Combined effects of hydrothermally-altered feldspar and water regime on cadmium minimization in rice.

The accumulation of cadmium (Cd) in grains and edible parts of crops poses a risk to human health. Because rice is the staple food of more than half of the world population, reducing Cd uptake by rice is critical for food safety. HydroPotash (HYP), an innovative potassium fertilizer produced with a hydrothermal process, has the characteristics of immobilizing heavy metals and potential use for remediating Cd-contaminated soils. The objective of this study was to evaluate the HYP as a soil amendment to immobilize Cd in acidic soils and to reduce the accumulation of Cd in rice tissues. The experiment was performed in a greenhouse with a Cecil sandy loam soil (pH 5.3 and spiked with 3 mg Cd kg-1) under either flooding conditions (water level at 4 cm above the soil surface) or at field capacity. Two hydrothermal materials (HYP-1 and HYP-2) were compared with K-feldspar + Ca(OH)2 (the raw material used for producing HYP), Ca(OH)2, zeolite, and a control (without amendment). After 30 days of soil incubation, HydroPotashs, the raw material, and Ca(OH)2 increased both soil solution pH and electrical conductivity. These materials also decreased soluble Cd concentration (up to 99.7%) compared with the control (p < 0.05). After 145 days, regardless of the materials applied, plant growth was favored (up to 35.8%) under the flooded regime. HydroPotash-1 was more effective for increasing dry biomass compared with other amendments under both water regimes. HydroPotashs reduced extractable Cd in soil, Cd content in plant biomass at tillering and maturing stage, and were efficient in minimizing Cd accumulation in rice grains.

Potentially toxic elements in iron mine tailings: Effects of reducing soil pH on available concentrations of toxic elements.

Tailings from iron mining are characterized by high concentrations of iron and manganese oxides, as well as high pH values. With these characteristics, most of the potentially toxic elements (PTE) contained in the tailings are somewhat unavailable. The aim of the present study was to evaluate how a reduction in the pH of iron mine tailings may affect PTE availabilities. The tailings were collected on the banks of the Gualaxo do Norte River (Mariana, MG, Brazil), one of the main areas impacted by the rupture of the Fundão Dam (Barragem de Fundão). A completely randomized experimental design was used, including five pH values (6.4, 5.4, 4.3, 3.7, and 3.4) and five replications. The concentrations of the PTE (Ba, Cr, Cd, Co, Cu, Fe, Mn, Pb, Ni, and Zn) were determined after extraction following different methodologies: USEPA 3051A, DTPA, Mehlich-1, Mehlich-3, and distilled water. A comparison of the available concentrations of the elements in the tailings with those in a soil not impacted by tailings shows that Cr, Cd, Cu, Fe, Mn, Ni, Ba, and Co were higher in the soil impacted by the tailings. The different methods used for evaluating the availability of PTE in the tailings at various pH exhibited the following decreasing order in relation to the quantity extracted: Mehlich-3 > Mehlich-1 > DTPA > distilled water. However, regarding sensitivity to change in pH, the order was DTPA > water > Mehlich-1 > Mehlich-3. The increases in the concentrations of PTE due to the reduction in the pH of the tailings did not lead to concentrations that exceed the limits of Brazilian regulations. The DTPA extractant exhibited higher coefficients of correlation between the PTE concentrations and the pH of the tailings, proving to be suitable for use in areas affected by the deposition of iron mine tailings.

Environmental and human-health risks of As in soils with abnormal arsenic levels located in irrigated agricultural areas of Paracatu (MG), Brazil.

The municipality of Paracatu (Brazil) is notorious for its large irrigated agricultural area and by abnormal arsenic (As) levels in selected soils of the region. Concerns regarding As exposure via ingestion of water and food are frequent, yet little is known about the behavior of arsenic in irrigated agricultural soils, as well as on As bioaccessibility/bioavailability in agroecosystems of this region. This work evaluated total and available As in agricultural soils cultivated under irrigation and in soils under native vegetation in Paracatu. We also assessed reactive arsenic fractions and As bioaccessibility in the soil, as well as arsenic levels in plant shoots to estimate As risks in these agroecosystems. Soil (different depths) and plant tissue samples were collected in 6 irrigated agricultural areas (CA1 to CA6) and 4 reference areas (RA1 to RA4). Total soil-As did not differ between soil depths, reinforcing that the source of As in agricultural soils is natural. This was evident when counterpointing arsenic and phosphorus contents at different soil depths, as both accumulate on the surface of oxidic soils when added to agroecosystems by anthropogenic routes (e.g., phosphate fertilization for P and irrigation for As). Available As levels in soils and plants were very small (below detection limit). Furthermore, all soils presented very low oral As bioaccessibility. Our findings revealed that the irrigated soils are not As polluted due to the low enrichment and accumulation of arsenic, as well as the prevalence of low ecological risks. There is no non-carcinogenic risk for the local population, except for children in RA2. The estimated carcinogenic risk for children followed the order RA2 > CA3 > CA4 > RA3 > CA2, and for adults, RA2 > CA3. Ultimately, the strategy of comparing the behavior of P and As in the soils of this study proved to be efficient in showing that there are no major risks to humans and the environment in the investigated area. However, periodic monitoring of As bioavailability in these areas is recommended.

Hydrothermally-altered feldspar as an environmentally-friendly technology to promote heavy metals immobilization: Batch studies and application in smelting-affected soils.

Hydrothermally-altered feldspar (HydroPotash, HYP) possesses, among other physicochemical properties, high pH buffering and cation exchange capacity. Therefore, it may potentially remove heavy metals from aqueous solutions and immobilize these metals in contaminated soil. This study aimed to evaluate the capabilities of two types of HydroPotash (HYP-1 and HYP-2) and a zeolite sample (a commercial adsorbent) for immobilizing cadmium (Cd), zinc (Zn), and lead (Pb) from both aqueous solution and contaminated soils from a Zn-smelting area (classified as soilhigh, soilintermediate, and soillow based on their level of soluble metal concentration). Sorption studies in natural suspension pH showed that HYPs removed 63.8-99.9% Zn, 20.6-40.7% Cd, and 68.4-99.7% Pb from aqueous solution. In the batch test with controlled pH (at pH 5.5), HYPs sorbed more Cd than zeolite. Analyses of scanning electron microscopy-energy dispersive X-ray spectroscopy after desorption showed the presence of Pb at HYP-2, indicating that this metal was effectively adsorbed. In soilhigh HYPs immobilized 99.9% of Zn, Cd, and Pb after one week of soil incubation with these products. The HYPs immobilization effect persisted up to 84 days of soil incubation with these products. The increased soil pH promoted by HYPs appears to be the main factor controlling metal sorption. In conclusion, HydroPotash can be used as an adsorbent/amendment to effectively immobilize heavy metals in both water and contaminated soils by precipitation and adsorption. Our findings indicate the high potential of this material for Cd, Zn, and Pb stabilization, which is of great relevance when recovering areas affected by mining/smelting activities with multi-element contamination.

Bioavailability of copper and nickel in naturally metal-enriched soils of Carajás Mining Province, Eastern Amazon, Brazil.

Naturally elevated contents of copper (Cu) and nickel (Ni) are found in soils worldwide, and their potential toxicity is better understood when geochemical reactive fractions are identified and monitored. Thus, this study aimed to assess the bioavailability of Cu and Ni and estimate environmental risks in naturally metal-enriched soils of Carajás Mining Province, Eastern Amazon, Brazil. For that, 58 surficial soil samples were analyzed for their extractable contents of Cu and Ni by Mehlich 1. Next, 13 soil samples were selected for additional single and sequential extractions, for the determination of metal content in the shoots of grasses naturally growing in these soils and for calculating the risk assessment code. Despite the naturally high total concentrations, the contents of easily available Cu and Ni are a minor fraction of total concentrations (up to 10.15%), and the reducible oxide and residual pools hold the major proportion of total content of metals. This contributed to low bioavailability, low environmental risk, and also to low concentrations of these metals on grasses collected in the field. Soil organic matter, Fe2O3, Al2O3 and clay content have a dominant role in metals retention on studied soils. Our findings on the bioavailability of Cu and Ni in a region of great economic relevance for Brazil are important not only for predicting the elements' behavior in the soil-plant system but also for refining risk assessments and to provide useful data for environmental quality monitoring.

Chemical, physical, and biological attributes in soils affected by deposition of iron ore tailings from the Fundão Dam failure.

Monitoring degraded areas is essential for evaluation of the quality of the rehabilitation process. In this study, we evaluate how the physical and chemical characteristics of the mixture of iron ore tailings with the soil have affected the soil microbial biomass and activity in areas along the Gualaxo do Norte River after the Fundão Dam disaster. Composite soil samples were collected from areas that were impacted (I) and not impacted (NI) by the tailings. The following attributes were evaluated: chemical element content; soil density, porosity, and texture; microbial biomass carbon; basal respiration; and enzyme activity and density of microbial groups (bacteria, actinobacteria, fungi, arbuscular mycorrhizae, phosphate solubilizers, cellulolytic microorganisms, nitrifiers, ammonifiers, and diazotrophs). According to result, the deposition of tailings increased the pH and the soil available P, Cr, Fe, and Mn content and reduced organic matter. The physical and biological attributes were negatively affected, with increases in the silt content and density of the soil, and reduction in macroporosity and in the microbial biomass and activity of the soil (respiration and enzymes) in the impacted area. However, the impacted areas exhibited greater densities of some microbial groups (cellulolytic microorganisms, nitrifiers, and diazotrophic bacteria). Modifications in the organic matter and silt content are the main attributes associated with deposition of the tailings that affected soil microbial biomass and microbial activity. This may affect erosive conditions and the functionality of the ecosystem, indicating an imbalance in this environment. In contrast, the higher density of some microbial groups in the impacted areas show the high rehabilitation potential of these areas.

Combining biochar and sewage sludge for immobilization of heavy metals in mining soils.

Excess heavy metal concentrations in mining areas is a worldwide problem due to their toxicity and persistence. Applying amendments to those areas is a cost-effective remediation technique that would aid revegetation efforts. The aim of this work was to study the ability of sewage sludge-derived biochar (SSB), wood charcoal powder (hereafter named wood biochar - WB), raw sewage sludge (SS), and their blending (WB/SS) to improve soil properties and to immobilize Cd, Pb, and Zn after their addition to heavy-metal contaminated soils from a Zn-mining area. Biochar was prepared from dried sewage sludge and a greenhouse experiment was set using different amendment doses (WB = 30 and 60 g kg-1, SS = 10 and 20 g kg-1). Addition of wood biochar and sewage sludge-derived biochar to soils led to increased leachate and soil pH. Biochar materials were responsible for the greatest reduction of Cd, Pb, and Zn bioavailability. The use of sewage sludge-derived biochar or the combination of sewage sludge with wood biochar in mining areas are potential alternatives for reusing and aggregating value to these locally available wastes, offering an opportunity to solve both soil remediation and waste disposal problems at once.

Amending potential of organic and industrial by-products applied to heavy metal-rich mining soils.

Mining activities promote the development of economies and societies, yet they cause environmental impacts that must be minimized so that their benefits overcome the likely risks. This study evaluated eco-friendly technologies based on the use of low-carbon footprint wastes and industrial by-products as soil amendments for the revegetation of Zn-mining areas. Our goal was to select adequate soil amendments that can be used to recover these areas, with a focus on low-cost materials. The amendments - limestone, sewage sludge, biochar, and composted food remains - were first characterized concerning their chemical composition and structural morphologies. Soil samples (Entisol, Oxisol, Technosol) from three different areas located inside an open-pit mine were later incubated for 60 days with increasing doses of each soil amendment, followed by cultivation with Andropogon gayanus, a native species. The amendments were able to change not only soil pH, but also the phytoavailable levels of Cd, Zn, and Pb. Limestone and biochar were the amendments that caused the highest pH values, reducing the phytoavailability of the metals. All amendments improved seed germination; however, the composted food remains presented low levels of germination, which could make the amendments unfeasible for revegetation efforts. Our findings showed that biochar, which is a by-product of the mining company, is the most suitable amendment to enhance revegetation efforts in the Zn-mining areas, not only because of its efficiency and cost, but also due to its low carbon footprint, which is currently the trend for any "green remediation" proposal.

Selenium protects rice plants from water deficit stress.

Selenium (Se) is essential to humans and animals due to its antioxidant properties. Although it is not considered an essential nutrient for higher plants. Many studies show that Se in low concentrations (up to 0.5 mg kg-1) provides beneficial effects to non-hyperaccumulating plants by participating in antioxidant defense systems and enhancing tolerance to abiotic stress. Therefore, this study aimed to evaluate the effects of Se application rates on rice plants under different soil water conditions. The experiment was conducted on an Oxisol using four Se rates (0, 0.5, 1.0 and 2.0 mg kg-1) and two soil water conditions (irrigated and water deficit). Selenium application via soil up to 0.5 mg kg-1 increased the plant height, chlorophyll index, sulfur and copper accumulation in shoots, carbon dioxide assimilation, superoxide dismutase (EC 1.15.1.1) activity and decreased the hydrogen peroxide concentration in rice leaves. The accumulation of Se in shoot biomass and Se concentration in seeds increased linearly with the applied rates. Water deficit strongly decreased the plant growth and yield. However, rice plants treated with Se showed higher net photosynthesis, water use efficiency and antioxidant system. This study provides useful information about the roles of Se in protecting rice plants from water deficit stress.

Genotypic Variation and Biofortification with Selenium in Brazilian Wheat Cultivars.

Selenium is essential to human and animal health, as it regulates glutathione peroxidase activity. Although not considered essential to plants, it may be beneficial to plant growth and development at low concentrations. This study evaluated the effect of selenate application on Se biofortification, macro- and micronutrient content, and the expression of genes involved in Se uptake and assimilation in 12 Brazilian wheat ( L.) cultivars. This nutrient-solution experiment was performed in a greenhouse and consisted of a complete 12 × 2 factorial randomized design, with 12 wheat cultivars in the absence or presence of Se in solution (13 µmol), with three replicates. The presence of Se in solution did not affect growth and yield of wheat cultivars. Selenium content and accumulation in the grain varied significantly among the different cultivars. The presence of Se affected macronutrient content more than micronutrient content, and selenate application increased S content in the shoots of eight cultivars and in the grains of five cultivars. Examination of gene expression did not allow identification of responses within the two groups of cultivars-with high or low Se contents-after selenate application. Our findings are relevant to the design of Se biofortification strategies for wheat in tropical and subtropical agroecosystems.

Assessment of the reproduction of six collembolan species in tropical soils naturally rich in potentially toxic elements.

Laboratory ecotoxicological tests are important tools for the management of environmental changes derived from anthropogenic activities. Folsomia candida is usually the model species used in some procedures. However, this species may not be sufficiently representative of the sensitivity of the other collembolan species. This study aimed to evaluate (i) the effects of soils naturally rich in potentially toxic elements (PTE) and soil characteristics on the reproduction and survival of different collembolan species, (ii) whether the habitat function of these soils is compromised, and (iii) to what extent F. candida is representative of the other collembolan species. For this, reproduction tests with six collembolan species were conducted in 14 different samples of soils. In general, collembolan reproduction was not completely inhibited in none of the natural tested soils. Even soils with high pollution load index values did not negatively affect collembolan reproduction for most of the species. In contrast, the lowest collembolan reproduction rates were found in a visually dense soil (lowest volume/weight ratio), highlighting that soil attributes other than total PTE concentration also interfere in the reproduction of collembolans. Our results support the idea that the F. candida species might not be representative of other collembolan species and that laboratory tests to assess soil contaminations should be conducted using diverse collembolan species.

Biostimulant Response of Foliar Application of Rare Earth Elements on Physiology, Growth, and Yield of Rice.

Rare earth elements (REEs) have been intentionally used in Chinese agriculture since the 1980s to improve crop yields. Around the world, REEs are also involuntarily applied to soils through phosphate fertilizers. These elements are known to alleviate damage in plants under abiotic stresses, yet there is no information on how these elements act in the physiology of plants. The REE mode of action falls within the scope of the hormesis effect, with low-dose stimulation and high-dose adverse reactions. This study aimed to verify how REEs affect rice plants' physiology to test the threshold dose at which REEs could act as biostimulants in these plants. In experiment 1, 0.411 kg ha-1 (foliar application) of a mixture of REE (containing 41.38% Ce, 23.95% La, 13.58% Pr, and 4.32% Nd) was applied, as well as two products containing 41.38% Ce and 23.95% La separately. The characteristics of chlorophyll a fluorescence, gas exchanges, SPAD index, and biomass (pot conditions) were evaluated. For experiment 2, increasing rates of the REE mix (0, 0.1, 0.225, 0.5, and 1 kg ha-1) (field conditions) were used to study their effect on rice grain yield and nutrient concentration of rice leaves. Adding REEs to plants increased biomass production (23% with Ce, 31% with La, and 63% with REE Mix application) due to improved photosynthetic rate (8% with Ce, 15% with La, and 27% with REE mix), favored by the higher electronic flow (photosynthetic electron transport chain) (increase of 17%) and by the higher Fv/Fm (increase of 14%) and quantum yield of photosystem II (increase of 20% with Ce and La, and 29% with REE Mix), as well as by increased stomatal conductance (increase of 36%) and SPAD index (increase of 10% with Ce, 12% with La, and 15% with REE mix). Moreover, adding REEs potentiated the photosynthetic process by increasing rice leaves' N, Mg, K, and Mn concentrations (24-46%). The dose for the higher rice grain yield (an increase of 113%) was estimated for the REE mix at 0.72 kg ha-1.

A study on nickel application methods for optimizing soybean growth.

Fertilization with nickel (Ni) can positively affect plant development due to the role of this micronutrient in nitrogen (N) metabolism, namely, through urease and NiFe-hydrogenase. Although the application of Ni is an emerging practice in modern agriculture, its effectiveness strongly depends on the chosen application method, making further research in this area essential. The individual and combined effects of different Ni application methods-seed treatment, leaf spraying and/or soil fertilization-were investigated in soybean plants under different edaphoclimatic conditions (field and greenhouse). Beneficial effects of the Soil, Soil + Leaf and Seed + Leaf treatments were observed, with gains of 7 to 20% in biological nitrogen fixation, 1.5-fold in ureides, 14% in shoot dry weight and yield increases of up to 1161 kg ha-1. All the Ni application methods resulted in a 1.1-fold increase in the SPAD index, a 1.2-fold increase in photosynthesis, a 1.4-fold increase in nitrogenase, and a 3.9-fold increase in urease activity. Edaphoclimatic conditions exerted a significant influence on the treatments. The integrated approaches, namely, leaf application in conjunction with soil or seed fertilization, were more effective for enhancing yield in soybean cultivation systems. The determination of the ideal method is crucial for ensuring optimal absorption and utilization of this micronutrient and thus a feasible and sustainable management technology. Further research is warranted to establish official guidelines for the application of Ni in agricultural practices.

Towards direct and eco-friendly analysis of plants using portable X-ray fluorescence spectrometry: A methodological approach.

The assessment of the nutritional status of plants is traditionally performed by wet-digestion methods using oven-dried and ground samples. This process requires sampling, takes time, and it is non-environmentally friendly. Agricultural and environmental science have been greatly benefited by in-field, ecofriendly methods, and real-time element measurements. This work employed the portable X-ray fluorescence spectrometry (pXRF) to analyze intact and fresh leaves of crops aiming to assess the effect of water content and leaf surface (adaxial and abaxial) on pXRF results. Also, pXRF data were used to predict the real concentration of macro- and micronutrients. Eight crops (bean, castor plant, coffee, eucalyptus, guava tree, maize, mango, and soybean) with contrasting water contents were used. Intact leaf fragments (∼2 × 2 cm), fresh or oven-dried (60 °C) were obtained to be analyzed via pXRF on both adaxial and abaxial surface. Conventional wet-digestion method was also performed on powdered material to obtain the concentration of macro- and micronutrients via ICP-OES. The data were subjected to descriptive statistics, principal component analysis (PCA) and random forest (RF) algorithm regression. RF was used to predict the real concentration of macro- and micronutrients based on pXRF measurements obtained directly on intact leaves. Water content had a significant effect on pXRF results. However, a positive correlation between the concentration of macro- and micronutrients obtained via pXRF directly on intact leaves and conventional analysis performed on powdered samples was obtained. PCA analysis allowed a clear differentiation of crops based on elemental composition. The concentrations of macro- and micronutrients were very accurately predicted via RF. Even elements not detected by pXRF (N and B) were satisfactory predicted. From this pilot study, it is possible to concluded that pXRF is feasible for in-field assessment of nutritional status of plants. Further studies are needed to obtain specific and robust calibrations for each crop.

Selenium Speciation in Se-Enriched Soybean Grains from Biofortified Plants Grown under Different Methods of Selenium Application.

Since soybean is widely cultivated around the world and has a high protein content, it is a great nutritional vehicle for increasing the dietary uptake of selenium (Se). Several studies have evaluated biofortification with Se through fertilizer application in several crops. However, it is not clear how each method and source affect the total Se content or Se species in soybean grains. This work aimed to assess the total Se content and Se speciation in Se-enriched soybean grains produced under different Se application methods in the field. The treatments consisted of Se application (soil or foliar), using organic or inorganic Se sources at 10 g ha-1 or 80 g ha-1, in two genotypes. The results showed that all treatments with inorganic Se (soil and foliar) increased the Se content in grains compared with the control. More than 80% of the total Se in grains was present as selenomethionine (SeMet), and the speciation was affected by the Se source and the method of application. The treatments using inorganic Se, applied via soil or foliar, produced the highest content of Se as SeMet in soybean grains. Finally, we propose that the preservation of the Se species in products derived from soybean grains be evaluated as the following step.

Iron counteracts zinc-induced toxicity in soybeans.

Zinc (Zn) and iron (Fe) are essential micronutrients for all living organisms and the major targets for crop biofortification. However, when acquired in excess quantities, Zn and Fe can be toxic to plants. In this study, we examined the interaction between Zn and Fe in soybean plants under various Zn and Fe treatments. While the level of Zn accumulation increased with increasing Zn supplies, Zn content greatly decreased with rising Fe supplies. Moreover, Zn uptake rates were negatively correlated with Fe supplies. However, Fe accumulation was not greatly affected by elevating Zn supplies. Excess Zn supplies were found to induce typical Fe deficiency symptoms under low Fe conditions, which can be counteracted by increasing Fe supplies. Interestingly, leaf chlorosis caused by excess Zn and low Fe supplies was not directly associated with reduced total Fe content but likely associated with deleterious effects of excess Zn. The combination of high Zn and low Fe greatly activates FRO2 and FIT1 gene expression in soybean roots. Besides, Zn-Fe interaction influences the activities of antioxidative enzymes as well as the uptake, accumulation, and homeostasis of other essential micronutrients, such as copper and manganese in soybean plants. These findings provide new perspectives on Zn and Fe interaction and on heavy metal-induced Fe deficiency-like symptoms.

Soybean Plants Exposed to Low Concentrations of Potassium Iodide Have Better Tolerance to Water Deficit through the Antioxidant Enzymatic System and Photosynthesis Modulation.

Water deficit inhibits plant growth by affecting several physiological processes, which leads to the overproduction of reactive oxygen species (ROS) that may cause oxidative stress. In this regard, iodine (I) is already known to possibly enhance the antioxidant defense system of plants and promote photosynthetic improvements under adverse conditions. However, its direct effect on water deficit responses has not yet been demonstrated. To verify the efficiency of I concerning plant tolerance to water deficit, we exposed soybean plants to different concentrations of potassium iodide (KI) fed to pots with a nutrient solution and subsequently submitted them to water deficit. A decline in biomass accumulation was observed in plants under water deficit, while exposure to KI (10 and 20 µmol L-1) increased plant biomass by an average of 40%. Furthermore, exposure to KI concentrations of up to 20 µM improved gas exchange (~71%) and reduced lipid peroxidation. This is related to the higher enzymatic antioxidant activities found at 10 and 20 µM KI concentrations. However, when soybean plants were properly irrigated, KI concentrations greater than 10 µM promoted negative changes in photosynthetic efficiency, as well as in biomass accumulation and partition. In sum, exposure of soybean plants to 10 µM KI improved tolerance to water deficit, and up to this concentration, there is no evidence of phytotoxicity in plants grown under adequate irrigation.

Foliar Selenium Application to Reduce the Induced-Drought Stress Effects in Coffee Seedlings: Induced Priming or Alleviation Effect?

This study aimed to investigate the role of Se supply in improving osmotic stress tolerance in coffee seedlings while also evaluating the best timing for Se application. Five times of Se foliar application were assessed during induced osmotic stress with PEG-6000 using the day of imposing stress as a default, plus two control treatments: with osmotic stress and without Se, and without osmotic stress and Se. Results demonstrated that osmotic stress (OS) promoted mild stress in the coffee plants (ψw from -1.5MPa to -2.5 MPa). Control plants under stress showed seven and five times lower activity of the enzymes GR and SOD compared with the non-stressed ones, and OS was found to further induce starch degradation, which was potentialized by the Se foliar supply. The seedlings that received foliar Se application 8 days before the stress exhibited higher CAT, APX, and SOD than the absolute control (-OS-Se)-771.1%, 356.3%, and 266.5% higher, respectively. In conclusion, previous Se foliar spray is more effective than the Se supply after OS to overcome the adverse condition. On the other hand, the post-stress application seems to impose extra stress on the plants, leading them to reduce their water potential.

Sulfate supply decreases barium availability, uptake, and toxicity in lettuce plants grown in a tropical Ba-contaminated soil.

Barium (Ba) is a non-essential element that can cause toxicity in living organisms and environmental contamination. Plants absorb barium predominantly in its divalent cationic form Ba2+. Sulfur (S) can decrease the availability of Ba2+ in the soil by causing its precipitation as barium sulfate, a compound known for its very low solubility. The objective of this study was to evaluate the effect of soil sulfate supply in soil Ba fractions, as well as on plant growth, and Ba and S uptake by lettuce plants grown in artificially Ba-contaminated soil under greenhouse conditions. The treatments consisted of five Ba doses (0, 150, 300, 450, and 600 mg kg-1 Ba, as barium chloride) combined with three S doses (0, 40, and 80 mg kg-1 S, as potassium sulfate). The treatments were applied to soil samples (2.5 kg) and placed in plastic pots for plant cultivation. The Ba fractions analyzed were extractable-Ba, organic matter-Ba, oxides associated-Ba, and residual-Ba. The results indicate that the extractable-Ba fraction was the main one responsible for Ba bioavailability and phytotoxicity, probably corresponding to the exchangeable Ba in the soil. The dose of 80 mg kg-1 of S reduced extractable-Ba by 30% at higher Ba doses while it increased the other fractions. Furthermore, S supply attenuated the growth inhibition in plants under Ba exposure. Thus, S supply protected the lettuce plants from Ba toxicity by reduction of Ba availability in soil and plant growth enhancement. The results suggest that sulfate supply is a suitable strategy for managing Ba-contaminated areas.

Foliar Application of Selenium Associated with a Multi-Nutrient Fertilizer in Soybean: Yield, Grain Quality, and Critical Se Threshold.

Selenium uptake and its content in soybean grains are affected by Se application methods. This study evaluated the impact of Se foliar application combined with a multi-nutrient fertilizer (MNF) on soybean, establishing a Se threshold to better understand the relationship between Se content in grains and yield of two genotypes (58I60 Lança and M5917). Two trials were conducted in a 4 × 2 factorial design: four Se rates (0, 10, 40, 80 g Se ha-1) and two methods of foliar Se application (Se combined or not with MNF). Foliar fertilizers were applied twice, at phenological stages of beginning of pod development and grain filling. Grain yield increased with the application of MNF, yet Se rates increased Se contents linearly up to 80 g Se ha-1, regardless of the use of MNF. Lança and M5917 genotypes had grain Se critical thresholds of 1.0 and 3.0 mg kg-1, respectively. The application of Se favored higher contents of K, P, and S in grains of genotype Lança and higher contents of Mn and Fe in grains of genotype M5917. Our findings highlight the importance of addressing different Se fertilization strategies as well as genotypic variations when assessing the effects of Se on soybean yield and grain quality.