Synthesis and Characterization of a Sustained Nitric Oxide-Releasing Orthodontic Elastomeric Chain for Antimicrobial Action.

The acidic byproducts of bacteria in plaque around orthodontic brackets contribute to white spot lesion (WSL) formation. Nitric oxide (NO) has antibacterial properties, hindering biofilm formation and inhibiting the growth of oral microbes. Materials that mimic NO release could prevent oral bacteria-related pathologies. This study aims to integrate S-nitroso-acetylpenicillamine (SNAP), a promising NO donor, into orthodontic elastomeric ligatures, apply an additional polymer coating, and evaluate the NO-release kinetics and antimicrobial activity against Streptococus mutans. SNAP was added to clear elastomeric chains (8 loops, 23 mm long) at three concentrations (50, 75, 100 mg/mL, and a control). Chains were then coated, via electrospinning, with additional polymer (Elastollan®) to aid in extending the NO release. NO flux was measured daily for 30 days. Samples with 75 mg/mL SNAP + Elastollan® were tested against S. mutans for inhibition of biofilm formation on and around the chain. SNAP was successfully integrated into ligatures at each concentration. Only the 75 mg/mL SNAP chains maintained their elasticity. After polymer coating, samples exhibited a significant burst of NO on the first day, exceeding the machine's reading capacity, which gradually decreased over 29 days. Ligatures also inhibited S. mutans growth and biofilm formation. Future research will assess their mechanical properties and cytotoxicity. This study presents a novel strategy to address white spot lesion (WSL) formation and bacterial-related pathologies by utilizing nitric oxide-releasing materials. Manufactured chains with antimicrobial properties provide a promising solution for orthodontic challenges, showing significant potential for academic-industrial collaboration and commercial viability.

A rodent model using skeletal anchorage and low forces for orthodontic tooth movement.

INTRODUCTION: Nonhuman animal models have been used extensively to study orthodontic tooth movement (OTM). However, rodent models have disadvantages, including a reported reduction in bone volume during OTM. The purpose of this study was to determine the viability of a skeletal anchorage and the effect of low force (∼3 cN) on interradicular bone volume during OTM. METHODS: Ninety Sprague-Dawley rats were divided into 5 time points. A miniscrew and a nickel titanium coil spring placed a load of 3 cN (experimental) or 0 cN (sham) on the maxillary first molar in a split-mouth design. Displacement of the first molar and bone volume/total volume (BV/TV) in the interradicular region were quantified. RESULTS: The success rate of the miniscrew was 98.9% (89 out of 90). Linear and angular tooth movement increased steadily (mean 0.1 mm/wk, 0.48 mm at 40 days). BV/TV was significantly reduced between the tooth movement and non-tooth movement sides in the 3 cN group: by 13%, 23%, 15%, 23%, and 16% at 3, 7, 14, 28, and 40 days, respectively. CONCLUSIONS: Our model resulted in efficient OTM without skeletal anchorage failure. BV/TV reduction was lower than in previous reports. This novel validated model is likely to be the basis for future studies.

Bone biology-related gingival transcriptome in ageing and periodontitis in non-human primates.

AIM: Cellular and molecular immunoinflammatory changes in gingival tissues drive alveolar bone loss in periodontitis. Since ageing is a risk factor for periodontitis, we sought to identify age-related gingival transcriptome changes associated with bone metabolism in both healthy and in naturally occurring periodontitis. MATERIALS AND METHODS: Adult (12-16 years) and aged (18-23 years) non-human primates (M. mulatta) (n = 24) were grouped into healthy and periodontitis. Gingival tissue samples were obtained and subjected to microarray analysis using the Gene Chip Macaque Genome Array. Gene expression profiles involved in osteoclast/osteoblast proliferation, adhesion and function were evaluated and compared across and between the age groups. QPCR was also performed on selected genes to validate microarray data. RESULTS: Healthy aged tissues showed a gene profile expression that suggest enhancement of osteoclastic adhesion, proliferation/survival and function (SPP1, TLR4, MMP8 and TFEC) and impaired osteoblastic activity (SMEK3P and SMAD5). The gingival transcriptome in both adult and aged animals with naturally occurring periodontitis (FOS, IL6, TLR4, MMP9, MMP10 and SPP1 genes) was consistent with a local inflammatory response driving towards bone/connective tissue destruction. CONCLUSION: A pro-osteoclastogenic gingival transcriptome is associated with periodontitis irrespective of age; however; a greater bone-destructive molecular environment is associated with ageing in healthy tissues.

Variability associated with maxillary infrazygomatic crest and palatal bone width, height, and angulation in subjects with different vertical facial growth types: a retrospective cone-beam computed tomography study.

OBJECTIVES: To assess the infrazygomatic crest (IZC) and palatal bone width, height, and angulation in patients with different vertical facial growth types as potential miniscrew insertion sites. MATERIALS AND METHODS: In this retrospective cone-beam computed tomography study, 162 subjects (81 males and 81 females, mean age 16.05 ± 0.65 years) were included. They were divided into three groups (hypodivergent, normodivergent, and hyperdivergent) based on the Frankfort mandibular plane angle. Ten buccal bone measurements were made at two different coronal sections: maxillary first molar mesiobuccal and distobuccal roots (bilaterally). Six palatal bone measurements were made on a sagittal section at the maxillary central incisors (bilaterally). A total of 32 measurements per subject were considered in the study. RESULTS: No significant difference was observed for the IZC (width and angle) at the maxillary first molar mesiobuccal root. A comparison of normodivergent and hyperdivergent groups for buccal width at the distobuccal root of the first molar showed significant differences. Palatal bone thickness at the level of 2 mm distal to the apex of the central incisor was significantly higher for the hyperdivergent group (10.43 mm) compared with the normodivergent (7.58 mm) and hypodivergent groups (7.83 mm). CONCLUSIONS: Hyperdivergent subjects tend to present a longer and deeper IZC and increased palatal bone thickness compared with other groups. The recommended insertion angle for the IZC mini-implant at 3 mm from the alveolar crest should be between 75.5° and 77°.

Management of Anterior Open Bite and Skeletal Class II Hyperdivergent Patient with Clear Aligner Therapy.

In orthodontics, patients with hyperdivergent facial types or problems in the vertical dimension are often challenging to treat with predictable treatment results. Conventionally along with fixed appliances, a headgear, posterior bite block, extraction, temporary anchorage devices, or orthognathic surgery are preferable approaches to treat such patients. This case report illustrates a non-extraction, non-surgical orthodontic treatment of 5 mm anterior open bite in a non-growing adult patient, utilizing clear aligner therapy.

Racial and gender differences of cervical vertebral maturation staging between African Americans versus Caucasian patients of various age groups: A retrospective study.

BACKGROUND AND OBJECTIVE: The primary purpose of this study was to compare CVM staging between African American (AA) and Caucasian (CC) subjects, grouped based on gender. The secondary objectives were to conduct a CVM comparison of (1) male vs. female subjects, grouped based on their race, and (2) AA vs. CC subjects, categorized based on their age group. MATERIALS AND METHODS: All patients between 8-18 years of age (University of XXX), meeting the criteria, were included between the period of the year 2007 to 2020. Three blinded independent evaluators analysed the lateral cephalograms for a 6-stage CVM system (CS1 to CS6) as described by McNamara and Franchi. Samples were divided based on race, gender, and age to conduct the statistical analysis for racial and gender comparisons. RESULTS: Out of the initial 1,300 lateral cephalograms, 1,276 with the mean age: 12.7 years SD 2.5 years, and median CVM: 4 (IQR: 25% percentile- 2 and 75% percentile- 4) were included. Gender-specific racial age comparison showed no significant differences for male subjects for most of the CVM stages (P>0.05). Overall and race-specific gender comparison of age showed significant differences for almost all CVM stages (P<0.05). No significant difference of CVM was found on racial comparison for overall, females (P=0.6131) or males (P=0.0825) subjects. On age-specific racial comparison, AA girls (8-10 years) were skeletally more mature than CC girls (P=0.0143); over 14-year-old CC girls (P<0.0001) and over 16-year-old CC boys (P=0.0008), being skeletally more mature than AA boys of the same age. CONCLUSIONS: There was no significant difference between AA and CC subjects on gender-specific comparisons for most of the CVM stages. A significant difference of age was observed for most of the CVM stage between male and female subjects on race-specific comparisons. Female patients were ahead in skeletal maturity as compared to males for each CVM stage. The CVM for 8-12-year-old AA females was significantly higher than that of the CC females, whereas the CVM for>14-year-old CC females was significantly higher than AA females.

Comparison of anterior maxillary and mandibular alveolar parameters in African American and Caucasian women: A retrospective pilot study.

PURPOSE: The primary objective of this study was to analyze the thickness and height of alveolar bone around the maxillary and mandibular incisors. Additionally, this study aimed to compare bone parameters between Caucasian (CC) and African American (AA) female patients. MATERIALS AND METHODS: In this retrospective pilot study, 50 female subjects (25 CC and 25 AA) were included. The inclusion criteria were AA or CC women between the ages of 18 and 50 with a normo-divergent facial pattern and Angle's class I, end-on class II, or mild class III malocclusion. The distance from the cementoenamel junction (CEJ) to the buccal and lingual alveolar crest; the alveolar ridge thickness at the mid-root and apex; and the buccal and lingual bone thickness at 3, 6, and 9 mm from the CEJ were measured. RESULTS: No significant difference was found (P>0.05) in the cortical bone thickness at 3 mm, 6 mm, or 9 mm from the alveolar crest between CC and AA populations for most measurements. A significant difference in bone thickness was found (P<0.05) for the lingual surface of the central incisor, with maxillary bone thickness found to be higher than mandibular bone thickness. The measurements of lingual thickness were larger than those of buccal thickness for both races. CONCLUSION: There were no differences in maxillomandibular anterior alveolar bone measurements between normo-divergent adult AA and CC women, except for a few parameters at varying locations. However, future studies can be planned based the current pilot study data, which may provide valuable information.