Residual thickness enhanced core-removed D-shaped single-mode fiber and its application for VOC evaporation monitoring.

A core-removed D-shaped structure with different residual thickness (RT) was manufactured on a single mode silica fiber (SMF) to enhance the sensitivity by using of ultra-precise polishing technology. With six different RTs ranging from ∼55 µm to ∼28 µm, the RT enhancement effect in a D-shaped SMF was researched in detail. The influence of the RT on its transmission spectra was investigated both theoretically and experimentally. Considering a compromise between the multimode interference efficiency and optical power loss, an optimum RT value of 34.09 µm was achieved. The obtained refractive index (RI) sensitivity was 10243 nm/RIU in the RI range of 1.430-1.444, corresponding to a RI resolution of 1.9×10-6 RIU. A high-performance all-fiber sensor was developed to monitor the evaporation process volatile organic compounds (VOCs) based on the RT-enhanced D-shaped SMF. As proof of concept, a 2-hour continuous monitoring was carried to monitor the chloroform and alcohol mixture. As a result, the evaporation of alcohol and chloroform were clearly identified and monitored. The developed RT-enhanced D-shaped fiber sensor provides an alternative way for chemical process monitoring and industrial applications.

Improved effects of Helicoverpa armigera nucleopolyhedrovirus integrated with Campoletis chlorideae against H. armigera and impact of the virus on the parasitoid.

BACKGROUND: Combined use can be an effective measure to improve pest control by viruses and parasitic wasps. However, not all combinations of natural enemies show improved effects. Helicoverpa armigera nucleopolyhedrovirus (HearNPV) and Campoletis chlorideae Uchida are two important natural enemies of Helicoverpa armigera. This study aimed to investigate the combined effects of C. chlorideae and HearNPV against H. armigera larvae and the impact of HearNPV on C. chlorideae. RESULTS: The combination of HearNPV and C. chlorideae exerted increased mortality on H. armigera when C. chlorideae parasitized larvae one day after infection with HearNPV. C. chlorideae could distinguish between HearNPV-infected and noninfected larvae. Besides influencing host selection of C. chlorideae, HearNPV infection had negative effects on the development and reproduction of C. chlorideae. The developmental time of C. chlorideae was significantly prolonged and the percentage of emergence and adult eclosion of C. chlorideae was lower in infected hosts. The adult wasps were also smaller in body size, and female adults had fewer eggs when they developed in virus-infected hosts. CONCLUSIONS: HearNPV combined with C. chlorideae could improve the efficacy of biological control against H. armigera. The results provided valuable information on the importance of timing in the combined use of HearNPV and C. chlorideae for the biological control of H. armigera. © 2023 Society of Chemical Industry.

Rearing Host Dependency of Ovariole Number and Body Size in Campoletis chlorideae Uchida (Hymenoptera: Ichneumonidae).

Campoletis chlorideae has great biocontrol potential against some major noctuid pests. In order to achieve the commercial development and utilization of C. chlorideae, this study focused on the effect of rearing host species and larval instars on the ovariole number and body size of this wasp. Firstly, the morphology of the reproductive system and ovarioles of female wasps were observed. The number of ovarioles displayed great variability and asymmetry between bilateral ovaries. Moreover, the effect of four host species on ovariole number and body size of C. chlorideae were studied. The wasps had a larger ovariole number and body size when reared in Helicoverpa armigera. Additionally, the ovariole number and body size were larger when reared in the third instar larvae than in the first or second instar larvae of H. armigera. There was a strong positive correlation between the ovariole number and body size of C. chlorideae. The ovariole number and body size of the wasp could be improved under optimized artificial rearing conditions. According to these results, body size combined with ovariole number can be used as an important index to evaluate the quality of C. chlorideae. This study provides important clues for the development and application of biocontrol using C. chlorideae.

Quartz-enhanced photoacoustic spectroscopy employing pilot line manufactured custom tuning forks.

Pilot line manufactured custom quartz tuning forks (QTFs) with a resonance frequency of 28 kHz and a Q value of >30, 000 in a vacuum and ∼ 7500 in the air, were designed and produced for trace gas sensing based on quartz enhanced photoacoustic spectroscopy (QEPAS). The pilot line was able to produce hundreds of low-frequency custom QTFs with small frequency shift < 10 ppm, benefiting the detecting of molecules with slow vibrational-translational (V-T) relaxation rates. An Au film with a thickness of 600 nm were deposited on both sides of QTF to enhance the piezoelectric charge collection efficiency and reduce the environmental electromagnetic noise. The laser focus position and modulation depth were optimized. With an integration time of 84 s, a normalized noise equivalent absorption (NNEA) coefficient of 1.7 × 10-8 cm-1∙W∙Hz-1/2 was achieved which is ∼10 times higher than a commercially available QTF with a resonance frequency of 32 kHz.