the presence of other counterions; however, it forms a stable 1:1 solvent-separated CsF complex when exposed to these two ions in concert with one another in this same solvent mixture. In contrast to what is seen in the case of a previously reported crown ether "strapped" calixarene-calixpyrrole ion-pair receptor 1 (J. Am. Chem. Soc. 2008, 130, 13162-13166), where Cs(+) cation recognition takes place within the crown, in 2.CsF cation recognition takes place within the receptor cavity itself, as inferred from both single-crystal X-ray diffraction analyses and (1)H NMR spectroscopic studies. This binding mode is supported by calculations carried out using the MMFF94 force field model. In 10% CD(3)OD in CDCl(3) (v/v), receptor 2 shows selectivity for CsF over the Cs(+) salts of Cl(-), Br(-), and NO(3)(-) but will bind these other cesium salts in the absence of fluoride, both in solution and in the solid state. In the case of CsCl, an unprecedented 2:2 complex is observed in the solid state that is characterized by two different ion-pair binding modes. One of these consists of a contact ion pair with the cesium cation and chloride anion both being bound within the central binding pocket and in direct contact with one another. The other mode involves a chloride anion bound to the pyrrole NH protons of a calixpyrrole subunit and a cesium cation sandwiched between two cone shaped calix[4]pyrroles originating from separate receptor units. In contrast to what is seen for CsF and CsCl, single-crystal X-ray structural analyses and (1)H NMR spectroscopic studies reveal that receptor 2 forms a 1:1 complex with CsNO(3), with the ions bound in the form of a contact ion pair. Thus, depending on the counteranion, receptor 2 is able to stabilize three different ion-pair binding modes with Cs(+), namely solvent-bridged, contact, and host-separated.

Bis-cation salt complexation by meso-octamethylcalix[4]pyrrole: linking complexes in solution and in the solid state.

Pyridinium and imidazolium bis-cations are shown to link calix[4]pyrrole anion complexes both in solution and in the solid state. This is accomplished by binding of the bis-cations to the electron-rich bowl shaped cavities formed by two separate calixpyrrole-anion complexes. These resulting sandwich-type structures provide a new way of organising calix[4]pyrrole anion complexes in space.

Bis-amidopyrrolyl Receptors Based on Anthracene and Carbazole.

A new set of diamide receptors containing anthracene and carbazole bridging subunits and either pyrrole or phenyl substituents were synthesized. The four systems produced in this way were shown to bind representative anions in DMSO-d(6) solution and in the solid state. A higher relative affinity for two test oxoanions, namely dihydrogen phosphate and benzoate, over chloride anion was seen in solution, with the anions in question being studied in the form of their respective tetrabutylammonium salts. However, the specifics of the anion recognition process were seen to depend on structure, with the pyrrole-containing systems displaying higher relative affinities than their corresponding phenyl-containing congeners, and the carbazole receptors proving more effective than the anthracene analogues. Such observations provide support for the notion that both the carbazole NH and the pyrrolic NH protons play an important role in stabilizing the receptor-bound anions in solution. Structural analyses of several anion complexes of the diamidopyrrole carbazole receptor reveal that this is not necessarily the case in the solid state; specifically, the pyrrole NH protons are seen to interact with the amide oxygen of another molecule. The net result is an extended a one-dimensional coordinaton polymer.

Anion binding behavior of heterocycle-strapped calix[4]pyrroles.

A comparative study of the halide and benzoate anion binding properties of a series of phenyl, pyrrole, and furan-strapped calix[4]pyrroles has been carried out. These receptors, which have previously been shown to bind the chloride anion (Yoon et al., Angew. Chem., Int. Ed. 47(27):5038-5042, 2008), were found to bind bromide and benzoate anion (studied as the corresponding tetrabutyl-ammonium salts) with near equal affinity in acetonitrile, albeit less well than chloride, as determined from ITC measurements or NMR spectroscopic titrations. This stands in marked contrast to the parent octamethylcalix[4]pyrrole, where the carboxylate anion affinities are substantially higher than those for bromide anion under identical conditions. This finding is rationalized in terms of tighter binding cavity present in the strapped systems. For all three anions for which quantitative data could be obtained (i.e., Cl(-), Br(-), PhCO(2) (-)), the pyrrole-strapped system displayed the highest affinity, although the relative enhancement was found to depend on the anion in question. In the specific case of fluoride anion binding to the pyrrole-strapped receptor, two modes of interaction are inferred, with the first consisting of binding to the calix[4]pyrrole via NH-anion hydrogen bonds, followed by a process that involves deprotonation of the strapped pyrrolic NH proton. A single crystal X-ray diffraction analysis provides support for the first of these modes and further reveals the presence of a methanol molecule bound to the fluoride anion.

Real-time determination of chloride anion concentration in aqueous-DMSO using a pyrrole-strapped calixpyrrole anion receptor.

The use of a pyrrole-strapped calix[4]pyrrole () permits the determination of chloride anion concentrations in mixed aqueous DMSO-d(6)-H(2)O environments via proton NMR spectroscopy.

Crown-6-calix[4]arene-capped calix[4]pyrrole: an ion-pair receptor for solvent-separated CsF ions.

An ion-pair receptor, 1, containing both cation- and anion-recognizing sites, has been synthesized and characterized. Single-crystal X-ray diffraction structural studies and (1)H NMR spectroscopic analyses confirmed that 1 forms stable 1:1 complexes with CsF in solution and in the solid state in spite of the large separation enforced between the receptor-bound anion and cation. In 9:1 CDCl3/CD3OD, binding of fluoride anion within the calix[4]pyrrole core of 1 was not observed in the absence of a cobound cesium cation; however, it was seen in this solvent mixture under conditions where a Cs(+) cation was bound to the crown ether-strapped calix[4]arene subunit.

Anion transfer at a micro-water/1,2-dichloroethane interface facilitated by beta-octafluoro-meso-octamethylcalix[4]pyrrole.

The facilitated transfer of four hydrophilic anions, i.e., Cl-, Br-, NO2-, and CH3CO2-, at the micro-water/1,2-dichloroethane interface supported at the tip of a micropipet has been observed successfully using beta-octafluoro-meso-octamethylcalix[4]pyrrole 2 as the receptor. We have also shown for the first time that the dynamics of this process can be studied by micropipet voltammetry. The standard kinetic rate constants (kdegrees) for facilitated anion transfer at such an interface were determined to be (2.11 +/- 0.90) x 10(-2) and (0.75 +/- 0.50) x 10(-2) cm/s in the case of Cl- and CH3CO2-, respectively. These values are much smaller than those associated with the facilitated transfer of analogous alkali metal ions. This difference is thought to reflect a number of underlying factors, including the higher hydration of anions as compared to similar sized cations. Studies such as these are expected to be useful in understanding the mechanism of anion transport at soft interfaces and for the design of yet-improved anion receptors and carriers.

Enhanced anion exchange for selective sulfate extraction: overcoming the Hofmeister bias.

In this communication, a new approach to enhancing the efficacy of liquid-liquid anion exchange is demonstrated. It involves the concurrent use of appropriately chosen hydrogen-bond-donating (HBD) anion receptors in combination with a traditional quaternary ammonium extractant. The fluorinated calixpyrroles 1 and 2 and the tetraamide macrocycle 4 were found to be particularly effective receptors. Specifically, their use allowed the extraction of sulfate by tricaprylmethylammonium nitrate to be effected in the presence of excess nitrate. As such, the present work provides a rare demonstration of overcoming the Hofmeister bias in a competitive environment and the first to the authors' knowledge wherein this difficult-to-achieve objective is attained using a neutral HBD-based anion binding agent under conditions of solvent extraction.

Photodoping and enhanced visible light absorption in single-walled carbon nanotubes functionalized with a wide band gap oligomer.

Carbon nanotubes feature excellent electronic properties but narrow absorption bands limit their utility in certain optoelectronic devices, including photovoltaic cells. Here, the addition of a wide-bandgap gap oligomer enhances light absorption in the visible spectrum. Furthermore, the oligomer interacts with the carbon nanotube through a peculiar charge transfer, which provides insight into Type II heterojunctions.

Oligomer-coated carbon nanotube chemiresistive sensors for selective detection of nitroaromatic explosives.

High-performance chemiresistive sensors were made using a porous thin film of single-walled carbon nanotubes (CNTs) coated with a carbazolylethynylene (Tg-Car) oligomer for trace vapor detection of nitroaromatic explosives. The sensors detect low concentrations of 4-nitrotoluene (NT), 2,4,6-trinitrotoluene (TNT), and 2,4-dinitrotoluene (DNT) vapors at ppb to ppt levels. The sensors also show high selectivity to NT from other common organic reagents at significantly higher vapor concentrations. Furthermore, by using Tg-Car/CNT sensors and uncoated CNT sensors in parallel, differential sensing of NT, TNT, and DNT vapors was achieved. This work provides a methodology to create selective CNT-based sensors and sensor arrays.

One-step surface doping of organic nanofibers to achieve high dark conductivity and chemiresistor sensing of amines.

High dark electrical conductivity was obtained for a p-type organic nanofibril material simply through a one-step surface doping. The nanofibril composite thus fabricated has been proven robust under ambient conditions. The high conductivity, combined with the intrinsic large surface area of the nanofibers, enables development of chemiresistor sensors for trace vapor detection of amines, with detection limit down to sub-parts per billion range.

Macrocyclic depolymerization of arylene-ethynylene copolymers: a dynamic combinatorial method.

A dynamic combinatorial approach for the synthesis of arylene ethynylene macrocycles (AEMs) from linear polymers is described. By using readily available carbazolyl-ethynylene copolymers as starting materials we obtained a number of novel macrocycles that would be difficult to prepare by traditional methods.

Temperature-Controlled, Reversible, Nanofiber Assembly from an Amphiphilic Macrocycle.

One-dimensional nanostructures are self-assembled from an amphiphilic arylene-ethynylene macrocycle (AEM) in solution phase. The morphology and size of the nanostructures are controlled by simply changing the temperature, reversibly switching between monomolecular cross-sectioned nanofibers and large bundles. At elevated temperature in aqueous solutions, the tri(ethylene glycol) (Tg) side chains of the AEM become effectively more hydrophobic, thus facilitating intermolecular association through side chain interactions. The enhanced intermolecular association causes the ultrathin nanofibers to be bundled, forming an opaque dispersion in solution. The reported observation provides a simple molecular design rule that may be applicable to other macrocycle molecules for use in temperature-controlled assembly regarding both size and morphology.